Terminal Blocks BN-W BNH-W Series Touch-down terminal blocks reduce wiring time. (BNH-W/BNDH-W Series) 1. Insert the Crimping Terminal Terminal screw is always in the open position. No need to loosen the screw. 2. Push the Screw Down UL recognized, CSA certified, and TUV compliant. Self-lifting and touch-down terminals available. * See website for details on approvals and standards. Push the screw down to temporarily hold the wire in place. 3. Tighten the Screw The screws can be tightened easily with a pneumatic screwdriver. **Molded from UL94V-0 material with excellent flame and shock resistance. **Terminal blocks can be mounted on a 35-mm-wide DIN rail and 30-mm-wide IEC type C rail. DIN Rail IEC Type C Rail **9.5-mm-wide marking strips can be used on all models. 17-mm-wide sliding type marking strips also available. (BN10W to BN30W) **Terminal blocks of different shapes and capacities can be installed without using an end plate. (BN/BNH10W to BN/BNH30W) **Screw and stud terminals available for large capacity terminal blocks. **Additional mounting and removal of terminals is easy. (BN10W to BN150W) **Complies with JIS C 8201-7-1. **UL recognized, CSA certified, and EN compliant (TUV approved). (Except common terminal) **UL recognized for field wiring (FW2). G-007 For Formore moreinformation, information,visit visit http://asia.idec.com http://eu.idec.com Terminal Blocks BN-W / BNH-W Series Terminal Blocks UL recognized, CSA certified, and TUV compliant. Touch-down terminals reduce wiring time. APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks Relays & Sockets General Ratings Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature Operating Humidity Circuit Protectors 2500V AC, 1 minute 100 M minimum -25 to +55C (no freezing) -25 to +70C (no freezing) 45 to 85% RH (no condensation) Power Supplies LED Illumination Controllers Material Parts Name Housing Bus Bars Terminal Screw Spring Operator Interfaces Material Modified PPE Brass (Nickel-plated) Steel (Zinc chrome-plated) Stainless steel (touch-down type only) Sensors AUTO-ID Ratings/Terminal Screw Tightening Torque Part No. Style Standard Large Capacity With Disconnecting Switch With Fuse Double-Deck Common Terminal Self-Lifting Touch-Down BN10W BNH10W BN15MW BNH15MW BN15LW BNH15LW BN15MWT BNH15MWT BN15LWT BNH15LWT BN30W BNH30W BN40W BNH40W BN50W BNH50W BN75W BN100W BN150W BN150NW BN200BW, BN200NW BN300BW, BN300NW BN400BW, BN400NW BN500BW, BN500NW BN600NWK BNT20 -- BNF10S BNF10N BND15W BND15LW BND15WT BN15MC -- -- BNDH15W BNDH15LW BNDH15WT -- BN UL/CSA Ratings Voltage/ Wire Size Current (AWG) 600V/15A 22-16 600V/15A 22-14 600V/20A 22-14 600V/15A 22-14 600V/30A 22-14 600V/35A 18-10 600V/40A 16-8 600V/60A 16-6 600V/80A 16-4 600V/100A 16-2 600V/150A 16-1/0 600V/150A 16-1/0 600V/200A 4/0 600V/310A 300MCM 600V/350A 400MCM 600V/500A 500MCM 600V/600A 600MCM -- -- -- 600V/10A 600V/15A 600V/15A -- -- -- -- 22-14 22-14 22-14 -- JIS Ratings Voltage/ Wire Size Current (mm2) 800V/16A 1.25 800V/16A 1.25 (2) 2 