COMMUNICATIONS MODULES & SUBSYSTEMS WaveReadyTM WRT-780 Dual Multirate WDM Transponder (125 Mb/s-4.25 Gb/s) Key Features * Provides automatic rate detection (125 Mb/s-4.25 Gb/s) * Supports flexible, pluggable SFP interfaces on both line and client interfaces * Supports both CWDM and DWDM line side optics * Supports diagnostic loopback on all ports * Supports 3R Regeneration on all ports Flexible WDM Transport Solution Applications * Enables high-density DWDM and CWDM transport networks * Offers a cost-effective Ethernet over WDM solution * Extends the reach of SANs and Gigabit Ethernet (GigE) * Provides wavelength services and metro optical access overlay Compliance * Telcordia GR-253 * NEBS 3 * FCC Part 15, Class A device * UL 60950-1 first edition * Class 1 laser safety * RoHS (exemptions 7b, 8a) NORTH AMERICA : 800 498-JDSU (5378) The JDSU WaveReady WRT-780 is a dual multirate transponder that can support an extended number of services for both coarse (CWDM) and dense wavelength division multiplexing (DWDM) transport applications. Due to its high flexibility and density, the WRT-780 is the ideal transport solution for access and metro wavelength division multiplexing (WDM) networks. The module has two independent transponders that can transport traffic running at different rates. The WRT-780 can also be used as a bidirectional four-port regenerator. Its flexible pluggable (SFP) interfaces support a variety of transceivers on both client and line interfaces (850, 1310, and 1550 nm; DWDM; and CWDM). Automatic Rate Detection The WRT-780 automatically detects incoming data rates so end-user provisioning is not required. The WRT-780 supports 3R operation (reshape, retime, and regenerate) at all supported rates between 125 Mb/s and 4.25 Gb/s. Simple and Easy to Manage The WRT-780 can be managed using TL-1, simple network management protocol (SNMP), or by using the WaveReady Node Manager graphical user interface. The dual-transponder also supports manual data-rate provisioning, diagnostic loopback for testing, optical power monitoring, and other features. These functions facilitate fault location and correction and simplify operations required by service management and service level agreements. WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com/waveready WaveReady WRT-780 2 WRT-780 Dual Multirate WDM Transponder Because of its high density and flexibility, the WRT-780 enables reliable, scalable and cost-effective transport solutions for both CWDM and/or DWDM networks. The easy-to-use WRT-780 transponder combined with the plug-and-play features of the WaveReady platform makes the turn-up of new services easy and simplifies equipment management. GigE GigE GigE WRT-780 WRT-780 GigE CWDM FC FC FC WRT-780 WRT-780 FC Where extended reach is required, the WRT-780 can be combined with WaveReady DWDM amplifiers and dispersion compensation modules to provide a dense and compact DWDM transport solution. OC-48 OC-48 OC-48 WRT-780 WRA2 WRA2 WRT-780 OC-48 DWDM GigE GigE GigE WRT-780 WRT-780 GigE With the growing need to have storage area networks (SANs) extended over long distances to support enterprise connectivity or disaster and recovery solutions, the WRT-780 can be combined with the WaveReady WDM platform to offer a simple, reliable, and cost-effective SAN transport solution. 