MICRO SWITCH™ Sealed
Subminiature Basic Switches
ZW Series
Datasheet
2sensing.honeywell.com
What makes our switches better?
The IP67-rated sealed switch is designed to operate in a
variety of demanding applications, reducing the challenge of
harsh environments
Wide variety of electrical current carrying capacity allows for
a solution in many systems
Switch package designed to accommodate a wide range of
temperature requirements
MICRO SWITCH™ ZW Series
Sealed Subminiature Basic Switches
Honeywell’s MICRO SWITCH™ ZW Series is a sealed subminiature snap action switch from the Honeywell family of
Z Series subminiature basic switches. Although small in size, the ZW Series is rated for controlling electrical loads
ranging from logic level/computer-based circuits to power-duty switching (up to 6 amps and up to 250 Vac).
Switches supplied with integral wire leads are sealed to IP67 and are suitable for applications where a switch
assembly would be exposed to liquids or particulate contaminates in the environment from indoor or outdoor use.
A wide variety of stainless steel levers are available and when combined with the subminiature package size,
can adapt the switch for many different applications. The ZW Series is certied to UL, cUL, ENEC, and CQC for
worldwide use.
RIGHT SWITCH FOR THE RIGHT APPLICATION
HARSH ENVIRONMENTS • RELIABILITY • ELECTRICAL RATING
For worldwide use...
3
sensing.honeywell.com
Features
and Benefits
Features
and Benefits
SMALL PACKAGE SIZE
Subminiature package size allows the MICRO SWITCH™ ZW Series switch to
fit in many applications where other sensors or switches are too large.
WELL SUITED FOR POWER-DUTY AND LOGIC-LEVEL LOADS
SPDT, SPNC, or SPNO switch options are available and designed to meet various
circuit requirements. ZW Series can control power-duty switching with silver
contacts or logic-level computer-based circuits with gold-plated contacts.
PERFORMS IN WET, DIRTY, AND DUSTY ENVIRONMENTS
Catalog listings with integral lead wires are sealed to IP67 for use in
environments where exposure to liquid ingress or particulate contaminant
could occur.
DESIGN FLEXIBILITY
Switches are built with an integral sealed pin plunger. Various styles of levers
expand the versatility of the ZW Series switch in the application. In addition,
the ZW Series features a variety of terminations to promote flexibility for the
electrical connectivity.
IP67 sealing: pre-wired switches
LAWN TRACTORS
Reverse alarm for lawn tractors
Indicates seat use on lawn tractors
WATERCRAFT
Found on handle-bar controls for personal watercraft (wave runners)
SECURITY SYSTEMS
Acts as an interlock for security system panel
SNOWMOBILES
Found on handle-bar controls for snowmobiles
Potential Applications
4sensing.honeywell.com
ZW Series
PRODUCT NOMENCLATURE
ZW
Switch Type Current
Rating
50
Circuitry
3
4
1SPDT
SPNO 2
NOTES:
1
Not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance.
2
Termination style “99” and/or Actuator Type “S” designates a special and therefore requires a special designator letter at the end of the listing
3
Lever length is measured as follows: Straight lever - from center line of the pivot to the end of the lever; Roller and simulated roller lever - fr
om the center line of the pivot to the center of
the r
oller diameter. See page 8 for more details.
4
Standard wire length is 500 mm [19.68 in] long. Other lengths are available upon request. Lead wire with end stripped 3,0 mm [0.118 in] and pre-tinned.
COM: black; NC: gray; NO: blue
5
Standard lead wire is UL1007 20 AWG cable. Other lead wire types, such as UL1015, UL1430, UL1061, and AVSS are available upon request.
-
E
150 g max.
203 g max.
