ElectrosolveTM Contact Cleaner 409B Technical Data Sheet 409B-Aerosol Description The 409B ElectrosolveTM Contact Cleaner is a very fast drying and zero residue contact cleaner. It is effective at dissolving oils and non-polar residues, and for assisting with the removal of oxidation using a brush. It cleans connectors, contacts, circuit breakers, microprocessors, and LED and PCB components. Features and Benefits * Suitable for Use in Food Facilities as a Non-Food Chemical--Canadian and NFS recognition letters available on request * Safe on many plastics * Zero residue * Fast evaporation rate * Dissolves oils and residues * A variable valve on the aerosol lets you adjust the flow rate as needed * RoHS compliant ATTENTION ! Do NOT use on live circuits. For use on equipment that will not tolerate aqueous cleaning solutions. Not for use in direct contact with food. Usage Parameters Properties Shelf Life Temperature Ranges Value 5y Properties Storage Temperature Limits a) Value -20 to 40 C [-4 to 104 F] a) Storage below zero is not necessary. Cool, dry, and well ventilated area recommended. Properties Physical Properties High Purity Color Odor Density @25C [77 F] Viscosity @25C [77 F] Flash Point Boiling Point Vapor Pressure @25C [77 F] Relative Evaporation Rate Volatile Organic Content (VOC) Method -- Brookfield SP1 Closed Cup Page 1 of 4 Date: 06 March 2017 / Ver. 1.01 Value No residue Clear Mild hydrocarbon 0.66 g/mL 0.3 cP [0.0003 Pa*s] -29 C [-20 F] 52 C [126 F] 33 kPa [250 mmHg] 0.8 (Ether = 1); 9.4 (ButAc=1) 100% ElectrosolveTM Contact Cleaner 409B Technical Data Sheet 409B-Aerosol Solvation Parameters Solubility in Water KB (Kauri Butanol) Value Hansen Solubility Parameters Total Non-Polar Polar Hydrogen Bonding Value Insoluble 30 a) (MPa)1/2 14.9 14.9 0.0 0.0 [cal/cm3]1/2 7.28 7.28 0.0 0.0 a) Hansen parameters calculate using component literature values and volume fraction composition. Compatibility Substrate Compatibility: Consult 409B partial compatibility chart table for substrate compatibility. It is always recommended to perform a compatibility test on a non-critical test area prior to large scale applications. Perform this test even if the chart predicts high compatibility since modern plastic parts may incorporated hidden incompatible materials in the form of plastic blends or as protective and decorative coatings. Compatibility Chart Plastic type Epoxy ABS (acrylonitrile butadiene styrene PMMA (Acrylic) PVC (Polyvinyl chloride) HD-PE (high density polyethylene) LD-PE (low density polyethylene) PP (polypropylene) PS (polystyrene) PC (Polycarbonate) Resistance Very Good Poor Good Good Good Partial Good Partial Poor ATTENTION ! Use with care on thin plastics or near parts that are chemically sensitive. Solvent Miscibility: The 409B is generally miscible organic solvent, but it is immiscible with water. Page 2 of 4 Date: 06 March 2017 / Ver. 1.01 ElectrosolveTM Contact Cleaner 409B Technical Data Sheet 409B-Aerosol Health, Safety, and Environmental Awareness Please see the 409B Safety Data Sheet (SDS) for more details on transportation, storage, handling and other security guidelines. Health and Safety: This liquid is highly flammable and should be kept away from flames and other ignition sources. Avoid breathing in fumes or direct contact with the material. HMIS(R) RATING NFPA(R) 704 CODES * HEALTH: 2 FLAMMABILITY: 3 PHYSICAL HAZARD: 0 3 2 0 PERSONAL PROTECTION: Approximate HMIS and NFPA Risk Ratings Legend: 0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe) Environmental Impact: It is RoHS compliant. Application Instructions To clean residues in aerosol format 1. Spray dirty area. 2. Ensure that wash runs off the circuit board along the shortest unencumbered path to prevent redeposit of solvated residues Packaging and Supporting Products Cat. No. 409B-140G 409B-340G Packaging Aerosol Aerosol Net Volume 188 mL 6.35 fl oz 457 mL 15.4 fl oz a) Case pack of ten Supporting Products * * Hog Hair Cleaning Brush: Cat. No. 852 Large Hog Hair Cleaning Brush: Cat. No. 853 Page 3 of 4 Date: 06 March 2017 / Ver. 1.01 Net Weight 140 g 4.93 oz 340 g 11.9 oz Packaging Weight 2.2 kg a) 4.9 lb a) a) 4.6 kg 10 lb a) ElectrosolveTM Contact Cleaner 409B Technical Data Sheet 409B-Aerosol Technical Support Contact us regarding any questions, improvement suggestions, or problems with this product. Application notes, instructions, and FAQs are located at www.mgchemicals.com. Email: support@mgchemicals.com Phone: +(1) 800-340-0772 (Canada, Mexico & USA) +(1) 905-331-1396 (International) Fax: +(1) 905-331-2862 or +(1) 800-340-0773 Mailing address: Manufacturing & Support 1210 Corporate Drive Burlington, Ontario, Canada L7L 5R6 Head Office 9347-193rd Street Surrey, British Columbia, Canada V4N 4E7 Warranty M.G. Chemicals Ltd. warranties this product for 12 months from the date of purchase by the end user. M.G. Chemicals Ltd. makes no claims as to shelf life of this product for the warranty. The liability of M.G. Chemicals Ltd. whether based on its warranty, contracts, or otherwise shall in no case include incidental or consequential damage. Disclaimer This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. M.G. Chemicals Ltd. does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. Page 4 of 4 Date: 06 March 2017 / Ver. 1.01