MCC TM Micro Commercial Components SMAJ5.0 THRU SMAJ440CA omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * * * * For Surface Mount Applications Unidirectional And Bidirectional Low Inductance High Temp Soldering: 260C for 10 Seconds At Terminals For Bidirectional Devices Add "C" To The Suffix of The Part Number: i.e.SMAJ5.0CA for 5% Tolerance Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) UL Recognized File # E331408 0HFKDQLFDO'DWD * * * 400 Watt Transient Voltage Suppressors 5.0 to 440 Volts DO-214AC (SMA)( LEAD FRAME) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Polarity: Indicated by cathode band except bi-directional types A B 0D[LPXP5DWLQJ * * * Operating Temperature: -55C to +175C Storage Temperature: -55C to +175C Typical Thermal Resistance: 100 /W Junction to Ambient C F H D Peak Pulse Current on 10/1000 IPPM G See Table 1 Note 2 E DIMENSIONS Peak Pulse Power Dissipation Steady State Power Dissipation Peak Forward Surge Current Note: PPPM PM(AV) IFSM Min 400 W 1.5 W 40A Note 2, 6 Note 2, 5 Note:5 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. 2. Non-repetitive current pulse, per Fig.3 and derated above TA=25 per Fig.2. 3. Mounted on 5.0mm2 copper pads to each terminal. 4. 8.3ms, single half sine wave duty cycle = 4 pulses per Minutes maximum. 5. Lead temperature at TL = 75 . 6. Peak pulse power waveform is 10/1000 . DIM A B C D E F G H INCHES MIN .157 .098 .006 .030 .188 .078 .055 .002 MAX .181 .114 .012 .060 .208 .096 .062 .008 MM MIN 4.00 2.50 0.152 0.76 4.80 2.00 1.40 0.051 MAX 4.60 2.90 0.305 1..52 5.28 2.44 1.60 0.203 NOTE SUGGESTED SOLDER PAD LAYOUT 0.090 " MA X 0.058 " MI N 0.070" MI N www.mccsemi.com 1 of 4 Revision: E 2012/09/07 MCC TM SMAJ5.0 thru SMAJ440CA Micro Commercial Components PEAK PULSE POWER(Ppp) OR CURRENT(Ipp) DERATING IN PERCENTAGE % PPPM , PEAK PULSE POWER, KW 100 100 NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 3 TA = 25 C 10 1.0 MOUNTED ON 5.0mm 2 COPPER LAND AREAS 0.1 0.1us 1.0 us 10 us 100 us 1.0ms 75 50 25 0 10ms 0 25 td, PULSE WIDTH, SEC 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, C Fig. 1-PEAK PULSE POWER RATING CURVE Fig. 2-PULSE RATING CURVE 10,000 40,000 150 20,000 Pulse Width(td) is Defined as the Point Where the Peak Current sec CJ, CAPACITANCE, pF Ippm, PEAK PULSE CURRENT, % TA = 25 C tf = 10 Decays to 50% of lpp Peak Value Ippm 100 Half Value- Ipp 2 10/1000 50 TJ = 25 C f = 1.0MHz Vsig = 50mVp-p sec Waveform as Defined by R.E.A. MEASURED AT ZERO BIAS 1,000 6,000 4,000 2,000 100 MEASURED AT STAND-OFF VOLTAGE(VMW) 500 200 0 e-kt td 0 1.0 2.0 3.0 10 1.0 4.0 Ifsm, PEAK FORWARD SURGE CURRENT, AMPERES 50 TJ = TJ max 8.3mss SINGLE HALF SINCE-WAVE JEDEC METHOD 30 20 10 1 4 10 20 40 100 NUMBER OF CYCLES AT 60Hz Fig. 5-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PM(AV), STEADY STATE POWER DISSIPATION (W) Fig. 3-PULSE WAVEFORM 0 5.0 10 20 50 