19-1659; Rev 1; 4/01 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References Applications Analog-to-Digital Converters (ADCs) Portable Battery-Powered Systems Notebook Computers PDAs, GPSs, DMMs Cellular Phones Precision 3V/5V Systems Typical Operating Circuit appears at end of data sheet. Selector Guide Features Ultra-Small 3-Pin SOT23 Package 0.2% (max) Initial Accuracy 20ppm/C (max) Temperature Coefficient 5mA Source Current 2mA Sink Current No Output Capacitor Required Stable with Capacitive Loads 90A (typ) Quiescent Supply Current 200mV (max) Dropout at 1mA Load Current Output Voltage Options: 1.25V, 1.8V, 2.048V, 2.5V, 3V, 4.096V, 4.5V, 5V 13Vp-p Noise 0.1Hz to 10Hz (MAX6061) Ordering Information TEMP. RANGE PINPACKAGE TOP MARK MAX6061AEUR-T -40C to +85C 3 SOT23-3 FZFP MAX6061BEUR-T -40C to +85C MAX6062AEUR-T -40C to +85C MAX6062BEUR-T -40C to +85C 3 SOT23-3 3 SOT23-3 3 SOT23-3 FZFQ FZFY FZFZ MAX6063AEUR-T -40C to +85C MAX6063BEUR-T -40C to +85C MAX6064AEUR-T -40C to +85C MAX6064BEUR-T -40C to +85C MAX6065AEUR-T -40C to +85C MAX6065BEUR-T -40C to +85C MAX6066AEUR-T -40C to +85C MAX6066BEUR-T -40C to +85C 3 SOT23-3 3 SOT23-3 3 SOT23-3 3 SOT23-3 3 SOT23-3 3 SOT23-3 3 SOT23-3 3 SOT23-3 FZFV FZFW FZGB FZGC FZGE FZGF FZFM FZFN PART Note: There is a minimum order increment of 2500 pieces for SOT23 packages. Ordering Information continued at end of data sheet. Pin Configuration PART OUTPUT VOLTAGE (V) INPUT VOLTAGE (V) MAX6061 1.248 2.5 to 12.6 MAX6068 1.800 2.5 to 12.6 MAX6062 2.048 2.5 to 12.6 MAX6066 2.500 (VOUT + 200mV) to 12.6 MAX6063 3.000 (VOUT + 200mV) to 12.6 MAX6064 4.096 (VOUT + 200mV) to 12.6 MAX6067 4.500 (VOUT + 200mV) to 12.6 MAX6065 5.000 (VOUT + 200mV) to 12.6 TOP VIEW IN 1 MAX6061- MAX6068 3 GND OUT 2 SOT23-3 ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX6061-MAX6068 General Description The MAX6061-MAX6068 are precision, low-dropout, micropower voltage references. These three-terminal devices are available with output voltage options of 1.25V, 1.8V, 2.048V, 2.5V, 3V, 4.096V, 4.5V, and 5V. They feature a proprietary curvature-correction circuit and laser-trimmed thin-film resistors that result in a very low temperature coefficient of 20ppm/C (max) and an initial accuracy of 0.2% (max). Specifications apply to the extended temperature range (-40C to +85C). The MAX6061-MAX6068 typically draw only 90A of supply current and can source 5mA or sink 2mA of load current. Unlike conventional shunt-mode (two-terminal) references that waste supply current and require an external resistor, these devices offer a supply current that is virtually independent of the supply voltage (8A/V variation) and do not require an external resistor. Additionally, the internally compensated devices do not require an external compensation capacitor. Eliminating the external compensation capacitor saves valuable board area in space-critical applications. Low dropout voltage and supply independent, ultra-low supply current make these devices ideal for battery-operated, high-performance, low-voltage systems. The MAX6061-MAX6068 are available in a 3-pin SOT23 package. MAX6061-MAX6068 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References ABSOLUTE MAXIMUM RATINGS Continuous Power Dissipation (TA = +70C) 3-Pin SOT23 (derate 4.0mW/C above +70C)............320mW Operating Temperature Range ...........................