Operating Force4
(at pin plunger)
F
ZW Series
Sealed
Subminiature
Basic
Switch
50
10
Cable, bottom
exit (500 mm)
(UL10007 Dia 1.0)4,5
Cable, side exit
(Opposite plunger)
(500 mm) (UL1007 Dia)
4,5
Cable, side exit
(Plunger end)
(500 mm) (UL1007 Dia)
4,5
Long solder
2,8 mm x 0,5 mm
[0.11 in x 0.02 in]
PCB, straight
Solder
Terminal
Type
B20
Pin plunger
C70
90 D
91
92
SPECIAL3
99
Actuator Type3
(Levers Mounted Internally)
—
15 A
A
1
Construction
D
A special designator
is used to indicate
a non-standard featur
e,
such as a special
actuator, wire color,
wire length, connector,
etc. This code
consists of up to three
alphanumeric
characters.
Special
Designator3
15
Short straight
lever (17,4 mm) W
IP00
Dust tight
D
IP67
Water tight
Standard straight
lever (19,4 mm)
Long straight
lever (25,5 mm)
E
F
H
Simulated roller
lever (18,7 mm;
R 3,4 mm)
Roller lever
(17,2 mm;
Ø 4,8 mm)
Small simulated
roller lever
(18,6 mm; R1,3 mm)
J
S
Long straight
lever (55,9 mm)
SPECIAL
Lever2
0.1A 125/250 Vac
(Gold-plated
contacts)
6A: 125/250 Vac
(Silver contacts) F
SPNC 2
ONLY
5
sensing.honeywell.com
MICRO SWITCH™ Sealed Subminiature Basic Switches
Table 1. Specifications
Characteristic ZW10 Series (Logic Level) ZW50 Series (Power Duty)
Circuitry SPDT, SPNC, SPNO SPDT, SPNC, SPNO
Operating force 150 g or 203 g @ plunger 150 g or 203 g @ plunger
Termination PCB, solder, prewired PCB, solder, prewired
Sealing IP67 (prewired), IP00 for exposed terminals IP67 (prewired), IP00 for exposed terminals
Actuators (levers 300 series
stainless steel)
pin plunger, flat lever, roller lever, sim. roller lever,
special levers
pin plunger, flat lever, roller lever, sim. roller lever,
special levers
Agency certification UL, cUL, ENEC, CQC, RoHS compliant UL, cUL, ENEC, CQC, RoHS compliant
Operating temperature
(Manufacturer rated)
-40 °C to 120 °C [-40 °F to 248 °F] (terminal)
-20 °C to 70 °C [-4 °F to 158 °F] (pre-wired)
-40 °C to 120 °C [-40 °F to 248 °F] (terminal)
-20 °C to 70 °C [-4 °F to 158 °F] (pre-wired)
Mechanical endurance (cycles) 1,000,000 min. @ 120 cycles/minute max. 1,000,000 min. @ 120 cycles/minute max.
Switch resistance (initial) 50 mΩ max. (terminals); 100 mΩ max (pre-wired) 50 mΩ max. (terminals); 100 mΩ max (pre-wired)
Insulation resistance (initial) 100 MΩ min. (500 Vdc for one minute) 100 MΩ min. (500 Vdc for one minute)
Dielectric strength (initial)
(between live parts and ground)
1500 VRMS for one minute
<0.5 mA leakage current
1500 VRMS for one minute
<0.5 mA leakage current
Plunger seal silicone silicone
Contact material gold-plated silver silver
Housing material case, PBT (polyester); cover, PBT (polyester) case, PBT (polyester); cover, PBT (polyester)
Note: Refer to engineering drawing for additional information.
Table 2. Electrical Ratings
Switch option CQC (Asia-Pacific)
Per GB 15092-1
ENEC (Europe)
Per IEC 61058-1
UL, cUL (Americas)
UL 61058-1, File 12252
ZW10 Series
(Gold-plated contacts)
0.1 A, 125/250 Vac
10,000 cycles
0.1 A, 250 Vac
10,000 cycles
0.1 RA, 125/250 Vac
10,000 cycles
ZW50 Series
(Silver contacts)
6 A, 125/250 Vac
10,000 cycles
6 A, 250 Vac
10,000 cycles
5 RA, 125/250 Vac
10,000 cycles
Note: The agency “use temperature” for solder or PCB terminals: 0 °C to 120 °C [32 °F to 248 °F];
CQC/ENEC “use temperature” for wire leads: 0 °C to 70 °C [32 °F to 158 °F].