630V/21A 2 800V/21A 2 630V/30A 3.5 630V/40A 5.5 630V/50A 8 800V/70A 14 1000V/94A 22 1000V/132A 38 1000V/175A 60 630V/175A 60 800V/240A 100 800V/310A 150 800V/370A 200 800V/430A 250 800V/520A 325 M3 M3 M3.5 M3.5 M4 M4 M5 M5 M6 M8 M8 M8 M10 M10 M12 M16 M16 -- 600V/20A 5.5 M4 -- 600V/10A 600V/10A 800V/16A 800V/21A 800V/21A 600V/16A 5.5 5.5 1.25 (2) 2 2 2 M4 M4 M3 M3.5 M3.5 EN Ratings (1) Voltage/ Wire Size Current [mm2/(AWG)] 660V/16A 1.25/(22-16) 660V/22A 2/(22-14) 660V/22A 2/(22-14) 660V/22A 2/(22-14) 660V/22A 3.5/(22-14) 660V/38A 5.5/(18-10) 660V/50A 8/(16-8) 660V/67A 14/(16-6) 660V/94A 22/(8-4) 660V/132A 38/(2) 660V/175A 60/(1/0) 660V/175A 60/(1/0) 660V/240A 100/(4/0) 660V/310A 150/(300MCM) 660V/370A 200/(400MCM) 660V/430A 240/(500MCM) 660V/520A 300/(600MCM) -- -- -- 660V/22A 660V/22A 660V/22A -- 2/(22-14) 2/(22-14) 2/(22-14) -- Common Current Terminal Screw 1.25 (2) 2 M3 Tightening Torque (N*m) 0.6 to 1.0 0.6 to 1.0 1.0 to 1.3 1.0 to 1.3 1.4 to 2.0 1.4 to 2.0 2.6 to 3.7 2.6 to 3.7 3.9 to 5.4 10 to 13.5 10 to 13.5 21 to 28 38 to 49 83 to 116 1.4 to 2.0 1.4 to 2.0 0.6 to 1.0 1.0 to 1.3 1.0 to 1.3 0.6 to 1.0 1: Ratings approved by TUV based on EN60947-7-1. 2: The rated applicable wire size is 1.25 mm2, but 2 mm2 wires can also be connected. The wire size in ( ) does not comply with JIS standards. 3: Part No. with is UL recognized for field wiring (FW2). Specify the number of poles in place of . Download Downloadcatalogs catalogsand andCAD CADfrom fromhttp://asia.idec.com/downloads http://eu.idec.com/downloads G-008 BN-W / BNH-W Series Terminal Blocks Terminal Blocks Terminal Blocks Terminal Style Ordering No. Applicable Wire (mm2) Terminal Screw Width (mm) Package Quantity BN10W BN15MW BN15LW BN15MWT BN15LWT BN30W BN40W BN50W BNH10W BNH15MW BNH15LW BNH15MWT BNH15LWT BNH30W BNH40W BNH50W BN10WPN50 BN15MWPN50 BN15LWPN50 BN15MWTPN50 BN15LWTPN50 BN30WPN50 BN40WPN20 BN50WPN20 BNH10WPN50 BNH15MWPN50 BNH15LWPN50 BNH15MWTPN50 BNH15LWTPN50 BNH30WPN50 BNH40WPN20 BNH50WPN20 1.25 1.25 (2) (Note) 2 2 3.5 5.5 8 14 1.25 1.25 (2) (Note) 2 2 3.5 5.5 8 14 M3 M3 M3.5 M3.5 M4 M4 M5 M5 M3 M3 M3.5 M3.5 M4 M4 M5 M5 7 8 10.5 8 10.5 12 14 15.5 7 8 10.5 8 10.5 12 14 15.5 50 50 50 50 50 50 20 20 50 50 50 50 50 50 20 20 BN75W BN100W BN150W BN150NW BN200BW2 BN200BW3 BN200BW4 BN300BW2 BN300BW3 BN300BW4 BN400BW2 BN400BW3 BN400BW4 BN200NW2 BN200NW3 BN200NW4 BN300NW2 BN300NW3 BN300NW4 BN400NW2 BN400NW3 BN400NW4 BN75WPN10 BN100WPN05 BN150WPN05 BN150NWPN05 BN200BW2 BN200BW3 BN200BW4 BN300BW2 BN300BW3 BN300BW4 BN400BW2 BN400BW3 BN400BW4 BN200NW2 BN200NW3 BN200NW4 BN300NW2 BN300NW3 BN300NW4 BN400NW2 BN400NW3 BN400NW4 22 38 60 60 M6 M8 M8 M8 20 26 26 26 10 5 5 5 100 M10 37 1 G-017 150 M10 44 1 G-018 200 M12 57 1 G-019 100 M10 37 1 G-017 150 M10 44 1 G-018 200 M12 57 1 G-019 Part No. Page Standard 16A APEM Switches & Pilot Lights 21A Self-Lifting 1-pole Control Boxes Emergency Stop Switches Enabling Switches 30A 40A 50A 70A 16A Safety Products Explosion Proof 21A Touch-Down 1-pole Terminal Blocks