CLD DS10 Rev 7A Product family data sheet Cree XLamp XR-C LEDs (R) (R) Product Description The XLamp Flux Characteristics - White. ........... 2 to 10,000 K CCT), royal blue, Flux Characteristics - Color............ 2 blue, green, amber, red- Characteristics - White, Royal Blue, orange & red Blue, Green. . . . . . . . . . . . . . . . . . ............ 4 Maximum drive current: up Characteristics - Amber, Red-Orange, to 700 mA Red.. . . . . . . . . . . . . . . . . . . . . . . . . . ............ 4 Low thermal resistance: as Relative Spectral Power Distribution.. 5 low as 12 C/W Relative Flux vs. Junction Max junction temperature: Temperature. . . . . . . . . . . . . . . . . . ........... 6 150C Electrical Characteristics .. . . ........... 7 Industry-leading JEDEC Thermal Design. . . . . . . . . . . . . ............ 8 wide range of lighting applications, standard pre-qualification Relative Flux vs. Current. . . ............ 9 including color-changing, portable testing Typical Spatial Distribution. . ......... 10 Reflow solderable - JEDEC Reflow Soldering Characteristics. . ... 11 J-STD-020C compatible Notes.. . . . . . . . . . . . . . . . . . . . . . . . .......... 12 Electrically neutral thermal Mechanical Dimensions. . . . . . ......... 13 path Tape and Reel. . . . . . . . . . . . . . . .......... 14 * RoHS-compliant Dry Packaging and Packaging........ 15 * Lumen maintenance of and designers performance LED the to gives * TABLE OF CONTENTS Available in white (2,600 K lighting XR-C FEATURES flexibility create the next generation of LED lighting products. XLamp XR-C LEDs feature * electrically neutral thermal path, low thermal resistance and support * for a wide range of drive currents. * Cree XLamp LEDs bring high performance and quality of light to a and personal, directional, and outdoor, indoor- transportation, studio, commercial * * stage and * emergency-vehicle lighting. greater than 70% after www. cree.com/Xlamp 50,000 hours Copyright (c) 2007-2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp xr-c leds Flux Characteristics (TJ = 25 C) - White The following tables describe the available colors and flux for XR-C LEDs by listing the correlated color temperature range for the entire family and by providing several base order codes. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XR-E & XR-C Binning and Labeling document. Base Order Codes Min Luminous Flux (lm) CCT Range Color Min. Cool White 5,000 K Neutral White 3,700 K Warm White 2,600 K Max. Order Code Group Flux (lm) N3 56.8 XRCWHT-L1-0000-00501 N4 62.0 XRCWHT-L1-0000-00601 P2 67.2 XRCWHT-L1-0000-00701 P3 73.9 XRCWHT-L1-0000-00801 P4 80.6 XRCWHT-L1-0000-00901 Q2 87.4 XRCWHT-L1-0000-00A01 N3 56.8 XRCWHT-L1-0000-005E4 N4 62.0 XRCWHT-L1-0000-006E4 P2 67.2 XRCWHT-L1-0000-007E4 P3 73.9 XRCWHT-L1-0000-008E4 P4 80.6 XRCWHT-L1-0000-009E4 M3 45.7 XRCWHT-L1-0000-003E7 N2 51.7 XRCWHT-L1-0000-004E7 N3 56.8 XRCWHT-L1-0000-005E7 N4 62.0 XRCWHT-L1-0000-006E7 P2 67.2 XRCWHT-L1-0000-007E7 10,000 K 5,000 K 3,700 K Notes: * Cree maintains a tolerance of +/- 7% on flux and power measurements. * Typical CRI for Cool White & Neutral White (3,700 K - 10,000 K CCT) is 75. * Typical CRI for Warm White (2,600 K - 3,700 K CCT) is 80. Flux Characteristics (TJ = 25 C) - Color Dominant Wavelength Range Min. Color Royal Blue Max. Group DWL (nm) Group DWL (nm) D3 450 D5 465 Base Order Codes Min. Radiant Flux (mW) Order Code Group Flux (mW) 12 250 XRCROY-L1-0000-00701 13 300 XRCROY-L1-0000-00801 Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 2 XLamp xr-c leds Flux Characteristics (TJ = 25 C) - Color (continued) Dominant Wavelength Range Min. Color Blue Max. Group DWL (nm) Group DWL (nm) B3 465 B4 475 Dominant Wavelength Range Min. Color Green Max. Group DWL (nm) Group DWL (nm) G2 520 G4 535 Dominant Wavelength Range Min. Color Group Amber Max. DWL (nm) A2 585 Group DWL (nm) A3 595 Dominant Wavelength Range Min. Color RedOrange Max. Group DWL (nm) Group DWL (nm) O3 610 O4 620 Dominant Wavelength Range Min. Color Group Red R2 Max. DWL (nm) 620 Group R3 DWL (nm) 630 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) G 13.9 XRCBLU-L1-0000-00G01 H 18.1 XRCBLU-L1-0000-00H01 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) M 39.8 XRCGRN-L1-0000-00M01 N 51.7 XRCGRN-L1-0000-00N01 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) J 23.5 XRCAMB-L1-0000-00J01 K2 30.6 XRCAMB-L1-0000-00K01 M2 39.8 XRCAMB-L1-0000-00M01 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) K2 30.6 XRCRDO-L1-0000-00K01 M2 39.8 XRCRDO-L1-0000-00M01 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) J 23.5 XRCRED-L1-0000-00J01 K2 30.6 XRCRED-L1-0000-00K01 M2 39.8 XRCRED-L1-0000-00M01 Note: Cree maintains a tolerance of +/- 7% on flux and power measurements. Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 3 XLamp xr-c leds Characteristics - White, Royal Blue, Blue, Green Characteristics Unit Thermal Resistance, junction to solder point C/W 12 Viewing Angle (FWHM) - white degrees 90 Viewing angle (FWHM) - royal blue, blue, green degrees 100 mV/C -4.0 Temperature coefficient of voltage Minimum ESD Classification (HBM per Mil-Std-883D) DC Forward Current Typical Maximum Class 2 mA 500 Reverse Voltage V 5 Forward Voltage (@ 350 mA) - white, royal blue, blue V 3.5 4.0 Forward Voltage (@ 350 mA) - green V 3.7 4.0 Forward Voltage (@ 500 mA) - white, royal blue, blue V 3.6 LED Junction Temperature* C 150 * Note: For lumen maintenance data, see the Cree XLamp LED Reliability document. Characteristics - Amber, Red-Orange, Red Characteristics Unit Thermal Resistance, junction to solder point Minimum Typical C/W 15 degrees 90 Temperature coefficient of voltage - red-orange, red mV/C -2.3 Temperature coefficient of voltage - amber mV/C -1.8 Viewing Angle (FWHM) ESD Classification (HBM per Mil-Std-883D) Maximum Class 2 DC Forward Current - red-orange, red mA 700 DC Forward Current - amber mA 350 Reverse Voltage V 5 Forward Voltage (@ 350 mA) V 2.2 Forward Voltage (@ 700 mA) - red-orange, red V 2.4 LED Junction Temperature* C 2.5 150 * Note: For lumen maintenance data, see the Cree XLamp LED Reliability document. Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 4 XLamp xr-c leds Relative Spectral Power Distribution White Relative Spectral Power Distribution relative radiant Power (%) 100 80 60 5000K - 10000K CCT 3700K - 5000K CCT 2600K - 3700K CCT 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) White Color relative radiant Power (%) 100 80 Royal Blue 60 Blue Green Amber 40 Red-Orange Red 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) Color Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 5 XLamp xr-c leds Relative Flux vs. Junction Temperature (If = 350 mA) Relative Flux vs. Junction Temperature (IF = 350 mA) 100% relative luminous flux 90% 80% 70% 60% White 50% Blue 40% Green 30% 20% 10% 0% 25 50 75 100 125 150 Junction temperature (c) 100% relative luminous flux 90% 80% 70% 60% 50% Amber 40% Red-Orange 30% Red 20% 10% 0% 25 50 75 100 125 150 Junction temperature (c) 100% relative radiant flux 90% 80% 70% 60% 50% Royal 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction temperature (c) Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 6 XLamp xr-c leds Electrical Characteristics (Tj = 25C) White, Royal Blue, Blue & Green Electrical Characteristics (TJ = 25 C) forward Current (ma) 500 400 300 Green White, Royal Blue & Blue 200 100 0 0.0 1.0 Amber 2.0 3.0 4.0 5.0 forward voltage (v) forward Current (ma) 400 300 200 Amber 100 0 0.0 Red-Orange, Red 1.0 2.0 3.0 4.0 5.0 forward voltage (v) 700 forward Current (ma) 600 500 400 Red-Orange & Red 300 200 100 0 0.0 1.0 2.0 3.0 4.0 5.0 forward voltage (v) Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 7 XLamp xr-c leds Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. Given an existing thermal resistance of 12 C/W or 15 C/W between the junction and the solder point, it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to Thermal Design optimize lamp life and optical White,characteristics. Royal Blue, Blue & Green 600 White Royal Blue Blue Green maximum current (ma) 500 400 300 Rj-a = 15C/W Rj-a = 25C/W Rj-a = 35C/W 200 100 0 0 25 Amber 50 75 100 125 150 125 150 125 150 ambient temperature (c) Amber maximum current (ma) 400 300 200 Rj-a = 20C/W Rj-a = 30C/W Rj-a = 40C/W 100 0 0 25 Red-Orange, Red 50 75 100 ambient temperature (c) 800 Red-Orange Red maximum current (ma) 700 600 500 400 Rj-a = 20C/W Rj-a = 30C/W Rj-a = 40C/W 300 200 100 0 0 25 50 75 100 ambient temperature (c) Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 8 XLamp xr-c leds Relative Flux vs Current (Tj = 25C) Relative flux vs. current (T = 25 C) relative luminous flux (%) 140 120 100 White, Blue & Royal 80 Green 60 40 20 0 0 100 200 300 400 500 forward Current (ma) relative luminous flux (%) 120 100 80 60 Amber 40 20 0 0 100 200 300 400 forward Current (ma) relative luminous flux (%) 250 200 150 Red-Orange 100 Red 50 0 0 100 200 300 400 500 600 700 forward Current (ma) Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 9 XLamp xr-c leds Typical Spatial Distribution Typical Spatial Distribution relative luminous intensity (%) 120 100 80 White Royal