-40C to +85C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C (Voltages Referenced to GND) IN .........................................................................-0.3V to +13.5V OUT .............................................................-0.3V to (VIN + 0.3V) Output Short-Circuit Duration to GND or IN (VIN < 6V) ...Continuous Output Short-Circuit Duration to GND or IN (VIN 6V)................60s Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS--MAX6061, VOUT = 1.25V (VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Voltage SYMBOL VOUT Output Voltage Temperature Coefficient (Note 2) TCVOUT Line Regulation VOUT/ VIN Load Regulation VOUT/ IOUT OUT Short-Circuit Current ISC Long-Term Stability VOUT/ time Output Voltage Hysteresis (Note 3) VOUT/ cycle CONDITIONS MIN TYP MAX6061A (0.32%) 1.244 1.248 1.252 MAX6061B (0.48%) 1.242 1.248 1.254 MAX6061A 6 20 MAX6061B 6 30 10 90 TA = +25C 2.5V VIN 12.6V MAX Sourcing: 0 IOUT 5mA 0.5 0.9 Sinking: -2mA IOUT 0 1.3 3.0 UNITS V ppm/C V/V mV/mA Short to GND 25 Short to IN 25 1000hr at +25C 62 ppm/ 1000hr 130 ppm f = 0.1Hz to 10Hz 13 Vp-p f = 10Hz to 10kHz 15 VRMS VIN = 5V 100mV, f = 120Hz 86 dB To VOUT = 0.1% of final value, COUT = 50pF 50 s mA DYNAMIC CHARACTERISTICS Noise Voltage Ripple Rejection Turn-On Settling Time eOUT VOUT/ VIN tR INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Supply Current IIN Change in Supply Current IIN/ VIN 2 Guaranteed by line regulation test 2.5V VIN 12.6V 2.5 12.6 V 90 125 A 3.4 8.0 A/V _______________________________________________________________________________________ Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References (VIN = +5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Voltage SYMBOL MIN TYP MAX MAX6068A (0.17%) 1.797 1.800 1.803 MAX6068B (0.39%) 1.793 1.800 1.807 MAX6068A 6 20 MAX6068B 6 30 33 200 Sourcing: 0 IOUT 5mA 0.5 0.9 Sinking: -2mA IOUT 0 1.5 4 Short to GND 25 Short to IN 25 1000hr at +25C 62 ppm/ 1000hr 130 ppm f = 0.1Hz to 10Hz 22 Vp-p f = 10Hz to 10kHz 25 VRMS VIN = 5V 100mV, f = 120Hz 86 dB tR To VOUT = 0.1% of final value, COUT = 50pF 115 s VIN Guaranteed by line regulation test VOUT Output Voltage Temperature Coefficient (Note 2) TCVOUT Line Regulation VOUT/ VIN Load Regulation VOUT/ IOUT OUT Short-Circuit Current ISC Long-Term Stability VOUT/ time Output Voltage Hysteresis (Note 3) VOUT/ cycle CONDITIONS TA = +25C 2.5V VIN 12.6V UNITS V ppm/C V/V mV/mA mA DYNAMIC CHARACTERISTICS Noise Voltage eOUT VOUT/ VIN Ripple Rejection Turn-On Settling Time INPUT CHARACTERISTICS Supply Voltage Range Quiescent Supply Current IIN Change in Supply Current IIN/ VIN 2.5V VIN 12.6V 2.5 12.6 V 90 125 A 3.3 8.0 A/V _______________________________________________________________________________________ 