SPEC NO: KDA0088 REV NO: V.1 DATE: SEP/07/2001 PAGE: 1 OF 4
APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN
Description
The Super Bright Yellow source color devices are made
with DH InGaAlP on GaAs substrate Light Emitting
Diode.
2.0x1.2mm SMD CHIP LED LAMP
KP-2012SYC SUPER BRIGHT YELLOW
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
Features
!2.0mmx1.2mm SMT LED,1.1mm THICKNESS.
!LOW POWER CONSUMPTION.
!WIDE VIEWING ANGLE.
!IDEAL FOR BACKLIGHT AND INDICATOR.
!VARIOUS COLORS AND LENS TYPES AVAILABLE.
!PACKAGE : 2000PCS / REEL.
Package Dimensions
SPEC NO: KDA0088 REV NO: V.1 DATE: SEP/07/2001 PAGE: 2 OF 4
APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN
Electrical / Optical Characteristics at T)=25°°
°°
°C
Absolute Maximum Ratings at T)=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL
)dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI
Am02@
gniweiVgniweiV gniweiV gniweiVgniweiV
elgnA
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT 2/1θ22/1θ2 2/1θ2 2/1θ22/1θ2
CYS2102-PK)PlAaGnI(WOLLEYTHGIRBREPUSRAELCRETAW0408°021
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePwolleYthgirBrepuS095mnAm02=FI
λDhtgnelevaWetanimoDwolleYthgirBrepuS885mnAm02=FI
λ∆ 2/1 htdiwflaHeniLlartcepSwolleYthgirBrepuS82mnAm02=FI
CecnaticapaCwolleYthgirBrepuS52FpzHM1=f;V0=FV
V
F
egatloVdrawroFwolleYthgirBrepuS0.25.2V Am02=FI
I
R
tnerruCesreveRwolleYthgirBrepuS01AuV5=RV
retemaraPretemaraP retemaraP retemaraPretemaraP wolleYthgirBrepuSwolleYthgirBrepuS wolleYthgirBrepuS wolleYthgirBrepuSwolleYthgirBrepuSstinUstinU stinU stinUstinU
noitapissidrewoP 521Wm
tnerruCdrawroFCD 03Am
]1[tnerruCdrawroFkaeP 571Am
egatloVesreveR 5V
erutarepmeTgnitarepO 04- °58+oTC °C
erutarepmeTegarotS 04- °58+oTC °C
SPEC NO: KDA0088 REV NO: V.1 DATE: SEP/07/2001 PAGE: 3 OF 4
APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN
Super Bright Yellow KP-2012SYC
SPEC NO: KDA0088 REV NO: V.1 DATE: SEP/07/2001 PAGE: 4 OF 4
APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
KP-2012SYC
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
