DC/DC Converters TES 1V Series, 1 Watt Features Small SMD package with standard footprint I/O isolation voltage 3000 VDC Unregulated device Single- and dual output models High efficiency up to 80% Operating temperature range -40C to +85C High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D Available in tape and reel package 3-year product warranty The TES-1V series are miniature, 1W DC/DC-converters with high isolation in a SMD package. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Output voltage Output current max. Efficiency typ. TES 1-0510V Order code 3.3 VDC 260 mA 72 % TES 1-0511V 5.0 VDC 200 mA 75 % 12 VDC 84 mA 79 % 15 VDC 67 mA 80 % TES 1-0512V TES 1-0513V TES 1-0521V Input voltage 5 VDC 10% (nominal 5 VDC) 5 VDC 100 mA 75 % TES 1-0522V 12 VDC 42 mA 79 % TES 1-0523V 15 VDC 34 mA 80 % TES 1-1210V 3.3 VDC 260 mA 73 % TES 1-1211V 5.0 VDC 200 mA 76 % TES 1-1212V 12 VDC 84 mA 80 % 15 VDC 67 mA 81 % 5 VDC 100 mA 76 % TES 1-1222V 12 VDC 42 mA 80 % TES 1-1223V 15 VDC 34 mA 80 % TES 1-2410V 3.3 VDC 260 mA 70 % TES 1-2411V 5.0 VDC 200 mA 73 % 12 VDC 84 mA 79 % 15 VDC 67 mA 79 % TES 1-1213V TES 1-1221V TES 1-2412V TES 1-2413V TES 1-2421V 12 VDC 10% (nominal 12 VDC) 24 VDC 10% (nominal 24 VDC) 5 VDC 100 mA 73 % TES 1-2422V 12 VDC 42 mA 79 % TES 1-2423V 15 VDC 34 mA 79 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TES 1V Series 1 Watt Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 15 mA / 110 mA typ. 24 Vin models: 8 mA / 55 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reverse voltage protection 0.3 A max. Input filter internal capacitor Output Specifications Voltage set accuracy see graphs below Voltage balance (dual output models, balanced load) 1.0 % max. Regulation - Input variation 1.2 % / 1 % change Vin - Load variation see graphs below Ripple and noise (20 MHz Bandwidth) 100 mVpp max. Temperature coefficient 0.02 %/K max. Short circuit protection limited 0.5 sec. max. Capacitive load 3.3 & 5.0 12 & 15 5.0 12 & 15 VDC VDC VDC VDC models: models: models: models: 33 F max. 4.7 F max. 10 F max. 2.2 F max. General Specifications Temperature ranges - Operating -40C to +85C - Storage -40C to +125C - Case +95C max. Derating (convection cooling) 4 %/K above +75C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >2 Mio h I/O isolation voltage (60 sec.) 3000 VDC I/O isolation capacitance (100 kHz, 1 V) 60 pF typ. I/O isolation resistance (500 VDC) >10 Gohm Switching frequency 50 to 150 kHz (depending on load) Output voltage variation dependent on load (at nominal input voltage) other models: +20% +15% +10% +5% max. 0% typ. min. -5% -10% 0 20% 40% 60% Output Load 80% 100% Deviation of Vout nom. Deviation of Vout nom. 3.3 & 5.0 VDC models: +20% +15% +10% +5% max. 0% typ. min. -5% -10% 0 20% 40% 60% Output Load 80% 100% All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 1V Series 1 Watt Physical Specifications Casing material non-conductive plastic (UL 94V-0 rated) Weight 2.0 g (0.07oz) Lead-free reflow solder process as per J-STD-020D.1 (to find at: www.jedec.org - free registration rqueired) Moisture sensitivity level (MSL) level 2 as per J-STD-033B.1 (to find at: www.jedec.org - free registration required) Washing process not recommended. Product non-hermetical Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Supporting documents: www.tracopower.com/overview/tes1v Outline Dimensions 1.8 2.54 2.54 (0.07) (0.10) 5.08 (0.10) (0.31) S 8.0 0.33 (0.01) Pin-Out 2.54 (0.20) 5.5 (0.22) 11.0 3.0 0-4 1.5 (0.06) (0.10) 5.5 (0.22) 0.25 (0.43) O1.0 (O 0.04) vent hole (for reflow soldering process) (0.12) 11 10 8 7 8.0 (0.31) 12 3.0 (0.12) Top view 1 2 3 5 6 16.3 (0.64) Pin Single Dual 1 -Vin (GND) -Vin (GND) 2 +Vin +Vin 3 No con. No con. 5 -Vout Common 6 No con. -Vout 7 No con. No con. 8 +Vout +Vout 10 No con. No con. 11 No con. No con. 12 No con. No con. No con. = Pin to be isolated from circuitry Solder pad dimension (0.04) 5.08 (0.20) 12.0 (0.47) 1.9 (0.07) 1.0 Dimensions in [mm], () = Inch Pin pitch tolerances: 0.13 (0.005) Other tolerances: 0.25 (0.01) 2.54 (0.10) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. October 23, 2018 Page 3 of 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TES 1-1222V TES 1-1211V TES 1-0510V TES 1-0511V TES 1-1212V TES 1-1223V TES 1-2413V TES 1-2421V TES 1-1210V TES 1-2412V TES 1-1213V TES 1-2422V TES 1-0521V TES 1-0522V TES 1-1221V TES 1-0513V TES 1-0523V TES 1-2410V TES 1-2411V TES 1-0512V TES 1-2423V