3 MAX6061-MAX6068 ELECTRICAL CHARACTERISTICS--MAX6068, VOUT = 1.80V MAX6061-MAX6068 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References ELECTRICAL CHARACTERISTICS--MAX6062, VOUT = 2.048V (VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Voltage SYMBOL VOUT Output Voltage Temperature Coefficient (Note 2) TCVOUT Line Regulation VOUT/ VIN Load Regulation VOUT/ IOUT OUT Short-Circuit Current ISC Long-Term Stability VOUT/ time Output Voltage Hysteresis (Note 3) VOUT/ cycle CONDITIONS MIN TYP MAX MAX6062A (0.24%) 2.043 2.048 2.053 MAX6062B (0.39%) 2.040 2.048 2.056 MAX6062A 6 20 MAX6062B 6 30 2.5V VIN 12.6V 33 200 TA = +25C Sourcing: 0 IOUT 5mA 0.5 0.9 Sinking: -2mA IOUT 0 1.5 4 UNITS V ppm/C V/V mV/mA Short to GND 25 Short to IN 25 1000hr at +25C 62 ppm/ 1000hr 130 ppm f = 0.1Hz to 10Hz 22 Vp-p f = 10Hz to 10kHz 25 VRMS VIN = 5V 100mV, f = 120Hz 86 dB To VOUT = 0.1% of final value, COUT = 50pF 115 s mA DYNAMIC CHARACTERISTICS Noise Voltage Ripple Rejection Turn-On Settling Time eOUT VOUT/ VIN tR INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Supply Current IIN Change in Supply Current IIN/VIN 4 Guaranteed by line-regulation test 2.5V VIN 12.6V 2.5 12.6 V 90 125 A 3.3 8.0 A/V _______________________________________________________________________________________ Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References (VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Voltage SYMBOL VOUT Output Voltage Temperature Coefficient (Note 2) TCVOUT Line Regulation VOUT/ VIN Load Regulation VOUT/ IOUT Dropout Voltage (Note 4) VIN VOUT OUT Short-Circuit Current ISC Long-Term Stability VOUT/ time Output Voltage Hysteresis (Note 3) VOUT/ cycle CONDITIONS MIN TYP MAX MAX6066A (0.2%) 2.495 2.500 2.505 MAX6066B (0.4%) 2.490 2.500 2.510 MAX6066A 6 20 MAX6066B 6 30 (VOUT + 0.2V) VIN 12.6V 60 300 Sourcing: 0 IOUT 5mA 0.5 0.9 Sinking: -2mA IOUT 0 1.6 5 IOUT = 1mA 50 200 Short to GND 25 Short to IN 25 1000hr at +25C 62 ppm/ 1000hr 130 ppm f = 0.1Hz to 10Hz 27 Vp-p f = 10Hz to 10kHz 30 VRMS VIN = 5V 100mV, f = 120Hz 86 dB To VOUT = 0.1% of final value, COUT = 50pF 115 s TA = +25C UNITS V ppm/C V/V mV/mA mV mA DYNAMIC CHARACTERISTICS Noise Voltage eOUT VOUT/ VIN Ripple Rejection Turn-On Settling Time tR INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Supply Current IIN Change in Supply Current IIN/VIN Guaranteed by line-regulation test (VOUT + 0.2V) VIN 12.6V VOUT + 0.2 12.6 V 90 125 A 3.3 8.0 A/V _______________________________________________________________________________________ 5 MAX6061-MAX6068 ELECTRICAL CHARACTERISTICS--MAX6066, VOUT = 2.500V MAX6061-MAX6068 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References ELECTRICAL CHARACTERISTICS--MAX6063, VOUT = 3.0V (VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Voltage Output Voltage SYMBOL VOUT Output Voltage Temperature Coefficient (Note 2) TCVOUT Line Regulation VOUT/ VIN Load Regulation VOUT/ IOUT Dropout Voltage (Note 4) VIN VOUT OUT Short-Circuit Current ISC Long-Term Stability VOUT/ time Output Voltage Hysteresis (Note 