43
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/GT Series
AIB/GT Series is basically a MIL-DTL-5015 (MIL-C-5015) connector, but
with an improved coupling system. AIB/GT Series replaces the threaded
coupling used in MIL-DTL-5015 with a positive, quick-mating, 3-point
reverse bayonet lock. AIB/GT Series shares the same shell dimensions,
contact layouts, contacts, and performance characteristics as the
MIL-DTL-5015 threaded connectors; however, the two series do not
intermate. Over 180 contact layouts are available from 1 to 85 circuits
and up to 150 amps per contact. The standard MIL-DTL-5015 layouts
allow the mixing of power and signal contacts, power only, or signal
only. Contacts are available in solder, crimp, or PC termination covering
wire gauges from size 26 to size 0 AWG. Thermocouple (J, Y, K, T) and
coax contacts are also available. These connectors are completely
sealed to withstand moisture, condensation, vibration, and flash-over
across a broad range of wire diameters. When the two connector halves
are mated, the rear sealing grommet plus the dynamic interfacial seal at
the front create an environmentally sealed assembly.
Commercial
and Military
AIB/GT Series connectors are made in accordance with German military specification
VG 95 234 and MIL-DTL-5015. Originally designed for NATO combat vehicles, aircraft, and
airborne equipment, these rugged connectors are now widely used in a broad range of
demanding commercial applications from trucks to industrial robots.
• Power Generators
• Battery Systems
• Engines
• Sensors
• Motion Control
• Off-road Vehicles
• Earth Moving Equipment
• Ships
• Railroad Equipment
Applications
• Mobile Equipment
• Industrial Machinery
• Telecommunications
• Mass Transit
Industrial environments requiring extreme environmental reliability and ease of
mating and unmating, such as:
AIB/GT Series
Features Simple and Fast Mating and Un-mating
AIB/GT Series connectors use a unique, “reverse bayonet” coupling system for ease of use.
This system allows mating and un-mating of the connector halves with a simple 120˚
rotation – without compromising shock, vibration, or moisture resistance. The large, open
ramps are easily cleaned of mud or other contaminants. The ramp coupling system
eliminates the possibility of cross threading and thread damage possible with standard
MIL-DTL-5015 threaded connectors. This quick-mating design is easier to mate in cold
weather, tight spaces, or on equipment which must be disassembled frequently.
Shock and Vibration Resistant
AIB/GT Series connectors are supplied with standard military resistant sealing and 3-point
bayonet coupling nut. The 3-point bayonet coupling incorporates a wave spring and
washer which is specified by the Rail Industry. AIB/GT Series connectors pass the most
stringent tests of shock and vibration performance while maintaining proper continuity and
water tightness. Rugged aluminum alloy shell and hardware are light in weight yet highly
resistant to damage.
Proven Reliability
AIB/GT Series connectors are used extensively in military vehicles such as the M1 Tank.
They also have found applications on advanced locomotives, transit cars, and way
maintenance equipment.
Amphenol®
44
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
Features Audible, Visual, and Tactile Confirmation of Mating
AIB/GT Series connectors provide the user with three independent checks that the connector
halves are mated. When the coupling nut is fully rotated, the three studs snap into the end
of the ramps with a loud “click” (audible confirmation). At that same moment, the user can
actually feel the bolts click into the grooves (tactile confirmation). Blue dots on the receptacle
and on the coupling nut are aligned when the connector is properly mated (visual
confirmation).
Environmental
The sealing of this connector is not compromised by any of the operating conditions
defined in MIL-DTL-5015. The connector is completely watertight when mated.
Broad Temperature Range
These connectors will operate in temperatures from -67˚ to +257˚F (-55˚ to +125˚C). High
temperature and zero halogen insulators are also available. Call for ordering information.
Wide Range of Wire Gauges and Current Carrying Capability
Up to 150 amps with accommodations for wire gauges from size 26 up to size 0 AWG wire.
Wide Variety of Contacts
High reliability screw machine contacts with silver or gold plating are available in sizes from
20 through 0 to accommodate wire gauges from 26 to 0 AWG. Solder, Crimp, PC, Coax,
and Thermocouple contacts are available.
AIB/GT Series connectors use rail industry standard crimp contacts which are completely
interchangeable with other rail connectors such as Litton/Veam CIR series.
Intermateable and Intermountable with all VG 95 234 Connectors
The standard MIL-DTL-5015 layouts and dimensions ensure intermateability and
intermountability with all connectors made in accordance with VG 95 234.
All AIB/GT Series connectors are intermountable with standard threaded MIL-DTL-5015
connectors, making it possible to upgrade without the need to change panel cutouts or
clearances in most cases.
Technical
Specifications MATERIALS & FINISHES
Shell Aluminum alloy. (Shells can be grounded)
Plating Olive drab chromate coating over cadmium plating,
black zinc cobalt, electroless nickel, green zinc, and
black anodized
Contacts Copper alloy
Platings Hard silver plating or gold plating
Insulator* Neoprene
Seals Silicone, Neoprene, or Viton**
*Optional zero halogen and high temperature insulators are available. Call for information.
**Viton is a registered trademark of DuPont DOW Elastomers
Amphenol®
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
45
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Technical
Specifications
CONTACT SIZE TEST CURRENT (AMPS)
16/16S 13
12 23
8 46 (69)*
4 80 (80)*
0 150 (225)*
ELECTRICAL DATA
Operating Voltage/Test Voltage The indicated values for the “operating voltage”
According to MIL-DTL-5015 are limits concerning the electrical function. In any case,
when the working voltage exceeds 50V, safety
precautions must be in accordance with the following
standards: VDE 0100, IEC 309-1 or applicable
national standards
Current Rating
Altitude Voltage Derating* Chart
per MIL-DTL-5015
p3.5.4
CONTACT CONTACT RESISTANCE POTENTIAL VOLTAGE
SIZE MILLIOHM MAX. DROP IN MILLIVOLTS MAX.
16/16S 6 21
12 3 20
8 1/(0.44)* 12 (20)*
4 0.5/(0.23)* 10 (18)*
0 0.2/(0.18)* 10 (27)*
Insulation Resistance
@77˚F (25˚C) > 5,000 Megohms
†Not corrected for changes in density due to variations in temperature
* No attempt has been made to recommend operating voltages. The designer must
determine his own operating voltage by the application of a safety factor to the above derating
chart to compensate for circuit transients, surges, etc.
Amphenol®
Wire Range Sizes 26 AWG to 0 AWG (See contact selection on pages 70-73
Contact Resistance
MS
SERVICE
RATING AIRSPACE CREEPAGE
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
MINIMUM
FLASHOVER
VOLTAGE
AC (RMS)
TEST
VOLTAGE
AC (RMS)
I 1/32 1/16 250 1,000 1,400 1,000 550 400 325 260
A 1/16 1/8 700 500 2,800 2,000 800 600 450 360
D 1/8 3/16 1,250 900 3,600 2,800 900 675 500 400
E 3/16 1/4 1,750 1,250 4,500 3,500 1,000 750 550 440
B 1/4 5/16 2,450 1,750 5,700 4,500 1,100 825 600 480
C 5/16 1 4,200 3,000 8,500 7,000 1,300 975 700 560
NOMINAL
DISTANCE INCHES
STANDARD
SEA LEVEL
CONDITIONS
PRESSURE
ALTITUDE†
50,000 FEET
PRESSURE
ALTITUDE†
70,000 FEET
DC V
AC
(RMS)
OPERATING
VOLTAGE
MECHANICAL
Operating Temperature -67˚ to +257˚F (-55˚ to +125˚C) Neoprene
Sealing 33 feet submersible when mated. ≈IP 67 and NEMA 4P
*Using Radsok contact
*Test amps, multiconductor using Radsok contact
➥
46
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
Technical
Specifications
SEALING RANGE
16 .090 - .118 2.3 - 3.0
12 .126 - .177 3.2 - 4.5
8 .150 - .256 3.8 - 6.5
4 .279 - .366 7.1 - 9.3
0 .394 - .539 10.0 - 13.7
CONTACT
SIZE
Wire Sealing Range The connector is designed for individual wire sealing.
Sealing of an outer cable jacket on multiconductor
cables must be accomplished with an appropriate
endbell. Sealing is only guaranteed if wires according
to MIL-W-5086 or within the listed ranges are used.
INCHES (mm)
Amphenol®
Insulation Strip Lengths See Contact Selection Chart on page 70
Mating Life 2,000 cycles minimum (commercial) 500 cycles
minimum (military)
Salt Spray Olive drab chromate over cadmium - 500 hours
Non-conductive black zinc - 200 hours
Conductive black zinc - 48 hours
Black anodized - 500+ hours
Electroless nickel - 48 hours
Heat Neoprene 257˚F (+125˚C); Low Smoke Zero Halogen (LSZH)
347˚F (+175˚C); Viton 392˚F (+200˚C)
Chemical Resistance Diesel Fuel 48-hour intermittent spray for each
JP-4 chemical with no deterioration,
Hydraulic Fluid followed by Contact Retention (CR),
Gasoline Insulation Resistance (IR), Dielectric
Withstanding Voltage tests (DWV)
Corrosion Resistance Olive Drab Cadmium Plated
48 Hrs per MIL-DTL-5015 (3.17/4.6.13)
Fluid Immersion Hydraulic Fluid 20 hours per MIL-DTL-5015 (3.19/4.6.15)
Lubrication Oil 20 hours per MIL-DTL-5015 (3.19/4.6.15)
Vibration per MIL-STD-810C, method 516.2, procedure VIII
1.0 g peak from 5 to 25 Hz
.030” double amplitude from 25 to 57 Hz
5g peak from 57 to 500 Hz
Basic Shock Per MIL-STD-810C, method 516.2, procedure I
pulse at half sine wave of 30g for 11 seconds
Gun fire Shock Per MIL-STD-810C, method 516.2, procedure IV
pulse at half sine wave of 100g for 1.5 seconds
Ballistic Shock Per MIL-STD-810C, method 516.2, procedure IV
pulse at half sine wave of 200g for .5 seconds
Contact Type Solder, Crimp, PC, Coax, or Thermocouple. Hard silver
or gold plating.
Contact Insertion From rear with simple hand tool. Removable,
5 cycles minimum.
Contact Retention Pin and socket contacts
are designed to resist severe
vibration and repeated
connection & disconnection.
Contact retention and
separation is tested according
to MIL-DTL-5015 (3.10/4.6.6.3)
CONTACT RETENTION
SIZE FORCE MIN.
16 10
12 15
820
420
0 25
➥
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
THERMOCOUPLE CODES
MATERIAL COLOR CODE CODE
Iron Black IR
Constantan Yellow CON
Copper Alloy – Cu
Chromel White CH
Alumel Green AL
10SL 26
14S 44
16 50
16S 50
18 55
20 65
22 85
24 90
28 114
32 120
36 153
40 170
47
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
SIZE IN./LB. MAX.
AIB/GT Series
How to Order
The next page contains a pictograph which portrays all of the standard possibilities
for AIB/GT Series connectors. Follow the nine steps to create a description of the
connector best suited to your application. This is not an Amphenol part number, but
does give you a convenient way to select your connector. Call us with the description
for a valid Amphenol part number. If you prefer to select the Amphenol part number,
see the How-To-Order Guide on pages 94-95.
Many options not shown are available. Call us if your needs are not met by the
options on the next page.
pin contact
insulator for
pin contacts
bayonet
ramp
receptacle
shell
bayonet pin
bayonet
coupling nut
ferrule (sleeve)
endbell
insulator
for socket
contact stainless
steel stud
(optional) plug shell
AIB/GT Series
Cross-Section
Technical
Specifications
sealing
ring wave spring
individual
wire sealing
grommet
socket
contact
Amphenol®
Number of Circuits 1 to 85
Polarization Key and keyway plus three point bayonet with
optional rotational polarization. See pages 59-69.
Rear Accessories
Maximum Torque
endbell
o-ring
skid washer
Color code is identified by small dot on
wire well end of contact.
Approvals/Agency Listing UL File# E115497
➥
➥
Thermocouple
Types: J = Iron-Constantan
K = Alumel-Chromel
T = Copper-Constantan
E = Chromel-Constantan
48
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
Front Box Mount
No Accessory
Threads
Plugs Receptacles
▼
➤
6
4
20
70
2
30
0
TB
1
Follow these 9 steps to create your part number. . .
STEP 1 STEP 2
Select Shell Style, Plug or Receptacle
Select
Connector
Type
▼
▼
▼
AIB
➤
➤
mates with
➤
mates with
➤
Shell
Style
Cable
Clamp/
Heat
Shrink
Boot
Endbells
Connector
Type
Standard
(Most Popular)
Rubber Covered
mates with
6HD
Heavy Duty
Cable Mount
with Accessory
Threads
Rear Wall Mount
with Accessory
Threads
(Most Popular)
Front Wall Mount
with Accessory
Threads
Front Box Mount
with Rear
Accessory Threads
Rear Mount
Jam Nut
with Accessory
Threads
Thru
Bulkhead
* See pages 94-95 for Amphenol order codes.
Create your part number using these nine steps
(example)
Layout
123 45 6789
Contact Rotation
6B
Box Mount
7
Rear Mount
Jam Nut
No Accessory
Threads
if omitting
endbell,
enter - (dash)
AIBC
* AIBC is the commercial
version of the AIB. It comes
without wear pins in the
receptacles and without wave
springs in the coupling nuts.
** Note: AIBC are fully
intermateable with all reverse
bayonet connectors.
➤
➤
Plating/
Modification
Contact
Type
AIB – 472
S
W
P
24-28
AF
6HD
mates with➤
➤
➥
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
(if needed)
49
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
STEP 4
▼
➤
G
Choose Cable Clamps
and/or Heat Shrink Boot
Choose Endbells
STEP 3 Choose layout
STEP 5
S= Solder
C= Crimp*
H= PC**
0= Less contacts
L
T
F
(if applicable)
No Clamp
Long Extender
Internal thread version
External thread version
➤
See pages 50-69.
➤
Conduit Metal
➤
➤
MS-3057-C
C
*Viton is a registered trademark of DuPont Dow Elastomers
Shielded Cable/Heat Shrink
STEP 9
Choose Platings/Modifications
▼
P= Pin
S= Socket
PS = Style TB only
STEP 6
Choose Contact
STEP 7
Choose Rotation
▼
See pages 59-69.
(omit for normal)
STEP 8
Choose Contact Type
* When using a “C” in part number, the
connector is supplied with the standard size
crimp contacts for its layout. Bolded part
number on pages 70-73 indicate crimp
contacts. If reduced or enlarged crimp contacts
are required, specify contact type 0 (less
contacts) and order contacts separately.
** See page 75 for post diameters
and lengths.
▼
P
Low Cost Gland Seal
Gland Seal
Potting * Potting Compound
see page 261
90º
Standard Extender
▼
W
X
Y
Z
CONTACTS
– B30 = Gold 30μ" Gold over Nickel
–T = Thermocouple
– RDS = RADSOK (Socket only) 8,4,0
Omit for silver contacts
SHELLS
– 023 = Nickel (RoHS with crimp only)
– 024 =
Green Zinc Cobalt
– 025 =
Black Zinc Cobalt
(RoHS with crimp only)
– 027 = Conductive Black
Zinc Cobalt (RoHS with crimp only)
– G96= Black Anodized
Omit for olive drab chromate over cadmium
– 116 = Less Pre-tinned Solder Cups
– 472 = 116 & 025 mod codes (RoHS)
– 548 = 116 & 023 mod codes (RoHS)
MATERIALS
L=
Low Smoke Zero Halogen
V=
High Temperature Viton®*
Shielded Cable Banding
MS-3057-A
9767
Call with cable
outside diameter.
A
RV
Heat Shrink
Standard Specials
Call with NPT thread size, Sealtite conduit diameter, or cable outside diameter.
Conduit Plastic
Mesh Grip
▼
▼▼
9767
➥
➥
➥
➥
➥
➥
See pages 262-263. ➥
Heat Shrink Boot
Call with cable outside diameter.
See pages 258-260.
50
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
LAYOUT 20-23 22-1 22-8 22-11 24-9 28-7 32-5
# OF CONTACTS 2-#8 2-#8 2-#12 2-#16 2-#4 2-#4 2-#0
SERIES
● ✚ ✦ ▼ ● ✦ ▼ ● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✜ ▼ ● ✚ ✦
SERVICE RATING A D E B A D D
1 CONTACT
LAYOUT 8S-1 10S-2 12S-4 12-5 14S-4 14-3 16S-3 16-2
# OF CONTACTS 1-#16 1-#16 1-#16 1-#12 1-#16 1#8 1#16 1-#12
SERIES
✚ ✦ ✚ ✚ ✚ ✦ ● ✜ ✦ ✚ ● ✚ ● ✚ ▼
SERVICE RATING A A D D D A B E
LAYOUT 10SL-4* 12S-3* 14S-9* 16S-4 16-11 16-13 18-3 18-14 20-12
# OF CONTACTS 2-#16 2-#16 2-#16 2-#16 2-#12 2*-#12 2-#12 1-#16; 1-#4 1-#16; 1-#4
SERIES
● ✚ ✦✚ ✦● ✚ ✦● ✚ ✦● ✚ ✦ ▼✖ ▼● ✚ ✦ ▼ ● ✜ ▼ ● ✜
SERVICE RATING A A A D A A D A A
3 CONTACTS
Layouts by Number of Contacts
2 CONTACTS
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
LAYOUT 16-12 18-6 18-7 18-16 18-420 20-2 22-7 24-52
# OF CONTACTS 1-#4 1-#4 1-#8 1-#12 1-#12 1-#0 1-#0 1-#12
SERIES
● ✚ ✦ ▼ ● ✚ ▼ ● ✜ ▼ ● ✜ ✦ ▼ ✦ ● ✚ ● ✚ ▼ ● ✜
SERVICE RATING A D B C 17 KVac D E 21 KVac
24 KVdc 30 KVdc
A B
BA
AB
AB
A
B
AB
AB
A
B
A
B
A
B
AB
AB
AB
AB
AB
A
B
LAYOUT 10SL-3 14S-1 14S-7 14S-12 16S-5 16S-6 16-7 16-10 18-5
# OF CONTACTS 3-#16 3-#16 3-#16 3-#16 3-#16 3-#16 2-#16; 1-#8 3-#12 1-#16; 2-#12
SERIES
● ✚ ✦ ✚ ✦ ● ✚ ✦ ● ✚ ✦ ● ✚ ✦ ● ✜ ✦ ● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✚ ✦ ▼
SERVICE RATING A A A A A A A A D
LAYOUT 18-22 20-3 20-6 20-19 20-51 20-59 22-2 22-6
# OF CONTACTS 3-#16 3-#12 3-#16 3-#8 3*-#8 3*-8 for #10 or 12 wire 3-#8 1-#16; 2-#8
SERIES
● ✜ ✦ ▼ ● ✜ ✦ ▼ ● ✜ ✦ ▼ ● ✚ ✦ ▼ ● ✜ ● ✜ ● ✚ ✦ ▼ ● ✚ ▼
SERVICE RATING D D D A A A D D
AB
C
A
BC
A
BC
A
BC
A
B
C
A
B
C
A
B
C
A
BC
A
B
C
A
B
C
A
BC
A
B
C
AB
C
B
CA
A
BC
100∞
A
B
C
A
B
C
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
LAYOUT 40-57 40-66 40-86 14S-5* 16S-8* 18-11* 18-20
# OF CONTACTS 4-#0 4-#0 (coax) 4-#0 (coax) 5-#16 5-#16 5-#12 5-#16
RG-63B/U RG-115A/U
SERIES
● ✜ ● ✜ ● ✜ ● ✚ ✦ ● ✚ ✦ ● ✚ ✦ ▼● ✚ ✦ ▼
SERVICE RATING E (coax) (coax) I A A A
LAYOUT 22-9 22-21 22-80 28-3 28-6 28-72 36-4
# OF CONTACTS 3-#12 2-#16;1-#0 3*-#8 for #10 or 12 wire 3-#8 3*-#4 3-#4 (coax) RG-59A/U or RG-62A/U 3-#0
SERIES
● ✚ ✦ ▼ ● ✜ ▼ ● ✜ ● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✜ ● ✜
SERVICE RATING E A A E D (coax) D(A); A(B,C)
