EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Technical Data Sheet
0.4mm Height Chip LED with Bi-Color(Multi-Color)
19-226SURSYGC/S530-A2/TR8
Features
Package in 8mm tape on 7diameter reel.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow
solder process.
Mulit-color type.
Pb free.
The product itself will remain within RoHS compliant
version.
Descriptions
The 19-226 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
Automotive: backlighting in dashboard and switch.
Telecommunication: indicator and backlighting in
telephone and fax.
Flat backlight for LCD, switch and symbol.
General use.
Device Selection Guide
Chip
Type Material Emitted Color
Lens Color
SUR AlGaInP Hyper Red
SYG AlGaInP Super Yellow Green Water Clear
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Package Outline Dimensions
1.6
1.0
4
1
32
1
23
4
1.1
1.3
0.8
Cathode mark
0.8
2.4
0.15
1.15
0.15
1.15
2
14
3
0.4
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Absolute Maximum Ratings (Ta=25)
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF SUR:25
SYG:25 mA
Operating Temperature Topr -40 ~ +85
Storage Temperature Tstg -40 ~ +90
Soldering Temperature Tsol 260
(for 5 seconds)
Electrostatic Discharge ESD SUR:2000
SYG:2000 V
Power Dissipation Pd SUR:60
SYG:60 mW
Peak Forward Current
(Duty 1/10 @1KHz) IFP SUR:60
SYG:60 mA
Electro-Optical Characteristics (Ta=25)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv SUR
SYG
22
9.0 35
13 ----- mcd
Viewing Angle 2θ1/2 ----- 120 ----- deg
Peak Wavelength λp SUR
SYG ----- 632
575 ----- nm
Dominant Wavelength λd SUR
SYG ----- 624
573 ----- nm
Spectrum Radiation
Bandwidth △λ ----- 20 -----
nm
Forward Voltage VF SUR
SYG ----- 2.0
2.0
2.4
2.4 V
IF=20mA
Reverse Current IR ----- ----- 10 μA VR=5V
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Typical Electro-Optical Characteristics Curves
SUR
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Typical Electro-Optical Characteristics Curves
SYG
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag LabelDesiccant
Label
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level90%
LTPD10%
No. Items Test Condition
Test
Hours/Cycles Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 260℃±5
Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100 15min
5 min
L : -40 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100 5min
10 sec
L : -10 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
EVERLIGHT ELECTRONICS CO.,LTD.
19-226SURSYGC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 10
Device No:DSE-926-005 Prepared date: 07-26-2005 Prepared by: Jeff Tsai
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com