UL/cUL “use temperature” for wire leads: 0 °C to 55 °C [32 °F to 131 °F].
6sensing.honeywell.com
ZW Series O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
Catalog Listing Actuator
Circuitry/
Contact
Material
Elect.
Rating
Spec.
(page 5)
Termination O.F. max.
N [g]
R.F. max.
N [g]
O.P. from mounting
hole
mm [in]
(see page 8)
O.P. from base of
terminal
mm [in]
(see page 8)
P.T. max. O.T. min. D.T. max.
Pin plunger
ZW10F20AD1 Pin plunger SPDT/
Gold plate 0.1 A PCB 2,00 N [203 g] 0,49 N [50 g] – 11,5 ±0,3
[0.45 ±0.012] 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
ZW10F90AW1 Pin plunger SPDT/
Gold plate 0.1 A Wire leads, bottom exit
(500 mm) 2,00 N [203 g] 0,49 N [50 g] 8,4 ±0,3
[0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
ZW50F15AD1 Pin plunger SPDT/
Silver 6 A Solder 2,00 N [203 g] 0,49 N [50 g] 8,4 ±0,3
[0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
ZW50F90AW1 Pin plunger SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 2,00 N [203 g] 0,49 N [50 g] 8,4 ±0,3
[0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
ZW50F92AW3 Pin plunger SPNO/
Silver 6 A Wire leads, side exit,
plunger side (500 mm) 2,00 N [203 g] 0,49 N [50 g] 8,4 ±0,3
[0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
Std. straight lever
ZW10E15CD1 Standard straight lever,
19,4 mm [0.76 in]
SPDT/
Gold plate 0.1 A Solder 0,54 N [55 g] 0,11 N [11 g] 8,8 ±1,2
[0.35 ±0.047] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in]
ZW50F90CW3 Standard straight lever,
19,4 mm [0.76 in]
SPNO/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,65 N [66 g] 0,13 N [13 g] 8,8 ±1,2
[0.35 ±0.047] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in]
ZW50F92CW3 Standard straight lever,
19,4 mm [0.76 in]
SPNO/
Silver 6 A Wire leads, side exit,
plunger side (500 mm) 0,65 N [66] g 0,13 N [13 g] 8,8 ±1,2
[0.35 ±0.047] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in]
Long straight lever
ZW50F90DW1 Long straight lever,
25,5 mm [1.0 in]
SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,53 N [54 g] 0,11 N [11 g] 8,8 ±1,6
[0.35 ±0.063] – 6,3 mm [0.25 in] 1,6 mm [0.06 in] 0,9 mm [0.04 in]
ZW50F90JW1 Longer straight lever,
52,9 mm [2.20 in]
SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,32 N [33 g] 0,07 N [7 g] 8,8 ±3,5
[0.34 ±0.138] – 13,8 mm [0.54 in] 2,9 mm [0.11 in] 3,60 mm [0.14 in]
Sim. roller lever
ZW50F90EW3
Sim. roller lever,
18,65 mm [0.73 in]
radius: 3,4 mm [0.13 in]
SPNO/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,68 N [69 g] 0,13 N [13 g] 11,7 ±1,15
[0.46 ±0.045] – 4,7 mm [0.18 in] 0,9 mm [0.04 in] 0,75 mm [0.03 in]
Sim. roller lever
ZW50F90HW1
Small radius, sim. roller lever,