51
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
4 CONTACTS
Layouts by Number of Contacts
3 CONTACTS (CONT.)
A
BC
A
B
C
A
BC
A
BC
A
BC
A
BC
A
BC
LAYOUT 12SL-844 14S-2* 14S-10 16-9 16-59 18-4* 18-10* 18-13 18-15
# OF CONTACTS 4-#16 4-#16 4-#16 2-#16; 2-#12 4-#12 4-#16 4-#12 3-#12; 1-#8 4**-#12
SERIES
✦● ✚ ✦
● ✚ ✦ ● ✚ ✦ ▼● ✜ ● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✚ ✧ ▼ ● ✚ ✦
SERVICE RATING I I I A A D A A A
A
BC
D
100∞
A
BC
D
AB
CD
A
BC
D
A
BC
D
A
B
C
D
A
B
C
D
A
B
C
D
LAYOUT 20-4* 20-20 20-24 22-4 22-10 22-22* 24-22* 32-17
# OF CONTACTS 4-#12 3-#12; 1-#4 2-#16; 2-#8 2-#12; 2-#8 4-#16 4-#8 4-#8 4-#4
SERIES
● ✚ ✦ ▼● ✜ ▼ ● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✚ ✦ ▼● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✚ ✦
SERVICE RATING D A A A E A D D
A
B
D
C
A
B
C
D
A
B
C
D
A
BC
D
A
BC
D
A
BC
D
A
BC
D
A
BC
D
A
B
C
D
LAYOUT 32-58 36-5 36-51 36-64 36-65
# OF CONTACTS 4-#4 (coax) 4-#0 2-#4; 2-#0 4-#0 (coax) RG-11/U; 4-#0 (coax) RG-59/U;
RG-161/U or RG-179/U RG-12/U or RG-13/U RG-62/U or RG-71/U
SERIES
● ✜ ● ✚ ✦ ● ✜ ● ✜ ● ✜
SERVICE RATING COAX A D (coax) (coax)
A
B
CD
A
B
C
D
A
B
C
D
1
2
3
4
1
2
3
4
1
2
3
4
LAYOUT 18-29 18-30 18-31 20-14 22-12 22-13 22-34 24-12
# OF CONTACTS 5-#16 5-#16 5-#16 3-#12; 2-#8 3-#16; 2-#8 1-#16; 4-#12 2-#16; 3-#12 3-#12; 2-#4
SERIES
● ✜ ✦ ▼ ● ✚ ✦ ● ✚ ✦ ● ✚ ✦ ▼ ● ✜ ✦ ▼ ● ✜ ✦ ▼ ● ✚ ✦ ▼ ● ✚ ✦ ▼
SERVICE RATING A A A A D D(E) A(A,B,C,D) D A
A
B
C
D
E
110∞
AB
C
D
E
A
B
C
D
E
A
B
CD
E
A
B
C
D
E
A
BC
DE
A
B
C
D
E
260∞
AB
C
D
E
5 CONTACTS
A
B
C
D
E
A
B
C
D
E
A
BC
D
E
AB
C
D
E
A
B
C
D
A
B
C
D
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
52
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Layouts by Number of Contacts
5 CONTACTS (CONT.)
LAYOUT 24-17 24-51 24-53 24-79 28-5 32-1 32-2 32-79
# OF CONTACTS 3-#16; 2-#12 5-#8 5-#8 5-#8 2-#16; 1-#12; 2-#4 3-#12; 2-#0 2-#16; 3-#4 1-#8; 4-#4
SERIES
● ✜ ▼ ● ✜ ● ✜ ● ✜ ● ✜ ▼ ● ✚ ● ✚ ● ✜
SERVICE RATING D B; E for AWG #10 or 12 wire A A D E(A); D(B, C, D, E) E D
A; C; D for AN #18 wire
AB
C
D
E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
B
CD
E
A
B
CD
E
A
B
C
D
E
5 CONTACTS 6 CONTACTS
LAYOUT 40-5 40-75 14S-6* 18-12 20-8 20-17 20-22 20-66
# OF CONTACTS 5-#0 4-#0; 1-#12 6-#16 6-#16 4-#16; 2-#8 1-#16; 5-#12 3-#16; 3-#8 1-#16
5-#12 for #10 wire
SERIES
● ✜ ● ✜ ● ✚ ✦● ✚ ▼● ✚ ✦ ▼ ● ✜ ✦ ▼ ● ✚ ✦ ▼ ● ✜
SERVICE RATING A E I A I A A A
A
BC
D
E
A
B
GC
N
FA
B
C
D
E
A
B
C
D
E
F
A
B
C
D
EF
A
B
C
D
E
F
A
BC
D
E
F
1
2
3
4
5
LAYOUT 22-5 22-15 22-24 28-22 28-82 36-3 36-6
# OF CONTACTS 4-#16; 2-#12 1-#16; 5-#12 4-#16; 2-#12 3-#16; 3-#4 4-#12; 2-#8 3-#12; 3-#0 4-#0; 2-#0
SERIES
● ✚ ✦ ▼ ● ✚ ✦ ◆● ✜ ▼ ● ✜ ▼ ● ✜ ● ✜ ● ✚ ✦
SERVICE RATING D A(A, B, C, E, F); D(C, D, E) D D D A
E(D) A(A, B, F)
A
BC
D
E
F
A
B
CD
E
F
12
3
45
6
A
B
C
D
E
F
A
B
C
D
E
F
1
2
34
5
6
A
B
E
F
C
D
A
B
C
D
E
F
7 CONTACTS
LAYOUT 40-74 14SA7 16S-1* 18-9 18-17 20-15* 20-57
# OF CONTACTS 4-#0 (coax) RG-9B/U or RG-214/U 7-#16 7-#16 5-#16; 2-#12 5-#16; 2-#12 7-#12 12 for #14 or 16 wire
1-#4 (coax) RG-62/U; 1-#12
SERIES
● ✜ ● ✜ ● ✚ ✦● ✚ ✦ ▼● ✚ ✦ ▼ ● ✚ ✦ ▼● ✜
SERVICE RATING A A A I I A A
A
F
ED
C
B
G
A
B
CD
E
F
G
A
B
C
D
E
F
G
A
B
CD
EG
F
A
B
CD
EG
F
A
B
C
E
F
G
D
A
BC E
FG
D
A
B
CD
E
F
G
100∞
A
B
C
D
E
F
G
LAYOUT 22-28 22-33 24-2 24-3 24-10 24-16 24-27
# OF CONTACTS 7-#12 7-#16 7-#12 5-#16; 2-#12 7-#8 3-#16; 3-#12; 1-#8 7-#16
SERIES
● ✚ ✦ ▼ ● ✜ ● ✚ ✦ ▼ ● ✜ ▼ ● ✚ ✦ ▼ ● ✜ ✦ ▼ ● ✚ ▼ ✦
SERVICE RATING A D(A, B, C, D) D D A D(A, B, F, G) E
A(E, F, G) A(C, D, E)
A
B
C
E
F
G
D
A
B
C
DE
F
A
B
C
D
E
FG
A
B
C
D
E
F
G
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
A
B
C
D
E
F
G
8 CONTACTS
LAYOUT 22-18 22-23 22-65 24-6 32-15 32-52 32-57
# OF CONTACTS 8-#16 8-#12 12 for #14 or 16 wire 8-#12 6-#12; 2-#0 2-#0; 6-#12 2-#0 (coax) RG-7/U; 6-#12
SERIES
● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✜ ● ✜ ✦ ▼ ● ✜ ● ✜ ● ✜
SERVICE RATING D(A, B, F, G, H); D(H); D(H); A(balance) D(A, G, H); D D (coax)
A(C, D, E) A(balance) A(balance)
ABC
DEF
G
H
I
53
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Layouts by Number of Contacts
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
C
D
E
F
G
A
B
C
D
E
F
G
7 CONTACTS (CONT.)
LAYOUT 24-60 24-66 24-71 24-75 28-10 32-10 36-73
# OF CONTACTS
7-#8 or 12 wire 7-#12 5-#8 for #10 or 12 wire, 2-#8 for #16 wire; 3-#12; 2-#8; 3-#16; 2-#8; 2-#4 7-#4 (coax)
2-#8 5-#8 2-#4 RG-62B/U
SERIES
● ✜ ● ✜ ● ✜ ● ✜ ● ✚ ✦ ● ✜ ● ✜
SERVICE RATING I D A A D(G); A(balance) E(A, F); B(G); (coax)
D(B, E); A(C, D)
A
B
C
D
E
F
G
A
B
C
D
E
F
G
1
2
34
5
6
7
A
B
C
DE
F
G
H
A
B
C
DE
F
GH
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
LAYOUT 36-77 36-83 40-87 18-8* 20-7* 20-9 20-79
# OF CONTACTS 7-#4 7-#4 (coax) RG-58/U 7-#4 7-#16; 1-#12 8-#16 7-#16; 1-#12 7-#16; 1-#12
SERIES
● ✜ ● ✜ ● ✜ ● ✚ ✦ ▼ ● ✚ ✦ ▼
● ✜ ● ✜
SERVICE RATING D (coax) D A D(A, B, H, G); H = (D); H = D;
A(C, D, E, F) A(balance) A(balance)
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
A
BC
DE
F
G
H
90∞A
BC
DE
F
G
H
A
BC
DE
F
G
H
A
B
C
D
E
F
G
H
LAYOUT 24-11 28-1 28-4 28-84 28AY 32-3 32-75
# OF CONTACTS 6-#12; 3-#8 6-#12; 3-#8 7-#16; 2-#12 9-#8 5-#16; 4-#4 4-#16; 2-#12; 2-#4; 1-#0 7-#8 (coax); RG-180B/U
2-#12
SERIES
● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✜ ▼ ● ✜ ● ✜ ● ✚ ● ✜
SERVICE RATING A D(A, J, E); E(G, P, S); A A D D(8,9) (coax)
A(balance) D(balance)
AB
C
D
E
F
G
H
J
AB
CD
P
S
EFG
A
B
C
DE
F
G
H
I
A
BC
DE F
GH
J
A
B
C
DEF
G
H
J
1
2
3
4
5
67
89
A
B
CD
E
F
G
LAYOUT 20-16 20-18* 20-21 22-16 22-17 22-20 22-27
# OF CONTACTS 7-#16; 2-#12 6-#16; 3-#12 8-#16; 1-#12 6-#16; 3-#12 8-#16; 1-#12 9-#16 8-#16; 1-#8
SERIES
● ✚ ✦ ▼● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✚ ✦ ▼ ● ✜ ▼ ● ✜ ✦ ▼ ● ✚ ✦ ▼
SERVICE RATING A A A A D(A); A(balance) A D(J); A(balance)
A
B
C
D
EFG
H
I
A
B
C
D
E
F
G
H
I
A
B
C
D
E
FGH
J
A
B
C
D
E
F
G
H
J
A
B
C
D
E
F
G
H
J
A
B
CDE
F
GH
J
A
B
C
D
E
F
GH
I
9 CONTACTS
7 CONTACTS (CONT.)
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
54
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Layouts by Number of Contacts
LAYOUT 20-33 24-20 36-14 40-67 40-72 40-80
# OF CONTACTS 11-#16 9-#16; 2-#12 6-#16; 5-#12; 5-#8 10-#4 (coax); 1-#16 RG-59/U 10-#4 (coax); 1-#16 RG-9B/U 10-#4; 1-#16
SERIES
● ✜ ✦ ▼ ● ✜ ✦ ▼● ✜● ✜● ✜● ✜
SERVICE RATING A D D A (coax) A (coax) A
A
B
C
D
E
F
K
H
JM
L
AB
C
D
EF
G
H
J
KL
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
AB
CDE
FH J
KL
M
AB
CDE
FH J
KL
M
AB
CDE
FH J
KL
M
11 CONTACTS
LAYOUT 22-63 24-19 28-8 28-9 28-18 28-51
# OF CONTACTS 8-#16; 4-#12 12-#16 10-#16; 2-#12 6-#16; 6-#12 12-#16 12-#12
SERIES
● ✜ ✦ ▼ ● ✜ ✦ ▼ ● ✜ ✦ ▼ ● ✚ ✦ ▼ ● ✜ ▼
SERVICE RATING A A E(L,M,); D(B) A(balance) D C(M); D(G, H, I, K, L) A
A(A, B); I(balance)
A
B
C
D
E
F
G
H
J
K
L
M
A
B
C
D
E
F
G
H
J
K
L
M
A
BC
E
F
H
J
K
L
M
N
D
A
B
C
D
E
F
H
J
K
L
M
N
12 CONTACTS
13 CONTACTS
LAYOUT 20-11 20-25 20-30 22-70 24-58 20-27* 22-19* 24-59
# OF CONTACTS 13-#16 13-#16 13-#16 5-#16; 8-#12 7-#16; 3-#12; 3-#8 14-#16 14-#16 7-#16; 7-#12
SERIES
● ✜ ✦ ▼ ● ✜ ✦ ● ✜ ✦ ● ✜ ● ✜ ● ✜ ✦ ▼● ✜ ✦ ▼● ✚
SERVICE RATING I I I A A A A A
A
BC
D
E
F
GH
J
K
L
M
N
100∞
A
BC
D
E
F
GH
J
K
L
M
N
A
B
C
DE
F
H
J
K
L
M
N
P
A
B
C
D
E
F
HJ
K
L
M
N
P
A
B
C
D
E
F
G
H
J
KL
M
N
P
A
B
C
D
EF
G
H
I
J
K
L
M
N
250∞
A
BC
D
E
F
GH
J
K
L
M
N
A
B
C
D
E
F
H
J
K
LM
N
P
R
14 CONTACTS
14 CONTACTS
LAYOUT 28-2 28-20 32-4 32-9 36-78 24-65 28-17* 32-12
# OF CONTACTS 12-#16; 2-#12 4-#16; 10-#12 12-#16; 2-#12 12-#16; 2-#4 12-#8; 2-#16 4-#16; 11-#12 15-#16 10-#16; 5-#12
SERIES
● ✜ ✦ ▼ ● ✜ ✦ ▼● ✜ ● ✜ ● ✜ ● ✜ ● ✜ ✦ ▼ ● ✜
SERVICE RATING D A A(F, J, K, N); D A A B(R); D(M, N, P); A(C, D, E, F, G);
D(balance) A(A-L) D(balance)
A
B
C
D
EF
G
H
J
K
L
M
N
P
A
B
C
D
E
F
G
H
J
K
L
M
N
P
AB
CD E F G
HI J K
LMN
1
2
3
4
56
7
8
9
10
11
12
13
14
AB
CD EFG
HJK
LM
OP
N
A
B
CD
E
F
G
HJK
L
M
N
P
R
A
B
C
D
E
F
G
H
J
K
L
M
N
O
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
15 CONTACTS
10 CONTACTS
LAYOUT 18-1* 18-19 18-24 20-58 24-21 28-19
# OF CONTACTS 10-#16 10-#16 10-#16 5-#16; 5-#12 9-#16; 1-#8 6-#16; 4-#12
SERIES
● ✚ ✦ ▼● ✚ ✦ ▼ ● ✚ ✦ ● ✜ ● ✚ ✦ ▼ ● ✚ ✦ ▼
SERVICE RATING A (B, C, F, G) A A(B, C, F, G); A D B(H, M); D(A, B)
I(balance) I(balance) A(balance)
A
B
C
D
E
F
G
H
I
J
A
BC
DEF G
H
K
J
250∞
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
F
G
H
JK
AB
C
E
G
H
J
K
L
M
A
BC
DE
F
H
J
K
L
A
B
C
D
E
F
J
L
M
N
H
K
A
B
C
DE
F
G
H
J
K
LM
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
55
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
LAYOUT 24-5 24-7* 28-66 28-74 28-75 28-79 32-68
# OF CONTACTS 16-#16 14-#16; 2-#12 14-#12; 2-#8 3-#8 for #10 wire; 7-#8 for #10 wire 7-#8; 9-#16 4-#4 (coax) RG-58C/U
4-#8; 9-#16 9-#16 12-#16
SERIES
● ✜ ✦ ▼● ✜ ✦ ▼● ✜ ● ✜ ● ✜ ● ✜ ● ✜
SERVICE RATING A A A A A A A (coax)
AB
C
DE
FGH
JK
LMN
P
S
R
AB
C
D
E
F
G
H
J
K
L
M
N
P
IO
AB
C
D
E
F
H
J
K
L
M
N
PR
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
AB
CDE
FG H
J
KLM
NP
QR
16 CONTACTS
LAYOUT 32-82 36-14 20-29* 28-59 36-13
# OF CONTACTS 12-#16; 4-#4 6-#16; 5-#12; 5-#8 17-#16 10-#16; 7-#12 15-#16; 2-#12
SERIES
● ✜ ● ✜ ● ✜ ✦ ▼● ✜ ● ✜
SERVICE RATING A D A A E(N, P, Q)
A(balance)
AB
CDE
FG H
J
KLM
NP
QR
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
AB
C
D
E
F
G
H
J
K
L
MN
PT
SR
A
B
C
D
EF
G
H
J
K
LM
NP
Q
RS
AB CD
EFH
JK
LMN
PR S TU
16 CONTACTS
Layouts by Number of Contacts
17 CONTACTS
LAYOUT 22-14* 24-67 24-84 32-76
# OF CONTACTS 19-#16 19-#12 18-#12; 1-#12 19-#12
(coax) RG-188/U or RG-174/U
SERIES
● ✚ ✦ ▼● ✜ ● ✜ ● ✜
SERVICE RATING A I A (coax) A
A
B
C
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
90∞
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
12 3
4567
8 9 10 11 12
13 14 15 16
17 18 19
90∞
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
19 CONTACTS
LAYOUT 28-16 36-79 36-80 40-68 28-11* 36-1
# OF CONTACTS 20-#16 20-#12 20-#12 for #10 wire 21-#8 18-#16; 4-#12 18-#16, 4-#12
SERIES
● ✚ ✦ ▼● ✜ ● ✜ ● ✜ ● ✚ ✦ ▲● ✜ ✦
SERVICE RATING A A A A A D
AB
C
D
E
F
G
H
J
K
LM
P
Q
R
S
T
U
VN
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
J
K
L
M
I
N
P
R
S
T
U
V
W
X
ABC
DE F G H
IJK LMN
OP R S T
UVW
20 CONTACTS 22 CONTACTS
21 CONTACTS
LAYOUT 24-80 32-6 32-13 32-16 32-60 32-62
# OF CONTACTS 23-#16 16-#16; 2-#12; 18-#16; 5-#12 16-#16; 2-#12; 8-#8 (coax); 15-#16 2-#8 (coax); 16-#16; 2-#12;
3-#8; 2-#4 3-#8; 2-#4 RG-124/U 1-#8; 2-#4 RG-124/U
SERIES
● ✜ ● ✚ ✦ ● ✚ ✦ ● ✚ ● ✜ ● ✜
SERVICE RATING I A D A A (coax) A (coax)
ABCD
EFGHJ
KLMNPQ
RSTUV
WX Z
A
B
C
D
E
F
G
H
J
K
L
M
N
PR
S
T
U
V
W
X
Y
Z
100°
AB
CD
EF
GH
IJ
KLM N
O
PR
S
T
UV
WX
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
A
B
CD
E
F
H
J
K
LM
N
P
R
S
T
U
V
W
X
Y
Z
a
23 CONTACTS
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
56
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
LAYOUT 24-96 40-10 32-8 32-56 40-1
# OF CONTACTS 28-#16 16-#16; 9-#8; 4-#4 24-#16; 6-#12 6-#12 for #10 wire; 24-#16 24-#16; 6-#12
SERIES
● ✜ ● ✜ ● ✚ ✦● ✜ ● ✚
SERVICE RATING I A A A D
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
25
26
27
28
A
B
CD
E
H
K
G
J
F
L
Q
P
N
I
M
RS
O
V
Y
Z
W
U
X
b
a
c
T
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
28 CONTACTS 30 CONTACTS
29 CONTACTS
Layouts by Number of Contacts
31 CONTACTS 34 CONTACTS
LAYOUT 32-31 36-9 36-18 36-20
# OF CONTACTS 31-#16 14-#16; 14-#12; 2-#8; 1-#4 14-#16; 14-#12; 2-#8; 1-#4 30-#16; 2-#12; 2-#8
SERIES
● ✜ ● ✚ ✦ ● ✜ ✦ ● ✜
SERVICE RATING A A A A
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
100∞
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
ABC
DE FG
HI JKL
MNO PR S
TU V WX
YZ ab
cde
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27
28
29
30 31
AB
CD E FG
HJK LMN
PRSTUVW
XYZ abc
def g
hj
km
35 CONTACTS
LAYOUT 28-15* 32-7* 36-15 36-85
# OF CONTACTS 35-#16 28-#16; 7-#12 35-#16 35-#16 for #12 wire
SERIES
● ✚ ✦● ✚ ✦ ● ✚ ✦● ✜
SERVICE RATING A I(A, B, h, j); A(balance) D(M); A(balance) D(M); A(balance)