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS t, TIME , ms 40 2.0 Fig. 4-TYPICAL JUNCTION CAPACITANCE 1.5 1.2 0.9 0.6 0.3 0.0 0 25 50 75 100 125 150 175 TL, LEAD TEMPERATURE (C) 200 Fig.6-Steady State Power Derating Curve Revision: E www.mccsemi.com 2 of 4 2012/09/07 MCC SMAJ5.0 thru SMAJ440CA Micro Commercial Components ELECTRICAL CHARACTERISTICS @25qC MCC PART NUMBER UNI-POLAR SMAJ5.0A SMAJ6.0A SMAJ6.5A SMAJ7.0A SMAJ7.5A SMAJ8.0A SMAJ8.5A SMAJ9.0A SMAJ10A SMAJ11A SMAJ12A SMAJ13A SMAJ14A SMAJ15A SMAJ16A SMAJ17A SMAJ18A SMAJ20A SMAJ22A SMAJ24A SMAJ26A SMAJ28A SMAJ30A SMAJ33A SMAJ36A SMAJ40A SMAJ43A SMAJ45A SMAJ48A SMAJ51A SMAJ54A SMAJ58A SMAJ60A SMAJ64A SMAJ70A SMAJ75A SMAJ78A SMAJ85A SMAJ90A SMAJ100A SMAJ110A SMAJ120A SMAJ130A SMAJ150A SMAJ160A SMAJ170A SMAJ180A SMAJ200A SMAJ220A SMAJ250A SMAJ300A SMAJ350A SMAJ400A SMAJ440A BI-POLAR SMAJ5.0CA SMAJ6.0CA SMAJ6.5CA SMAJ7.0CA SMAJ7.5CA SMAJ8.0CA SMAJ8.5CA SMAJ9.0CA SMAJ10CA SMAJ11CA SMAJ12CA SMAJ13CA SMAJ14CA SMAJ15CA SMAJ16CA SMAJ17CA SMAJ18CA SMAJ20CA SMAJ22CA SMAJ24CA SMAJ26CA SMAJ28CA SMAJ30CA SMAJ33CA SMAJ36CA SMAJ40CA SMAJ43CA SMAJ45CA SMAJ48CA SMAJ51CA SMAJ54CA SMAJ58CA SMAJ60CA SMAJ64CA SMAJ70CA SMAJ75CA SMAJ78CA SMAJ85CA SMAJ90CA SMAJ100CA SMAJ110CA SMAJ120CA SMAJ130CA SMAJ150CA SMAJ160CA SMAJ170CA SMAJ180CA SMAJ200CA SMAJ220CA SMAJ250CA SMAJ300CA SMAJ350CA SMAJ400CA SMAJ440CA REVERSE STAND-OFF VOLTAGE VWM (VOLTS) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 180 200 220 250 300 350 400 440 BREAKDOWN VOLTAGE V(BR) @ IT (VOLTS) MIN 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 201 224 246 279 335 391 447 492 MAX 7.00 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 111 123 135 147 159 185 197 209 222 247 272 309 371 432 494 543 I T (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MAXIMUM CLAMPING VOLTAGE @ IPP (VOLTS) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 292 324 356 405 486 567 648 713 PEAK PULSE CURRENT IPP (AMPS) 43.5 38.8 35.7 33.3 31.0 29.4 27.7 26.0 23.5 22.0 20.1 18.6 17.2 16.4 15.3 14.5 13.7 12.3 11.2 10.3 9.5 8.8 8.3 7.5 6.9 6.2 5.7 5.5 5.2 4.9 4.6 4.3 4.1 3.9 3.5 3.3 2.2 2.9 2.7 2.5 2.3 2.1 1.9 1.6 1.5 1.5 1.4 1.2 1.1 1.0 0.8 0.7 0.6 0.6 MAXIMUM REVERSE LEAKAGE @VWM ID (PA) 800 800 500 200 100 50 20 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MARKING CODE 1 AE AG AK AM AP AR AT AV AX AZ BE BG BK BM BP BR BT BV BX BZ CE CG CK CM CP CR CT CV CX CZ RE RG RK RM RP RR RT RV RX RZ SE SG SK SM SP SR ST SV SX SZ TE TG TK TM 2 WE WG WK WM WP WR WT WV WX WZ XE XG XK XM XP XR XT XV XX XZ YE YG YK YM YP YR YT YV YX YZ ZE ZG ZK ZM ZP ZR ZT ZV ZX ZZ VE VG VK VM VP VR VT VV VX VZ UE UG UK UM For bi-directional type having Vrwm of 10 Volts and less, the IR limit is double. For parts without A, the VBR is +10%. Revision: E www.mccsemi.com 3 of 4 2012/09/07 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: E 4 of 4 2012/09/07