Relays & Sockets Circuit Protectors 1-pole LED Illumination 94A 132A 175A Controllers Operator Interfaces Screw AUTO-ID BN Stud 2-pole 3-pole 4-pole 2-pole 3-pole 4-pole 2-pole 3-pole 4-pole 2-pole 3-pole 4-pole 2-pole 3-pole 4-pole 2-pole 3-pole 4-pole 240A 310A 370A 240A 310A 370A Note The rated applicable wire size is 1.25 mm2, but 2 mm2 wires can also be connected. The wire size in ( ) does not comply with JIS standards. G-009 G-013 G-014 G-012 G-013 G-014 Large Capacity (Rail Mount) Power Supplies Sensors 30A 40A 50A 70A G-012 For Formore moreinformation, information,visit visithttp://asia.idec.com http://eu.idec.com G-015 G-016 BN-W / BNH-W Series Terminal Blocks Terminal Blocks Terminal Blocks Terminal Style Part No. Large Capacity (Surface Mount) 2-pole 3-pole 240A 4-pole 2-pole 3-pole 310A 4-pole Screw 2-pole 3-pole 370A 4-pole 2-pole 3-pole 430A 4-pole 2-pole 3-pole 240A 4-pole 2-pole 3-pole 310A 4-pole 2-pole 3-pole 370A Stud 4-pole 2-pole 3-pole 430A 4-pole 2-pole 3-pole 520A 4-pole Terminal Style Part No. With Disconnecting Switch, Fuse Disconnecting Switch 20A 1-pole With Fuse 10A BN200BW2K BN200BW3K BN200BW4K BN300BW2K BN300BW3K BN300BW4K BN400BW2K BN400BW3K BN400BW4K BN500BW2K BN500BW3K BN500BW4K BN200NW2K BN200NW3K BN200NW4K BN300NW2K BN300NW3K BN300NW4K BN400NW2K BN400NW3K BN400NW4K BN500NW2K BN500NW3K BN500NW4K BN600NW2K BN600NW3K BN600NW4K 1-pole Double-Deck Terminal Block Self-Lifiting 16A 1-pole Touch-Down Self-Lifting 21A 1-pole Touch-Down Self-Lifting 21A 1-pole Touch-Down Common Terminal 4-pole Self-Lifting Type 16A 8-pole (Common Current) 10-pole Ordering No. BN200BW2K BN200BW3K BN200BW4K BN300BW2K BN300BW3K BN300BW4K BN400BW2K BN400BW3K BN400BW4K BN500BW2K BN500BW3K BN500BW4K BN200NW2K BN200NW3K BN200NW4K BN300NW2K BN300NW3K BN300NW4K BN400NW2K BN400NW3K BN400NW4K BN500NW2K BN500NW3K BN500NW4K BN600NW2K BN600NW3K BN600NW4K Ordering No. BNT20 BNF10S- BNF10N- BNT20PN20 BNF10S-APN20 BNF10N-APN20 BND15W BNDH15W BND15LW BNDH15LW BND15WT BNDH15WT BND15WPN25 BNDH15WPN25 BND15LWPN25 BNDH15LWPN25 BND15WTPN25 BNDH15WTPN25 BN15MC4 BN15MC8 BN15MC10 BN15MC4PN10 BN15MC8PN10 BN15MC10PN10 Applicable Wire (mm2) Terminal Screw Width (mm) Package Quantity Page 100 M10 37 1 G-017 APEM 150 M10 44 1 G-018 Switches & Pilot Lights Control Boxes 200 M12 57 1 G-019 250 M16 57 1 G-020 Emergency Stop Switches Enabling Switches Safety Products Explosion Proof 100 M10 37 1 G-017 Terminal Blocks Relays & Sockets 150 M10 44 1 G-018 Circuit Protectors Power Supplies 200 M12 57 1 G-019 LED Illumination Controllers 250 M16 57 Operator Interfaces 1 G-020 Sensors AUTO-ID 325 M16 57 1 Applicable Wire (mm2) Terminal Screw Width (mm) Package Quantity 5.5 M4 15 20 5.5 M4 15 20 1.25 (2) M3 8 25 2 M3.5 8 25 2 M3.5 12 25 G-023 1.25 (2) M3 8 10 G-024 Page BN G-021 G-022 The wire size in ( ) does not comply with JIS standards. The rated applicable wire size is 1.25 mm2, but 2 mm2 wires can also be connected. Specify the fuse rating in place of . 