PL IA N T Features M Compact design, long life and high *R oH S CO reliability Vertical and horizontal mount versions Momentary switch Dual LED design Flatted and knurled shaft styles Bushing and bushingless options PEL12D - 12 mm Encoder with Switch and Illuminated Shaft Electrical Characteristics Output .....................................................................................................................................................................................2-bit quadrature code Closed Circuit Resistance ........................................................................................................................................................... 3 ohms maximum Contact Rating .............................................................................................................................................................................. 0.5 mA @ 5 VDC Insulation Resistance ....................................................................................................................................................100 megohms @ 250 VDC Dielectric Withstanding Voltage Sea Level ................................................................................................................................................................................ 300 VAC minimum Electrical Travel ......................................................................................................................................................................................Continuous Contact Bounce (15 RPM).........................................................................................................................................................2.0 ms. maximum** RPM (Operating) ............................................................................................................................................................................ 100 maximum** Environmental Characteristics Operating Temperature Range .......................................................................................................................-10 C to +70 C (+14 F to +158 F) Storage Temperature Range .......................................................................................................................... -40 C to +85 C (-40 F to +185 F) Operating Humidity ..................................................................................................................................................................... 25 % to 85 % R.H. Rotational Life..................................................................................................................................................................... 30,000 cycles minimum Switch Life .......................................................................................................................................................................... 20,000 cycles minimum IP Rating ...........................................................................................................................................................................................................IP 40 Mechanical Characteristics Mechanical Angle .......................................................................................................................................................................... 360 continuous Detent Torque ..................................................................................................................................................30 to 200 g-cm (0.42 to 2.77 oz.-in.) Running Torque ..................................................................................................................................................... 50 g-cm (0.69 oz.-in.) maximum Shaft Strength (Push) ...................................................................................................................................................................... 5 kgf (11.0 lbs.) Shaft Strength (Pull) ...................................................................................................................................................................... 10 kgf (22.0 lbs.) Weight ............................................................................................................................................................................... 3 gm (0.1 oz.) maximum Terminals .................................................................................................................................................................. Printed circuit board terminals Soldering Condition Wave Soldering ..................................................................... Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 C max. for 5 1 seconds Hand Soldering .................................................................................................................................................................. Not recommended Hardware ................................................................................... One flat washer and one mounting nut supplied with each encoder with bushing Switch Characteristics Switch Type .....................................................................................................................................................Contact Push ON Momentary SPST Power Rating (Resistive Load) ...................................................................................................................................................... 