3) VOUT/ cycle CONDITIONS MIN TYP MAX MAX6063A (0.2%) 2.994 3.000 3.006 MAX6063B (0.4%) 2.988 3.000 3.012 MAX6063A 6 20 MAX6063B 6 30 (VOUT + 0.2V) VIN 12.6V 90 400 Sourcing: 0 IOUT 5mA 0.5 0.9 Sinking: -2mA IOUT 0 2.0 6.0 IOUT = 1mA 50 200 Short to GND 25 Short to IN 25 1000hr at +25C 62 ppm/ 1000hr 130 ppm TA = +25C UNITS V ppm/C V/V mV/mA mV mA DYNAMIC CHARACTERISTICS Noise Voltage Ripple Rejection Turn-On Settling Time eOUT VOUT/ VIN tR f = 0.1Hz to 10Hz 35 Vp-p f = 10Hz to 10kHz 40 VRMS VIN = 5V 100mV, f = 120Hz 76 dB To VOUT = 0.1% of final value, COUT = 50pF 115 s INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Supply Current IIN Change in Supply Current IIN/VIN 6 Guaranteed by line-regulation test (VOUT + 0.2V) VIN 12.6V VOUT + 0.2 12.6 V 90 125 A 3.4 8.0 A/V _______________________________________________________________________________________ Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References (VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Voltage SYMBOL VOUT Output Voltage Temperature Coefficient (Note 2) TCVOUT Line Regulation VOUT/ VIN Load Regulation VOUT/ IOUT Dropout Voltage (Note 4) VIN VOUT OUT Short-Circuit Current ISC Long-Term Stability VOUT/ time Output Voltage Hysteresis (Note 3) VOUT/ cycle CONDITIONS MIN TYP MAX MAX6064A (0.2%) 4.088 4.096 4.104 MAX6064B (0.4%) 4.080 4.096 4.112 MAX6064A 6 20 MAX6064B 6 30 (VOUT + 0.2V) VIN 12.6V 130 430 Sourcing: 0 IOUT 5mA 0.5 0.9 Sinking: -2mA IOUT 0 2.2 8 IOUT = 1mA 50 200 Short to GND 25 Short to IN 25 1000hr at +25C 62 ppm/ 1000hr 130 ppm TA = +25C UNITS V ppm/C V/V mV/mA mV mA DYNAMIC CHARACTERISTICS Noise Voltage eOUT VOUT/ VIN Ripple Rejection Turn-On Settling Time tR f = 0.1Hz to 10Hz 50 Vp-p f = 10Hz to 10kHz 50 VRMS VIN = 5V 100mV, f = 120Hz 72 dB To VOUT = 0.1% of final value, COUT = 50pF 190 s INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Supply Current IIN Change in Supply Current IIN/VIN Guaranteed by line-regulation test (VOUT + 0.2V) VIN 12.6V VOUT + 0.2 12.6 V 90 125 A 3.2 8.0 A/V _______________________________________________________________________________________ 7 MAX6061-MAX6068 ELECTRICAL CHARACTERISTICS--MAX6064, VOUT = 4.096V MAX6061-MAX6068 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References ELECTRICAL CHARACTERISTICS--MAX6067, VOUT = 4.500V (VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Voltage SYMBOL VOUT Output Voltage Temperature Coefficient (Note 2) TCVOUT Line Regulation VOUT/ VIN Load Regulation VOUT/ IOUT Dropout Voltage (Note 4) VIN VOUT OUT Short-Circuit Current ISC Long-Term Stability VOUT/ time Output Voltage Hysteresis (Note 3) VOUT/ cycle CONDITIONS MIN TYP MAX MAX6067A (0.2%) 4.491 4.500 4.509 MAX6067B (0.4%) 4.482 4.500 4.518 MAX6067A 6 20 MAX6067B 6 30 (VOUT + 0.2V) VIN 12.6V 170 550 TA = +25C UNITS V ppm/C V/V Sourcing: 0 IOUT 5mA 0.5 0.9 Sinking: -2mA IOUT 0 2.4 8 IOUT = 1mA 50 200 Short to GND 25 Short to IN 25 1000hr at +25C 62 ppm/ 1000hr 130 ppm f = 0.1Hz to 10Hz 55 Vp-p f = 10Hz to 10kHz 55 VRMS VIN = 5V 100mV, f = 120Hz 70 dB To VOUT = 0.1% of final