18,6 mm [0.73 in]
radius: 1,3 mm [0.05 in]
SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,67 N [68 g] 0,14 N [14 g] 10,7 ±1,2
[0.42 ±0.047] – 4,6 mm [0.18 in] 1,0 mm [0.04 in] 0,75 mm [0.03 in]
ZW50F91HW1
Small radius, sim. roller lever,
18,6 mm [0.73 in]
radius: 1,3 mm [0.05 in]
SPDT/
Silver 6 A
Wire leads, side exit,
opposite plunger
(500 mm)
0,67 N [68 g] 0,14 N [14 g] 10,7 ±1,2
[0.42 ±0.047] – 4,6 mm [0.18 in] 1,0 mm [0.04 in] 0,75 mm [0.03 in]
Roller lever
ZW10E70FD1 Roller lever,
17,2 mm [0.68 in]
SPDT/
Gold plate 0.1 A Solder (long terminal) 0,59 N [60 g] 0,12 N [12 g] 14,5 ±1,1
[0.57 ±0.043] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in]
ZW10E90FW1 Roller lever
17,2 mm [0.68 in]
SPDT/
Gold plate 0.1 A Wire leads, bottom exit
(500 mm) 0,59 N [60 g] 0,12 N [12 g] 14,5 ±1,1
[0.57 ±0.043] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in]
ZW50F90FW1 Roller lever
17,2 mm [0.68 in]
SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,71 N [72 g] 0,15 N [15 g] 14,5 ±1.1
[0.57 ±0.043] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in]
7
sensing.honeywell.com
MICRO SWITCH™ Sealed Subminiature Basic Switches
Catalog Listing Actuator
Circuitry/
Contact
Material
Elect.
Rating
Spec.
(page 5)
Termination O.F. max.
N [g]
R.F. max.
N [g]
O.P. from mounting
hole
mm [in]
(see page 8)
O.P. from base of
terminal
mm [in]
(see page 8)
P.T. max. O.T. min. D.T. max.
Pin plunger
ZW10F20AD1 Pin plunger SPDT/
Gold plate 0.1 A PCB 2,00 N [203 g] 0,49 N [50 g] – 11,5 ±0,3
[0.45 ±0.012] 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
ZW10F90AW1 Pin plunger SPDT/
Gold plate 0.1 A Wire leads, bottom exit
(500 mm) 2,00 N [203 g] 0,49 N [50 g] 8,4 ±0,3
[0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
ZW50F15AD1 Pin plunger SPDT/
Silver 6 A Solder 2,00 N [203 g] 0,49 N [50 g] 8,4 ±0,3
[0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
ZW50F90AW1 Pin plunger SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 2,00 N [203 g] 0,49 N [50 g] 8,4 ±0,3
[0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
ZW50F92AW3 Pin plunger SPNO/
Silver 6 A Wire leads, side exit,
plunger side (500 mm) 2,00 N [203 g] 0,49 N [50 g] 8,4 ±0,3
[0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in]
Std. straight lever
ZW10E15CD1 Standard straight lever,
19,4 mm [0.76 in]
SPDT/
Gold plate 0.1 A Solder 0,54 N [55 g] 0,11 N [11 g] 8,8 ±1,2
[0.35 ±0.047] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in]
ZW50F90CW3 Standard straight lever,
19,4 mm [0.76 in]
SPNO/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,65 N [66 g] 0,13 N [13 g] 8,8 ±1,2
[0.35 ±0.047] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in]
