* * * * * * * Features Regulated Converter Wide input range 85-264VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -40C to +85C Class II installations (without FG) EMC compliant without external components No load power consumption 40mW typ. Description The RAC20-K series are highly efficient PCB-mount power conversion modules with ultra-low energy losses especially in light load conditions, making them a benchmark for always-on and standby mode operations, which are typically coming along with IoT and smart applications. The power supply units cover worldwide mains input range of 85VAC up to 264VAC and come with international safety certifications for industrial, AV and ITE as well as household standards. These AC/DC modules operate in a temperature range of -40C to +85C and offer fully protected single or dual outputs as well as EMC class B compliance without the need of any external components. AC/DC Converter RAC RAC20-K 20 Watt Single Output Selection Guide Part Number RAC20-05SK (3) RAC20-12SK (3) RAC20-15SK (3) RAC20-24SK (3) RAC20-48SK (3) RAC20-12DK RAC20-15DK Input Voltage Range [VAC] 85-264 85-264 85-264 85-264 85-264 85-264 85-264 Output Voltage [VDC] 5 12 15 24 48 12 15 Output Current [mA] 4000 1670 1333 840 420 833 670 Efficiency typ (1) [%] 84 86 86 85 85 84 84 Max. Capacitive Load (2) [F] 10000 8000 1500 1000 330 1200 1000 Notes: Note1: Efficiency is tested at 230VAC input and constant resistive load at +25C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load ERP compliant LOT6 Model Numbering RAC20- E224736 K/W Wired option nom. Output Power Single or Dual Output Voltage Notes: Note3: Add suffix W" for wired version (only single output) 12 - 48Vout versions available from Dec/2018 without suffix, standard pin version Ordering Examples: RAC20-05SK RAC20-05SK/W RAC20-12DK www.recom-power.com 5Watt 5Watt 5Watt 5Vout 5Vout 12Vout Single Output Single Output Dual Output standard pin version wired version standard pin version REV.: 2/2018 IEC/EN62368-1 certified UL62368-1 certified CAN/CSA-C22.2 No. 62368-1-14 certified IEC/ENC60335 pending IEC/EN61204-3 compliant EN55032/14 compliant EN55024 compliant CB Report PA-1 RAC20-K AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. nom. Vin= 230VAC 85VAC 120VDC 230VAC 264VAC 370VDC Internal Input Filter Pi type Input Voltage Range (4, 5) 115VAC 230VAC Input Current Inrush Current 450mA 400mA 115VAC 230VAC cold start at +25C No Load Power Consumption 20A 40A 230VAC ErP Lot 6 Standby Mode Conformity (Output Load Capability) Input Frequency Range Minimum Load (6) 40mW 0.3W 0.7W 1.6W 0.5W Input Power = 1.0W 2.0W AC Input 47Hz single dual (required for regulation on both outputs) 0% 5% 115VAC 230VAC 0.6 0.5 Power Factor 63Hz Start-up Time 150ms Rise Time 40ms 115VAC 230VAC Hold-up Time 15ms 90ms Internal Operating Frequency Output Ripple and Noise 100kHz 20MHz BW (7) Notes: Note4: Note5: Note6: Note7: 100mVp-p The products were submitted for safety files at AC-Input operation Refer to line derating graph on page 5 Operation below 5% load will not harm the converter, but specifications may not be met Measurements are made with a 1.0F MLCC across output (low ESR) Efficiency vs. Load RAC20-12SK(W) 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RAC20-05SK(W) 60 50 40 30 50 40 30 115VAC 230VAC 20 10 0 60 115VAC 230VAC 20 10 0 10 20 30 40 50 60 70 80 90 100 0 0 Output Load [%] 10 20 30 40 50 60 70 80 90 100 Output Load [%] continued on next page www.recom-power.com REV.: 2/2018 