value, COUT = 50pF 230 s mV/mA mV mA DYNAMIC CHARACTERISTICS Noise Voltage Ripple Rejection Turn-On Settling Time eOUT VOUT/ VIN tR INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Supply Current IIN Change in Supply Current IIN/VIN 8 Guaranteed by line-regulation test (VOUT + 0.2V) VIN 12.6V VOUT + 0.2 12.6 V 90 125 A 3.2 8.0 A/V _______________________________________________________________________________________ Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References (VIN = +5.2V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Output Voltage SYMBOL VOUT Output Voltage Temperature Coefficient (Note 2) TCVOUT Line Regulation VOUT/ VIN Load Regulation VOUT/ IOUT Dropout Voltage (Note 4) VIN VOUT OUT Short-Circuit Current ISC Long-Term Stability VOUT/ time Output Voltage Hysteresis (Note 3) VOUT/ cycle CONDITIONS MIN TYP MAX MAX6065A (0.2%) 4.990 5.000 5.010 MAX6065B (0.4%) 4.980 5.000 5.020 MAX6065A 6 20 MAX6065B 6 30 (VOUT + 0.2V) VIN 12.6V 180 550 Sourcing: 0 IOUT 5mA 0.5 0.9 Sinking: -2mA IOUT 0 2.4 8.0 IOUT = 1mA 50 200 TA = +25C UNITS V ppm/C V/V mV/mA mV Short to GND 25 Short to IN 25 1000hr at +25C 62 ppm/ 1000hr 130 ppm mA DYNAMIC CHARACTERISTICS Noise Voltage eOUT VOUT/ VIN Ripple Rejection Turn-On Settling Time tR f = 0.1Hz to 10Hz 60 Vp-p f = 10Hz to 10kHz 60 VRMS VIN = 5V 100mV, f = 120Hz 65 dB To VOUT = 0.1% of final value, COUT = 50pF 300 s INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Supply Current IIN Change in Supply Current IIN/VIN Note 1: Note 2: Note 3: Note 4: Guaranteed by line-regulation test (VOUT + 0.2V) VIN 12.6V VOUT + 0.2 12.6 V 90 125 A 3.2 8.0 A/V All devices are 100% production tested at TA = +25C and are guaranteed by design for TA = TMIN to TMAX, as specified. Temperature Coefficient is measured by the "box" method, i.e., the maximum VOUT is divided by the maximum T. Temperature Hysteresis is defined as the change in +25C output voltage before and after cycling the device from TMIN to TMAX. Dropout voltage is the minimum input voltage at which VOUT changes 0.2% from VOUT at VIN = 5.0V (VIN = 5.5V for MAX6065). _______________________________________________________________________________________ 9 MAX6061-MAX6068 ELECTRICAL CHARACTERISTICS--MAX6065, VOUT = 5.000V Typical Operating Characteristics (VIN = +5V for MAX6061-MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25C, unless otherwise noted.) (Note 5) OUTPUT VOLTAGE (V) 5.002 2.049 2.048 2.047 5.001 5.000 4.999 2.046 -15 10 35 60 -200 -15 10 35 60 2 85 4 6 8 10 MAX6065 LINE REGULATION MAX6061 LOAD REGULATION MAX6065 LOAD REGULATION TA = +25C -800 -1000 TA = +85C 3 2 1 TA = -40C 0 TA = +25C -1 12 9 11 13 8 6 4 TA = +25C 2 0 -2 -4 -3 7 TA = +85C 10 -2 -1200 -4 -2 0 2 12 MAX6061/68 toc06 4 OUTPUT VOLTAGE CHANGE (mV) TA = +85C 5 MAX6061/68 toc05 MAX6061/68 toc04 TA = -40C TA = -40C -6 4 -6 -4 -2 0 2 4 6 INPUT VOLTAGE (V) LOAD CURRENT (mA) LOAD CURRENT (mA) MAX6066 DROPOUT VOLTAGE vs. LOAD CURRENT MAX6065 DROPOUT VOLTAGE vs. LOAD CURRENT MAX6061 POWER-SUPPLY REJECTION RATIO vs. FREQUENCY 0.20 TA = +25C 