Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
PNP/NPN Epitaxial Planar Silicon Transistors
DC/DC Converter Applications
Ordering number:ENN6078A
CPH3109/CPH3209
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
31201TS KT/41000TS (KOTO) TA-1721 No.6078–1/5
0.05
0.9
0.7 0.2 1.6 0.60.6
1.9
12
3
2.8
0.2
2.9 0.15
0.4
Package Dimensions
unit:mm
2150A
[CPH3109/CPH3209]
Applications
· Relay drivers, lamp drivers, motor drivers, strobes.
Features
· Adoption of MBIT processes.
· Large current capacitance.
· Low collector-to-emitter saturation voltage.
· High-speed switching.
· Ultrasmall package facilitates miniaturization in end
products (mounting height : 0.9mm).
· High allowa ble power dissipation.
˚C
˚C
Electrical Characteristics at Ta = 25˚C
1 : Base
2 : Emitter
3 : Collector
SANYO : CPH3
Mounted on a ceramic board (600mm2×0.8mm)
Marking : CPH3109 : AJ, CPH3209 : CJ Continued on next page.
Specifications
( ) : CPH3109
Absolute Maximum Ratings at Ta = 25˚C
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVesaB-ot-rotcelloCV
OBC 04)03–(V
egatloVrettimE-ot-rotcelloCV
OEC 03)–(V
egatloVesaB-ot-rettimEV
OBE 5)–(V
tnerruCrotcelloCI
C3)–(A
)esluP(tnerruCrotcelloCI
PC 5)–(A
tnerruCesaBI
B006)–(Am
noitapissiDrotcelloCP
C9.0W
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55–
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
tnerruCffotuCrotcelloCI
OBC VBC I,V03)–(= E0=1.0)–(Aµ
tnerruCffotuCrettimEI
OBE VBE I,V4)–(= C0=1.0)–(Aµ
niaGtnerruCCD hEF VEC I,V2)–(= CAm005)–(= 002065
tcudorPhtdiwdnaB-niaGf
TVEC I,V01)–(= CAm005)–(= )083(zHM
054zHM
ecnaticapaCtuptuOboCV
BC zHM1=f,V01)–(= 02)52(Fp
CPH3109/CPH3209
No.6078–2/5
Continued from preceding page.
Switching Time Test Circuit
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
egatloVnoitarutaSrettimE-ot-rotcelloC V)tas(EC 1I
CI,A5.1)–(= BAm03)–(= )551–()032–(Vm
021081Vm
V)tas(EC 2I
CI,A5.1)–(= BAm57)–(=501)–(551)–(Vm
egatloVnoitarutaSrettimE-ot-esaBV
)tas(EB ICI,A5.1)–(= BAm03)–(=38.0)–(2.1)–(V
egatloVnwodkaerBesaB-ot-rotcelloCV
OBC)RB( ICI,Aµ01)–(= E0= )03–(V
04V
egatloVnwodkaerBrettimE-ot-rotcelloCV
OEC)RB( ICR,Am1)–(= EB =∞03)–(V
egatloVnwodkaerBesaB-ot-rettimEV
OBE)RB( IEI,Aµ01)–(= C0=5)–(V
emiTNO-nruTt
no .tiucrictsetdeificepseeS 03)05(sn
emiTegarotSt
gts .tiucrictsetdeificepseeS )072(sn
003sn
emiTllaFt
f.tiucrictsetdeificepseeS 51)52(sn
IC
-
VCE IC
-
VCE
IC
-
VBE IC
-
VBE
CPH3109
CPH3209
I
B
=0
-2.0mA
-4.0mA
-6.0mA
-8.0mA
-10mA
-30mA
-40mA
-50mA
-20mA
I
B
=0
2.0mA
4.0mA
50mA
8.0mA
6.0mA
10mA
20mA
CPH3109
VCE=-2V CPH3209
VCE=2V
00 -200 -400 -600 -800 -1000
-0.4
-0.8
-1.2
-1.6
-2.0
0 200 400 600 800 1000
0
0.4
0.8
1.2
1.6
2.0
30mA
40mA
Ta=75°C
25°C
-25°C
Ta=75°C
25°C
-25°C
00 0.2 0.4 0.6 1.21.00.8
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
00 -0.2 -0.4 -0.6 -1.2-1.0-0.8
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
-3.5
-4.0
Collector Current, IC–A
Collector-to-Emitter Voltage, VCE –mV
Collector Current, IC–A
Collector-to-Emitter Voltage, VCE –mV
Collector Current, IC–A
Base-to-Emitter Voltage, VBE –V
Collector Current, IC–A
Base-to-Emitter Voltage, VBE –V
INPUT
OUTPUT
100µF 470µF
50ΩVR
24Ω
RB
IB1
IB2
-
5V 12V
PW=20µs
DC≤1%
++
20IB1=
-
20IB2=IC=500mA
(For PNP, the polarity is reversed.)