ZW50F92CW3 Standard straight lever,
19,4 mm [0.76 in]
SPNO/
Silver 6 A Wire leads, side exit,
plunger side (500 mm) 0,65 N [66] g 0,13 N [13 g] 8,8 ±1,2
[0.35 ±0.047] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in]
Long straight lever
ZW50F90DW1 Long straight lever,
25,5 mm [1.0 in]
SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,53 N [54 g] 0,11 N [11 g] 8,8 ±1,6
[0.35 ±0.063] – 6,3 mm [0.25 in] 1,6 mm [0.06 in] 0,9 mm [0.04 in]
ZW50F90JW1 Longer straight lever,
52,9 mm [2.20 in]
SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,32 N [33 g] 0,07 N [7 g] 8,8 ±3,5
[0.34 ±0.138] – 13,8 mm [0.54 in] 2,9 mm [0.11 in] 3,60 mm [0.14 in]
Sim. roller lever
ZW50F90EW3
Sim. roller lever,
18,65 mm [0.73 in]
radius: 3,4 mm [0.13 in]
SPNO/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,68 N [69 g] 0,13 N [13 g] 11,7 ±1,15
[0.46 ±0.045] – 4,7 mm [0.18 in] 0,9 mm [0.04 in] 0,75 mm [0.03 in]
Sim. roller lever
ZW50F90HW1
Small radius, sim. roller lever,
18,6 mm [0.73 in]
radius: 1,3 mm [0.05 in]
SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,67 N [68 g] 0,14 N [14 g] 10,7 ±1,2
[0.42 ±0.047] – 4,6 mm [0.18 in] 1,0 mm [0.04 in] 0,75 mm [0.03 in]
ZW50F91HW1
Small radius, sim. roller lever,
18,6 mm [0.73 in]
radius: 1,3 mm [0.05 in]
SPDT/
Silver 6 A
Wire leads, side exit,
opposite plunger
(500 mm)
0,67 N [68 g] 0,14 N [14 g] 10,7 ±1,2
[0.42 ±0.047] – 4,6 mm [0.18 in] 1,0 mm [0.04 in] 0,75 mm [0.03 in]
Roller lever
ZW10E70FD1 Roller lever,
17,2 mm [0.68 in]
SPDT/
Gold plate 0.1 A Solder (long terminal) 0,59 N [60 g] 0,12 N [12 g] 14,5 ±1,1
[0.57 ±0.043] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in]
ZW10E90FW1 Roller lever
17,2 mm [0.68 in]
SPDT/
Gold plate 0.1 A Wire leads, bottom exit
(500 mm) 0,59 N [60 g] 0,12 N [12 g] 14,5 ±1,1
[0.57 ±0.043] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in]
ZW50F90FW1 Roller lever
17,2 mm [0.68 in]
SPDT/
Silver 6 A Wire leads, bottom exit
(500 mm) 0,71 N [72 g] 0,15 N [15 g] 14,5 ±1.1
[0.57 ±0.043] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in]
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
8sensing.honeywell.com
ZW Series
MOUNTING DIMENSIONS
9,50 ± 0,15
[0.374 ±0.005]
5,20
[0.205]
2,30 ±0,10
Ø 2,30 ± 0,10
2,60 ± 0,10
2,35
[0.093]
6,40
[0.252]
19,80
[0.780]
9,25
[0.364]
MOUNTING DIMENSIONS
6,90
[0.272]
2,80
[0.110]
2,40
[0.094]
7,50
[0.295]
7,50
[0.295]
4,10
[0.161]
0,50 ±0,05
[0.020 ±0.002]
2,80
[0.110]
0,80
[0.031]
0,50 ±0,05
[0.020
± 0.002]
2,80
[0.110]
7,50
[0.295] 7,50
[0.295]
3,20
[0.126]
2,40
[0.094]
2,40
[0.094]
500 min.
[19,685]
7,50
[0.295] 7,50
[0.295]
OP
PT
500 min.
[19.685]
500 min.