0.15 0.10 TA = -40C -20 -30 0.15 TA = +25C TA = -40C 0.10 -40 -50 -60 -70 0.05 0.05 MAX6061/68 toc09 MAX6061/68 toc08 TA = +85C 0.20 0 -10 PSRR (dB) TA = +85C 0.25 DROPOUT VOLTAGE (V) MAX6061/68 toc07 0.30 0.25 -100 TEMPERATURE (C) -200 5 TA = +85C TA = -40C 0 TEMPERATURE (C) 0 -600 100 INPUT VOLTAGE (V) 200 -400 -40 85 TA = +25C 200 -300 4.998 -40 -80 0 0 0 1 2 3 LOAD CURRENT (mA) 10 300 OUTPUT VOLTAGE CHANGE (V) THREE TYPICAL PARTS OUTPUT VOLTAGE CHANGE (mV) OUTPUT VOLTAGE (V) 2.050 MAX6061/68 toc02 THREE TYPICAL PARTS OUTPUT VOLTAGE CHANGE (V) 5.003 MAX6061/68 toc01 2.051 MAX6061 LINE REGULATION MAX6065 OUTPUT VOLTAGE TEMPERATURE DRIFT MAX6061/68 toc03 MAX6062 OUTPUT VOLTAGE TEMPERATURE DRIFT DROPOUT VOLTAGE (V) MAX6061-MAX6068 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References 4 5 -90 0 1 2 3 LOAD CURRENT (mA) 4 5 0.001 0.01 0.1 1 10 FREQUENCY (kHz) ______________________________________________________________________________________ 100 1000 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References -30 -40 -50 90 80 -60 105 100 95 90 85 -70 80 70 -80 0.1 10 6 8 10 5 12 7 9 11 INPUT VOLTAGE (V) INPUT VOLTAGE (V) MAX6061 SUPPLY CURRENT vs. TEMPERATURE MAX6065 SUPPLY CURRENT vs. TEMPERATURE MAX6061 OUTPUT IMPEDANCE vs. FREQUENCY VIN = 7.5V 90 VIN = 5.5V VIN = 12.5V 105 VIN = 7.5V 95 VIN = 5.5V 13 MAX6061/68 toc15 220 200 180 OUTPUT IMPEDANCE () SUPPLY CURRENT (A) 110 VIN = 2.5V 115 MAX6061/68 toc13 VIN = 12.5V 80 4 FREQUENCY (kHz) 120 100 2 1000 MAX6061/68 toc14 0.001 SUPPLY CURRENT (A) MAX6061/68 toc12 100 110 SUPPLY CURRENT (A) PSRR (dB) -20 115 MAX6061/68 toc11 -10 110 SUPPLY CURRENT (A) MAX6061/68 toc10 0 MAX6065 SUPPLY CURRENT vs. INPUT VOLTAGE MAX6061 SUPPLY CURRENT vs. INPUT VOLTAGE MAX6065 POWER-SUPPLY REJECTION RATIO vs. FREQUENCY 160 140 120 100 80 60 40 20 85 70 -15 10 35 60 0 -40 -15 10 35 60 85 0.001 0.1 10 TEMPERATURE (C) TEMPERATURE (C) FREQUENCY (kHz) MAX6065 OUTPUT IMPEDANCE vs. FREQUENCY MAX6061 0.1Hz TO 10Hz OUTPUT NOISE MAX6065 NOISE 160 140 MAX6061/68 toc17 MAX6061/68 toc16 180 OUTPUT IMPEDANCE () 85 1000 MAX6061/68 toc18 -40 120 100 VOUT 10V/div VOUT 10V/div 80 60 40 20 0 0.001 0.1 10 1000 1s/div 1s/div FREQUENCY (kHz) ______________________________________________________________________________________ 11 MAX6061-MAX6068 Typical Operating Characteristics (continued) (VIN = +5V for MAX6061-MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25C, unless otherwise noted.) (Note 5) Typical Operating Characteristics (continued) (VIN = +5V for MAX6061-MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25C, unless otherwise noted.) (Note 5) VOUT 500mV/div MAX6061/68 toc20 MAX6065 TURN-ON TRANSIENT (CL = 50pF) MAX6061 TURN-ON TRANSIENT (CL = 50pF) MAX6061/68 toc19 MAX6061-MAX6068 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References VOUT 2V/div VIN 5V/div VIN 5V/div 10s/div 40s/div MAX6061 LOAD TRANSIENT (IOUT = 250A, VIN = 5.0, CL = 0) MAX6065 LOAD TRANSIENT (IOUT = 250A, CL = 0, VIN = 5.5V) MAX6061/68 toc21 MAX6061/68 toc22 IOUT +250A IOUT -250A IOUT 500A/div VOUT