Blue, Blue & Green 60 Amber, Red-Orange & Red 40 20 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 angle () Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 10 XLamp xr-c leds Reflow Soldering Characteristics In testing, Cree has found XLamp XR-C LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3 C/second max. 3 C/second max. Preheat: Temperature Min (Tsmin) 100 C 150 C Preheat: Temperature Max (Tsmax) 150 C 200 C 60-120 seconds 60-180 seconds 183 C 217 C 60-150 seconds 60-150 seconds 215 C 260 C 10-30 seconds 20-40 seconds 6 C/second max. 6 C/second max. 6 minutes max. 8 minutes max. Average Ramp-Up Rate (Tsmax to Tp) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5 C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25 C to Peak Temperature Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 11 XLamp xr-c leds notes Lumen Maintenance Projections Based on internal long-term reliability testing and standardized forecasting methods, Cree projects XLamp LEDs to maintain an average of 70% lumen maintenance after 50,000 hours, provided the LED junction temperature is maintained at or below 80 C. Please read the XLamp Reliability application note for more details on Cree's lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity XLamp LEDs are shipped in sealed, moisture-barrier bags (MBB) designed for long shelf life. If XLamp LEDs are exposed to moist environments after opening the MBB packaging but before soldering, damage to the LED may occur during the soldering operation. The following derating table defines the maximum exposure time (in days) for an XLamp LED in the listed humidity and temperature conditions. LEDs with exposure time longer than the time specified below must be baked according to the baking conditions listed below. Temp. Maximum Percent Relative Humidity 30% 40% 50% 60% 70% 80% 90% 30 C 9 5 4 3 1 1 1 25 C 12 7 5 4 2 1 1 20 C 17 9 7 6 2 2 1 Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LEDS to the resealable moisture-barrier bag and closing the bag immediately after use. Baking Conditions LEDs should be baked at 80 C for 24 hours. LEDs may be baked on the original reels. Remove LEDs from MBB packaging before baking. Do not bake parts at temperatures higher than 80 C. This baking operation resets the exposure time as defined in the Moisture Sensitivity section above. Storage Conditions XLamp LEDs that have been removed from original MBB packaging but not soldered yet should be stored in a room or cabinet that will maintain an atmosphere of 25 5 C and no greater than 10% RH (relative humidity). For LEDs stored in these conditions, storage time does not add to exposure time as defined in the Moisture Sensitivity section above. RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim WARNING: Do not look at exposed lamp in operation. Eye injury can result. See LED Eye Safety at www.cree.com/ products/pdf/XLamp_EyeSafety.pdf. Intellectual Property For remote phosphor applications, a separate license to certain Cree patents is required. It is not necessary to bake all XLamp LEDs. Only the LEDs that meet all of the following criteria must be baked: * LEDs that have been removed from the original MBB packaging. * LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above. * LEDs that have not been soldered. Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 12 XLamp xr-c leds Mechanical Dimensions (TA = 25 C) All measurements are .1mm unless otherwise indicated. Lens Substrate Reflector Reflector Lens Substrate 6.8 mm 4.4 .2 mm Side View 9.0 mm 8.4 mm 5.6 mm 6.46 mm 0.7 mm 7.0 mm Bottom View Top View 8.4 mm 7.0 mm 5.6 mm 0.70 mm 6.46 mm Recommended PC Board Solder Pad Recommended PC Board Solder Pad Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 13 XLamp xr-c leds Tape and reel All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm. + 330.2 mm Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 14 XLamp xr-c leds Dry Packaging and Packaging Humidity Indicator Humidity Card (insideIndicator bag) Card (inside bag) Label with Cree BinBin Label with Cree Code, Qty, LotLot ## Code, Qty, Dessicant Dessicant (inside bag) (inside bag) Vacuum-Sealed Vacuum-Sealed Moisture MoistureBarrier BarrierBag Bag Label with Cree Cree Bin Bin Label with Code, Qty, Lot Lot # # Code, Qty, Label with Customer Order with Customer Label with Label Customer Order Order Code, Code, Qty,Qty, Reel ID, PO # # Code, Qty, ReelReel ID, ID, POP.O. # Label with Cree Bin Patent Label Code, Qty, Lot # Patent Label Patent Label Copyright (c) 2007-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 15