10 mA at 5 V DC Contact Resistance ............................................................................................................................................................................100 milliohms Switch Travel .................................................................................................................................................................................0.5 +0.0/-0.3 mm Switch Actuation Force .................................................................................................................................................450 200 gf (15.9 7.0 oz.) How To Order PEL12D - 4 0 21 F - S 1 024 Model Terminal Configuration 2 = Vertical Mount/Side Exit PC Pin 4 = Horizontal Mount/Rear Exit PC Pin Detent Option 0 = No Detents 2 = 24 Detents Standard Shaft Length Flatted: Knurled: 16 = 16.0 mm 26 = 26.0 mm 25 = 25.0 mm 18 = 18.5 mm 31 = 31.0 mm 21 = 21.0 mm Shaft Style F = Insulated Flatted Shaft S = Insulated Knurled Shaft (18 Teeth) G = Insulated Flatted Shaft w/Bushing*** T = Insulated Knurled Shaft (18 Teeth) w/Bushing Switch Configuration S = Push Momentary Switch LED Color Dual: 1 = Blue/Orange 2 = Green/Red 3 = Blue/Green Resolution 024 = 24 Pulses per 360 Rotation *** Available in 18.5, 21 and 26 mm shaft lengths *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. **Devices are tested using standard noise reduction filters. For optimum performance, designers should use noise reduction filters in their circuits. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Applications Level control, tuning and timer settings in: Audio-visual equipment Consumer electric appliances Musical instrumentation Communications equipment PEL12D - 12 mm Encoder with Switch and Illuminated Shaft Product Dimensions PEL12D-4xxxS-Sxxxx (Horizontal Mount w/Dual LED & Switch, Knurled Shaft) MOUNTING SURFACE 25.0 (.984) 7.0 (.276) 4 PLCS. 0.8 (.031) 0.3 (.012) 2.9 (.114) 14.0 (.551) 18.0 (.709) 5.0 (.197) 0.8 (.031) 13.2 0.1 (.520 .004) 12.4 (.488) 7.0 (.276) SWITCH STROKE 0.5 +0/-0.3 (.020 +0/-.012) 6.0 0.1 (.236 .004) 2.0 0.1 (.079 .004) 8.2 (.323) 1.0 +0.2/-0 (.039 +.008/-0) DIA. 4 PLCS. 4 7.0 0.1 (.276 .004) 2.0 0.1 (.079 .004) 18 TEETH 0.3 (.012) 2.8 (.110) 2 2 PLCS. 2.1 +0.1/-0 (.083 +.004/-0) 1 13.2 (.520) 10.2 (.402) 7.5 0.1 (.295 .004) 6.0 (.236) DIA. 6.8 DIA. (.268) 3 A C 2.0 +0.1/-0 (.079 +.004/-0) 2 PLCS. B A C 5.0 0.1 (.197 .004) 5.0 (.197) B 1.1 +0.2/-0 (.043 +.008/-0) DIA. 3 PLCS. PEL12D-4xxxF-Sxxxx (Horizontal Mount w/Dual LED & Switch, Flatted Shaft) MOUNTING SURFACE LM 7.0 (.276) 0.3 (.012) 2.9 (.114) 0.8 (.031) L1 1.5 5.0 (.197) (.591) SWITCH STROKE 0.5 +0/-0.3 (.020 +0/-.012) 14.0 (.551) L1 LM 12.4 (.488) 3 (.118) 16 (.630) 5 (.197) 18.5 (.728) 7 (.276) 21 (.827) 12 (.472) 26 (1.024) 12 (.472) 31 (1.220) 8.2 (.323) 0.5 (.020) 2.0 0.1 (.079 .004) 13.2 (.520) 10.2 (.402) 0.3 (.012) 2.8 (.110) 6.8 (.268) DIA. 4.5 0.05 (.177 .002) DIA. 6.0 0.1 (.236 .004) A C B 5.0 (.197) DIMENSIONS: Dual LED Circuit UNDER MM (INCHES) TOLERANCES: 10.0 0.3 10.0 ~ 100 0.5 = = (.394) (.012) (.394 ~ 3.937) (.020) 4 (+) 3 (+) 2 (-) 1 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. PEL12D - 12 mm Encoder with Switch and Illuminated Shaft Product Dimensions PEL12D-2xxxS-Sxxxx (Vertical Mount w/Dual LED & Switch, Knurled Shaft) MOUNTING SURFACE 25.0 (.984) 7.0 (.276) 2.5 (.098) 18.0 (.709) 5.0 (.197) 0.8 (.031) 7.0 (.276) SWITCH STROKE 0.5 +0/-0.3 (.020 +0/-.012) 18 TEETH 10.0 (.394) 4 PLCS. 0.8 (.031) 4.5 0.1 (.177 .004) 12.4 (.488) 3.1 0.1 (.122 .004) 2.0 +0.1/-0 (.079 +.004/-0) 2 PLCS. 8.2 (.315) 6.0 0.1 (.236 .004) 13.2 (.520) 10.2 (.402) 1.0 +0.2/-0 (.039 +.008/-0) DIA. 4 PLCS. 3 2 6.0 (.236) DIA. 6.8 DIA. (.268) 5.0 0.1 (.197 .004) B 4 10.8 0.1 (.425 .004) C A 1 1.1 +0.2/-0 (.043 +.008/-0) DIA. 3 PLCS. 2.0 0.1 (.079 .004) 3.5 (.138) A C B 2.0 +0.1/-0 (.079 +.004/-0) 2 PLCS. 10.0 (.394) 2.0 (.079) 2.1 +0.1/-0 (.083 +.004/-0) 2 PLCS. 6.1 (.240) PEL12D-2xxxF-Sxxxx (Vertical Mount w/Dual LED & Switch, Flatted Shaft) MOUNTING SURFACE LM 7.0 (.276) 2.5 (.098) 12.4 (.488) L1 1.5 5.0 (.197) (.591) 0.8 (.031) SWITCH STROKE 0.5 +0/-0.3 (.020 +0/-.012) 8.2 (.315) 0.5 (.020) 13.2 (.520) 10.2 (.402) 10.0 (.394) 6.8 (.268) DIA. 4.5 0.05 (.177 .002) DIA. 6.0 0.1 (.236 .004) 3.5 (.138) 2.0 (.079) A C L1 LM 3 (.118) 16 (.630) 5 (.197) 18.5 (.728) 7 (.276) 21 (.827) 12 (.472) 26 (1.024) 12 (.472) 31 (1.220) B 10.0 (.394) 6.1 (.240) DIMENSIONS: UNDER MM (INCHES) TOLERANCES: 10.0 0.3 10.0 ~ 100 0.5 = = (.394) (.012) (.394 ~ 3.937) (.020) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. PEL12D - 12 mm Encoder with Switch and Illuminated Shaft Product Dimensions Quadrature Output Table CW PEL12D-4xxxT-Sxxxx (Horizontal Mount w/Dual LED & Switch, Knurled Shaft w/Bushing) 25.0 (.984) 7.5 (.295) OFF 17.5 (.689) 7.0 (.276) A Signal 7.0 (.276) 0.3 (.012) ON B Signal D CCW 18 TEETH M9 X Suggested Filter Circuit 6.0 DIA. (.236) 0.75 (.030) 5 VDC PEL12D-4xxxG-Sxxxx (Horizontal Mount w/Dual LED & Switch, Flatted Shaft w/Bushing) 10K OHMS 10K OHMS LM L2 L1 LM TERMINAL A 5 (.197) 11 (.433) 18.5 (.728) 0.01 F 7 (.276) 13.5 (.532) 21 (.827) 12 (.472) 18.5 (.728) 26 (1.024) L1 5.0 (.199) L2 0.75 M9 X (.030) DIMENSIONS: UNDER 10K OHMS MM (INCHES) TOLERANCES: 10.0 0.3 10.0 ~ 100 0.5 = = (.394) (.012) (.394 ~ 3.937) (.020) 10K OHMS TERMINAL B 0.01 F ENCODER TERMINAL C LED Terminal Decoder Code Color Terminals 1 Blue / Orange 2 Green / Red 3 Blue / Green / / / LED Characteristics (Dual) Power Dissipation (mW) DC Forward Current (mA) Typ. Max. Blue/ Orange Blue 105 30 3.3 4.0 Orange 75 30 2.1 2.5 Green/ Red Green 120 30 3.2 4.0 Red 75 30 1.95 2.5 Blue/ Green Blue 120 30 3.3 4.0 Green 120 30 3.2 4.0 Red/ Green Red 75 30 1.95 2.5 Green 120 30 3.2 4.0 LED Color Notes: Reverse Current: 10 A Reverse Voltage: 5 VDC Test Condition (IF): 20 mA Forward Voltage (V) Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com REV. 03/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.