Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302 USA
+1 201.432.0463
Bel.US.CS@belf.com
belfuse.com/circuit-protection
Environmental Specifications
Electrical Specifications
Typical
Cold
Resistance
(ohms)
Volt-drop
@100% In
(Volt) max.
Voltage and
Interrupting
Ratings
Melting I²T
@10 In
(A² Sec)
Maximum
Power
Dissipation
(W)
See Table of Safety
Approvals on Page 1
for Voltage and
associated
Interrupting Ratings
Consult manufacturer for other ratings
MIL-STD-202G, Method 213B, Test Condition 1
(100 G's peak for 6 milliseconds; Sawtooth waveform)
MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion).
MIL-STD-202G, Method 101E, Test Condition B (48 hrs).
MIL-STD-202G, Method 302, Test Condition B
(After Opening) 0.1Mohms minimum.
MIL-STD-202G, Method 208H
Resistance to solder Heat
MIL-STD-202G, Method 210F, Test Condition J. (235℃,30 sec)
MIL-STD-202G, Method 107G, Test Condition B
(-65℃ to +125℃).
Moisture Sensitivity Level
1 ( Peak Temperature at 240℃ for 30 seconds max )
Specifications subject to change without notice