4.25 Gb/s 4.25 Gb/s 4.25 Gb/s WRT-780 Dual Transponder SAN Extension over DWDM WRT-780 Dual Transponder 4.25 Gb/s SAN Switches SAN Switches 4.25 Gb/s 4.25 Gb/s SAN Switches 4.25 Gb/s WRT-780 Dual Transponder WRT-780 Dual Transponder 4.25 Gb/s SAN Switches WaveReady WRT-780 3 The following table lists data rates that the WRT-780 supports: Protocol Bit Rate (Mb/s) Fast Ethernet SONET OC-3/SDH STM-1 ESCON Ficon/Fibre Channel 25FC Ficon/Fibre Channel FC50 SONET OC-12/SDH STM-4 Ficon/Fibre Channel FC100 Gigabit Ethernet HD-SDI SMPTE 292M Ficon/Fibre Channel FC200 SONET OC-48/SDH STM-16 SONET OC-48 FEC (G.709 OTU1) IEEE802.3 10GBaseLX4 Ficon/Fibre Channel FC400 125 155.52 200 265.63 531.25 622.08 1062.5 1250 1485 2125 2488.32 2666.06 3125 4250 WaveReady WRT-780 4 Electrical Specifications1 Parameter Minimum Typical Maximum DC supply voltage Power dissipation Alarm relay signals -- -48 V -- -- 10 W 16 W2 Dry contact major and minor alarms. Relay open under normal operation. Relay closed when power is off. 1. Electrical specifications assume installation in a WaveReady 3500F shelf (DMS-3500FSE03). 2. Assumes 4 DWDM SFPs are installed in the WRT-780. Physical Specifications Parameter Size (H x W x L) Weight (approximate) Typical 17.5 x 2.5 x 22.3 cm (6.8 x 1 x 8.8 in) 1.4 kg (3.1 lbs) Environmental Specifications Parameter Minimum Typical Maximum Normal operating temperature Extended operating temperature Storage temperature Relative humidity (non-condensing) 0C -5C -40C 5% -- -- -- -- 40C 55C 85C 90% Interface Specifications Interface Description Optical Craft LC/PC on all ports Requires WaveReady 3100 or 3500F series shelf and a WaveReady COM200 communications module. Craft access through RS-232/DB-9 connector on front panel of COM200 module. Requires WaveReady 3500F series shelf and a WaveReady COM200 communications module. TL1/SNMP interfaces via the 10/100BaseT Ethernet/RJ45 connector on the front panel of a COM200. Seven LEDs: CARD (power); MAJ/CRIT (major/critical alarm); MIN (minor alarm); PORT 1-1 (port status); PORT 1-2 (port status); PORT 2-1 (port status); PORT 2-2 (port status) TL1/SNMP Front panel WaveReady WRT-780 5 Supported Client SFPs Description Part Number Bit-Rate (Mb/s) SFP Transceiver, Dual speed (10/100/1000BaseT) Copper, 100 m SFP Transceiver, Multirate (155-2700 Mb/s) with DDM, 1310 nm, 5-10 km SFP Transceiver, Multirate (155-2700 Mb/s) with DDM, 1310 nm, 20-30 km SFP Transceiver, Dual rate (1062, 1250 Mb/s) with DDM, 1310 nm, 10 km SFP Transceiver, Tri rate (1062, 2125, 4250 Mb/s) with DDM, 1310 nm, 20 km SFP Transceiver, Tri rate (1062, 1250, 2125 Mb/s) with DDM, 850 nm Multimode SFP Transceiver, Tri rate (1062, 2125, 4250 Mb/s) SFP with DDM, 850 nm Multimode WRT-SFPBT1000SC Reach Receiver Sensitivity3 (dBm) 12.5, 125, 1250 N/A 100 m N/A WRT-SFPS24SC1310 155-2667 -9.5 10 km 5 km -22 (GigE) -18 (OC-48) WRT-SFPS24SCIR1 155-2667 -5 30 km 20 km -22 (GigE) -18 (OC-48) WRT-SFPS10SC1310 1062-1250 -9.5 10 km -19 (GigE) -21 (1 Gb/s) WRT-SFPS42SC1310 1062-4250 -8.4 WRT-SFPM20SC0850 1062-2125 -9.5 28 km -19 (1 Gb/s) 20 km -16.2 (4.25 Gb/s) 0.5-500 m4 -17 (1 Gb/s) WRT-SFPM42SC0850 1062-4250 -9 0.5-500 m 3. Values quoted are for worst-case extinction ratio and BER of 1 x 10-10. 4. Depends on the fiber type and data rate. Launch Power (dBm) -15.0 (2 Gb/s) -17 (1 Gb/s) -14 (4.25 Gb/s) WaveReady WRT-780 6 Supported CWDM SFPs Description Part Number Bit-Rate (Mb/s) Launch Power (dBm) Reach (km) Receiver Sensitivity (dBm) SFP Transceiver, Multirate (125-2700 Mb/s) with DDM, CWDM, 80 km (See CWDM table for wavelength) SFP Transceiver, Tri-rate (1062, 2125, 4250 Mb/s) with DDM, CWDM, 30-50 km (See CWDM table for wavelength) WRT-SFPL3C24SC-0YY 125-2667 0 80 -285 WRT-SFPI3C42SC-0YY6 1062-4250 1 50 50 30 -16.5 (1 Gb/s)7 -17.6 (2 Gb/s) -14.7 (4.25 Gb/s) 5. Dispersion penalty of 2.5 dB. 6. YY indicate the CWDM Channel as per CWDM Channel table. 