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
TU
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
j
k
m
e
AB
CDEFG
HJKLM
PRS T
N
W
XYZ
UV
abc
de
f
g
h
jk
m
l
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17 18
19
20
21
22
23
24
25
26
27
28
29
30
3132
33
34
35
LAYOUT 40-35 40-64 28-21* 40-AG
# OF CONTACTS 35-#12 13-#8 (coax) RG-124/U 37-#16 38-#12
20-#16; 3-#12
SERIES
● ✜ ● ✜ ● ✚ ✦● ✜
SERVICE RATING D I (coax) A A
36 CONTACTS 38 CONTACTS
37 CONTACTS
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
A
B
C
D
E
F
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
k
m
n
p
q
ABCD
EFGHJ
KLMNPR
STUV WXZ
abcdef
ghjkm
nprs
35 CONTACTS
24 CONTACTS 26 CONTACTS
25 CONTACTS
LAYOUT 24-28* 24-AJ 32-25 28-12* 28-13
# OF CONTACTS 24-#16 25-#16 25-#12 26-#16 26-#16
SERIES
● ✜ ✦ ▼● ✜ ● ✜ ● ✚ ✦ ▼● ✚ ✦
SERVICE RATING I A A A A
ABCD
EFGH J
KL
MNPQ
RSTUV
WXYZ
ABC
D
G
EFH
J
KLM NP
Q
T
RSUV
WZ
XY
a
13
12
11
10
9
876
5
4
3
2
1
23
19 22
21
20
15
18
17
16
14
24
25
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
100∞
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
57
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
39 CONTACTS
LAYOUT 36-54 36-55 32-53 36-74
# OF CONTACTS 31-#16; 8-#8 8-#8 for #6 wire; 31-#16 37-#16; 5-#12 8-#1 (coax); RG187/U
43-#16
SERIES
● ✜ ● ✜ ● ✜ ● ✜
SERVICE RATING A A E(T, U) I(balance) A (coax)
42 CONTACTS
ABCDE
F
H
J
K
LMNPR
S
T
U
V
W
X
YZabc
d
f
g
h
i
jk
m
n
p
r
tu
vw
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Zab
c
d
f
g
h
i
j
km
n
p
rt
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Zab
c
d
f
g
h
i
j
km
n
p
rt
s
q
44 CONTACTS
LAYOUT 32-73 36-7* 36-8 36-16
# OF CONTACTS 46-#16 40-#16; 7-#12 46-#16; 1-#12 40-#16; 7-#12
SERIES
● ✜ ● ✚ ✦● ✚ ✦● ✜ ✦
SERVICE RATING A A A A
46 CONTACTS 47 CONTACTS
A
BC
DE
F
GH
IJKL
M
NOPR
STU
V
WXYZa
bcde
fg hj
k
m
npr
t
u
vw
s
xy
z
100∞
AB
CDE
FG
HIJ
KLMN
OPRS
T
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
48 49
50 51 52
53 54
55 56 57
58 59 60 61
62 63 64 65 66
67 68 69 70
71 72 73 74 75
76 77 78 79
80 81 82 83
84 85
86 87
88 89
90
91
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZabc
defg
hjkm
np
r
t
s
uv
xy
z
w
12
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
Layouts by Number of Contacts
110∞
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
LAYOUT 36-17 36-60 36-76 40-9
# OF CONTACTS 40-#16; 7-#12 7-#12 for #10 wire; 40-#16 47-#16 24-#16; 22-#12; 1-#8
SERIES
● ✜ ✦ ● ✜ ● ✜ ● ✚
SERVICE RATING A A A A
12
3
45
67 8
910 1112
13 14 15 16 17
18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39
40 41 42
43 44
45
46 47
AB
CDE
F
GHIJ
KL
MN O PQ
RST
UVWXYZa
bcdefg h i
jk
lm
n
p
rtu
s
o
q
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZabc
defg
hjkm
np
r
t
s
uv
xy
z
w
48 CONTACTS
LAYOUT 36-10* 36-11 36-12 36-75 36-AF
# OF CONTACTS 48-#16 48-#16 48-#16 48-#16 for #14 wire 48-#16
SERIES
● ✚ ✦ ● ✚ ✦ ● ✚ ✦ ● ✜ ● ✜
SERVICE RATING A A A A A
12
34 5
67
89
10 11
1213
1415
16
17
18
19
202122
2324
25
2627
28
29
30
31 32
33 34
3536
37
38
394041
42 43
4445
4647
48
AB
C
D
E
F
G
H
J
K
L
M
N
O
PQ
R
S
T
U
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
m
n
p
r
t
s
q
u
v
w
x
y
z
110∞
AB
CD EFG
HJ KLMN
OPQR STU
VWX Y Z ab c
de fg hj k
mnp r
tu vw
s
x
yz
q
AB
CD E FG
HJK LMN
OPQR STU
VWX Y Z a b c
de fg hj k
mnpr
tuvw
s
x
yz
q
100∞
AB
CD EFG
HJK LMN
OPQ RSTU
VWX Y Z a b c
def g hj k
mnpr
tuv w
s
x
yz
q
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
58
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
54 CONTACTS
LAYOUT 32-22 32-64 32-AF 40-61
# OF CONTACTS 54-#16 54-#16 55-#16 55-#16; 3-#12; 1-8
SERIES
● ✜ ● ✜ ● ✜ ● ✜
SERVICE RATING A I A A
55 CONTACTS
12
345 67
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
50 51 52 53 54 55 56
57
58
59
AB
CDE
FGHJ
KLM
NO PR
STUVW
XYZa
bcdef
ghjk
mnpr
t
q
suv
xy
zAA
AB AC
AD AE
AF AG
w
AB
CDE
FGHJ
KLM
NO PR
STUVW
XY Za
bcdef
ghjk
n
mpr
tuv
w
sxy
z
q
AA
AB AC
AD AE
AF AG
AH
AB
CDE
FGHJ
KLM
NOPR
STUVW
XYZ
a
bcd e f
ghjk
mnpr
t u v
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
Layouts by Number of Contacts
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21 22
23
24
25
26 27
28
29
30
31
32
3335
36
37
38
39
40
41 42 43
44
45
46
47
34
48
49
50
51
52
53
54
55 56
57
58
59
60
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61 CONTACTS
LAYOUT 40-53 40-62 40-85 40-63 40-70
# OF CONTACTS 60-#16 60-#16 60-#16 for #14 wire 61-#16 for #14 wire 61-#16
SERIES
● ✜● ✜ ● ✜ ● ✜ ● ✜
SERVICE RATING A A A A A
1
2345
678910
11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
58 59 60 61
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55 56
57
58
59
60
61
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55 56
57
58
59
60
61
62 CONTACTS
LAYOUT 40-73 40-81 40-82 40-56
# OF CONTACTS 61-#16 62-#16 for #14 wire 62-#16 85-#16
SERIES
● ✜ ● ✜ ● ✜ ● ✚
SERVICE RATING A A A A
ABCD
EF H J K LM
NPRSTUVW
XYZab
cdfg
hijkmnp r
tuvw
s
xyz
q
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT
AU AV AW AX AY
AZ BA BB
BV
BC BD BE BF BH
BJ BK BL BM BN
BS BT BU
BP BR
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
59 CONTACTS
60 CONTACTS
85 CONTACTS
61 CONTACTS
52 CONTACTS
LAYOUT 32-414 36-52 36-403 36-59 36-71
# OF CONTACTS 52-#16 52-#16 52-#16 3-#12 for #10 wire; 50-#16 50-#16; 3-#12
SERIES
✦● ✜
✦● ✜● ✜
SERVICE RATING A A A A A
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mnp r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mnp r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
ABC
D
EFHJ
K
LM N P R S
TUV WXY Z
abcdfghi
jkmn p r
tuvw
sx
yz
q
AA AB AC
AD
AE AF
AH
53 CONTACTS
12
34A
567
8910
C
11 12 13 14
15 16 17 +
20
18 19
23
22
24
21
A
B
C
E
F
G
Z
Y
X
b
df
x
r
a
e
3
f
D
H
J
S
R
QPNMLK
TUV
W
c
lk
n
yw
mjhg
2z
tr
s
vup
654
CONTACT LEGEND =16 =12 =8 =4 =0
Mating face view of pin inserts
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97)
P-lok (▼) Thermocouple () *most popular
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
59
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
8S-1 ✦✚ 11 ---- A
10S-2 ✚11 ---- A
10SL-3 ✦✚● 33 ---- A
10SL-4 ✦✚● 22 ---- A
10SL-51 ✜● 22 10SL-4 45º A=Ir.; B=Con.
10SL-52 ✜● 22 10SL-4 45º A=Cu; B=Con.
10SL-53 ✜● 22 10SL-4 45º A=Al.; B=Ch.
10SL-54 ✜● 33 10SL-3 A=Ir.; B=Con.; C=Cu
10SL-55 ✜● 33 10SL-3 A=Al.; B=Ch.; C=Cu
10SL-56 ✜● 22 10SL-4 A=Al.; B=Ch.
10SL-57 ✜● 22 10SL-4 A=Ch.; B=Con.
10SL-58 ✜● 33 10SL-3 A=Ch.; B=Al.; C=Cu
10SL-59 ✜● 22 10SL-4 A=Ch.; B=Al.
10SL-60 ✜● 22 10SL-4 A=Ir.; B=Con.
10SL-61 ✜● 22 10SL-4 A=Cu; B=Con.
10SL-62 ✜● 33 10SL-3 A=Cu; B=Al.; C=Ir.
10SL-63 ✜● 33 10SL-3 A, C=Con.; B=Ch.
10SL-64 ✜● 33 10SL-3 A, C=Ch.; B=Al.
12S-1 ✦✜● 2 2 12S-3 100º A
12S-2 ✦✜● 2 2 12S-3 250º A
12S-3 ✦✚ 2 2 70 145 215 290 A
12S-4 ✚11 ---- D
12S-51 ✜● 22 12S-3 315º A=Ch.; B=Al.
12S-54 ✜● 22 12S-3 315º A = Ir.; B=Con.
12S-55 ✜● 22 12S-3 45º A=Cu; B=Con.
12S-56 ✜● 22 12S-3 A=Al.; B=Ch.
12S-57 ✜● 22 12S-3 60º A=Ch.; B=Al.
12S-58 ✜● 22 12S-3 120º A=Ir.; B=Con.
12S-59 ✜● 22 12S-3 A=Ir.; B=Con.
12S-60 ✜● 22 12S-3 A=Cu; B=Con.
12S-61 ✜● 22 12S-3 A=Ch.; B=Con.
12S-62 ✜● 22 12S-3 A=Ch.; B=Al.
12SL844 ✦44 ---- I
12-5 ✦✚ 11 ----D
14S-1 ✦✚ 33 ---- A
14S-2 ✦✚● 4 4 - 120 240 - I
14S-4 ✦✜● 11 --- D
14S-5 ✦✚● 5 5 - 110 - - I
14S-6 ✦✚● 66 90--- I
14S-7 ✦✚● 3 3 90 180 270 - A
Layouts by Shell Size
N
Z
Y
W
X
Mating Face view of pin inserts
Alternate Insert Position (Rotation)
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES SERVICE
RATING
N
Z
Y
W
X
Mating Face view of pin inserts
Alternate Insert Position (Rotation)
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
60
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Layouts by Shell Size
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
14S-9 ✦✚● 2 2 70 145 215 290 A
14S-10 ✦✜● 4 4 14S-2 100º I
14S-11 ✦✜● 4 4 14S-2 250° I
14S-12 ✦✜● 3 3 14S-1 100° X & Z are valid. Call for details. A
14S-13 ✦✜● 3 3 14S-1 260° A
14S-14 ✦✜● 4 4 14S-2 100° I
14S-51 ✜● 22 14S-9 90° A=Al.; B=Ch.
14S-52 ✜● 44 14S-2 45° A, B=Cu; C=Al.; D=Ch.
14S-53 ✜● 22 14S-9 90° A=Ir.; B=Con.
14S-54 ✜● 66 14S-6 45° A, C, E=Ir.; B, D, F=Con.
14S-55 ✜● 44 14S-2 45° A, C=Ir.; B, D=Con.
14S-56 ✜● 44 14S-2 45° A=Ir.; B=Con.; C, D=Cu
14S-57 ✜● 44 14S-2 45° A, C=Al.; B, D=Ch.
14S-58 ✜● 33 14S-7 45° A=Al.; B=Ch.; C=Cu
14S-59 ✜● 22 14S-9 90° A=Cu; B=Con.
14S-60 ✜● 22 14S-9 A=Al.; B=Ch.
14S-61 ✜● 66 14S-6 45° A=Al.; B=Ch.; C=Ir.; D=Con.; E, F=Cu
14S-63 ✜● 66 14S-6 A, C= Al.; B, D=Ch.; E=Ir.; F=Con.
14S-64 ✜● 44 14S-2 A, C=Con.; B, D=Cu
14S-65 ✜● 66 14S-6 A, C, E= Cu; B, D, F=Con.
14S-67 ✜● 66 14S-6 A=Al.; B=Ch.; Balance=Cu
14S-68 ✜● 44 14S-2 45° A=Ch.; B=Con.; C, D=Cu
14S-69 ✜● 33 14S-7 A=Con.; B=Ch.; C=Cu
14S-70 ✜● 44 14S-2 A, D=Ch.; B, C=Al.
14S-71 ✜● 44 14S-2 A, B, D=Cu; C=Con.
14S-72 ✜● 22 14S-9 A=Con.; B=Cu
14S-73 ✜● 44 14S-2 A, B=Cu; C=Al.; D=Ch.
14S-74 ✜● 44 14S-2 A, B=Ch.; C, D=Al.
14S-75 ✜● 44 14S-2 A, B=Cu; C, D=Con.
14S-76 ✜● 44 14S-2 A, C=Al.; B, D=Ch.
14S-77 ✜● 44 14S-2 A, D=Al.; B, C=Ch.
14S-78 ✜● 22 14S-9 A=Ch.; B=Al.
14SA7 ✜● 77 ---- A
14-3 ✚11 ----A
16S-1 ✦✚● 7 7 80 - - 280 A
16S-3 ✚11 ---- B
16S-4 ✦✚● 2 2 35 110 250 325 D
16S-5 ✦✚● 3 3 70 145 215 290 A
16S-6 ✦✜● 3 3 90 180 270 - A
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
61
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
16S-8 ✦✚● 5 5 - 170 265 - A
16S-14 ✦✜● 3 3 16S-4 110° A
16S-15 ✦✜● 2 2 16S-5 100° D
16S-16 ✦✜● 2 2 16S-4 250° D
16S-17 ✦✜● 3 3 16S-5 250° A
16S-52 ✜● 22 16S-4 A=Ch.; B= Al.
16S-54 ✜● 77 16S-1 A=Al.; B=C; Balance=Cu
16S-55 ✜● 77 16S-1 A=Con.; Balance=Cu
16SA18 ✦✜● 7 7 16S-1 100° A
16SA19 ✦✜● 7 7 16S-1 260° A
16SA20 ✦✜● 7 7 16S-1 110° A
16SA21 ✦✜● 7 7 16S-1 250° A
16-2 ✚● 11 ----E
16-7 ✦✚●▼ 3 2 1 80 110 250 280 A
16-9 ✦✚●▼ 4 2 2 35 110 250 325 A
16-10 ✦✚●▼ 3 3 90 180 270 - A
16-11 ✦✚●▼ 2 2 35 110 250 325 A
16-12 ✦✚● 11----A
16-13 ✦✚●▼ 22 35 110 250 325 A=Ir.; B=Con.
16-52 ✜● 22 16-11 90° A=Al.; B=Ch.
16-53 ✜● 422 16-9 70° A=Al.; C=Ch.; B, D=Cu
16-55 ✜● 13 16-10 45° A=Al.; B=Ch.; C=Cu
16-56 ✜● 22 16-13 90° A=Con.; B=Cu
16-57 ✜● 33 16-10 A=Al.; B=Cu; C=Ch.
16-58 ✜● 33 16-10 A=Con.; B, C=Cu
16-59 ✜● 44 ----A
16-60 ✜● 22 16-13 A=Al.; B=Ch.
16-62 ✜● 22 16-11 A=Con.; B=Cu
18A31 ✦✜● 10 10 18-1 110° A(B,C,F,G) I(all others)
18-1 ✦✚●▼10 10 70 145 215 290 A(B,C,F,G) I(all others)
18-3 ✦✚●▼ 2 2 35 110 250 325 D
18-4 ✦✚● 4 4 35 110 250 325 D
18-5 ✦✚●▼ 3 1 2 80 110 250 280 D
18-6 ✚● 11----D
18-7 ✜● 11 ----B
18-8 ✦✚●▼ 8 7 1 70 - - 290 A
18-9 ✦✚●▼ 7 5 2 80 110 250 280 I
18-10 ✦✚●▼ 4 4 - 120 240 - A
18-11 ✦✚●▼ 5 5 - 170 265 - A
18-12 ✦✚● 6 6 80 - - 280 A
18-13 ✦✚●▼ 4 3 1 80 110 250 280 A
18-14 ✜▼2 1 1 80 110 250 280 A
18-15 ✦✚● 44 - 120 240 - A,C=Ir. B,D=Con.
18-16 ✦✜● 11 ----C
18-17 ✦✜● 7 5 2 18-9 100° I
18-18 ✦✜● 7 5 2 18-9 250° I
18-19 ✦✜●▼10 10 80 120 240 - A
18-20 ✦✜● 5 5 90 180 270 - A
18-22 ✦✜●▼ 3 3 70 145 215 290 D
18-23 ✦✜● 10 10 18-1 100° A(B,C,F,G) I(all others)
Layouts by Shell Size
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
N
Z
Y
W
X
Mating Face view of pin inserts
Alternate Insert Position (Rotation)
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
62
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
18-24 ✦✜● 10 10 18-1 250° A(B,C,F,G) I(all others)
18-25 ✦✜● 2 2 18-3 100° D
18-26 ✦✜● 2 2 18-3 250° D
18-27 ✦✜● 3 1 2 18-5 100° D
18-28 ✦✜● 3 1 2 18-5 250° D
18-29 ✦✜●▼ 5 5 90 180 270 - A
18-30 ✦✜● 5 5 18-20 110° A
18-31 ✦✜● 5 5 18-20 260° A
18-420 ✦1 HV 24 KVdc, 17 KVac
18-51 ✜● 66 18-12 A=Ir.; B, E=Con.; D=Cu; C, F=Dummy
18-52 ✜● 55 18-11 A=Ir.; B=Con.; C=Ch.; D=Al.; E=Dummy
18-53 ✜● 66 18-12 A, D=Ir.; B, E=Con.; C, F=Dummy
18-54 ✜● 44 18-15 A, C=Al.; B, D=Ch.
18-56 ✜● 10 10 18-1 45° A, C, E, G, I=Ir.; B, D, F, H, J=Con.
18-57 ✜● 66 18-12 45° A, C, E=Al.; B, D, F=Ch.
18-59 ✜● 66 18-12 45° A, C=Ir.; B, E, F=Con.; D=Cu
18-60 ✜● 55 18-11 45° A, D=Al.; B, C,=Ch.; E=Cu
18-61 ✜● 66 18-12 A, C=Ir.; B, D=Con.; E=Ch.; F=Al.
