DC/DC CONVERTERS E Class Non-isolated 1
SIL10E Series
12Vin single output
NEW Product
File Name: SIL10E_12.PDF Rev: 27 Nov 2003
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS
•10A Current rating
•Input voltage range: 10V to 14V
•Output voltage range: 0.8V to 3.63V
•Ultra high efficiency: 94% @ 12Vin and 3.3Vout
•Extremely low internal power dissipation
•Minimal thermal design concerns
•Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
•Ideal solution where board space is at a premium
or tighter card pitch is required
•Industry standard footprint and pin out
The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint
giving designers a cost effective solution for conversion from a 12V source. The SIL10E
offers a range of fixed outputs and one wide trim output unit at an industry leading 10A
which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is
designed for applications that include distributed power, workstations, optical network and
wireless applications. Implemented using state of the art surface mount technology and
automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up
to 94%.
OUTPUT SPECIFICATIONS
Voltage adjustability Fixed output version ±10%
12Vin with wide trim 0.8V to 3.63V
Setpoint accuracy ±0.4% typ.
Line regulation ±0.2% typ.
Load regulation ±1.0% max.
Temperature co-efficient ±0.01%/ºC
Total error band ±3.0% typ.
Minimum load 0A
Overshoot/undershoot None
Ripple and noise 80mV pk-pk
0 to 20MHz bandwidth 25mV rms max.
Transient response 100mV max. deviation
100µs recovery to
within ±1.0%
Remote sense 10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range 10 to 14VDC
Input current No load 70mA
Input current (max.) 3.5A max. @ Io max.
and Vout = 3.3V
Input ripple current 120mA
Remote ON/OFF (See Note 1)
Start-up time 35mS
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency See table
Insulation voltage Non-isolated
Switching frequency Fixed 200kHz typ.
Approvals and EN60950
standards UL/cUL60950
Material flammability UL94V-0
Dimensions (LxWxH) 50.8 x 7.8 x 12.7mm
(Vertical model) 2.0 x 0.31 x 0.5 inches
Weight 5g (0.18oz)
MTBF Telcordia 332 7,042,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40ºC to +85ºC
(See Note 2) temperature
Non-operating -40ºC to +125ºC
PROTECTION
Short-circuit protection Continuous
Thermal protection Automatic recovery
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E174104
UL 60950 file No. E174104
TÜV Product Service (EN60950) Certificate No. B 03 10 38572 037
CB report and certificate to DE3-51686M1
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
Notes
1The SIL10E features an ‘Positive Logic’ remote ON/OFF operation. If not
using the remote ON/OFF pin, leave the pin open (the converter will be
on). The remote ON/OFF pin is referenced to ground.
The following conditions apply for the SIL10E:
Configuration Converter Operation
Remote pin open circuit Unit is ON
Remote pin pulled low [Von/off <0.8V] Unit is OFF
Remote pin pulled high [Von/off >1.6V] Unit is ON
An ‘Negative Logic’ remote ON/OFF version is also possible with this
converter. To order please place the suffix ‘-R’ at the end of the model
number, e.g. SIL10E-12S3V3-VR.
2Full de-rating curves available in both the Long Form Data Sheet and
Application Note.
3For Horizontal mounting option, please consult factory for details.
SIL10E Series
12Vin single output
DC/DC CONVERTERS E Class Non-isolated 2
NEW Product
File Name: SIL10E_12.PDF Rev: 27 Nov 2003
SIL10E-12S3V3-V
Part Number System with Options
Product Family
SIL = Single Inline
Rated Output Current
10 = 10Amps
Input Voltage
12 = 10V - 14V
Type of Output
S = Single
W = Wide
Output Voltage
1V2 = 1.2V, 1V5 = 1.5V, 1V8 = 1.8V,
2V5 = 2.5V, 3V3 = 3.3V
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL10E-12W3V3. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8V to 3.63V. When the SIL10E-12W3V3 converter
leaves the factory the output has been adjusted to the default voltage of 0.8V
Output Voltage Adjustment of the SIL10E-12W3V3 Series
Performance
E= Enhanced Performance
OUTPUT
INPUT OUTPUT
OUTPUT OUTPUT
EFFICIENCY REGULATION MODEL
POWER
VOLTAGE VOLTAGE
CURRENT CURRENT
(TYP.) LINE LOAD NUMBER (3)
(MAX.) (MIN.) (MAX.)
13.2W 10V - 14V 1.2V 0A 10A 84% ±0.2% ±1.0% SIL10E-12S1V2-V
16.5W 10V - 14V 1.5V 0A 10A 86% ±0.2% ±1.0% SIL10E-12S1V5-V
19.8W 10V - 14V 1.8V 0A 10A 88% ±0.2% ±1.0% SIL10E-12S1V8-V
27.5W 10V - 14V 2.5V 0A 10A 91% ±0.2% ±1.0% SIL10E-12S2V5-V
36.3W 10V - 14V 3.3V 0A 10A 94% ±0.2% ±1.0% SIL10E-12S3V3-V
36.3W 10V - 14V 0.8V - 3.63V 0A 10A 94% ±0.2% ±1.0% SIL10E-12W3V3-V
Mounting Option
V = Vertical
H= Horizontal
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
SIL10E Series
12Vin single output
DC/DC CONVERTERS E Class Non-isolated 3
NEW Product
1.900 (48.26)
0.050 (1.27)
0.100 (2.54)
2.000 (50.80)
FRONT VIEW
0.500 (12.70)
0.635 (16.13)
0.135 (3.43)
PCB
0.168 (4.26)
SIDE VIEW
0.307 (7.80)
J1 J2
15432 15632
Note: Sense Pin is a
customer specified option
All dimensions in inches (mm)
All tolerance ±0.010in (±0.25mm)
unless otherwise stated
0.220 (5.50) max
Data Sheet © Artesyn Technologies
®
2003
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com
File Name: SIL10E_12.PDF Rev: 27 Nov 2003
J1 PIN CONNECTIONS
PIN NUMBER FUNCTION
1+Vout
2+Vout
3Remote Sense (+)*
4+Vout
5Ground
J2 PIN CONNECTIONS
PIN NUMBER FUNCTION
1Ground
2+Vin
3+Vin
4No Pin
5Trim
6Remote ON/OFF
*The sense function is customer specified option and comes as standard.
Please consult factory for details.