1A: 1, 3A: 3, 5A: 5. Download Downloadcatalogs catalogsand andCAD CADfrom fromhttp://asia.idec.com/downloads http://eu.idec.com/downloads G-010 BN-W / BNH-W Series Terminal Blocks Terminal Blocks Accessories End Plate Rail End Clip Rail Mounting Clip Dust Cover Marking Strip Marking Strip Fastener Sliding Marking Strip Jumper Removal Tool Surface Mount Clip Connecting Rod Connecting Nut -- -- -- -- -- -- -- BN40W, BN50W, BNH40W, BNH50W -- -- -- -- -- BN75W, BN100W, BN150W, BN150NW -- -- -- -- -- -- Rail Mount 240A to 370A BN200BW, BN300BW, BN400BW BN200NW, BN300NW, BN400NW -- -- -- -- -- -- -- -- BN200BWK, BN300BWK, BN400BWK BN200NWK, BN300NWK, BN400NWK BN500BWK, BN500NWK, BN600NWK -- -- -- -- Supplied -- Surface Mount 240A to 520A Supplied Accessories (: Necessary) -- -- -- -- -- -- -- With Disconnecting Switch BNT20 -- -- -- -- -- -- With Fuse BNF10S-A, BNF10N-A -- -- -- -- -- -- -- Double-Deck BND15W, BND15LW, BNDH15W, BNDH15LW, BND15WT, BNDH15WT 1 1 -- -- 2 Common Terminal BN15MC -- -- -- -- -- -- -- When ordering accessories, check if the accessories are necessary by referring to the table. : Necessary : Optional Control Boxes Emergency Stop Switches Enabling Switches Terminal Standard APEM Switches & Pilot Lights Explosion Proof Terminal Blocks Relays & Sockets Circuit Protectors Power Supplies LED Illumination Controllers Operator Interfaces Sensors AUTO-ID Large Capacity Safety Products 16A to 40A Self-Lifting Touch-Down 50A to 70A Self-Lifting Touch-Down Rail Mount 1-Pole 94A to 175A Part No. BN10W, BN15MW, BN15LW, BN15MWT, BN15LWT, BN30W BNH10W, BNH15MW, BNH15LW, BNH15MWT, BNH15LWT, BNH30W 1: Accessory not necessary for surface mounting. 2: Accessory not necessary for rail mounting. Specify the number of poles in place of . G-025 G-026 G-027 Page BN G-011 For Formore moreinformation, information,visit visithttp://asia.idec.com http://eu.idec.com G-028 G-029 BN-W / BNH-W Series Terminal Blocks M3.5 21A BN15LW 38 18 11.3 8 6.7 14.3 10.5 8.5 38 18 BN10WPN50 BN15MWPN50 BN15LWPN50 50 50 50 Weight (Approx.) 6.5g 7.3g 10g M3 16A BNH10W M3 16A BNH15MW Emergency Stop Switches Enabling Switches Safety Products Package Quantity Part No. Switches & Pilot Lights Control Boxes 32.5 32.5 32.5 35When using C Rail:41 23.5 When using C Rail:29.5 10.3 7 5.9 35(When using C Rail:41) 23.5(When using C Rail:29.5) 38 18 35When using C Rail:41 23 5When using C Rail:29.5 Self-Lifting Terminal M3 16A BN15MW APEM Dimensions Ordering No. Standard M3 16A BN10W Terminal Blocks Part No. Explosion Proof Terminal Blocks M3.5 21A BNH15LW Relays & Sockets Circuit Protectors Power Supplies LED Illumination 32.5 BNH15MWPN50 50 50 50 Weight (Approx.) 