18-62 ✜● 66 18-12 A, B, C=Ir.; D, E, F=Con.
18-63 ✜● 44 18-15 A, C=Con.; B, D=Cu
18-65 ✜● 66 18-12 A=Ir.; B=Con.; Balance=Cu
18-66 ✜● 10 10 18-1 A, C, E, G, I=Cu; B, D, F, H, J=Con.
18-67 ✜● 66 18-12 A, C, E=Cu; B, D, F=Con.
18-68 ✜● 55 18-11 A, D=Al.; B, C=Ch.; E=Cu
18-69 ✜● 10 10 18-1 A=Al.; B=Ch.; Balance=Cu
18-70 ✜● 55 18-11 A=Ir.; B=Con.; C=Ch.; D=Al.; E=Cu
18-71 ✜● 44 18-15 A=Con.; Balance=Cu
18-72 ✜● 44 18-15 D=Con.; Balance=Cu
18-73 ✜● 752 18-9 A=Al.; D=Ch.; Balance=Cu
18-74 ✜● 66 18-12 A=Ch.; B=Al.; D=Ir.; E=Cu; C, F=Con.
20A16 ✦13 13 20-11 182° I
20A37 ✦4 4 20-4 250° D
20-2 ✜● 11----D
20-3 ✦✜●▼ 3 3 70 145 215 290 D
20-4 ✦✚●▼ 4 4 45 110 250 - D
20-6 ✦✜●▼ 3 3 70 145 215 290 D
20-7 ✦✚●▼ 8 8 80 110 250 280 A(B,C.F,G) I(all others)
20-8 ✦✚● 6 4 2 80 110 250 280 I
20-11 ✦✚●▼13 13 - - - - I
Layouts by Shell Size
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
20-14 ✦✚● 5 3 2 80 110 250 280 A
20-15 ✦✚●▼ 7 7 80 - - 280 A
20-16 ✦✚●▼ 9 7 2 80 110 250 280 A
20-17 ✦✜●▼ 6 1 5 90 180 270 - A
20-18 ✦✚●▼ 9 6 3 35 110 250 325 A
20-19 ✦✚●▼ 3 3 90 180 270 - A
20-20 ✜● 4 3 1 80 110 250 280 A
20-21 ✦✚●▼ 9 8 1 35 110 250 325 A
20-22 ✚● 6 3 3 80 110 250 280 A
20-23 ✦✚●▼ 2 2 35 110 250 325 A
20-24 ✦✚● 4 2 2 35 110 250 325 A
20-25 ✦✜● 13 13 20-11 100° I
20-27 ✦✚●▼14 14 35 110 250 325 A
20-29 ✦✚●▼17 17 80 - - 280 A
20-30 ✦✚● 13 13 20-11 250° I
20-32 ✦✜● 8 8 20-7 260° A(B,C,F,G) I(all others)
20-33 ✦✚●▼11 11 - - - 280 A
20-51 ✜● 33 ----A
20-52 ✜● 44 20-4 315° A=Ir.; B=Con.; C=Ch.; D=Al.
20-56 ✜● 88 20-7 45° A, B, G, H=Ir.; C, D, E, F=Con.
20-57 ✜● 7‡ 7‡ - - - - A
20-58 ✜● 10 5 5 - - - - A
20-59 ✜● 3‡ 3 - - - - A
20-60 ✜● 88 20-7 45° D=Ch.; E=Al.; Balance=Cu
20-61 ✜● 17 17 20-29 45° A, B, M=Cu; Balance=Con.
20-62 ✜● 77 20-15 80° A, C, E=Al.; B, D, F=Ch.; G=Cu
20-64 ✜● 14 14 20-27 A=Al.; C=Ch.; Balance=Cu
20-65 ✜● 14 14 20-27 A, B, C, D, E, F, G=Ir.; H, I, J, K, L, M, N=Con.
20-66 ✜● 6‡ 5‡ 1 - - - - A
20-67 ✜● 9 7 2 20-16 H=Al.; I=Ch.; Balance=Cu
20-68 ✜● 88 20-7 A, B, G, H=Con.; C, D, E, F=Cu
20-69 ✜● 14 14 20-27 A, B, C, D, E, F, G=Cu; H, I, J, K, L, M, N=Con.
20-70 ✜● 17 17 20-29 A, C, E, G, J, L, N, R, T=Ir.; B, D, F, H, K, M, P, S=Con.
20-71 ✜● 17 17 20-29 S=Al.; R=Ch.; Balance=Cu
20-74 ✜● 17 17 20-29 A, C, E, G, J, L, N, R=Ir.; B, D, F, H, K, M, P, S=Con.;T=Cu
20-75 ✜● 7 7 20-15 G=Al.; Balance=Ch.
20-77 ✜● 9 7 2 20-16 A=Con.; Balance=Cu
20-79 ✜● 8 7 1 - - - - A/D
20-80 ✜● 14 14 20-27 A, C, E, G, I, K, M=Cu; B, D, F, H, J, L, N=Con.
20-81 ✜● 14 14 20-27 A, C, E, G, I, K, M=Ch.; B, D, F, H, J, L, N=Al.
20-82 ✜● 17 17 20-29 A, C, E, G, J, L,N, R=Al.; B, D, F, H, K,M, P, S=Ch.;T=Cu
22-1 ✦✚●▼ 2 2 35 110 250 325 D
22-2 ✦✚●▼ 3 3 70 145 215 290 D
22-4 ✦✚● 4 2 2 35 110 250 325 A
22-5 ✦✚●▼ 6 4 2 35 110 250 325 D
22-6 ✚● 3 1 2 80 110 250 280 D
22-7 ✚● 11----E
22-8 ✦✜●▼ 2 2 35 110 250 325 E
22-9 ✦✚●▼ 3 3 70 145 215 290 E
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
63
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
‡ = Reduced contact crimp pot
Layouts by Shell Size
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
N
Z
Y
W
X
Mating Face view of pin inserts
Alternate Insert Position (Rotation)
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
64
▲
‡ = Reduced contact crimp pot
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
22-10 ✦✚●▼ 4 4 35 110 250 325 E
22-11 ✦✚●▼ 2 2 35 110 250 325 B
22-12 ✦✜● 5 3 2 80 110 250 280 A
22-13 ✦✜●▼ 5 1 4 35 110 250 325 A(A-D) D(E)
22-14 ✦✚●▼19 19 80 110 250 280 A
22-15 ✦✚●▼ 6 1 5 80 110 250 280 A(A-C, E, F) E(D)
22-16 ✦✚●▼ 9 6 3 80 110 250 280 A
22-17 ✜● 9 8 1 80 110 250 280 D(A) A(all others)
22-18 ✦✚●▼ 8 8 80 110 250 280 A(C-E) D(all others)
22-19 ✦✚●▼14 14 80 110 250 280 A
22-20 ✦✜●▼ 9 9 35 110 250 325 A
22-21 ✜● 3 2 1 80 110 250 280 A
22-22 ✦✚● 4 4 - 110 250 - A
22-23 ✦✚●▼ 8 8 35 - 250 - D(H) A(all others)
22-24 ✜● 6 4 2 80 110 250 280 D(C, D, E) A(A, B, F)
22-26 ✦
752
22-27 ✦✚●▼ 9 8 1 80 - 250 280 D(J) A(all others)
22-28 ✦✜●▼ 7 7 80 - - 280 A
22-30 ✦✜● 19 19 22-14 100° A
22-31 ✦✜● 2 2 22-11 100° B
22-32 ✦✜● 6 4 2 22-5 260° D
22-34 ✦✚ ▼ 5 2 3 80 110 250 280 D
22-57 ✜● 19 19 22-14 45° A, C , E, G, J, L , N, R=Ir.; B , D, F, H, K,
M, P, S=Con.; T, U, V=Cu
22-60 ✜● 19 19 22-14 45° U=Al.; N=Ch.; Balance=Cu
22-62 ✜● 8 8 22-23 60° A, B, F, G=Al.; C, D, E, H=Ch.
22-63 ✜● 12 8 4 - - - - A
22-65 ✜● 8‡ 8‡ - - - - A/D
22-68 ✜● 14 24 22-19 45° A, C, E, G, J, L, M=Ir.; B, D, F, H, K, P, N=Con.
22-69 ✜● 14 19 22-19 45° A, C, E, G, J, L, M=Cu; B, D, F, H, K, P, N=Con.
22-70 ✜● 13 5 8 - - - - A
22-71 ✜● 19 4 2 22-14 V=Al.; U=Ch.; Balance=Cu
22-72 ✜● 642 22-5 B=Al.; E=Ch.; Balance=Cu
22-73 ✜● 68 22-5 E=Al.; B=Ch.; Balance=Cu
22-74 ✜● 8 8 22-23 A, C, E, G=Ir.; B, D, F, H=Con.
22-75 ✜● 8 22-23 A=Al.; B, D, G, H=Cu; C=Ch.; E=Ir.; F=Con.
22-76 ✜● 21 W=Con.; Balance=Cu
22-77 ✜● 14 22-19 B, D, F, H, J, K, M, P=Cu; A, E, L=Ir.; C, G, N=Con.
22-78 ✜● 19 22-14 A, C, E, G, H, K, M, P, R, T=Con.; Balance=Cu
Layouts by Shell Size
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
65
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
22-79 ✜● 4 22-10 A, C,=Con.; B, D=Cu
22-80 ●3‡ 3‡ - - - - A
24A35 ✜● 16 14 2 24-7 100° A
24-2 ✦✚●▼ 7 7 80 - - 280 D
24-3 ✜● 7 5 2 80 110 250 280 D
24-5 ✦✚●▼16 16 80 110 250 280 A
24-6 ✦✜●▼ 8 8 80 110 250 280 D(A,G,H) A(all others)
24-7 ✦✚●▼16 14 2 80 110 250 280 A
24-9 ✦✚●▼ 2 2 35 110 250 325 A
24-10 ✦✚●▼ 7 7 80 - - 280 A
24-11 ✦✚●▼ 9 6 3 35 110 250 325 A
24-12 ✦✚● 5 3 2 80 110 250 280 A
24-15 ✜● 16 16 24-5 100° A
24-16 ✦✜●▼ 7 3 3 1 80 110 250 280 D(A,B,F,G) A(C,D,E)
24-17 ✜● 5 3 2 80 110 250 280 D
24-19 ✦12 12 - - - - A
24-20 ✦✚●▼11 9 2 80 110 250 280 D
24-21 ✦✚●▼10 9 1 80 110 250 280 D
24-22 ✦✚● 4 4 45 110 250 - D
24-24 ✦✜● 16 16 24-5 250° A
24-25 ✦✜● 8 8 24-6 100° D(A, G, H) A(all others)
24-26 ✦✜● 8 8 24-6 250° D(A, G, H) A(all others)
24-27 ✦✚●▼ 7 7 80 - - 280 E
24-28 ✦✚●▼24 24 80 110 250 280 I
24-51 ✜● 55 ----A
24-52 ✜● 1 HV 1 30 KVdc, 21 KVac
24-53 ✜● 55 ----A
24-56 ✜● 11 9 2 24-20 45° E=Al.; F=Ch.; Balance=Cu
24-57 ✜● 24 24 24-28 45° A, C, J, V, Y, W, K, E, H, U, S, M=Ch.; Balance=Al.
24-58 ✜● 13 7 3 3 - - - - A
24-59 ✜● 14 7 7 - - - - A
24-60 ✜● 7‡ 7‡ - - - - A
24-62 ✜● 24 24 24-28 A,C, E, G=Ir.; B, D, F, H=Con.; R,T=Ch.; S, U=Al.;Balance=Cu
24-63 ✜● 24 24 24-28 A, C, E, G, J, L, K, N, S, U, W, Y=Cu; B, D,
16 F, H, Q, R, M, P, T, V, X, Z=Con.
24-64 ✜● 16 14 24-5 A, B, C, D, E, F, G, H=Ir.; J, K, L, M, N, P, R, S=Con.
24-65 ✜● 15 4 11 - - - - A
24-66 ✜● 77 ----D
24-67 ✜● 19 19 80 - - 335 I
24-68 ✜● 24 14 24-28 D=Con.; Balance=Cu
24-71 ✜● 7‡ 7‡ - - - - A
24-75 ✜● 7‡ 7‡ - - - - A
24-79 ✜● 5 5 - 108 - - A
24-80 ✜● 23 23 - - - - I
24-81 ✜● 16 24-7 A, C, E, G, I, K, M, N, P=Cu; B, D, F, H, J, L, O=Con.
24-84 ✜● 19 19(18) - - - - A/Coax
24-96 ✜● 28 28 - - - - I
24-AJ ✜● 25 25 80 110 250 280 A
28-1 ✦✚●▼ 9 6 3 80 110 250 280 D(A, E, J) A(all others)
Layouts by Shell Size
‡ = Reduced contact crimp pot
( ) = Number of contacts that are coax
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
28-2 ✦✚●▼14 12 2 35 110 250 325 D
28-3 ✦✚●▼ 3 3 70 145 215 290 E
28-4 ✜● 9 7 2 80 110 250 280 E(G, P, S)D(all others)
28-5 ✜● 5 2 1 2 35 110 250 325 D
28-6 ✦✜●▼ 3 3 70 145 215 290 D
28-7 ✜● 2 2 35 110 250 325 D
28-8 ✦✜●▼12 10 2 80 110 250 280 E(L, M) B(D) A(all others)
28-9 ✦✚●▼12 6 6 80 110 250 280 D
28-10 ✦✚●▼ 7 3 2 2 80 110 250 280 D(G) A(all others)
28-11 ✦✚●▼22 18 4 80 110 250 280 A
28-12 ✦✚●▼26 26 90 180 270 - A
28-13 ✦✜● 26 26 28-12 100° A
28-14 ✜● 11 11 80 110 250 280 D
28-15 ✦✚● 35 35 80 110 250 280 A
28-16 ✦✚●▼20 20 80 110 250 280 A
28-17 ✦✚●▼15 15 80 110 250 280 A(A-L) B(R) D(M-P)
28-18 ✦✚●▼12 12 70 145 215 290 E(M) D(G, H, J, K, L)
A(A, B) I(C, D, E, F)
28-19 ✦✚●▼10 6 4 80 110 250 280 A(C, E, G, J, K, L)
B(H, M) D(A, B)
28-20 ✦✜●▼14 4 10 80 110 250 280 A
28-21 ✦✚● 37 37 80 110 250 280 A
28-22 ✜● 6 3 3 70 145 215 290 D
28-51 ✜● 12 12 80 135 195 - A
28-53 ✜● 22 18 4 28-11 45° J, L=Al.; K, M=Ch.; Balance=Cu
28-58 ✜● 14 4 10 28-20 45° A, C, E, G, K, M=Al.; B, D, F, H, L, N=Ch.; J, P=Cu
28-59 ✜● 17 10 7 - - - - A
28-61 ✜● 37 37 28-21 45° A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N,
d=Ir.; Balance=Con.
28-63 ✜● 14 4 10 28-20 45° A, C, E, G, J=Al.; B, D, F, H, P=Ch.; Balance=Cu
28-64 ✜● 35 35 28-15 A, d=Al.; B, j=Ch.; C, D, E, F, G, N, P, R, S, H, J, K,
L, M, W, X, Y, Z=Con.;Balance=Cu
28-65 ✜● 26 26 28-12 A, C, E, G, J, L, N, R, T, V=Ir.; X, Z=Al.; B, D, F, H,
K, M, P, S, U, W=Con.;Y, a=Ch.; b, d=Cu
28-66 ✜● 16 14 2 - - - - A
28-72 ✜● 3 3(3) - - - - Coax
28-74 ✜● 16‡ 9 7‡ - - - - A
28-75 ✜● 16‡ 9 7‡ - - - - A
28-79 ✜● 16 9 7 - - - - A
28-82 ✜● 642 ----D
28-84 ✜● 99 ----A
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
N
Z
Y
W
X
Mating Face view of pin inserts
Alternate Insert Position (Rotation)
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
66
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Layouts by Shell Size
‡ = Reduced contact crimp pot ( ) = Number of contacts that are coax
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
28-67 ✜● 20 20 28-16 U=Con.; Balance=Cu
28-68 ✜● 35 35 28-15 45° T=Al.; U=Ch.; Balance=Cu
28-69 ✜● 22 18 4 28-11 G=Al.; R=Ch.; Balance=Cu
28-70 ✜● 22 18 4 28-11 A=Al.; B=Ch.; Balance=Cu
28-77 ✜● 22 18 4 28-11 J=Con.; Balance=Cu
28-81 ✜● 37 37 28-21 A, D, S, Z, n, s=Ir.; B, J, K, f, g, r=Con.; G, L, P, b,
e, j=Al.; F, H, T, X, h, k=Ch.; Balance=Cu
28-AY ✜● 95 4 ---- A
32A29 ✜● 23 16 2 3 2 32-6 250° A
32A30 ✜● 5 3 2 32-1 100° E(A) D(all others)
32-1 ✚5 3 2 80 110 250 280 E(A) D(all others)
32-2 ✚● 5 2 3 70 145 215 290 E
32-3 ✚● 9 4 2 2 1 80 110 250 280 D
32-4 ✜● 14 2 12 80 110 250 280 A(F, J, K, N) D(all others)
32-5 ✦✚● 2 2 35 110 250 325 D
32-6 ✦✚● 23 16 2 3 2 80 110 250 280 A
32-7 ✦✚● 35 28 7 80 125 235 280 I(A, B, H, J) A(all others)
32-8 ✦✚● 30 24 6 80 125 235 280 A
32-9 ✜● 14 12 2 80 110 250 280 D
32-10 ✜● 7 3 2 2 80 110 250 280 E(A, F) B(G)
D(E) A(D)
32-12 ✜● 15 10 5 80 110 250 280 A(C, D, E, F, G)
D(all others)
32-13 ✚● 23 18 5 80 110 250 280 D
32-15 ✜● 8 6 2 35 110 250 280 D
32-16 ✜● 23 16 2 3 2 - - - - A
32-17 ✦✚● 4 4 45 110 250 - D
32-19 ✜● 5 3 2 32-1 260° E(A) D(all others)
32-20 ✜● 23 16 2 3 2 32-6 260° A
32-22 ✜● 54 54 80 110 250 280 A
32-25 ✜● 25 25 60 125 - - A
32-31 ✜● 31 31 80 125 215 280 A
32-51 ✜● 30 24 6 32-8 90°M=Ch.; N= Al.; Balance=Cu
32-52 ✜● 862----D
32-53 ✜● 42 37 5 - - - - I/E
32-55 ✜● 30 24 6 32-8 125°M, N=Ch.; O, P=Al.; Balance=Cu
32-56 ✜● 30‡ 24 6 - - - - A
32-57 ✜● 8 6 2(2) - - - - Coax
32-58 ✜● 4 4(4) - - - - Coax
32-60 ✜● 23 15 8(8) - - - - A/Coax
32-62 ✜● 23 16 2 3 (2) 2 - - - - A/Coax
32-64 ✜● 54 54 - - - - I
32-68 ✜● 16 12 4(4) 65 135 225 275 A/Coax
32-73 ✜● 46 46 36 68 - - A
32-75 ✜● 9 2 7(7) - - - - Coax
32-76 ✜● 19 19 80 110 250 280 A
32-79 ✜● 514----D
32-82 ✜● 16 12 4 - - - - A
32-414 ✦52 52 - - - - A
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
67
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Layouts by Shell Size
‡ = Reduced contact crimp pot
( ) = Number of contacts that are coax
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
32-AF ✜● 55 55 80 110 250 280 A
36-1 ✦✜● 22 80 110 250 280 D
36-3 ✜● 6 3 3 70 145 215 290 D
36-4 ✜● 3 3 70 145 215 290 A(B, C) D(A)
36-5 ✦✚● 4 4 45 120 240 - A
36-6 ✦✚● 6 4 2 35 110 250 325 A
36-7 ✦✚● 47 40 7 80 110 250 280 A
36-8 ✦✚● 47 46 1 80 110 250 280 A
36-9 ✦✚● 31 14 14 2 1 80 125 235 280 A
36-10 ✦✚● 48 48 80 125 235 280 A
36-11 ✦✜● 48 48 36-10 100° A
36-12 ✦✜● 48 48 36-10 250° A
36-14 ✜● 16 6 5 5 90 180 270 - D
36-15 ✦✚● 35 35 60 125 245 305 D(m) A(all others)
36-16 ✜● 47 40 7 36-7 100° A
36-17 ✜● 47 40 7 36-7 250° A
36-18 ✜● 31 14 14 2 1 36-9 100° A
36-20 ✜● 34 30 2 2 - - - - A
36-21 ✜● 31 14 14 2 1 36-9 260° A
36-51 ✜● 422----D
36-52 ✜● 52 52 - - - - A
36-54 ✜● 39 31 8 - 110 - - A
36-55 ✜● 39‡ 31 8‡ - - - - A
36-59 ✜● 53‡ 50 3‡ - - - - A
36-60 ✜● 47‡ 40 7‡ - - - - A
36-64 ✜● 4 4(4) - - - - Coax
36-65 ✜● 4 4(4) - - - - Coax
36-71 ✜● 53 50 3 - - - - A
36-73 ✜● 7 7(7) 81 279 - - Coax
36-74 ✜● 44 44 - - - - A
36-75 ✜● 48‡ 48‡ - - - - A
36-76 ✜● 47 47 - - - - A
36-77 ✜● 7 7 81 279 - - D
36-78 ✜● 14 2 12 85 106 254 325 A
36-79 ✜● 20 20 30 110 250 330 A
36-80 ✜● 20‡ 20‡ 30 110 250 330 A
36-83 ✜● 7 7(7) 81 279 - - Coax
36-403 ✦52 52 - - - - A
36-85 ✜● 35‡ 35‡ - - - - A/D
N
Z
Y
W
X
Mating Face view of pin inserts
Alternate Insert Position (Rotation)
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
68
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Layouts by Shell Size
‡ = Reduced contact crimp pot
( ) = Number of contacts that are coax
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z
36-53 ✜● 47 40 7 36-7 45° u, v, w=Al.; x, y, z=Ch.; Balance=Cu
36-56 ✜● 48 48 36-10 A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q,
n, m, u, w, y=Con.; Balance=Cu
36-57 ✜● 47 40 7 36-8 W=Al.; f=Ch.; Balance=Cu
36-58 ✜● 35 35 36-15 H=Al.; G=Ch.; Balance=Cu
36-61 ✜● 35 35 36-15 A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j,
c=Con.; Balance=Cu
36-62 ✜● 48 48 36-10 A, C, E=Al.; B, D, F=Ch.; Balance=Cu
36-82 ✜● 52 52 36-52 v, g=Ir.; p, y, c=Con. x=Ch.; Balance=Cu
36-AF ✜● 48 48 - - - - A
40-1 ✚● 30 24 4 65 130 235 300 D
40-5 ✜● 5 5 33 - - 270 A
40-9 ✚● 47 24 22 1 65 125 225 310 A
40-10 ✜● 29 16 9 4 - - - - A
40-35 ✜● 35 35 70 130 230 290 D
40-53 ✜● 60 60 80 110 250 280 A
40-56 ✚● 85 85 72 144 216 288 A
40-57 ✜● 4 4 30 150 - - E
40-61 ✜● 59 55 3 1 - - - - A
40-62 ✚● 60 60 - - - - A
40-63 ✜● 61‡ 61‡ - - - - A
40-64 ✜● 36 20 3 13(13) - - - - Coax
40-66 ✜● 4 4(4) - - - - Coax
40-67 ✜● 11 1 10(10) - - - - A/Coax
40-68 ✜● 21 21 - - - - A
40-70 ✜● 61 61 - - - - A
40-72 ✜● 11 1 10(10) - - - - A/Coax
40-73 ✜● 61 61 - - - - A
40-74 ✜● 6 1 1(1) 4(4) - - - - A/Coax
40-75 ✜● 514----E
40-80 ✜● 11 1 10 80 - - 280 A
40-81 ✜● 62‡ 62‡ - - - - A
40-85 ✜● 60‡ 60‡ - - - - A
40-86 ✜● 4 4(4) - - - - E/Coax
40-87 ✜● 7 7 37 74 285 322 D
40-58 ✜● 85 85 40-56 A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t,
v, x, z, AB, AD, AF, AJ, AL,AN, AP, AS, AU, AW, AY, BA,
BC, BE, BH, BK, BM, BP, BS, BU=Ir.; Balance=Con.