AC-COUPLED 100mV/div +250A IOUT 500A/div -250A VOUT AC-COUPLED 50mV/div 400s/div 400s/div MAX6061 LOAD TRANSIENT (IOUT = 250A, VIN = 5.0V, CL = 1F) MAX6065 LOAD TRANSIENT (IOUT = 250A, CL = 1F, VIN = 5.5V) MAX6061/68 toc24 MAX6061/68 toc23 +250A IOUT 500A/div -250A -250A VOUT AC-COUPLED 20mV/div VOUT AC-COUPLED 10mV/div 400s/div 12 +250A IOUT 500A/div 400s/div ______________________________________________________________________________________ Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References MAX6061 LOAD TRANSIENT (VIN = 5.0V, CL = 0, IOUT = 2mA) MAX6065 LOAD TRANSIENT (CL = 0, IOUT = 2mA, VIN = 5.5V) MAX6061/68 toc25 MAX6061/68 toc26 +2mA IOUT 5mA/div -2mA VOUT AC-COUPLED 100mV/div +2mA IOUT 5mA/div -2mA VOUT AC-COUPLED 50mV/div 400s/div 400s/div MAX6061 LOAD TRANSIENT (VIN = 5.0V, CL = 1F, IOUT = 2mA) MAX6065 LOAD TRANSIENT (CL = 1F, IOUT = 2mA, VIN = 5.5V) MAX6061/68 toc28 MAX6061/68 toc27 +2mA +2mA IOUT 5mA/div -2mA VOUT AC-COUPLED 50mV/div IOUT 5mA/div -2mA VOUT AC-COUPLED 20mV/div 400s/div 400s/div MAX6061 LOAD TRANSIENT (VIN = 5.0V, CL = 0, IOUT = 4mA) MAX6065 LOAD TRANSIENT (IOUT = 5mA, CL = 0, VIN = 5.5V) MAX6061/68 toc29 MAX6061/68 toc30 +5mA +4mA IOUT 5mA/div -4mA IOUT 5mA/div -5mA VOUT AC-COUPLED 100mV/div VOUT AC-COUPLED 200mV/div 400s/div 400s/div ______________________________________________________________________________________ 13 MAX6061-MAX6068 Typical Operating Characteristics (continued) (VIN = +5V for MAX6061-MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25C, unless otherwise noted.) (Note 5) MAX6061-MAX6068 Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References Typical Operating Characteristics (continued) (VIN = +5V for MAX6061-MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25C, unless otherwise noted.) (Note 5) MAX6061 LOAD TRANSIENT (VIN = 5.0V, CL = 1F, IOUT = 4mA) MAX6065 LOAD TRANSIENT (IOUT = 5mA, CL = 1F, VIN = 5.5V) MAX6061/68 toc31 MAX6061/68 toc32 +4mA IOUT 5mA/div +5mA IOUT 5mA/div -4mA VOUT AC-COUPLED 50mV/div -5mA VOUT AC-COUPLED 50mV/div 400s/div 400s/div MAX6061 LINE TRANSIENT (CL = 0) MAX6065 LINE TRANSIENT (CL = 0) MAX6061/68 toc33 MAX6061/68 toc34 +0.25 VIN 500mV/div -0.25 VOUT AC-COUPLED 20mV/div +0.25 VIN 500mV/div -0.25 VOUT AC-COUPLED 20mV/div 40s/div 40s/div Note 5: Many of the MAX6061 family Typical Operating Characteristics are extremely similar. The extremes of these characteristics are found in the MAX6061 (1.25V output) and the MAX6065 (5.0V output). The Typical Operating Characteristics of the remainder of the MAX6061 family, typically lie between these two extremes and can be estimated based on their output voltages. 