7.5g 8.2g 11.2g Insulation Voltage Wire Size 1 Rated Current 2 Terminal screw UL/CSA EN 660V 1.25 mm2 22-16 AWG (22-16 AWG) 15A 16A UL/CSA 600V 1.25 mm2 22-14 AWG 16A 15A EN End Plate Dust Cover Marking Strip Marking Strip Fastner DIN Rail/End Clip C Rail/End Clip DIN + C Rail/End Clip JIS 660V 800V 1.25 mm2 2 mm2 (22-14 AWG) (2mm2 max) 22A 16A UL/CSA EN JIS 600V 660V 2 mm2 (22-14 AWG) 22A 630V 22-14 AWG 20A M3 M3 M3.5 1.25-3 (2-3) 2-3.5 2 2 2 0.6 to 1.0 N * m 0.6 to 1.0 N * m 1.0 to 1.3 N * m o3.2 min. Crimping Terminal Dimensions (mm) 3 BNH15LWPN50 1.25-3 Max. No. of Crimping Terminals Tightening Torque JIS 800V 600V Crimping Terminal Accessories 4 BN BNH10WPN50 Standards 5.8 max. 5 max. 2 mm2 21A o3.6 min. o3.2 min. 6.6 max. 3.3 min. Sensors AUTO-ID Package Quantity Ordering No. 1: 2: 3: 4: 14.3 10.5 8.5 38 18 35(When using C Rail:41) 23.5(When using C Rail:29.5) 32.5 38 Specification / Ratings 11.3 8 6.7 38 18 32.5 18 35(When using C Rail:41) 23.5(When using C Rail:29.5) Dimensions Operator Interfaces 10.3 7 5.9 35(When using C Rail:41) 23.5(When using C Rail:29.5) Touch-Down Terminal Controllers 8.5 max. 5 max. 3.3 min. 5 max. 4 min. BNE15W BNC230 PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725 BNM3 Aluminum: BAA1000, Steel: BAP1000/BNL6 Aluminum: BNCA1000/BNL7 Aluminum: BNJA1000/BNL6, BNL7 The wire size in ( ) does not comply with JIS standards. The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. See G-025 for details on accessories. Download catalogs and CAD from http://eu.idec.com/downloads G-012 BN-W / BNH-W Series Terminal Blocks 15.8 12 9.6 38 19.4 14.3 10.5 8.5 38(When using C Rail:44) 25.4(When using C Rail:31.4) Safety Products 38 17.5 Ordering No. BN15MWTPN50 BN15LWTPN50 Terminal Blocks Package Quantity 50 50 50 Weight (Approx.) 7g 10g 15.6g Circuit Protectors Standard Explosion Proof Relays & Sockets Part No. M3.5 21A BNH15MWT BN30WPN50 M4 30A BNH15LWT M4 40A BN30W 35.5 11.3 8 6.7 32.5 Emergency Stop Switches Enabling Switches 38 17.5 M4 30A BN15LWT 35(When using C Rail:41) 23.5(When using C Rail:29.5) Control Boxes Dimensions 35(When using C Rail:41) 23.5(When using C Rail:29.5) Self-Lifting Terminal APEM Switches & Pilot Lights M3.5 21A BN15MWT 32.5 Terminal Blocks Part No. M4 40A BNH30W Power Supplies LED Illumination Controllers 50 50 Weight (Approx.) 8g 11g 16.8g Insulation Voltage Wire Size 1 Rated Current 2 Terminal screw Crimping Terminal EN JIS UL/CSA EN JIS UL/CSA EN JIS 600V 660V 2 mm2 (22-14 AWG) 22A 800V 600V 630V 600V 22-14 AWG 3.5 mm2 18-10 AWG 21A 30A 30A 35A 660V 5.5 mm2 (18-10 AWG) 38A 630V 2 mm2 660V 3.5 mm2 (22-14 AWG) 22A 22-14 AWG 15A M3.5 M4 M4 1.25-3.5 to 2-3.5 1.25-4 to 3.5-4 1.25-4 to 5.5-4 2 2 2 Max. No. of Crimping Terminals Tightening Torque Accessories 4 Crimping Terminal Dimensions (mm) 3 BNH30WPN50 UL/CSA 1.0 to 1.3 N*m 1.4 to 2.0 N*m 8.5 max. 6.6 max. 4.7 max. 3.6 min. o4.2 min. 9.5 max. 4.7 max. 4.3 min. 6 max. End Plate BNE15W BNE30W Dust Cover BNC230 BNC230 Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/725 Marking Strip Fastner DIN Rail/End Clip C Rail/End Clip DIN + C Rail/End Clip 5.5 mm2 1.4 to 2.0 N * m o4.3 min. o3.6 min. G-013 35.5 BNH15LWTPN50 50 Standards Specification / Ratings 32.5 BNH15MWTPN50 Package Quantity Ordering No. 1: 2: 3: 4: 15.8 12 9.6 38 19.4 38(When using C Rail:44) 25.4(When using C Rail:31.4) BN 14.3 10.5 8.5 38 17.5 