40-59 ✜● 85 85 40-56 B=Ch.; C=Con.; Balance=Cu
40-77 ✜● 60 60 40-56 55, 60=Ir.; 57, 58, 59=Con.; 56=Ch.; Balance=Cu
40-78 ✜● 60 60 40-53 50, 51=Ir.; 27, 28, 29, 31, 32, 34, 36, 37=Con.; 25, 39, 40, 41=Al.;
43,44,45, 46, 47, 48, 49, 52, 53, 54=Ch.; Balance=Cu
40-AG ✜● 38 38 37 74 285 322 A
DEGREES OF ROTATION
CONTACTS
SIZES
SERIES
SERVICE
RATING
69
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Layouts by Shell Size
SERIES KEY: AIB (●=GT) AIT (✚=MS; ✜=non QPL) 97 (✦=97) P-lok (▼) Thermocouple ()
CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.)
‡ = Reduced contact crimp pot
( ) = Number of contacts that are coax
SERIES CONTACT SIZES DEGREES OF ROTATION SERVICE
LAYOUT 97 AIT AIB P-lok TOTAL 20 16 12 8 4 0 W X Y Z RATING
32-48 ✜● 48 48 80 * * * I
32-59 ✜● 42 40 2 * * * * A
40-82 ✜● 62 62 * * * * A
40-AD ✜● 844****A
40-AT ✜● 43 18 24 1 * * * * A
40-AV ✜● 3 3#2/0 * * * * D
Special Inserts Available
*Call for details.
70
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Pin & Socket Crimp Contacts
SOLDER THERMOCOUPLE CONTACTS
TYPE PINS SOCKETS
16S Alumel 10-040799-02P* 10-040799-02S*
Chromel 10-040799-01P* 10-040799-01S*
Iron 10-040799-03P* 10-040799-03S*
Constantan 10-040799-04P* 10-040799-24S*
16 Alumel 10-040799-12P* 10-040799-12S*
Chromel 10-040799-11P* 10-040799-11S*
Iron 10-040799-13P* 10-040799-13S*
Constantan 10-040799-14P* 10-040799-14S*
Thermocouple Types: J = Iron-Constantan K = Alumel-Chromel
T = Copper-Constantan E = Chromel-Constantan
SOLDER THERMOCOUPLE CONTACTS
TYPE PINS SOCKETS
12 Alumel 10-040799-42P* 10-040799-42S*
Chromel 10-040799-41P* 10-040799-41S*
Iron 10-040799-43P* 10-040799-43S*
Constantan 10-040799-44P* 10-040799-44S*
16S
16
12
*Call for availability
† 16S contacts are used in 8S, 10S, 10SL, 12S, 14S and 16S
connector sizes only.
PIN CONTACT SOCKET CONTACT
CONTACT
SIZE WIRE
SIZE
PIN CONTACT WIRE SEALING
RANGE
INCHES (mm)
WIRE STRIP
LENGTHS
INCHES (mm)
SOCKET CONTACT
SILVER GOLD SILVER GOLD
16S 16-18-20 AIC16S-16P AIC16S-16PG AIC16S-16S AIC16S-16SG
12-14 AIC16S-12P AIC16S-12PG AIC16S-12S AIC16S-12SG C4
14-16 AIC16S-14P AIC16S-14PG AIC16S-14S AIC16S-14SG C3
18-20 AIC16S-20P AIC16S-20PG AIC16S-20S AIC16S-20SG C13
20-22 AIC16S-22P AIC16S-22PG AIC16S-22S AIC16S-22SG C14
22-24 AIC16S-24P AIC16S-24PG AIC16S-24S AIC16S-24SG C2
16 16-18-20 AIC16-16P AIC16-16PG AIC16-16S AIC16-16SG
12-14 AIC16-12P AIC16-12PG AIC16-12S AIC16-12SG C4
14-16 AIC16-14P AIC16-14PG AIC16-14S AIC16-14SG C3
18-20 AIC16-18P AIC16-18PG AIC16-18S AIC16-18SG C13
20-22 AIC16-20P AIC16-20PG AIC16-20S AIC16-20SG C14
20-24 AIC16-2024P AIC16-2024PG AIC16-2024S AIC16-2024SG C36
22-24 AIC16-22P AIC16-22PG AIC16-22S AIC16-22SG C2
12 12-14 AIC12-12P AIC12-12PG AIC12-12S AIC12-12SG .312 (7.9)
8-10 AIC12-8P AIC12-8PG AIC12-8S AIC12-8SG C5
10-12 AIC12-10P AIC12-10PG AIC12-10S AIC12-10SG C8
14-16 AIC12-14P AIC12-14PG AIC12-14S AIC12-14SG C9
16-18 AIC12-16P AIC12-16PG AIC12-16S AIC12-16SG C7
18-20 AIC12-18P AIC12-18PG AIC12-18S AIC12-18SG C6
20-22 AIC12-20P AIC12-20PG AIC12-20S AIC12-20SG C40
88AIC8-8P AIC8-8PG AIC8-8S AIC8-8SG
8 High Power - - AIC8-8SRAD -
10-12 AIC8-10P AIC8-10PG AIC8-10S AIC8-10SG C10
12-14 AIC8-12P AIC8-12PG AIC8-12S AIC8-12SG C38
44AIC4-4P AIC4-4PG AIC4-4S AIC4-4SG
4 High Power - - AIC4-4SRAD -
8 AIC4-8P AIC4-8PG AIC4-8S AIC4-8SG C15
00AIC0-0P AIC0-0PG AIC0-0S AIC0-0SG .
0 High Power - - AIC0-0SRAD -
0-2 AIC0-2P AIC0-2PG AIC0-2S AIC0-2SG C11
4 AIC0-4P AIC0-4PG AIC0-4S AIC0-4SG C12
PART NUMBER
16S
8
.312
(7.9)
.090-.118
(2.3-3.0)
.126-.177
(3.2-4.5)
.150-.256
(3.8-6.5)
.279-.366
(7.1-9.3)
.750
(19.0) 394-.539
(10.0-13.7)
Bolded items are standard crimp contacts
.500
(12.7)
.563
(14.3)
.312
(7.9)
4
0
16
WIRE STRIP
LENGTH WIRE RANGE
12
.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
71
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
Pin & Socket Crimp Contacts
TOOLS
CRIMP
LOCATOR &
DIE SETS
LOCATOR
COLOR
PILOT
PIN/INSERTION
GUIDE FOR
SOCKETS
WIRE
HOLE FILLER
(COLOR)
EXTRACTION
TOOL
CRIMP TOOLS
INSERTION
TOOL
MS27488-16-1
(Blue)
TH29-1
AF8 (hand)
WA27F (pneumatic)
††
MS27488-12-1
(Yellow)
MS27488-8-1
(White)
MS27488-4-1
(Blue)
MS27488-0-1
(Yellow)
400BHD
-
-
-
10-242758-008
-
-
DAK282
AIC4INS
AIC0INS
AIC4EXT
AIC0EXT
Green DAK168-12
10-242758-012
Pin-Blue
Socket-Green
10-242758-016 DAK168-16
DRK59
Kit with
Multiple Tips
Red
AF8
TH29-1 414DA
WA27F
400BHD
ACCESSORIES
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Locator
414DA-8N
Die Set
4025-Pin
4026-Socket
Locator
414DA-4N
Die Set
4043
Locator
414DA-0N
Die Set
4042
†† Call for additional tool accessories.
-
-
RG212/U 21-33060-11() 21-33059-11()
COAX
CONTACT
SIZE
COAX
WIRE
SIZE
PINS
PART NUMBERS WIRE SEALING
RANGE
INCHES (mm)
WIRE STRIP
LENGTHS
INCHES (mm)
SOCKETS
SILVER GOLD SILVER GOLD
WIRE
HOLE
FILLER
MIN. MAX.
72
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Pin & Socket Coax Contacts
COAX
PIN
COAX
SOCKET
WIRE
RANGE
WIRE
STRIP
LENGTH ACCESSORIES
4
8
RG140/U
RG302/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
21-33060-10()
RG59B/U
RG62A/U
RG62B/U
RG210/U
0.279
(7.1 mm)
0.366
(9.3 mm)
21-33034-3(1)
21-33014-3(5)
21-33016-1(3)
21-33130-3 ()
21-33064-20()
31-33060-12() 21-33059-12()
Blue
10-405996-4
0.150
(3.8 mm)
0.256
(6.5 mm)
White
10-405996-8
( ) Various platings available. Availability of coax contacts varies widely. Call for details.
21-33014-1(5)
21-33016-5(3)
21-33130-2()
21-33034-2(1) 21-33033-2(1)
21-33048-2()
21-33013-1(5)
21-33047-2()
21-33015-5(3)
21-33129-2()
31-33034-5(1)
21-33033-3(1)
21-33014-5(5)
21-33016-2(3)
21-33130-5()
21-33064-21()
21-33033-3(1)
21-33013-5(5)
21-33015-2(3)
21-33129-3()
21-33063-21()
21-33013-(6)
21-33047-3()
21-33129-6()
RG58C/U
RG141A/U
RG303/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG180B/U
RG195A/U
21-33034-1
21-33014-21
21-33048-1()
21-33130-1()
21-33014-22
21-33033-1
21-33013-21
21-33047-1()
21-33129-1 ()
21-33013-22
0.126
(3.2 mm)
0.177
(4.5 mm)
Yellow
10-405996-12
21-33013-3(5)
21-33015-1(3)
21-33129-3()
21-33063-20()
21-33014-6(5)
21-33048-3()
21-33130-6()
21-33033-6
21-33034-6
21-33034-8
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
21-33014-8(5)
21-33033-8
21-33130-8()
21-33013-8(5)
21-33129-8()
RG178B/U
RG196A/U
21-33059-10()
21-33013-5(5)
21-33129-4()
21-33033-4
21-33014-5(5)
21-33130-4()
21-33034-4
RG55B/U
RG142A/U
RG142B/U
RG223/U
Call for details
Call for details
Call for details
12
73
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
TOOLS
COAX
WIRE
SIZE HAND CRIMP TOOL
CRIMP
DIE/LOCATOR
COAX CLAMP
NUT WRENCH
USE
LOCATOR
12
-
8-
4RG212/U M22520/5-01 M22520/5-39 A
Pin & Socket Coax Contacts
B
M22520/10-07
M22520/10-01 B
M22520/5-45
M22520/5-01
A
M22520/10-05
M22520/10-01
B
M22520/10-07
A
B
M22520/5-01 M22520/5-45
M22520/10-01 A
M22520/10-07
RG140/U
RG302/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG58C/U
RG141A/U
RG303/U
RG59B/U
RG62A/U
RG62B/U
RG210/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG180B/U
RG195A/U
RG161/U
RG174A/U
RG179B/U
RG187A/U
RG188A/U
RG316/U
RG178B/U
RG196A/U
RG55B/U
RG142A/U
RG142B/U
RG223/U
A
B
11-8676-1
11-8676-2
M22520/10-05
M22520/10-01
11-8676-3
11-8676-2
11-8676-4
COAX
CONTACT
SIZE
M22520/10-01 M22520/5-01 Crimp Dies
74
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/GT AIBC/ACA-B
Plugs Receptacles
AIB/GT AIBC/ACA-B
Components
Ferrule/Sleeve
Compression
Ring
O-Ring
Barrel/Shell
Insert/
Insulator
Contacts
Wave Spring
and Skid
Washer
(Optional)
Coupling Nut
Individual
Wire Sealing
Grommet
Endbell/
Backshell/
Cable Clamp
Dimensions
All dimensions in inches (millimeters in parenthesis)
Printed Circuit Contacts
10SL .188 .567
(4.78) (14.40)
14S .188 .567
(4.78) (14.40)
16S .188 .567
(4.78) (14.40)
16 .188 .622
(4.78) (15.80)
18 .188 .622
(4.78) (15.80)
20 .188 .622
(4.78) (15.80)
22 .188 .622
(4.78) (15.80)
24 .188 .622
(4.78) (15.80)
28 .188 .657
(4.78) (16.69)
32 .188 .720
(4.78) (18.29)
36 .188 .720
(4.78) (18.29)
40 .188 .720
(4.78) (18.29)
SHELL
SIZE
H SERIES
SX
12 .134 .070
(3.4) (1.78)
16 .063 .030
(1.6) (0.76)
CONTACT
SIZE DP
S
X
P
D
.138
75
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
76
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Dimensions
Style 0, 2, 20, 30 Receptacles
R
RS
S
T
RS
N
M
N
P
B
L
L
KK2
.6250-24 UNEF 1.087
(27.6)
.7500-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.331
(33.8)
1.0000-20 UNEF 1.331
(33.8)
1.1250-18 UNEF 1.331
(33.8)
1.2500-18 UNEF 1.331
(33.8)
1.3750-18 UNEF 1.331
(33.8)
1.6250-18 UNEF 1.406
(35.7)
1.8750-16 UN 1.469
(37.3)
2.0625-16 UN 1.469
(37.3)
2.3125-16 UN 1.469
(37.3)
B
THREAD
CLASS 2A
L
+ .012
(+ 0.3)
10SL .717 .717 .110 .717 1.000 .126 .626
(18.20) (18.2) (2.8) (18.2) (25.4) (3.2) (15.9)
14S .717 .969 .126 .906 1.181 .126 .756
(18.20) (24.6) (3.2) (23.0) (30.0) (3.2) (19.2)
16S .717 1.079 .126 .969 1.280 .126 .882
(18.20) (27.4) (3.2) (24.6) (32.5) (3.2) (22.4)
16 .846 1.079 .126 .969 1.280 .126 .882
(21.50) (27.4) (3.2) (24.6) (32.5) (3.2) (22.4)
18 .907 1.213 .157 1.063 1.378 .126 1.008
(23.05) (30.8) (4.0) (27.0) (35.0) (3.2) (25.6)
20 .907 1.346 .157 1.157 1.496 .126 1.142
(23.05) (34.2) (4.0) (29.4) (38.0) (3.2) (29.0)
22 .907 1.472 .157 1.252 1.614 .126 1.268
(23.05) (37.4) (4.0) (31.8) (41.0) (3.2) (32.2)
24 .907 1.610 .157 1.374 1.752 .146 1.390
(23.05) (40.9) (4.0) (34.9) (44.5) (3.7) (35.3)
28 .947 1.839 .157 1.563 2.000 .146 1.630
(24.05) (46.7) (4.0) (39.7) (50.8) (3.7) (41.4)
32 .947 2.102 .157 1.752 2.244 .169 1.882
(24.05) (53.4) (4.0) (44.5) (57.0) (4.3) (47.8)
36 .947 2.346 .157 1.937 2.500 .169 2.063
(24.05) (59.6) (4.0) (49.2) (63.5) (4.3) (52.4)
40 .947 2.579 .157 2.185 2.752 .169 2.323
(24.05) (65.5) (4.0) (55.5) (69.9) (4.3) (59.0)
SHELL
SIZE
M
+.016-.000
(+0.4-0.0)
N
+.000-.006
(+0.00-0.15)
P
± .008
(±0.2)
R
± .004
(±0.1)
S
± .012
(±0.3)
T
+.004-.000
(+0.1-0.0)
KK
MAX.
1.890 .787
(48.0) (20.0)
1.890 .945
(48.0) (24.0)
1.890 1.024
(48.0) (26.0)
2.205 1.024
(56.0) (26.0)
2.244 1.161
(57.0) (29.5)
2.244 1.299
(57.0) (33.0)
2.244 1.417
(57.0) (36.0)
2.244 1.575
(57.0) (40.0)
2.244 1.811
(57.0) (46.0)
2.362 2.028
(60.0) (51.5)
2.362 2.283
(60.0) (58.0)
2.362 2.539
(60.0) (64.5)
L
MAX.
KK2
MAX.