CPH3109/CPH3209
No.6078–3/5
VCE(sat)
-
ICVCE(sat)
-
IC
Cob
-
VCB Cob
-
VCB
CPH3109
I
C
/
I
B
=20 CPH3209
I
C
/
I
B
=20
CPH3109
f=1MHz CPH3209
f=1MHz
2
2
22
3
5
7
35 573
10
100
1.0 10
2
2
22
3
5
7
35 573
10
100
-1.0 -10
25°C
Ta=75°C
–25°C
Ta=75°C
–25°C
25°C
2
3
5
7
2
3
5
7
10
100
1000
2
10 100 1000
357 23 2357
CPH3109
VCE=-10V CPH3209
VCE=10V
fT
-
ICfT
-
IC
2
3
5
7
2
3
5
7
10
100
1000
2
-10 -100 -1000
2357 35 237
2
3
5
7
2
3
5
7
2
3
5
7
23 57 23 5 23 577
-0.001
-0.01
-0.1
-1.0
-0.01 -0.1 -1.0 -10
2
3
5
7
2
3
5
7
2
3
5
7
0.001
0.01
0.1
1.0
23 57 23 5 23 577
0.01 0.1 1.0 10
Collector Current, IC–mA Collector Current, IC–mA
Gain-Bandwidth Product, fT–MHz
Gain-Bandwidth Product, fT–MHz
Output Capacitance, Cob – pF
Collector-to-Base Voltage, VCB –V
Output Capacitance, Cob – pF
Collector-to-Base Voltage, VCB –V
Collector Current, IC–A
Collector-to-Emitter
Saturation Voltage, VCE(sat) –V
Collector-to-Emitter
Saturation Voltage, VCE(sat) –V
Collector Current, IC–A
CPH3109
VCE=-2V CPH3209
VCE=2V
hFE
-
IChFE
-
IC
Ta=75°C
25°C
-25°C
2
3
5
7
2
3
5
7
10
100
1000
2 3 57 2 3 57 2 3 57
-0.01 -0.1 -1.0 -10
Ta=75°C
25°C
-25°C
2
3
5
7
2
3
5
7
23 5723
5723
57
10
100
1000
0.01 0.1 1.0 10
DC Current Gain, hFE
Collector Current, IC–A
DC Current Gain, hFE
Collector Current, IC–A
CPH3109/CPH3209
No.6078–4/5
VCE(sat)
-
ICVCE(sat)
-
IC
CPH3109
I
C
/
I
B
=50 CPH3209
I
C
/
I
B
=50
25°C
Ta=75°C
–25°C
25°C
Ta=75°C
–25°C
2
3
5
7
2
3
5
7
2
3
5
7
23 57 23 5 23 577
-0.01
-0.1
-1.0
-10
-0.01 -0.1 -1.0 -10
2
3
5
7
2
3
5
7
2
3
5
7
23 57 23 5 23 577
0.01
0.1
1.0
10
0.01 0.1 1.0 10
Collector Current, IC–A
Collector-to-Emitter
Saturation Voltage, VCE(sat) –V
Collector-to-Emitter
Saturation Voltage, VCE(sat) –V
Collector Current, IC–A
PC
-
Ta
A S O
ICP=5A
IC=3A
CPH3109/3209
1ms
10ms
100ms
DC operation
CPH3109/3209
100µs
500µs
00 20 40 60 10080 160140120
0.2
0.4
0.6
0.8
1.2
1.0
0.9
0.01
0.1
1.0
10
0.1 1.0 10
2
3
5
7
2
3
5
7
2
3
5
7
23 57 23 5 23 57
VBE(sat)
-
ICVBE(sat)
-
IC
CPH3109
I
C
/
I
B
=50
25
°C
Ta=-25°C
75
°C
CPH3209
I
C
/
I
B
=50
25
°C
Ta=-25°C
75
°C
2
3
5
7
2
3
5
7
23 57 23 57 23 57
-0.1
-1.0
-10
-0.01 -0.1 -1.0 -10
2
3
5
7
2
3
5
7
22357 35 23577
0.1
1.0
10
0.01 0.1 1.0 10
Collector Current, IC–A
Base-to-Emitter
Saturation Voltage, VBE(sat) – V
Collector Current, IC–A
Base-to-Emitter
Saturation Voltage, VBE(sat) – V
Collector Current, IC–A
Collector-to-Emitter Voltage, VCE –V
Collector Dissipation, PC–W
Ambient Temperature, Ta – °C
Mounted on a ceramic board (600mm
2
×0.8mm)
Mounted on a ceramic board(600mm
2
×0.8mm)
For PNP, minus sign is omitted.
Ta=25°C
Single pulse
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of March, 2001. Specifications and information herein are subject to
change without notice.
CPH3109/CPH3209
PS No.6078–5/5