11.3 8 6.7 38 17.5 35(When using C Rail:41) 23.5(When using C Rail:29.5) AUTO-ID Dimensions 32.5 Sensors 35(When using C Rail:41) 23.5(When using C Rail:29.5) Touch-Down Terminal Operator Interfaces BNM3 Aluminum: BAA1000, Steel: BAP1000/BNL6 Aluminum: BNCA1000/BNL7 Aluminum: BNJA1000/BNL6, BNL7 The wire size in ( ) does not comply with JIS standards. The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. See G-025 for details on accessories. For more information, visit http://eu.idec.com 4.5 min. 40A BN-W / BNH-W Series Terminal Blocks M5 APEM 48 24.4 17.8 14 12 50A BNH40W 34.3 28.3 Emergency Stop Switches Enabling Switches Explosion Proof BN50WPN20 20 25.4g 70A BNH50W M5 Switches & Pilot Lights Safety Products BN40WPN20 20 25g Part No. 18 15.5 13 Control Boxes When using 35mm DIN Rail:44 When using C Rail:50 42.5 34.4 28.4 When using 35mm DIN Rail:44 When using C Rail:50 42.5 Self-Lifting Terminal 70A BN50W M5 43 22.4 Dimensions Ordering No. Package Quantity Weight (Approx.) Standard 50A BN40W Terminal Blocks Part No. Terminal Blocks Relays & Sockets M5 Circuit Protectors Power Supplies LED Illumination Operator Interfaces 48 24.4 Standards Insulation Voltage Wire Size 1 Rated Current 2 Terminal screw Crimping Terminal Max. No. of Crimping Terminals Tightening Torque Accessories 4 Sensors UL/CSA 600V 16-8 AWG 40A EN 660V 8 mm2 (16-8 AWG) 50A M5 1.25-5 to 8-5 2 2.6 to 3.7 N * m 34.3 28.3 When using 35mm DIN Rail:44 When using C Rail:50 42.5 34.4 28.4 BNH40WPN20 20 25g End Plate Dust cover Marking Strip Marking Strip Fastner DIN Rail/End Clip C Rail/End Clip DIN + C Rail/End Clip BN BNH50WPN20 20 29g JIS 630V UL/CSA 600V 8 mm2 16-6 AWG 50A 60A EN 660V 14 mm2 (16-6 AWG) 67A M5 1.25-5 to 14-5 2 2.6 to 3.7 N * m JIS 800V 14 mm2 70A o5.2 min. o5.2 min. Crimping Terminal Dimensions (mm) 3 1: 2: 3: 4: 18 15.5 13 AUTO-ID Ordering No. Package Quantity Weight (Approx.) Specification / Ratings 17.8 14 12 43 22.4 Dimensions When using 35mm DIN Rail:44 When using C Rail:50 42.5 Touch-Down Terminal Controllers 12.8 max. 11.8 max. 6.8 max. BNE40W BNC330 6.3 min. 6.5 max. 4.5 min. BNE50W BNC320 PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/725 BNM3 Aluminum: BAA1000, Steel: BAP1000/BNL6 Aluminum: BAA1000, Steel: BAP1000/BNL8 Aluminum: BNCA1000/BNL7 Aluminum: BNCA1000/BNL8 Aluminum: BNJA1000/BNL6, BNL7 Aluminum: BNJA1000/BNL8 The wire size in ( ) does not comply with JIS standards. The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. See G-025 for details on accessories. Download catalogs and CAD from http://eu.idec.com/downloads G-014 BN-W / BNH-W Series Terminal Blocks Terminal Blocks Part No. 94A BN75W M6 132A BN100W M8 APEM Switches & Pilot Lights 22.5 Terminal Blocks 20 17 LED Illumination 53 Controllers 35 29 Power Supplies 16.7 44.2 (when using BNCA, BNCP: 50) Circuit Protectors 41.5 18.2 26 Relays & Sockets 29.8 26 23 63 33 Dust Cover (BNC420) 50.5 Explosion Proof Dimensions When using 35mm DIN Rail:52 When using C Rail:58 Safety Products Large Capacity