0, 20, 30
N
MP
KK
L
2
0, 20, 30
RV
All dimensions in inches (millimeters in parenthesis)
All dimensions in inches (millimeters in parenthesis)
Dimensions
Style 0, 20, 30 Receptacles
L
JJBBZ
J
K
.6250-24 UNEF .409 .374 1.969 3.017
(10.4) (9.5) (50) (76.6)
.7500-20 UNEF .520 .374 1.969 3.048
(13.2) (9.5) (50) (77.4)
.8750-20 UNEF .638 .374 1.969 3.048
(16.2) (9.5) (50) (77.4)
.8750-20 UNEF .638 .374 2.362 3.304
(16.2) (9.5) (60) (83.9)
1.0000-20 UNEF .756 .374 2.362 3.419
(19.2) (9.5) (60) (86.8)
1.1875-18 UNEF .867 .374 2.362 3.404
(22.0) (9.5) (60) (86.5)
1.1875-18 UNEF .965 .374 2.362 3.408
(24.5) (9.5) (60) (86.6)
1.4375-18 UNEF 1.094 .374 2.560 3.495
(27.8) (9.5) (65) (88.8)
1.4375-18 UNEF 1.228 .374 2.560 3.629
(31.2) (9.5) (65) (92.2)
1.7500-18 UNS 1.488 .433 2.560 3.777
(37.8) (11.0) (65) (95.9)
2.0000-18 UNS 1.780 .465 3.150 3.821
(45.2) (11.8) (80) (97.0)
2.2500-16 UN 2.016 .465 3.150 3.821
(51.2) (11.8) (80) (97.0)
B
THREAD
CLASS 2A
F
MIN.
K
MIN.
L1
MAX.
L2
MAX.
.138 .461 1.969 .303 .524 .610
(3.5) (11.7) (50) (7.7) (13.3) (15.5)
.138 .461 1.969 .417 .669 .752
(3.5) (11.7) (50) (10.6) (17.0) (19.1)
.138 .461 1.969 .531 .862 .941
(3.5) (11.7) (50) (13.5) (21.9) (23.9)
.138 .453 2.362 .531 .862 .941
(3.5) (11.5) (60) (13.5) (21.9) (23.9)
.138 .453 2.362 .575 .862 .941
(3.5) (11.5) (60) (14.6) (21.9) (23.9)
.138 .500 2.559 .736 1.031 1.165
(3.5) (12.7) (65) (18.7) (26.2) (29.6)
. .138 .500 2.559 .819 1.031 1.165
(3.5) (12.7) (65) (20.8) (26.2) (29.6)
.138 .500 2.559 .969 1.358 1.488
(3.5) (12.7) (65) (24.6) (34.5) (37.8)
. .138 .500 2.559 1.063 1.358 1.488
(3.5) (12.7) (65) (27.0) (34.5) (37.8)
.138 .598 2.756 1.311 1.717 1.882
(3.5) (15.2) (70) (33.3) (43.6) (47.8)
.138 .598 3.150 1.516 1.717 1.882
(3.5) (15.2) (80) (38.5) (43.6) (47.8)
.138 .610 3.150 1.898 2.071 2.276
(3.5) (15.5) (80) (48.2) (52.6) (57.8)
J
± .008
(±0.2)
K
+ .020
(±0.5)
L
MAX.
Z
MIN.
BB
MAX.
JJ
+ .008
(+0.2)
FLG
77
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
L1
B Thread
F
K
L2
B Thread
K
F
78
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
All dimensions in inches (millimeters in parenthesis)
Dimensions
Style 1 Cable Receptacle
Q
S
N
MP
B
L
L
KK
.6250-24 UNEF 1.087
(27.6)
.7500-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.331
(33.8)
1.0000-20 UNEF 1.331
(33.8)
1.1250-18 UNEF 1.331
(33.8)
1.2500-18 UNEF 1.331
(33.8)
1.3750-18 UNEF 1.331
(33.8)
1.6250-18 UNEF 1.406
(35.7)
1.8750-16 UN 1.469
(37.3)
2.0625-16 UN 1.469
(37.3)
2.3125-16 UN 1.469
(37.3)
B
THREAD
CLASS 2A
L
+ .012
(+ 0.3)
10SL .717 .717 .110 .811 .992
(18.20) (18.2) (2.8) (20.6) (25.2)
14S .717 .969 .126 1.000 1.173
(18.20) (24.6) (3.2) (25.4) (29.8)
16S .717 1.079 .126 1.126 1.272
(18.20) (27.4) (3.2) (28.6) (32.3)
16 .8461 1.079 .126 1.126 1.272
(21.50) (27.4) (3.2) (28.6) (32.3)
18 .907 1.213 .157 1.248 1.370
(23.05) (30.8) (4.0) (31.7) (34.8)
20 .907 1.346 .157 1.374 1.488
(23.05) (34.2) (4.0) (34.9) (37.8)
22 .907 1.472 .157 1.500 1.618
(23.05) (37.4) (4.0) (38.1) (41.1)
24 .907 1.610 .157 1.626 1.756
(23.05) (40.9) (4.0) (41.3) (44.6)
28 .947 1.839 .157 1.874 2.004
(24.05) (46.7) (4.0) (47.6) (50.9)
32 .947 2.102 .157 2.126 2.248
(24.05) (53.4) (4.0) (54.0) (57.1)
36 .947 2.346 .157 2.386 2.504
(24.05) (59.6) (4.0) (60.6) (63.6)
40 .947 2.579 .157 2.618 2.756
(24.05) (65.5) (4.0) (66.5) (70.0)
SHELL
SIZE
M
+.016 -.000
(+0.4 - 0.0)
N
+.000 -.006
(+0.00-0.15)
P
± .008
(±0.2)
Q
± .008
(±0.2)
S
MAX.
1.890 .787
(48.0) (20.0)
1.890 .945
(48.0) (24.0)
1.890 1.024
(48.0) (26.0)
2.205 1.024
(56.0) (26.0)
2.244 1.161
(57.0) (29.5)
2.244 1.299
(57.0) (33.0)
2.244 1.417
(57.0) (36.0)
2.244 1.575
(57.0) (40.0)
2.244 1.811
(57.0) (46.0)
2.362 2.028
(60.0) (51.5)
2.362 2.283
(60.0) (58.0)
2.362 2.539
(60.0) (64.5)
L
MAX.
KK
MAX.
RV
All dimensions in inches (millimeters in parenthesis)
Dimensions
Style 1 Cable Receptacle
L
JJBBZ
J
K
.138 .461 1.969 .303 .524 .610
(3.5) (11.7) (50) (7.7) (13.3) (15.5)
.138 .461 1.969 .417 .669 .752
(3.5) (11.7) (50) (10.6) (17.0) (19.1)
.138 .461 1.969 .531 .862 .941
(3.5) (11.7) (50) (13.5) (21.9) (23.9)
.138 .453 2.362 .531 .862 .941
(3.5) (11.5) (60) (13.5) (21.9) (23.9)
.138 .453 2.362 .575 .862 .941
(3.5) (11.5) (60) (14.6) (21.9) (23.9)
.138 .500 2.559 .736 1.031 1.165
(3.5) (12.7 (65) (18.7) (26.2) (29.6)
. .138 .500 2.559 .819 1.031 1.165
(3.5) (12.7) (65) (20.8) (26.2) (29.6)
.138 .500 2.559 .969 1.358 1.488
(3.5) (12.7) (65) (24.6) (34.5) (37.8)
. .138 .500 2.559 1.063 1.358 1.488
(3.5) (12.7) (65) (27.0) (34.5) (37.8)
.138 .598 2.756 1.311 1.717 1.882
(3.5) (15.2) (70) (33.3) (43.6) (47.8)
.138 .598 3.150 1.516 1.717 1.882
(3.5) (15.2) (80) (38.5) (43.6) (47.8)
.138 .610 3.150 1.898 2.071 2.276
(3.5) (15.5) (80) (48.2) (52.6) (57.8)
J
± .008
(±0.2)
K
+ .020
(±0.5)
L
MAX.
Z
MIN.
BB
MAX.
JJ
+ .008
(+0.2)
.6250-24 UNEF .409 .374 1.969 3.684
(10.4) (9.5) (50) (93.6)
.7500-20 UNEF .520 .374 1.969 3.748
(13.2) (9.5) (50) (95.2)
.8750-20 UNEF .638 .374 1.969 3.748
(16.2) (9.5) (50) (95.2)
.8750-20 UNEF .638 .374 2.362 3.71
(16.2) (9.5) (60) (94.2)
1.0000-20 UNEF .756 .374 2.362 4.094
(19.2) (9.5) (60) (104.0)
1.1875-18 UNEF .867 .374 2.362 4.094
(22.0) (9.5) (60) (104.0)
1.1875-18 UNEF .965 .374 2.362 4.102
(24.5) (9.5) (60) (104.2)
1.4375-18 UNEF 1.094 .374 2.560 3.950
(27.8) (9.5) (65) (100.4)
1.4375-18 UNEF 1.228 .374 2.560 4.392
(31.2) (9.5) (65) (111.6)
1.7500-18 UNS 1.488 .433 2.560 5.038
(37.8) (11.0) (65) (128.0)
2.0000-18 UNS 1.780 .465 3.150 4.354
(45.2) (11.8) (80) (110.6)
2.2500-16 UN 2.016 .465 3.150 4.354
(51.2) (11.8) (80) (110.6)
B
THREAD
CLASS 2A
F
MIN.
K
MIN.
L1
MAX.
L2
MAX.
79
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
G
L1
B Thread
F
K
F
L2
B Thread
K
F
L
80
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
All dimensions in inches (millimeters in parenthesis)
Style 4 Rubber-Covered Plugs
B
L
L
KK
.6250-24 UNEF 1.087
(27.6)
1.0000-20 UNEF 1.331
(33.8)
1.1250-18 UNEF 1.331
(33.8)
1.2500-18 UNEF 1.331
(33.8)
1.3750-18 UNEF 1.331
(33.8)
1.6250-18 UNEF 1.406
(35.7)
1.8750-16 UN 1.469
(37.3)
2.0625-16 UN 1.469
(37.3)
2.3125-16 UN 1.469
(37.3)
B
THREAD
CLASS 2A
L
+ .012
(+ 0.3)
SHELL
SIZE
Q
MAX.
S
MAX.
1.890 .787
(48.0) (20.0)
2.244 1.161
(57.0) (29.5)
2.244 1.299
(57.0) (33.0)
2.244 1.417
(57.0) (36.0)
2.244 1.575
(57.0) (40.0)
2.244 1.811
(57.0) (46.0)
2.362 2.028
(60.0) (51.5)
2.362 2.283
(60.0) (58.0)
2.362 2.539
(60.0) (64.5)
L
MAX.
KK
MAX.
RV
Q
S
10SL 1.319 1.122
(33.5) (28.5)
18 1.929 1.713
(49.0) (43.5)
20 2.028 1.811
(51.5) (46.0)
22 2.224 1.988
(56.5) (50.5)
24 2.362 2.126
(60.0) (54.0)
28 2.638 2.402
(67.0) (61.0)
32 2.992 2.661
(76.0) (67.6)
36 3.240 2.925
(82.3) (74.3)
40 3.465 3.150
(88.0) (80.0)
Dimensions
Style 4 Rubber-Covered Plugs
L
JJBBZ
J
K
.138 .461 1.969 .303 .524 .610
(3.5) (11.7) (50) (7.7) (13.3) (15.5)
.138 .453 2.362 .575 .862 .941
(3.5) (11.5) (60) (14.6) (21.9) (23.9)
.138 .500 2.559 .736 1.031 1.165
(3.5) (12.7) (65) (18.7) (26.2) (29.6)
. .138 .500 2.559 .819 1.031 1.165
(3.5) (12.7) (65) (20.8) (26.2) (29.6)
.138 .500 2.559 .969 1.358 1.488
(3.5) (12.7) (65) (24.6) (34.5) (37.8)
. .138 .500 2.559 1.063 1.358 1.488
(3.5) (12.7) (65) (27.0) (34.5) (37.8)
.138 .598 2.756 1.311 1.717 1.882
(3.5) (15.2) (70) (33.3) (43.6) (47.8)
.138 .598 3.150 1.516 1.717 1.882
(3.5) (15.2) (80) (38.5) (43.6) (47.8)
.138 .610 3.150 1.898 2.071 2.276
(3.5) (15.5) (80) (48.2) (52.6) (57.8)
J
± .008
(±0.2)
K
+ .020
(±0.5)
L
MAX.
Z
MIN.
BB
MAX.
.6250-24 UNEF .409 .374 1.969 3.684
(10.4) (9.5) (50) (93.6)
1.0000-20 UNEF .756 .374 2.362 4.094
(19.2) (9.5) (60) (104.0)
1.1875-18 UNEF .867 .374 2.362 4.094
(22.0) (9.5) (60) (104.0)
1.1875-18 UNEF .965 .374 2.362 4.102
(24.5) (9.5) (60) (104.2)
1.4375-18 UNEF 1.094 .374 2.560 3.950
(27.8) (9.5) (65) (100.4)
1.4375-18 UNEF 1.228 .374 2.560 4.392
(31.2) (9.5) (65) (111.6)
1.7500-18 UNS 1.488 .433 2.560 5.038
(37.8) (11.0) (65) (128.0)
2.0000-18 UNS 1.780 .465 3.150 4.354
(45.2) (11.8) (80) (110.6)
2.2500-16 UN 2.016 .465 3.150 4.354
(51.2) (11.8) (80) (110.6)
B
THREAD
CLASS 2A
F
MIN.
K
MIN.
L1
MAX.
L2
MAX.
GLF
Dimensions
JJ
+ .008
(+0.2)
81
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
All dimensions in inches (millimeters in parenthesis)
L1
B Thread
F
K
L2
B Thread
K
F
82
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
All dimensions in inches (millimeters in parenthesis)
Dimensions
Style 6, 6HD Plugs
Q1
Q2
B
L
L
KK
.6250-24 UNEF 1.087
(27.6)
.7500-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.087
(27.6)
.8750-20 UNEF 1.331
(33.8)
1.0000-20 UNEF 1.331
(33.8)
1.1250-18 UNEF 1.331
(33.8)
1.2500-18 UNEF 1.331
(33.8)
1.3750-18 UNEF 1.331
(33.8)
1.6250-18 UNEF 1.406
(35.7)
1.8750-16 UN 1.469
(37.3)
2.0625-16 UN 1.469
(37.3)
2.3125-16 UN 1.469
(37.3)
B
THREAD
CLASS 2A
L
+ .012
(+ 0.3)
10SL .898 1.007
(22.8) (25.5)
14S 1.150 1.259
(29.2) (31.9)
16S 1.260 1.410
(32.0) (35.8)
16 1.260 1.410
(32.0) (35.8)
18 1.437 1.547
(36.5) (39.2)
20 1.571 1.681
(39,9) (42.6)
22 1.697 1.847
(43.1) (46.9)
24 1.835 1.965
(46.6) (49.9)
28 2.102 2.222
(53.4) (56.4)
32 2.366 2.482
(60.1) (63.0)
36 2.610 2.721
(66.3) (69.1)
40 2.850 2.953
(72.4) (75.0)
SHELL
SIZE
Q1
MAX.
Q2
MAX.
1.890 .787
(48.0) (20.0)
1.890 .945
(48.0) (24.0)
1.890 1.024
(48.0) (26.0)
2.205 1.024
(56.0) (26.0)
2.244 1.161
(57.0) (29.5)
2.244 1.299
(57.0) (33.0)
2.244 1.417
(57.0) (36.0)
2.244 1.575
(57.0) (40.0)
2.244 1.811
(57.0) (46.0)
2.362 2.028
(60.0) (51.5)
2.362 2.283
(60.0) (58.0)
2.362 2.539
(60.0) (64.5)
L
MAX.
KK
MAX.
6RV6HD
All dimensions in inches (millimeters in parenthesis)
Dimensions
Style 6, 6HD Plugs
L
JJBBZ
J
K
.138 .461 1.969 .303 .524 .610
(3.5) (11.7) (50) (7.7) (13.3) (15.5)
.138 .461 1.969 .417 .669 .752
(3.5) (11.7) (50) (10.6) (17.0) (19.1)
.138 .461 1.969 .531 .862 .941
(3.5) (11.7) (50) (13.5) (21.9) (23.9)
.138 .453 2.362 .531 .862 .941
(3.5) (11.5) (60) (13.5) (21.9) (23.9)
.138 .453 2.362 .575 .862 .941
(3.5) (11.5) (60) (14.6) (21.9) (23.9)
.138 .500 2.559 .736 1.031 1.165
(3.5) (12.7 (65) (18.7) (26.2) (29.6)
.138 .500 2.559 .819 1.031 1.165
(3.5) (12.7) (65) (20.8) (26.2) (29.6)
.138 .500 2.559 .969 1.358 1.488
(3.5) (12.7) (65) (24.6) (34.5) (37.8)
.138 .500 2.559 1.063 1.358 1.488
(3.5) (12.7) (65) (27.0) (34.5) (37.8)
.138 .598 2.756 1.311 1.717 1.882
(3.5) (15.2) (70) (33.3) (43.6) (47.8)
.138 .598 3.150 1.516 1.717 1.882
(3.5) (15.2) (80) (38.5) (43.6) (47.8)
.138 .610 3.150 1.898 2.071 2.276
(3.5) (15.5) (80) (48.2) (52.6) (57.8)
J
± .008
(±0.2)
K
+ .020
(±0.5)
L
MAX.
Z
MIN.
BB
MAX.
JJ
+ .008
(+0.2)
.6250-24 UNEF .409 .374 1.969 3.684
(10.4) (9.5) (50) (93.6)
.7500-20 UNEF .520 .374 1.969 3.748
(13.2) (9.5) (50) (95.2)
.8750-20 UNEF .638 .374 1.969 3.748
(16.2) (9.5) (50) (95.2)
.8750-20 UNEF .638 .374 2.362 3.71
(16.2) (9.5) (60) (94.2)
1.0000-20 UNEF .756 .374 2.362 4.094
(19.2) (9.5) (60) (104.0)
1.1875-18 UNEF .867 .374 2.362 4.094
(22.0) (9.5) (60) (104.0)
1.1875-18 UNEF .965 .374 2.362 4.102
(24.5) (9.5) (60) (104.2)
1.4375-18 UNEF 1.094 .374 2.560 3.950
(27.8) (9.5) (65) (100.4)
1.4375-18 UNEF 1.228 .374 2.560 4.392
(31.2) (9.5) (65) (111.6)
1.7500-18 UNS 1.488 .433 2.560 5.038
(37.8) (11.0) (65) (128.0)
2.0000-18 UNS 1.780 .465 3.150 4.354
(45.2) (11.8) (80) (110.6)
2.2500-16 UN 2.016 .465 3.150 4.354
(51.2) (11.8) (80) (110.6)
B
THREAD
CLASS 2A
F
MIN.
K
MIN.
L1
MAX.
L2
MAX.
GLF
83
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
L1
B Thread
F
K
L2
B Thread
K
F
84
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
All dimensions in inches (millimeters in parenthesis)
Dimensions
Plug Style 6, 6HD Right Angle
J
L
F
B
Q1
Q2
10SL .898 1.007
(22.8) (25.5)
14S 1.150 1.259
(29.2) (31.9)
16S 1.260 1.410
(32.0) (35.8))
16 1.260 1.410
(32.0) (35.8))
18 1.437 1.547
(36.5) (39.2)
20 1.571 1.681
(39,9) (42.6)
22 1.697 1.847
(43.1) (46.9)
24 1.835 1.965
(46.6) (49.9)
28 2.102 2.222
(53.4) (56.4)
32 2.366 2.482
(60.1) (63.0)
36 2.610 2.721
(66.3) (69.1)
40 2.850 2.953
(72.4) (75.0)
SHELL
SIZE
Q1
MAX.
Q2
MAX.
66HD T
B THREAD
CLASS 2A F
MAX.
J
MIN.
K
MAX.
L
MAX.