PA-2 RAC20-K AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) RAC20-24SK(W) 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RAC20-15DK 60 50 40 60 50 40 30 30 115VAC 230VAC 20 10 0 115VAC 230VAC 20 10 0 10 20 30 40 50 60 70 80 90 0 100 0 10 20 30 Output Load [%] 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy 2.0% typ. Line Regulation low line to high line 0.5% typ. Load Regulation 10% to 100% load 2.0% typ. Cross Regulation (6) dual output only 5% max. Transient Response 25% load step change recovery time 4.0% max. 500s typ. Deviation vs. Load RAC20-05SK(W) RAC20-12SK(W) 2 2 1.5 1.5 115VAC 230VAC 0.5 0 -0.5 0.5 0 -0.5 -1 -1 -1.5 -1.5 -2 0 10 20 30 40 50 60 70 80 90 115VAC 230VAC 1 Deviation [%] Deviation [%] 1 100 -2 0 Output Load [%] 10 20 30 40 50 60 70 80 90 100 Output Load [%] continued on next page www.recom-power.com REV.: 2/2018 PA-3 RAC20-K AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) RAC20-15DK RAC20-24SK(W) 2 2 1.5 1.5 115VAC 230VAC 0.5 0 -0.5 0.5 0 -0.5 -1 -1 -1.5 -1.5 -2 0 10 20 30 40 50 60 70 80 90 115VAC 230VAC 1 Deviation [%] Deviation [%] 1 -2 100 0 10 20 30 Output Load [%] 40 50 60 70 80 90 100 Output Load [%] PROTECTIONS Parameter Input Fuse Type Value internal (8) Short Circuit Protection (SCP) T3.15A, slow blow type below 100mW hiccup, auto recovery Over Voltage Protection (OVP) 150% - 195%, latch off mode Over Current Protection (OCP) 110% - 130%, hiccup mode Over Voltage Category OVCII Class of Equipment Class II Isolation Voltage (9) Isolation Resistance tested for 1 minute I/P to O/P Viso = 500VDC Isolation Capacitance 3kVAC 1G min. 100pF max. Insulation Grade reinforced Leakage Current 0.25mA max. Notes: Note8: Refer to local safety regulations if input over-current protection is also required Note9: For repeat Hi-Pot testing, reduce the time and/or the test voltage ENVIRONMENTAL Parameter Operating Temperature Range Condition Value @ natural convection 0.1m/s full load -40C to +55C refer to derating graph -40C to +85C Maximum Case Temperature +95C Temperature Coefficient 0.05%/K Operating Altitude Operating Humidity 3000m non-condensing 20% - 90% RH max. IP Rating IP20 Pollution Degree PD2 Vibration Design Lifetime MTBF according to MIL-STD-202G 10-500Hz, 2G 10min./1cycle, period 60min. along x,y,z axes +25C 130 x 10 hours +55C 16 x 10 hours according to MIL-HDBK-217F, G.B. +25C +55C >450 x 103 hours >56 x 103 hours continued on next page www.recom-power.com REV.: 2/2018 PA-4 RAC20-K AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) Derating Graph Line Derating 100 100 90 90 80 80 70 70 Output Load [%] Output Load [%] (@ Chamber and natural convection 0.1m/s) 60 50 40 60 50 40 30 30 20 20 10 10 0 -40 -20 0 20 40 60 55 Ambient Temperature [C] 80 85 0 85 100 90 264 Input Voltage [VAC] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Audio/Video, information and communication technology equipment Safety requirements E224736 Audio/Video, information and communication technology equipment Safety requirements (CB Scheme) E491408-A6002-CB-1 Household and similar electrical appliances - Safety - Part 1: General requirements pending RoHS 2 Standard UL62368-1, 2nd Edition, 2014 CAN/CSA C22.2 Nr. 62368-1-14, 2nd Ed. 2014 IEC62368-1:2014 2nd Edition EN62368-1:2014 + A11:2017 IEC60335-1:2010 + AMD2:2016 + COR1:2016 EN60335-1:2012 + A11:2014 + A13:2017 RoHS-2011/65/EU EMC Compliance Condition Low voltage power supplies, d.c. output Part 3: Electromagnetic compatibility (EMC) Standard / Criterion IEC/EN61204-3:2000, Class B Electromagnetic compatibility of multimedia equipment - Emission requirements without external filter EN55032:2015, Class B Electromagnetic compatibility of household appliances, electric tools and similar apparatus - Emission Requirements EN55014-1:2006+A2:2011 Information technology equipment - Immunity characters - Limits and methods of measurement EN55024:2010 + A1:2015 Electromagnetic compatibility of household appliances, electric tools and similar apparatus - Immunity Requirements EN55014-2:2015 ESD Electrostatic discharge immunity test Air: 2, 4, 8kV, Contact: 2, 4kV Radiated, radio-frequency, electromagnetic field immunity test 10V/m, 3V/m, 1V/m AC Power Port: 2.0kV DC Output Port: 2.0kV Fast Transient and Burst Immunity AC Power Port: L-N 1.0kV DC Output Port: 0.5kV Surge Immunity EN61000-4-2:2009, Criteria B EN61000-4-3:2006 + A1:2008, Criteria A EN61000-4-4:2012, Criteria B EN61000-4-5:2014+A1:2017, Criteria B AC Power Port: 10V DC Output Port: 10V EN61000-4-6:2014, Criteria A Power Magnetic Field Immunity 50Hz, 30A/m EN61000-4-8:2010, Criteria A Voltage Dips and Interruptions Voltage Dips 20% Voltage Dips 30% Voltage Dips 60% Voltage Dips 100% Voltage Interruptions > 95% Immunity to conducted disturbances, induced by radio-frequency fields EN61000-4-11:2004+A1:2017, Criteria C EN61000-4-11:2004+A1:2017, Criteria C EN61000-4-11:2004+A1:2017, Criteria C EN61000-4-11:2004+A1:2017, Criteria B EN61000-4-11:2004+A1:2017, Criteria C continued on next page www.recom-power.com REV.: 2/2018 PA-5 RAC20-K AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS EMC Compliance Condition Standard / Criterion Limits of Voltage Fluctuations & Flicker EN61000-3-3:2013 Limitations on the amount of electromagnetic intererence allowed from digital and electronic devices FCC 47 CFR Part 15 Subpart B, Class B American National Standard for Methods of Measurement of Radio-Noise Emissions from LowVoltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz ANSI C63.4-2014, Class B DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value case potting PCB baseplate Material black plastic, (UL94V-0) silicone, (UL94V-0) FR4, (UL94V-0) black plastic, (UL94V-0) Dimension (LxWxH) 52.5 x 27.4 x 23.0mm pin wired Weight 60g typ. 65g typ. Dimension Drawing (mm) 52.5 Pinning information Pin # 1 2 3 4 5 27.4 embossed logo 26.3 51.0 23.0 2 Dual VAC in (N) VAC in (L) -Vout Com +Vout Tolerance: xx.x= 0.5mm xx.xx= 0.25mm 7.08 1.0 O1.0 0.1 Single VAC in (N) VAC in (L) no pin -Vout +Vout 20.32 Recommended Footprint Details 3 5 3.50 Top View 2 5 1 3.39 4 2.54 Bottom View 10.16 10.16 1 18x2.54= 45.72 4 3 2.54 continued on next page www.recom-power.com REV.: 2/2018 PA-6 RAC20-K AC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) Dimension Drawing Single Wired (mm) 12-48Vout available from Dec/2018 Wired information 52.5 27.4 embossed logo # 1 2 4 5 Function VAC in (N) VAC in (L) -Vout +Vout Wire color blue brown black red Type UL-1015 UL-1015 UL-1015 UL-1015 AWG 18 18 18 18 Tolerance: xx.x= 0.5mm xx.xx= 0.25mm 51.0 5 2 100.010 23.0 26.3 O2.9 2 Bottom View 1 4 5 PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Packaging Quantity Type pin wired tube tray Storage Temperature Range Storage Humidity Value tube tray 490.0 x 56.0 x 40.0mm 488.0 x 202.0 x 47.0mm 15pcs 20pcs -40C to +85C non-condensing 20% to 90% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM's explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 2/2018 PA-7