Emergency Stop Switches Enabling Switches Screw Terminal Control Boxes BAA1000 Operator Interfaces Sensors Standards Insulation Voltage Specification / Ratings BN BN75WPN10 10 45g Ordering No. Package Quantity Weight (Approx.) AUTO-ID Wire Size Rated Current 1 Terminal screw 2 Crimping Terminal Max. No. of Crimping Terminals Socket Wrench Tightening Torque UL/CSA 600V 16-4 AWG 80A BN100WPN05 5 86g EN 660V 22 mm2 (8-4 AWG) 94A JIS 1000V UL/CSA 600V 22 mm2 16-2 AWG 94A 100A EN 660V 38 mm2 (2AWG) 132A Accessories 5 End Plate Dust Cover Marking Strip Marking Strip Fastner DIN Rail/End Clip Type C Rail/End Clip DIN+Type C Rail/End Clip 38 mm2 132A M6 2-6 to 22-6 2 M8 2-8 to 38-8 2 12.7 mm square drive hexagonal socket 10 (4) 3.9 to 5.4 N * m 12.7 mm square drive hexagonal socket 13 (2) 10 to 13.5 N * m o6.2 min. Crimping Terminal Dimensions (mm) 3 JIS 1000V 8.5 max. o8.5 min. 22.8 max. 16.8 max. 6 min. 11 max. 10 min. BNE75W BNE100W BNC420 BNC520 PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725 BNM3 Aluminum: BAA1000, Steel: BAP1000/BNL8 Aluminum: BNCA1000/BNL8 Aluminum: BNJA1000/BNL8 1: The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. 2: The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the recommended tightening torque. 3: Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. 4: Applicable wrench or screwdriver can be used to tighten screws. 5: See G-025 for details on accessories. G-015 For more information, visit http://eu.idec.com BN-W / BNH-W Series Terminal Blocks 175A BN150W 175A BN150NW M8 Terminal Blocks Part No. M8 APEM Switches & Pilot Lights Emergency Stop Switches Enabling Switches Dimensions Safety Products Explosion Proof 29.8 26 23 Terminal Blocks 74 63 33 29.8 26 23 Relays & Sockets Circuit Protectors Power Supplies 7.5 21.5 LED Illumination Controllers 6 29 35 When using 35mm DIN Rail:52 (When using C Rail:58) 50.5 74 63 33 When using 35mm DIN Rail:52 When using C Rail:58 50.5 Screw Terminal Large Capacity Control Boxes Operator Interfaces 35mm DIN Rail Sensors BN150WPN05 5 88g Ordering No. Packaging Quantity Weight (Approx.) Specification / Ratings Standards Insulation Voltage UL/CSA 600V Wire Size 16-1/0 AWG 150A Rated Current 1 Terminal screw 2 Crimping Terminal Max. No. of Crimping Terminals Socket Wrench Tightening Torque EN 660V 60 mm2 (1/0 AWG) 175A BN150NWPN05 5 95g AUTO-ID JIS 1000V -- -- -- -- JIS 630V 60 mm2 -- -- 60 mm2 175A -- -- 175A M8 M8 2-8 to 60-8 2-8 to 60-8 2 2 12.7 mm square drive hexagonal socket 13 (4) 10 to 13.5 N * m 12.7 mm square drive hexagonal socket 13 (2) 10 to 13.5 N * m BN o8.5 min. Accessories 5 Crimping Terminal Dimensions (mm) 3 22.8 max. 11 max. End Plate BNE150W Dust Cover BNC520 Marking Strip Marking Strip Fastner DIN Rail/End Clip PVC 1m/BNM7, Fiber glass 1m/BNM9 PVC 25m/BNM725 10 min. PVC 1m/BNM7, Fiber glass 1m/BNM9 PVC 25m/BNM725 BNM3 Aluminum BAA1000, Steel: BAP1000/BNL8 Type C Rail/End Clip Aluminum: BNCA1000/BNL8 DIN+Type C Rail/End Clip Aluminum: BNJA1000/BNL8 1: The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. 