.6250-24 UNEF .337 .370 1.181 1.772
(8.5) (9.4) (30.0) (45.0)
.7500-20 UNEF .462 .370 1.181 1.850
(11.7) (9.4) (30.0) (47.0)
.8750-20 UNEF .587 .370 1.181 1.890
(14.9) (9.4) (30.0) (48.0)
.8750-20 UNEF .587 .370 1.181 2.244
(14.9) (9.4) (30.0) (57.0)
1.0000-20 UNEF .685 .370 1.378 2.283
(17.4) (9.4) (35.0) (58.0)
1.1875-18 UNEF .810 .370 1.378 2.402
(20.5) (9.4) (35.0) (61.0)
1.1875-18 UNEF .915 .370 1.378 2.402
(23.2) (9.4) (35.0) (61.0)
1.4375-18 UNEF 1.025 .370 1.575 2.598
(26.0) (9.4) (40.0) (66.0)
1.4375-18 UNEF 1.139 .370 15.75 2.598
(28.9) (9.4) (40.0) (53.4)
1.7500-18 UNEF 1.447 .433 1.772 2.835
(36.7) (11.0) (45.0) (72.0)
2.0000-18 UNS 1.687 .496 1.969 2.953
(42.8) (12.6) (50.0) (75.0)
2.2500-16 UN 1.923 .496 2.165 3.071
(48.8) (12.6) (55.1) (78.0)
All dimensions in inches (millimeters in parenthesis)
SHELL
SIZE
P
±.008
(±0.2)
R
±.004
(±0.1)
S
± .012
(±0.3)
T
+.004-.000
(+0.1-0.0)
L
APPROX.
10SL 1.087 .898 .110 .717 1.000 .126
(27.6) (22.8) (2.8) (18.2) (25.4) (3.2)
14S 1.091 1.150 .126 .906 1.181 .126
(27.7) (29.2) (3.2) (23.0) (30.0) (3Í.2)
16S 1.091 1.260 .126 .969 1.280 .126
(27.7) (32.0) (3.2) (24.6) (32.5) (3.2)
16 1.469 1.260 .126 .969 1.280 .126
(37.3) (32.0) (3.2) (24.6) (32.5) (3.2)
18 1.500 1.437 .157 1.063 1.378 .126
(38.1) (36.5) (4.0) (27.0) (35.0) (3.2)
20 1.500 1.571 .157 1.157 1.496 .126
(38.1) (39.9) (4.0) (29.4) (38.0) (3.2)
22 1.500 1.697 .157 1.252 1.614 .126
(38.1) (43.1) (4.0) (31.8) (41.0) (3.2)
24 1.598 1.835 .157 1.374 1.752 .146
(40.6) (46.6) (4.0) (34.9) (44.5) (3.7)
28 1.626 2.102 .157 1.563 2.000 .146
(41.3) (53.4) (4.0) (39.7) (50.8) (3.7)
32 1.764 2.366 .157 1.752 2.244 .169
(44.8) (60.1) (4.0) (44.5) (57.0) (4.3)
36 1.764 2.610 .157 1.937 2.500 .169
(44.8) (66.3) (4.0) (49.2) (63.5) (4.3)
40 1.764 2.850 .157 2.185 2.752 .169
(44.8) (72.4) (4.0) (55.5) (69.9) (4.3)
Q
MAX.
Dimensions
6B Panel Plug
P
Q
L
N N
PM
L
S
R
SR
T
R
RS
S
T
P
±.008
(±0.2)
R
±.004
(±0.1)
S
±.012
(±0.3)
T
+.004-.000
(+0.1-0.0)
1.488 .717 .717 .110 .717 1.000 .126
(37.7) (18.2) (18.2) (2.8) (18.2) (25.4) (3.2)
1.488 .717 .969 .126 .906 1.181 .126
(37.7) (18.2) (24.6) (3.2) (23.0) (30.0) (3.2)
1.488 .717 1.079 .126 .969 1.280 .126
(37.7) (18.2) (24.6) (3.2) (23.0) (30.0) (3.2)
2.049 .846 1.079 .126 .969 1.280 .126
(52.0) (21.5) (27.4) (3.2) (24.6) (32.5) (3.2)
2.049 .907 1.213 .157 1.063 1.378 .126
(52.0) (23.0) (30.8) (4.0) (27.0) (35.0) (3.2)
2.049 .907 1.346 .157 1.157 1.496 .126
(52.0) (23.0) (34.2) (4.0) (29.4) (38.0) (3.2)
2.049 .907 1.472 .157 1.252 1.614 .126
(52.0) (23.0) (37.4) (4.0) (31.8) (41.0) (3.2)
2.049 .90 1.610 .157 1.374 1.752 .146
(52.0) (23.0) (40.9) (4.0) (34.9) (44.5) (3.7)
2.049 .947 1.839 .157 1.563 2.000 .146
(52.0) (24.0) (46.7) (4.0) (39.7) (50.8) (3.7)
2.049 .947 2.102 .157 1.752 2.244 .160
(52.0) (24.0) (53.4) (4.0) (44.5) (57.0) (4.3)
2.049 .947 2.346 .157 1.937 2.500 .169
(52.0) (24.0) (59.6) (4.0) (49.2) (63.5) (4.3)
2.049 .947 2.579 .157 2.185 2.752 .160
(52.0) (24.0) (65.5) (4.0) (55.5) (69.9) (4.3)
L
Max.
M
+.016-.000
(+0.4-0.0)
N
+.000-.006
(+0.00-0.15)
Style TB Thru-Bulkhead Receptacle
TB
6B
85
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
86
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
All dimensions in inches (millimeters in parenthesis)
SHELL
SIZE
10SL .8750-20 UNEF .441 .094 .205 1.425 .965 .717 .157 1.062 1.252 .6250-24 UNEF
(11.2) (2.4) (5.2) (36.2) (24.5) (18.2) (4.0) (27) (31.8)
14S 1.1250-18 UNEF .575 .094 .295 1.531 1.055 .969 .189 1.312 1.626 .7500-20 UNEF
(14.6) (2.4) (7.5) (38.9) (26.8) (24.6) (4.8) (33) (41.3)
16S 1.2500-180 UNEF .618 .094 .295 1.531 1.055 1.079 .189 1.500 1.748 .8750-20 UNEF
(15.7) (2.4) (7.5) (38.9) (26.8) (27.4) (4.8) (38) (44.4)
16 1.2500-18 UNEF .618 .094 .295 1.909 1.264 1.079 .189 1.500 1.748 .8750-20 UNEF
(15.7) (2.4) (7.5) (48.5) (32.1) (27.4) (4.8) (38) (44.4)
18 1.3750-18 UNEF .661 .094 .354 1.941 1.327 12.13 .189 1.562 1.874 1.0000-20 UNEF
(16.8) (2.4) (9.0) (49.3) (33.7) (30.8) (4.8) (40) (47.6)
20 1.5000-18 UNEF .709 .094 .358 1.941 1.327 1.346 .189 1.750 2.000 1.1250-18 UNEF
(18.0) (2.4) (9.1) (49.3) (33.7) (34.2) (4.8) (44) (50.8)
22 1.6250-18 UNEF .795 .094 .358 1.941 1.327 1.472 .189 2.000 2.252 1.2500-18 UNEF
(20.2) (2.4) (9.1) (49.3) (33.7) (37.4) (4.8) (51) (57.2)
24 1.75000-18 UNEF .795 .094 .358 1.953 1.327 1.610 .189 2.000 2.252 1.3750-18 UNEF
(20.2) (2.4) (9.1) (49.6) (33.7) (40.9) (4.8) (51) (57.2)
28 2.0000-18 UNS .886 .094 .394 2.043 1.386 1.839 .220 2.188 2.500 1.6250-18 UNEF
(22.5) (2.4) (10.0) (51.9) (35.2) (46.7) (5.6) (56) (63.5)
32 2.2500-16 UN .972 .094 .394 2.043 1.386 2.102 .220 2.438 2.748 1.8750-16 UN
(24.7) (2.4) (10.0) (51.9) (35.2) (53.4) (5.6) (62) (69.8)
36 2.5000-16 UN 1.059 .094 .327 2.043 1.386 2.346 .220 2.812 3.000 2.0625-16 UN
(26.9) (2.4) (8.3) (51.9) (35.2) (59.6) (5.6) (71) (76.2)
40 2.7500-16 UN 1.165 .094 .327 2.043 1.386 2.579 .220 3.000 3.248 2.3125-16 UN
(29.6) (2.4) (8.3) (51.9) (35.2) (65.5) (5.6) (76) (82.5)
L
± .010
(±0.3)
M
± .012
(±0.3)
N
+.000-.0006
(+0.00-0.15)
J
WALL THICKNESS
MIN. MAX.
G
±.012
(±0.3)
B
THREAD
CLASS 2A
P
± .007
(±0.2)
R
± .016
(±0.4)
S
± .12
(±0.3)
Dimensions
Style 7, 70 Jam Nut Receptacles
G
S
S
G
R
N
M
P
BO-Ring
J
N
M
P
BO-Ring
BB
L
J
BB
THREAD
CLASS 2A
770
G (TP)
10SL 0.717 (18.2) 0.134 (3.4) 0.646 (16.4) 0.728 (18.5)
12S 0.811 (20.6) 0.134 (3.4) 0.646 (16.4) 0.854 (21.7)
14S 0.906 (23.0) 0.134 (3.4) 0.776 (19.7) 0.980 (24.9)
16S 0.969 (24.6) 0.134 (3.4) 0.902 (22.9) 1.091 (27.7)
16 0.969 (24.6) 0.134 (3.4) 0.902 (22.9) 1.091 (27.7)
18 1.063 (27.0) 0.134 (3.4) 1.028 (26.1) 1.224 (31.1)
20 1.157 (29.4) 0.134 (3.4) 1.161 (29.5) 1.358 (34.5)
22 1.252 (31.8) 0.134 (3.4) 1.287 (32.7) 1.488 (37.8)
24 1.374 (34.9) 0.154 (3.9) 1.417 (36.0) 1.626 (41.3)
28 1.563 (39.7) 0.154 (3.9) 1.654 (42.0) 1.854 (47.1)
32 1.752 (44.5) 0.177 (4.5) 1.902 (48.3) 2.118 (53.8)
36 1.937 (49.2) 0.177 (4.5) 2.150 (54.6) 2.362 (60.0)
40 2.185 (55.5) 0.177 (4.5) 2.409 (61.2) 2.610 (66.3)
Dimensions
Panel Cutouts
SHELL 7/70 PANEL CUTOUT
SIZE F - FLAT D - DIAMETER
10SL 0.830 (21.1) 0.875 (22.2)
14S 1.080 (27.4) 1.125 (28.6)
16S/16 1.210 (30.7) 1.250 (31.7)
18 1.320 (33.5) 1.375 (34.9)
20 1.450 (36.8) 1.500 (38.1)
22 1.570 (39.9) 1.625 (41.3)
24 1.700 (43.2) 1.750 (44.5)
28 1.950 (49.5) 2.000 (50.8)
32 2.200 (55.9) 2.250 (57.2)
36 2.450 (62.2) 2.500 (63.5)
40 2.700 (68.6) 2.750 (69.9)
10SL .303 (7.70)
14S .303 (7.70)
16S .303 (7.70)
16 .242 (6.15)
18 .303 (7.70)
20 .303 (7.70)
22 .303 (7.70)
24 .303 (7.70)
28 .343 (8.70)
32 .309 (7.85)
36 .309 (7.85)
40 .309 (7.85)
Panel Thickness
Dim. J-flange in front of panel
Dim. K-flange at rear of panel
See sealing screws on page 257.
SHELL REAR
SIZE MOUNT
Rear Mount
D
H Dia.
G
G
J
K
All dimensions in inches (millimeters in parenthesis)
STYLE 0, 2, 20, 30, TB FLANGE
SHELL
SIZE
MOUNTING
HOLE DIAMETER
HJ FRONT K REAR
87
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
➥
88
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Accessories
MS3057-A Cable Clamp
MS3057-C Waterproof Cable Clamp
Standard MS3057-C waterproof cable clamp with
mechanical strain relief for use with style F, L and T
endbells. Internal neoprene gland and compression
ring will seal a broad range of round cable diameters
as listed below. For reduction of cable diameters,
order the appropriate MS3420A bushing in table.
NEOPRENE
SEALING
GLAND
METAL
COMPRESSION
DISC
CABLE
CLAMP
SHELL WIRE DIAMETER INCHES (mm) OPTIONAL BUSHINGS
SIZE PART NUMBER MAX. MIN. PART NUMBER MAX. WIRE DIA. (mm)
10SL MS3057-4C .312 (7.93) .188 (4.80) MS3420-4A .219 (5.56)
14S MS3057-6C .438 (11.12) .281 (7.10) MS3420-6A .312 (7.93)
MS3420-4A .219 (5.56)
16/16S MS3057-8C .530 (13.48) .312 (7.90) MS3420-8A .438 (11.10)
MS3420-6A .312 (7.93)
18 MS3057-10C .625 (15.87) .375 (9.50) MS3420-10A .438 (11.10)
MS3420-6A .312 (7.93)
20/22 MS3057-12C .750 (19.00) .500 (12.70) MS3420-12A .540 (13.74)
MS3420-8A .438 (11.10)
24/28 MS3057-16C .940 (23.8) .625 (15.90) MS3420-16A .750 (19.00)
MS3420-12A .540 (13.74)
MS3420-8A .438 (11.10)
32 MS3057-20C 1.25 (31.75) - MS3420-20A .938 (23.80)
MS3420-16A .750 (19.00)
MS3420-12A .540 (13.74)
36 MS3057-24C 1.38 (35.00) 1.00 (25.40) MS3420-24A 1.12 (28.5)
MS3420-18A .938 (23.80)
MS3420-16A .750 (19.00)
40 MS3057-28C 1.62 (41.25) 1.25 (31.80) MS3420-28A 1.25 (31.75)
MS3420-20A .940 (23.80)
MS3420-16A .750 (19.00)
Standard MS3057 cable clamps have a dual clamping action to provide a balanced,
positive hold on the wires and greatly reduce moisture transmission. This cable clamp
accepts MS3420 bushings. MS3420 bushings can be nested to reduce the inside
diameter to more closely match the diameter of the cable or wire bundle.
STANDARD CLAMP
ALUMINUM W/ MAXIMUM
SHELL THREAD LOW COST ALUMINUM W/ STAINLESS STEEL CABLE DIAMETER
SIZE 2B CAST ZINC BRASS SCREWS SCREWS INCH (mm)
8S 1/2-24UNEF 97-3057-1003 MS3057-3A M85049/41-3A .220 (5.58)
10S/10SL 5/8-24UNEF 97-3057-1004 MS3057-4A M85049/41-4A .312 (7.92)
12/12S/12SL 5/8-24UNEF 97-3057-1004 MS3057-4A M85049/41-4A .312 (7.92)
14/14S 3/4-20UNEF 97-3057-1007 MS3057-6A M85049/41-6A .438 (11.13)
16/16S 7/8-20UNEF 97-3057-1008 MS3057-8A M85049/41-8A .562 (14.27)
18 1-20UNEF 97-3057-1010 MS3057-10A M85049/41-10A .625 (15.88)
20/22 1 3/16-18UNEF 97-3057-1012 MS3057-12A M85049/41-12A .750 (19.05)
24/28 1 7/16-18UNEF 97-3057-1016 MS3057-16A M85049/41-16A .938 (23.83)
32 1 3/4-18UNS 97-3057-1020 MS3057-20A M85049/41-20A 1.250 (31.75)
36 2-18UNS 97-3057-1024 MS3057-24A M85049/41-24A 1.375 (34.92)
40 2 1/4UNS-16 - MS3057-28A M85049/41-28A 1.625 (41.28)
STANDARD CLAMP AND TELESCOPIC BUSHING
LOW COST
ZINC WITH BUSHING BUSHING ID
BUSHING INCLUDED INCH (mm)
97-3057-1003-1 MS3420-3 0.130 (3.3)
97-3057-1004-1 MS3420-4 0.220 (5.6)
97-3057-1004-1 MS3420-4 0.220 (5.6)
97-3057-1007-1 MS3420-6 0.312 (7.9)
97-3057-1008-1 MS3420-8 0.437 (11.1)
97-3057-1010-1 MS3420-10 0.562 (14.3)
97-3057-1012-1 MS3420-12 0.625 (15.9)
97-3057-1016-1 MS3420-16, -12 0.625 (15.9)
97-3057-1020-1 MS3420-20, -16 0.750 (19.1)
97-3057-1024-1 MS3420-24, -20 0.937 (23.8)
- - - -
All dimensions in inches (millimeters in parenthesis)
SHELL SIZE INCHES (mm) (mm)
INCHES
CABLE CLAMP
PART NUMBER
MAX. CABLE OD MIN. CABLE OD THREAD
CLASS 2B
10SL, 12S 9767-12-4 0.219 (5.55) 0.020 (0.51) 5/8-24 UNEF
14S 9767-14-4 0.219 (5.55) 0.020 (0.51) 3/4-20 UNEF
14S 9767-14-6 0.344 (8.73) 0.176 (4.47) 3/4-20 UNEF
16S, 16 9767-16-4 0.219 (5.55) 0.020 (0.51) 7/8-20 UNEF
16S, 16 9767-16-6 0.344 (8.73) 0.176 (4.47) 7/8-20 UNEF
16S, 16 9767-16-8 0.438 (11.12) 0.177 (4.50) 7/8-20 UNEF
18 9767-18-6 0.344 (8.73) 0.176 (4.47) 1-20 UNEF
18 9767-18-8 0.438 (11.12) 0.177 (4.50) 1-20 UNEF
18 9767-18-10 0.563 (14.29) 0.292 (7.42) 1-20 UNEF
20, 22 9767-22-8 0.438 (11.12) 0.177 (4.50) 1-3/16-18 UNEF
20, 22 9767-22-10 0.563 (14.29) 0.292 (7.42) 1-3/16-18 UNEF
20, 22 9767-22-12 0.688 (17.46) 0.370 (9.40) 1-3/16-18 UNEF
24, 28 9767-28-10 0.563 (14.29) 0.292 (7.42) 1-7/16-18 UNEF
24, 28 9767-28-12 0.688 (17.46) 0.370 (9.40) 1-7/16-18 UNEF
24, 28 9767-28-16 0.844 (21.43) 0.536 (13.61) 1-7/16-18 UNEF
32 9767-32-20 1.031 (26.19) 0.590 (14.99) 1-3/4-18 UNS
36 9767-36-16 0.844 (21.43) 0.536 (13.61) 2-18 UNS
Accessories
9767 Cable Clamps
SIZE
FITS IN
CABLE CLAMP
INSIDE
DIAMETER
INSIDE
DIAMETER
1ST BUSHING
PART NUMBER
2ND NESTED
BUSHING
10SL MS3420-4 .220 (5.59) NONE - MS3057-4A
12S MS3420-4 .220 (5.59) NONE - MS3057-4A
14S MS3420-6 .312 (7.92) NONE - MS3057-6A
16S MS3420-8 .437 (11.10) NONE - MS3057-8A
16 MS3420-8 .437 (11.10) NONE - MS3057-8A
18 MS3420-10 .562 (14.30) NONE - MS3057-10A
20 MS3420-12 .625 (15.90) NONE - MS3057-12A
22 MS3420-12 .625 (15.90) NONE - MS3057-12A
24 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A
28 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A
32 MS3420-20 .937 (23.80) MS3420-16 .750 (19.05) MS3057-20A
36 MS3420-24 1.250 (31.75) MS3420-20 .937 (23.80) MS3057-24A
40 MS3420-28 1.375 (34.92) MS3420-24 1.250 (31.75) SE96-28A4
For use with style A cable clamps and AIT/MS style E/F endbells to eliminate
dust, dirt and oil from entering the cable clamp. Bushings can be nested,
one inside the other, to reduce the inside diameter and form a better seal
against the cable jacket. Each bushing will accept the next smallest bushing.
MS3420 Telescoping Bushings
9767 waterproof cable clamp with mechanical strain relief. An
internal neoprene gland seal bushing and compression washer
will seal a broad range of round cable diameters as listed below.
For use with MS3057-C cable clamps (Style C) to reduce the wire
sealing diameter. Bushings can be nested, one inside the other, to
progressively reduce the inside diameter of the cable clamp. The
column labeled "reduction bushings" shows the acceptable nesting
options for each clamp.