[19.685]
15,40
[0.606]
19,25 [0.758] SPDT
15,40 [0.606] SPST
19,25 [0.758] SPDT
15,40 [0.606] SPST
Ø1,80
[0.071]
7,50
[0.295] 7,50
[0.295]
Ø 0,80
[0.032]
Ø 1,80
[0.071]
Ø1,20
[0.047]
TERMINAL TYPES
TYPE 15 - SOLDER (STRAIGHT)
TYPE 92 - CABLE-SIDE EXIT
[PLUNGER END]
NC NO COM
(GRAY) (BLUE) (BLACK)
B
A
COM (BLACK)
NO (BLUE)
NC (GRAY)
NC (GRAY)
NO (BLUE)
COM (BLACK)
B DIRECTION
A DIRECTION
5,10
[0.201]
17,20
[0.677]
7,50
[0.295]
OP
PT
FP
Ø 2,15
[0.085]
17,40
[0.685]
PT
OP
19,40
[0.764]
PT
OP
7,50
[0.295] 4,85
[0.191]
PT
OP
7,50
[0.295] 4,85
[0.191]
OP
PT
18,65
[0.734]
OP
PT
7,50
[0.295] 4,85
[0.191]
OP
PT
7,50
[0.295] 4,85
[0.191]
18,60
[0.732] PT
7,50
[0.295] 4,85
[0.191]
55,90
[2.201]
OP
R3,40
[0.134] Ø4,80
[o.189]
R1,30
[0.051]
7,45
[0.293]
PT
OP
FP
4,85
[0.191]
7,50
[0.295] 7,50
[0.295] 4,85
[0.191]
6,00
[0.236]
6,00
[0.236] 6,00
[0.236]
6,00
[0.236]
6,00
[0.236]
6,00
[0.236]
6,00
[0.236]
ACTUATOR TYPES
(ALL ACTUATORS EXCEPT TYPE A AND F ARE 4.0 WIDE)
TYPE A
PIN PLUNGER
TYPE B
SHORT STRAIGHT LEVER (17.4MM)
TYPE C
STANDARD STRAIGHT LEVER (19.4mm)
TYPE D
LONG STRAIGHT LEVER (25.5MM)
TYPE E
SIMULATED ROLLER LEVER (18.7MM,R3.4)
TYPE F
ROLLER LEVER (17.2MM, ROLL Ø4.8) TYPE H
SMALL SIMULATED ROLLER LEVER (18.6MM,R1.3)
TYPE J
LONGEST STRAIGHT LEVER (55.9MM)
ABOVE ''OP" FROM MOUNTING HOLE
"OP" FROM TERMINAL
(FOR TYPE 20 TERMINAL)
TYPE 90 - CABLE-BOTTOM EXITTYPE 20 - PCB (STRAIGHT) TYPE 70 -LONG SOLDER TERMINALS
TYPE 91 - CABLE-SIDE EXIT
[OPPOSITE PLUNGER END]
[0.091 ±0.003]
[0.102 ±0.003]
[0.091 ±0.003]
(35°)
0,60 ±0,05
[0.024 ±0.002]
(35°) (35°)
0,50 ±0,05
[0.020 ±0.002]
3,0 ±1,0
[0.118 ±0.039]
3,0 ±1,0
[0.118 ±0.039]
Ø 0,80
[0.032]
Ø1,80
[0.071]
3,0 ±1,0
[0.118 ±0.039]
Ø 0,80
[0.032]
Ø1,80
[0.071]
Note: unless otherwise noted,
a tolerace of ±0,4 mm applies
to all dimensions.
004989-2-EN IL50 GLO
February 2016
Copyright © 2016 Honeywell International Inc. All rights reserved.
Sensing and Productivity Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and switching products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
ADDITIONAL INFORMATION
The following associated literature is available on the Honeywell web
site at sensing.honeywell.com:
• Product installation instructions
• Product range guide
• Product nomenclature tree
• Product application-specific information
– Case study: Stamp of approval, ZW Series
– Application note: Sensors and switches for potential HVAC/R
applications
– Application note: Sensors and switches in industrial air
compressors
– Application note: Sensors and switches in sanitary valves
– Application note: Sensors and switches in valves and flow
meters
– Application note: Sensors and switches for potential medical
applications
– Application note: Sensors and switches for valve monitors and
valve indicators
– Application note: Watertight switches in transportation
applications
– Technical bulletin: Applying precision switches
– Technical bulletin: Low energy switch guide
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
• Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particu-
lar purpose. In no event shall Honeywell be liable for conse-
quential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
