FSV1060V 10 A, 60 V Ultra-Low VF Schottky Rectifier Features Description * Ultra-Low Forward Voltage Drop: - 0.47 V Typical at 10 A, TA = 25C - 0.52 V Maximum at 10 A, TA = 25C * Low Thermal Resistance * Very Low Profile: Typical Height of 1.1 mm * RoHS Compliant * Halogen Free * Meets MSL 1 per JESD22-A111 Full-Body Solder Immersion The FSV1060V schottky rectifier offers break-through size and performance. The device is optimized for mobile charger applications. It sinks only 13 mA reverse current at high temperature and provides forward voltage drop of 0.2 V at 1 A operating current in a charger design. All this capability is packed into a small, flat-lead, TO-277 package, optimized for space-constrained applications. The FSV1060V supports a typical Z height of 1.1 mm. It is RoHS compliant and halogen free. It is also qualified for a wave soldering process. Applications 3 * Mobile Charger * Solar Panel * Reverse Polarity Protection 2 TO-277 1 3 Cathode Anode 1 Anode 2 Ordering Information Part Number Top Mark Package Packing Method FSV1060V FSV1060V TO-277 3L Tape and Reel (c) 2014 Fairchild Semiconductor Corporation FSV1060V Rev. 1.2 www.fairchildsemi.com FSV1060V -- 10 A, 60 V Ultra-Low VF Schottky Rectifier May 2015 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Symbol Parameter Value Unit VRRM Peak Repetitive Reverse Voltage 60 V VRWM Working Peak Reverse Voltage 60 V VRMS RMS Reverse Voltage 42 V 60 V 10 A 280 A VR DC Blocking Voltage IO Average Rectified Output Current(2) TL = 90C Non-Repetitive Peak Forward Surge Current IFSM (3) CJ Typical Junction Capacitance 550 pF TJ Operating Junction Temperature Range -55 to +150 C Storage Temperature Range -55 to +150 C TSTG VR = 4 V, 1 MHz Notes: 1. All tests conducted at TA = TJ = 25C unless otherwise noted. 2. Mounted on 30 mm x 30 mm FR4 PCB. 3. Pulse condition: 8.3 ms single half-sine wave. Test method is compliant with MIL standard. (MIL-STD-750E) Thermal Characteristics(4) Values are at TA = 25C unless otherwise noted. Symbol RJA JL Minimum Maximum Land Pattern Land Pattern Parameter Junction-to-Ambient Thermal Resistance 105 38 Junction-to-Lead Thermal Characteristics, Thermocouple Soldered to Anode 18 13 Junction-to-Lead Thermal Characteristics, Thermocouple Soldered to Cathode 8 Unit C/W C/W 5 Note: 4. The thermal resistances (RJA & JL) are characterized with device mounted on the following FR4 printed circuit boards, as shown in Figure 1 and Figure 2. PCB size: 76.2 x 114.3 mm. Minimum land pattern size: 4.9 x 4.8 mm (big pattern, x1), 1.4 x 1.52 mm (small pattern, x2). Maximum land pattern size: 30 x 30 mm (pattern, x2). Force line trace size = 55 mils, sense line trace size = 4 mils. F S F S F S F S F S Figure 1. Minimum Land Pattern of 2 oz Copper (c) 2014 Fairchild Semiconductor Corporation FSV1060V Rev. 1.2 Figure 2. Maximum Land Pattern of 2 oz Copper www.fairchildsemi.com 2 FSV1060V -- 10 A, 60 V Ultra-Low VF Schottky Rectifier Absolute Maximum Ratings(1) Values are at TA = 25C unless otherwise noted. Symbol VBR Parameter Breakdown Voltage Conditions IT = 500 A IF = 1 A VF Forward Voltage Drop IF = 10 A IF = 1 A IF = 10 A IR Maximum Leakage (c) 2014 Fairchild Semiconductor Corporation FSV1060V Rev. 1.2 V = VRWM Min. Typ. Max. 60 TA = 25C TA = 125C Unit V 0.30 0.47 0.52 0.20 V 0.46 TA = 25C 0.056 TA = 125C 13 0.220 mA www.fairchildsemi.com 3 FSV1060V -- 10 A, 60 V Ultra-Low VF Schottky Rectifier Electrical Characteristics 100000 TA = 150oC 10000 Reverse Current, IR[uA] Forward Current, IF [A] 10 1 TA = 125oC TA = -55oC 0.1 TA = 85oC TA = 25oC 0.01 1000 o 10 TA=150 C o o TA=125 C TA=85 C 100 o TA=25 C 1 0.1 0.01 0.0 0.1 0.2 0.3 0.4 o TA=-55 C 1E-3 10 0.001 0.5 15 20 Forward Voltage, VF [V] 30 35 40 45 50 55 60 Reverse Voltage, VR[V] Figure 3. Forward Current Characteristics Figure 4. Typical Reverse Characteristics 12 Average Current, [A] 10000 Junction Capacitance, CJ[pF] 25 1000 jl (30mm x 30mm Pad) 10 8 jl (Min. Pad) 6 4 ja (30mm x 30mm Pad) 2 ja (Min. Pad) 100 1 10 0 100 Reverse Voltage, VR[V] Peak Forward Surge Current, IFSM[A] Figure 5. Typical Junction Capacitance 0 25 50 75 100 125 150 o Ambient / Lead Temperature, [ C] 175 Figure 6. Forward Current Derating Curve 300 250 200 150 100 50 0 0 20 40 60 80 100 Number of Cycles Figure 7. Surge Current Derating Curve (c) 2014 Fairchild Semiconductor Corporation FSV1060V Rev. 1.2 www.fairchildsemi.com 4 FSV1060V -- 10 A, 60 V Ultra-Low VF Schottky Rectifier Typical Performance Characteristics B A D 6.65 6.35 6.15 5.67 1.40 1.10 (2X) 4.65 MIN 4.63 4.25 1.45 MIN 4.15 MIN 1.97 TOP VIEW 0.01 0.63 0.43 (2X) SEATING PLANE C 2.75 LAND PATTERN RECOMMENDATION 0.40 0.23 (0.35) 1.20 1.00 FRONT VIEW D D 1.15 MIN 1.00 4.90 4.23 4.15 2.25 3.25 1.95 1.25 0.90 2.20 2.00 NOTES: UNLESS OTHERWISE SPECIFIED A. PACKAGE REFERENCE: JEDEC TO-277 B. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS. C. ALL DIMENSIONS ARE IN MILLIMETERS. D DOES NOT COMPLY TO JEDEC STANDARD VALUE. E. DRAWING FILENAME: MKT-TO277A03rev4 0.913 3.680 (0.25) BOTTOM VIEW 0.60 DAP OPTION 4.75 MAX 3.81 BOTTOM VIEW - DAP OPTION TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid(R) MTi(R) MTx(R) MVN(R) mWSaver(R) OptoHiT OPTOLOGIC(R) AccuPower AttitudeEngineTM Awinda(R) AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FastvCore FETBench FPS OPTOPLANAR(R) (R) Power Supply WebDesigner PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R)* TinyBoost(R) TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM XsensTM (R) * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. AUTHORIZED USE Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive or other transportation, (2) military/aerospace, (3) any safety critical application - including life critical medical equipment - where the failure of the Fairchild product reasonably would be expected to result in personal injury, death or property damage. Customer's use of this product is subject to agreement of this Authorized Use policy. In the event of an unauthorized use of Fairchild's product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be subject to Fairchild's Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Terms of Use Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I77 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fairchild Semiconductor: FSV1060V