MS3420-A Reduction Bushings
89
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
All dimensions in inches (millimeters in parenthesis)
90
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Metal dust caps are used to protect the contacts when the connectors are left unmated. Dust caps come with metal
chain lanyards. Dummy Receptacles are for front or rear panel mounting. AIB/GT Series connectors have bayonet
ramps. The center of the connector is closed. Dummy receptacles mount on the same centers and have the same
outside dimensions as a STYLE 2 receptacle. A version with a clearance hole through the middle of the connector is
also available. Call for ordering information.
D9
Accessories
Synthetic rubber gaskets are used to insure a moisture tight seal between a receptacle and
the panel. Gaskets are available for front or rear panel mounting of style 0, 2, 20, 30 and
TB connectors. Gasket thickness is approximately .031" (1 mm), for nonconductive and low
temperature types.
Conductive shielding gaskets contain an imbedded metal screen for EMI/RFI shielding in
addition to moisture sealing. Gaskets are available for front or rear panel mounting of style
30 and TB connectors. Gasket thickness is .020" (.5 mm).
Gaskets
NON-CONDUCTIVE
LOW TEMPERATURE
CONDUCTIVE
SHELL SIZE NON-CONDUCTIVE
10SL 10-040450-010 10-040450-10S 10-036675-010 10-580649-011
14S 10-040450-014 10-040450-14S 10-036675-014 10-580649-014
16S 10-040450-016 10-040450-16S 10-036675-016 10-580649-016
16 10-040450-016 10-040450-16S 10-036675-016 10-580649-016
18 10-040450-018 10-040450-18S 10-036675-018 10-580649-018
20 10-040450-020 10-040450-20S 10-036675-020 10-580649-020
22 10-040450-022 10-040450-22S 10-036675-022 10-580649-022
24 10-040450-024 10-040450-24S 10-036675-024 10-580649-024
28 10-040450-028 10-040450-28S 10-036675-028 10-580649-026
32 10-040450-032 10-040450-32S 10-036675-032 10-580649-032
36 10-040450-036 10-040450-36S 10-036675-036 10-580649-036
40 10-040450-040 10-040450-40S 10-036675-040 10-580649-040
Metal Dust Caps With Sash Chain
10SL 10-580903-11* 10-580902-11* 10-580595-11* 10-564843-101
14S 10-580903-14* 10-580902-14* 10-580595-14* 10-564843-141
16S 10-580903-16* 10-580902-16* 10-580595-16* 10-564843-161
16 10-580903-17* 10-580902-17* 10-580595-17* 10-564843-161
18 10-580903-18* 10-580902-18* 10-580595-18* 10-564843-181
20 10-580903-20* 10-580902-20* 10-580595-20* 10-564843-201
22 10-580903-22* 10-580902-22* 10-580595-22* 10-564843-221
24 10-580903-24* 10-580902-24* 10-580595-24* 10-564843-241
28 10-580903-28* 10-580902-28* 10-580595-28* 10-564843-281
32 10-580903-32* 10-580902-32* 10-580595-32* 10-564843-321
36 10-580903-36* 10-580902-36* 10-580595-36* 10-564843-161
40 10-580903-40* 10-580902-40* 10-580595-40* 10-564843-401
SHELL
SIZE
PLUG CAP RECEPTACLE PLUG SEAL RINGDUMMY RECEPTACLES
DUST CAPS
FRONT MOUNT REAR MOUNT
1,8 ±0,2
3 ±0,2
*Select code for plating:
Z = Black anodize
3 = Olive drab cadmium plate
9 = Olive drab cadmium nickel base
G = Electroless nickel
U = Green zinc cobalt
Y = Black Zinc cobalt
NOTE: Hand crimp tools can be
used with size 16S, 16 & 12
contacts. Size 8, 4 and 0 contacts
require the use of air powered
crimp tools. Call us for assistance
in the use of these tools.
1. Strip the wires to the
appropriate length. See
strip lengths on the Contact
Selection Guide, ➥page 72.
2. Open the crimp tool by
squeezing the handles. Push
the latch on the turret to pop
up the locator. Attach the
turret to the crimp tool using
the two captive hex bolts in
the turret.
3. Select the proper locator
position for your contact by
rotating the locator until the
proper color is aligned with
the index mark. Push locator
back down until it snaps into
position.
4. Adjust dial for proper wire
gauge. To change the dial
setting, remove the lock pin
and lift center of dial. Turn
to the desired wire gauge.
Replace lock pin on dial.
5. Cycle the tool before inserting
the contact to be sure the tool
is in the open position. Drop
the contact, mating end first,
into the crimp cavity of the
tool. Squeeze the tool handle
just enough to grip the contact
without actually crimping it.
Assembly Instructions
LOCK PIN
1
2
1
4
1
6
1
8
2
0
2
2
2
4
2
6
W
I
R
E
S
I
Z
E
8
7
6
5
4
3
2
1
S
E
L
N
O
.
DIAL
6. Insert the stripped wire into
the contact with a slight
twisting motion. Be sure all
wire strands are inside the
contact. Squeeze the handle
to cycle the tool. The handle
will not release until the
contact is completely crimped.
1. Slide the rear accessories over
the wire bundle in the proper
sequence for re-assembly:
cable clamp and/or endbell
first, then ferrule and (if used)
coupling nut.
2. Insert individual wires
through the proper holes in
the grommet. Use isopropyl
alcohol as a lubricant.
3. Solder wires to appropriate
contacts on the rear of the
connector. A document
covering standard soldering
practices is available upon
request by fax or mail.
Please call.
4. Fixture the connector for
reassembly using the endbell
assembly tools on ➥page 96.
5. Slide the grommet down
the wires (lubricating the
grommet with isopropyl
alcohol will help).
6. Fill all unused grommet
cavities with a wire hole
filler to maintain the sealing
integrity of the connector.
➥(page 73).
7. Slide coupling nut, ferrule, and
endbell accessories over rear
of the connector and tighten.
For tooling, ➥see page 96.
Solder Contacts
LOCATOR LATCH CRIMP
TOOL
R
A
I
S
E
T
O
R
O
T
A
T
E
SE
L
DM
PIN
LOCATOR
COLOR
CONTACT
SIZE
LOCATOR
INDEX MARK
LOCATOR
COLOR CODE
LATCH
TURRET
16S Red Red
16 Blue Green
12 Green Green
SOCKET
LOCATOR
COLOR
Crimp Tool Operation
91
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
92
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
1. Slide the rear accessories
over the wire bundle in
the proper sequence for
re-assembly: cable clamp
and/or endbell first, then
ferrule, and coupling nut.
2. Use the proper insertion tool
from the Contact Selection
Chart on page 73.
Place the contact in the tool.
The tool should butt against
the shoulder of the contact.
Contact sizes 16S, 16, and 12
use a pliers style tool. Contact
sizes 8, 4 and 0 use a tool
with a ‘C’ shaped shaft.
3. Lubricate the
grommet
with isopropyl
alcohol (do
not use any lubricant other
than isopropyl alcohol).
Insert the contact through
the appropriate cavity in the
grommet. Sizes 16S, 16 and
12 socket contacts must be
installed using guide pins.
See the Contact Selection
Guide on page 73
for Insertion Guide (Pilot)
Pin part numbers.
Assembly Instructions
Insertion of Contacts
GUIDE
(PILOT) PIN
SHOULDER
INSERTION
TOOL
Crimp Tool Operation
(continued)
WIRE
CRIMP
CHECK TO BE
SURE CONDUCTOR
IS VISIBLE
THROUGH WIRE
INSPECTION HOLE
INSULATION SHOULD BUTT UP
AGAINST THE END OF THE CONTACT.
MICRO-SECTIONS
Enlargement of micro-section permits a
final inspection of crimp quality. This test
is recommended whenever new tools or
new types of wire or contacts are used.
7. Remove the crimped contact.
Pull on the wire slightly to be
sure it is properly crimped. Be
sure the contact is not bent or
damaged in any way. Visually
inspect the crimp:
CONNECTOR
ASSEMBLY
FIXTURE
4. Place the connector into an
assembly fixture (fixtures are
available for production use,
call us.) If you are not using
a fixture, be sure to allow
clearance on the mating face
of the connector for the
guide pins to come through
the connector during insertion.
5. Lubricate the contact cavities
of the connector insulator
with isopropyl alcohol (do
not use any other type of
lubricant).
6. Using guide pins where
necessary, push straight
down with a firm even
pressure until the contact
snaps into position in the
proper cavity. Start at the
center of the pattern and
work toward the outer edges.
Crimp Tensile Strength
Initial minimum
pullout force in lb.
(before conditioning)
SIZE WIRE GAUGE LB.
16 20 20
18 40
16 50
12 14 70
12 110
8 8 185
4 4 450
0 0 800
➥
➥
Assembly Instructions
Insertion of Contacts
2. Use the proper extraction tool
from the Contact Selection
Chart on page 73. The
extraction tool can be used for
both pin and socket contacts
by removing the shaft from the
handle and reversing it for pin
or socket extraction.
3. On the mating face of the
connector, insert the tool
over the pin contact or into
the socket contact until the
tool bottoms. Apply a slow
continuous pressure to push
the contact out the rear of the
connector. When the shoulder
of the tool “thunks” against
the insulator, the contact is
extracted.
PIN EXTRACTION END
HANDLE
PIN
CONTACT SOCKET
CONTACT
CROSS SECTION
OF CONNECTOR
CROSS SECTION
OF CONNECTOR
LOCK RING
9. A wire hole filler must be
inserted into the grommet
behind the unused contacts
to maintain the sealing
integrity of the connector.
See the Contact Selection
Chart on page 73
for wire hole fillers.
SOFT JAW
PLIERS
Extraction of Contacts
1.
Remove the endbell accessories
and slide them back over the
wires. Use the appropriate endbell
tools as shown on page 96.
UNCRIMPED
CONTACTS
7. Fill any unused cavities with
contacts.
8. Check the mating face of the
connector to insure that all
the same size contacts are
on the same plane (fully
inserted). If not, the contact
is not fully inserted. Remove
the contact using the proper
extraction tool and procedure
and reinsert. Do not attempt
to reinsert the insertion tool
to correct the problem.
SOCKET
EXTRACTION END
4. Carefully remove the extraction
tool from the connector to
avoid damage to the insulator.
10. Place the connector back in
the fixture for re-assembly.
Slide the connector accessories
back down the cable over the
rear of the connector and
tighten. Use the appropriate
endbell tools as shown on
page 73.
93
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
➥
➥
➥
➥
94
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
Amphenol How To Order Guide
AIB/GT Series Connectors
Have a unique requirement?
Doing standard modifications quickly
is our specialty! To save cost, minimize
lead time, and reduce assembly labor,
please call 800-523-0727
for engineering assistance.
Mateability with identical contact arrangements
Connector Style Mateable with Style
GT00 GT06/062/064/065/08
GT01 GT06/062/064/065/08
GT02 GT06/062/064/065/08
GT020 GT06/062/064/065/08
GT030 GT06/062/064/065/08
GT06/062/064/065 GT00/01/02/020/03/030/05/070/TB
GT07/070 GT06/062/064/065/08
GT08 GT00/01/02/020/03/030/05/070/TB
GTTB GT06/062/064/065/08
SERIES
GT Circular connectors with
bayonet coupling
SHELL SIZE & LAYOUT
See pages 50-69.
GT C00 A36-5 P W - 002
CONTACT STYLE/INSERT
C = Crimp
S = Solder
CY = Crimp with Viton
SY = Solder with Viton
CL = Crimp with low smoke/flame
retardant inserts
SL = Solder with low smoke/flame
retardant inserts
SHELL STYLE
00 Wall mount receptacle
01 Inline receptacle
02 Box mount receptacle
020 Box mount receptacle with accessory threads
030 Square flange receptacle - rear panel mount
(Most Popular)
05 Dummy receptacle
06 Straight plug (Most Popular)
062 Straight plug with deep serrated coupling nut*
064 Panel mounted plug with heavy duty coupling nut
065 Straight plug with long heavy duty coupling nut
07 Jam nut receptacle - rear panel mount
070 Jam nut receptacle with accessory threads
08 90˚ angle plug
TB Thru-bulkhead
CONNECTOR SHELL VARIATIONS
Omit for standard olive drab with silver plated contacts
G96 Black anodized
014 Olive drab cadmium plate, nickel base
A24 Gold/nickel plated contacts
023 Electroless nickel (RoHS with Crimp only)
025 Black zinc cobalt (RoHS with Crimp only)
027 Conductive black zinc cobalt
024 Green zinc cobalt
B30 Gold
RDS Radsok power contacts 8, 4 & 0 socket contact only
116 Less pre-tinned solder cups
472 116 & 025 mod codes (RoHS)
548 116 & 023 mod codes (RoHS)
ALTERNATE INSERT ROTATION
“W”, “X”, “Y”, “Z” designates that the insert is
rotated in its shell from a normal position. No
letter required for normal (no rotation) position.
See pages 59-69.
CONTACT STYLE
P designates pin contacts
S designates socket contacts
CONNECTOR CLASS
A General duty, threaded backshell, no cable clamp,
no grommet
AF General duty, threaded backshell, cable clamp, no grommet
F General duty, threaded backshell, cable clamp, with grommet
CF General duty, threaded endbell, gland-seal cable clamp,
no grommet
CFZ General duty, threaded endbell, gland-seal cable clamp,
with grommet
G One-piece, heat shrink endbell adaptor, with grommet
(use with heat shrink boot –
see Accessories, pages 258-260)
G2 Two-piece, heat shrink endbell adaptor, with grommet
(use with heat shrink boot –
see Accessories, pages 258-260)
LC Long threaded backshell, gland-seal cable clamp, with
grommet, and basket-weave cord grip
(please call with cable O.D.)
LCF Long threaded endbell, gland-seal cable clamp, no grommet
LCFZ Long threaded endbell, gland-seal cable clamp, with grommet
R General duty, threaded backshell, no cable clamp,
with grommet
RV General duty, short backshell, with grommet
(may be used with heat shrink boot – see Accessories,
pages 258-260)
CFGG General duty, threaded endbell, gland-seal cable clamp,
no grommet, rubber-covered coupling nut
(shell styles 06 and 08 only)
PP Panel plug, only for shell styles 06 and 064
LT Long back shell for metal core conduit, with grommet
(please call with conduit O.D.)
PFC For plastic, flexible conduit (please call with conduit O.D.)
see pages 262-263.
SL Long backshell for use with PG gland-seal style cord grip
(please call with cable O.D.)
▼
New!
➥
➥
➥
➥
➥
➥
Amphenol How To Order Guide
AIBC/ACA-B Series Connectors
Use the AIB/GT Series part numbering system on
pages 48-49 whenever possible.
☛
SERIES
ACA Circular Connector Family
SHELL STYLES
3100 - Wall mount receptacle with
rear accessory threads for
front mounting through holes
in flange
3101 - Cable connecting receptacle
with rear accessory threads
3102 - Front mount box receptacle
no rear accessory threads
through holes in flange
3103 - Rear mount box receptacle
with rear accessory threads
through holes in flange
3106 - Plug straight
3107A - Jam nut receptacle
rear mount no rear
accessory threads
3108 - Plug with 90 degree endbell
CONNECTOR CLASS
E Environmental with resilient
insulator and endbell with clamp
and bushing
F Environmental with resilient
insulator and endbell with rear
accessory threads
G Two piece backshell for heat
shrink boots
R Environmental with resilient
insulator and shortened
lightweight endbell without
cable clamp
SHELL SIZE
10SL, 14S, 16S, 16, 18, 20, 22, 24,
28, 32, and 36
CONNECTOR MODIFICATION
01 - Metric crimp contacts
116 - Less solder filled contacts
F80 - AWG Crimp contacts
A176 - Gold plated contacts
A23 - Electroless nickel plating shells
A232 - Black zinc cobalt plated shells
F42 - Less grommet, endbell & sleeve (ferrule)
F0 - Less contacts (ordered separately)
RFI - Grounding spring on barrel
(3106 & 3108)
T00 - Metric threaded holes in flange
(3100, 3102, 3103 only)
Consult factory for other modifications
REVERSE BAYONET COUPLING
ALTERNATE POSITION
W, X, Y, and Z
No suffix required for normal position
See pages 59-69 for valid alternate insert
position (rotation)
CONTACT TYPE
P - Pin
S - Socket
CONNECTOR ARRANGEMENT
See pages 50-58 for layouts by number of contacts
ACA 3106 E18 1 S X B - F80
To more easily illustrate ordering procedure,
part number ACA3106E181SXB-F80 is shown as follows:
95
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
▲
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
➥
➥
➥
Mateability with identical contact arrangements
Connector Style Mateable with Style
ACA 3100 ACA3106/ ACA3108
ACA 3101 ACA3106/ ACA3108
ACA 3102 ACA3106/ ACA3108
ACA 3103 ACA3106/ ACA3108
ACA 3105 ACA3106/ ACA3108
ACA 3106 ACA3101/ ACA3102/ ACA3103
ACA 3108 ACA3101/ ACA3102/ ACA3103
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/ACA-B Series
96
▲
For price & delivery: 800-642-8750 • For tech support: 800-523-0727 • www.PeiGenesis.com Specifications subject to change.
Connector Tools
TG70 Strap Wrench
The strap wrench is
used to connect or
disconnect coupling nuts
in a confined space, or to
tighten or loosen endbells
without damaging the
connector plating. A strap
wrench also increases torque, allowing you to more
easily mate or unmate a connector pair. Substitute
tools, such as a pipe wrench or pliers, should never be
used because of the high probability of severe damage
to the connector plating or the coupling mechanism.
TG69P Non-Marring Adjustable
Endbell Pliers For Field Service
The TG69P pliers have
resilient jaws and are
used to tighten or
remove endbells without
damaging the connector
plating. The pliers are
adjustable and will
accommodate all of the connector sizes in this catalog.
Substitute tools, such as a pipe wrench or metal jaw
pliers, should never be used due to the high probability
of severe damage to the connector plating.
Replacement jaws, Part No. G77015, are available.
Bench mounted
Torque wrench
600-007
Hand held
Torque
wrench
600-004
600D005-R 600D005-P
600B005-R 600B005-P
600 Series Production System
The 600 Series is a complete system for the proper assembly and torquing of connector endbells. The System
includes a bench mounted or hand-held torque wrench, plug and receptacle holders, and a range of endbell
tightening tools. When used together, these tools provide the user with consistent endbell installations.
Each item is shipped with detailed assembly instructions.
MIL-DTL-5015 MIL-DTL-26482
FOR AIT/MS, AIB/GT, P-lok FOR PT, PT-SE, MS311_, MS312_
SIZE RECEPTACLES PLUGS RECEPTACLES PLUGS
8/8S 600B005-8R 600B005-8P 600D005-8R 600D005-8P
10S/SL 600B005-10R 600B005-10P 600D005-10R 600D005-10P
12/12S 600B005-12R 600B005-12P 600D005-12R 600D005-12P
14/14S 600B005-14R 600B005-14P 600D005-14R 600D005-14P
16/16S 600B005-16R 600B005-16P 600D005-16R 600D005-16P
18 600B005-18R 600B005-18P 600D005-18R 600D005-18P
20 600B005-20R 600B005-20P 600D005-20R 600D005-20P
22 600B005-22R 600B005-22P 600D005-22R 600D005-22P
24 600B005-24R 600B005-24P 600D005-24R 600D005-24P
28 600B005-28R 600B005-28P - -
32 600B005-32R 600B005-32P - -
36 600B005-36R 600B005-36P - -
Torque Values
Important Note:
If Barrel/Shell have
three threads or less,
torque to 30 to 35
inch - Lbs (3.4 to 4.0 NM)
per L-725-2.
10SL 26
14S 44
16 50
16S 50
18 55
20 65
22 85
24 90
28 114
32 120
36 153
40 170
SIZE IN./LB. MAX.
Plug and Receptacle Holders
AIB/AIBC Amphenol Industrial Bayonet/GT/AC-B Series
AIB/AIBC Amphenol Industrial Bayonet/GT/AC-B Series