7. Dispersion penalty of 2 dB (2 Gb/s) and 3 dB (4.25 Gb/s). Supported DWDM SFPs Description Part Number Bit-Rate (Mb/s) Launch Power (dBm) Reach8 (km) Receiver Sensitivity (dBm) SFP Transceiver, Multirate (125-2700 Mb/s) with DDM, DWDM, 120 km (See DWDM table for wavelength) SFP Transceiver, Tri rate (1062, 2125, 4250 Mb/s) with DDM, DWDM, 80-120 km (See DWDM table for wavelength) WRT-SFPL3T24SC-0XX 125-2667 0 120 -289 2 120 80 -28 (2 Gb/s)11 -23 (4 G FC) 8. 9. 10. 11. WRT-SFPL3T42SC-0XX10 1062-4250 Reach in this case is specified as per the dispersion reach assuming a worst case of 20 ps/km. Dispersion penalty of 3 dB. XX indicates the DWDM Channel as per the DWDM Channel table. Dispersion penalty of 3 dB. WaveReady WRT-780 7 CWDM SFPs support the following wavelengths (). The channel number is used in the part number suffix YY. For example, a 2.5 Gb/s CWDM SFP using wavelength 1590 nm would be WRT-SFPL3C24SC-059. Channel Number Wavelength (nm) 47 49 51 53 55 57 59 61 1470 1490 1510 1530 1550 1570 1590 1610 DWDM SFPs support the following ITU frequencies and wavelengths (). The ITU channel number is used in the part number suffix XX. For example, the part number for a 2.5 Gb/s DWDM SFP using wavelength 1529.55 nm is WRT-SFPL3T24SC-060. ITU Number Frequency (THz) Wavelength (nm) ITU Number Frequency (THz) Wavelength (nm) ITU Number Frequency (THz) Wavelength (nm) 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 196.00 195.90 195.80 195.70 195.60 195.50 195.40 195.30 195.20 195.10 195.00 194.90 194.80 194.70 194.60 1529.55 1530.33 1531.12 1531.90 1532.68 1533.47 1534.25 1535.04 1535.82 1536.61 1537.40 1538.19 1538.98 1539.77 1540.56 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 194.50 194.40 194.30 194.20 194.10 194.00 193.90 193.80 193.70 193.60 193.50 193.40 193.30 193.20 193.10 1541.35 1542.14 1542.94 1543.73 1544.53 1545.32 1546.12 1547.92 1547.72 1548.51 1549.32 1550.12 1550.92 1551.72 1552.52 30 29 28 27 26 25 24 23 22 21 20 19 18 193.00 192.90 192.80 192.70 192.60 192.50 192.40 192.30 192.20 192.10 192.00 191.90 191.80 1553.33 1554.13 1554.94 1555.75 1556.55 1557.36 1558.17 1558.98 1559.79 1560.61 1561.42 1562.23 1563.05 WaveReady WRT-780 Product Information For more information on WaveReady or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America, +1 800-5378-JDSU worldwide or via e-mail at sales@jdsu.com. Product Code WRT-780DT000B Description Dual Multirate Transponder (125 Mb/s-4.25 Gb/s) Associated Parts Product Code DMS-3500FSE03 COM-200ET003Y WRA-217C0001B WRA-11X WRT-SFPS24SC1310 WRT-SFPS24SCIR1 WRT-SFPL3C24SC-0xx WRT-SFPI3C42SC-0xx WRT-SFPL3T24SC-0xx WRT-SFPL3T42SC-0xx WRT-SFPM42SC0850 WRT-SFPM20SC0850 WRT-SFPS42SC1310 WRT-SFPS10SC1310 WRT-SFPBT1000SC Description WR3500F Shelf COM200 Communication module Multichannel C-Band Optical Amplifier, +17 dBm Single Channel, Optical Amplifier (+10 dBm up to +19 dBm) SFP Transceiver, Multirate (155-2700 Mb/s) with DDM, 1310 nm, 5-10 km SFP Transceiver, Multirate (155-2700 Mb/s) with DDM, 1310 nm, 20-30 km SFP Transceiver, Multirate (125-2700 Mb/s) with DDM, CWDM, 80 km SFP Transceiver, Dual rate (2125, 4250 Mb/s) with DDM, CWDM, 30-50 km SFP Transceiver, Multirate (125-2700 Mb/s) with DDM, DWDM, 120 km SFP Transceiver, Tri rate (1062, 2125, 4250 Mb/s) with DDM, DWDM, 80-120 km SFP Transceiver, Tri rate (1062, 2125, 4250 Mb/s) SFP with DDM, 850 nm Multimode SFP Transceiver, Tri rate (1062, 1250, 2125 Mb/s) with DDM, 850 nm Multimode SFP Transceiver, Tri rate (1062, 2125, 4250 Mb/s) with DDM, 1310 nm, 20 km SFP Transceiver, Dual rate (1062, 1250 Mb/s) with DDM, 1310 nm, 10 km SFP Transceiver, Dual speed (100/1000BaseT) Copper, 100 m NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU Product specifications and descriptions in this document subject to change without notice. (c) 2008 JDS Uniphase Corporation WEBSITE : www.jdsu.com/waveready December 2008 30149315 001 1208 WRT780.DS.CMS.TM.AE