14 ______________________________________________________________________________________ Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References PIN NAME 1 IN 2 OUT Reference Output 3 GND Ground Typical Operating Circuit FUNCTION +SUPPLY INPUT (SEE SELECTOR GUIDE) Input Voltage IN OUT REFERENCE OUT MAX6061MAX6068 * Applications Information Input Bypassing For the best line-transient performance, decouple the input with a 0.1F ceramic capacitor as shown in the Typical Operating Circuit. Locate the capacitor as close to IN as possible. Where transient performance is less important, no capacitor is necessary. Output/Load Capacitance Devices in the MAX6061 family do not require an output capacitance for frequency stability. In applications where the load or the supply can experience step changes, an output capacitor of at least 0.1F will reduce the amount of overshoot (undershoot) and improve the circuit's transient response. Many applications do not require an external capacitor, and the MAX6061 family can offer a significant advantage in these applications when board space is critical. Supply Current The quiescent supply current of the series-mode MAX6061 family is typically 90A and is virtually independent of the supply voltage, with only an 8A/V (max) variation with supply voltage. Unlike series references, shunt-mode references operate with a series resistor connected to the power supply. The quiescent current of a shunt-mode reference is thus a function of the input voltage. Additionally, shunt-mode references have to be biased at the maximum expected load current, even if the load current is not present at the time. In the MAX6061 family, the load current is drawn from the input voltage only when required, so supply current is not wasted and efficiency is maximized at all input voltages. This improved efficiency reduces power dissipation and extends battery life. When the supply voltage is below the minimum specified input voltage (as during turn-on), the devices can draw up to 400A beyond the nominal supply current. The input voltage source must be capable of providing this current to ensure reliable turn-on. GND 1F * *CAPACITORS ARE OPTIONAL. Ordering Information (continued) PART TEMP. RANGE PINPACKAGE TOP MARK MAX6067AEUR-T MAX6067BEUR-T MAX6068AEUR-T MAX6068BEUR-T -40C to +85C -40C to +85C -40C to +85C -40C to +85C 3 SOT23-3 3 SOT23-3 3 SOT23-3 3 SOT23-3 FZFS FZFT FZIB FZIC Output Voltage Hysteresis Output voltage hysteresis is the change of output voltage at TA = +25C before and after the device is cycled over its entire operating temperature range. Hysteresis is caused by differential package stress appearing across the bandgap core transistors. The typical temperature hysteresis value is 130ppm. Turn-On Time These devices typically turn on and settle to within 0.1% of their final value in 50s to 300s, depending on the device. The turn-on time can increase up to 1.5ms with the device operating at the minimum dropout voltage and the maximum load. Chip Information TRANSISTOR COUNT: 117 PROCESS: BiCMOS ______________________________________________________________________________________ 15 MAX6061-MAX6068 Pin Description Precision, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References SOTPO3L.EPS MAX6061-MAX6068 Package Information Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 16 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2001 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.