2:The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the recommended tightening torque. 3: Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. 4: Applicable wrench or screwdriver can be used for tightening screws. 5: See G-025 for details on accessories. Download catalogs and CAD from http://eu.idec.com/downloads G-016 BN-W / BNH-W Series Terminal Blocks Terminal Blocks Part No. 240A BN200BW BN200BWK M10 240A Surface Mount M10 Panel Cut-out APEM Switches & Pilot Lights Control Boxes 100 (2P) 137 (3P) 174 (4P) Dimensions 90 (between terminal screws: 46) Hexagonal bolt M10x19 1.5 37 Dust Cover 4 34 34 Package Quantity Weight (Approx.) Large Capacity Circuit Protectors 4 3-o8 Hole 30 46 Explosion Proof Relays & Sockets 33 66.5 65 33 Hexagonal Bolt M10x19 65 66.5 (all rail types) Safety Products 37 78 (2P), 115 (3P), 152 (4P) 90 (between terminal screws: 46) Emergency Stop Switches Enabling Switches Terminal Blocks 78 (2P), 115 (3P), 152 (4P) Dust Cover 15 Screw Terminal 30 4-M6 Screw 1 2P: 430g, 3P: 650g, 4P: 870g Part No. 240A BN200NW 100 (2P), 137 (3P), 174 (4P) 8 8 1 2P: 490g, 3P: 710g, 4P: 930g BN200NWK M10 240A Surface Mount M10 Panel Cut-out 4-M6 Screw Power Supplies 30 LED Illumination Controllers 100 (2P) 137 (3P) 174 (4P) Sensors 90 (between terminal screws: 46) 90 (between terminal screws: 46) 4 78 (2P), 115 (3P), 152 (4P) Bolt M10 Dust Cover 37 33 4 66.5 65 3-o8 Hole 34 34 65 66.5 (all rail types) BN 78 (2P), 115 (3P), 152 (4P) 37 Bolt M10 33 Dust Cover 1.5 AUTO-ID Dimensions 1.5 Stud Terminal Operator Interfaces 30 8 100 (2P), 137 (3P), 174 (4P) 8 46 Package Quantity Weight (Approx.) Specification / Ratings Standards Insulation Voltage Wire Size Rated Current 1 Terminal Screw 2 Crimping Terminal Max. No. of Crimping Terminals Socket Wrench Tightening Torque 1 2P: 500g, 3P: 720g, 4P: 940g UL/CSA 600V 4/0 AWG 200A EN 660V 100 mm2 (4/0 AWG) 240A 1 2P: 560g, 3P: 780g, 4P: 1000g JIS 800V UL/CSA 600V 100 mm2 4/0 AWG 240A 200A EN 660V 100 mm2 (4/0 AWG) 240A JIS 800V 100 mm2 240A M10 M10 5.5-10 to 100-10 5.5-10 to 100-10 2 2 12.7 mm square drive hexagonal socket 17 (2) 21 to 28 N*m 12.7 mm square drive hexagonal socket 17 (2) 21 to 28 N*m o10.5 min. Crimping Terminal Dimensions (mm) 3 Accessories 4 Accessories (Supplied) DIN Rail C Rail DIN+C Rail End Clip 32.8 max. 16 max. 11 min. End Plate, Dust Cover, Marking Strip are supplied. (Note) Marking Strip Fastener (BNM3) is not necessary. Aluminum: BAA1000, Steel: BAP1000 Aluminum: BNCA1000 Aluminum: BNJA1000 BNL8 -- -- -- -- 1: The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. 2:The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the recommended tightening torque. 3:Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. 4: See G-025 for details on accessories. Specify the number of poles in place of . 2-pole: 2, 3-pole: 3, 4-pole: 4. G-017 For more information, visit http://eu.idec.com BN-W / BNH-W Series Terminal Blocks 310A BN300BW BN300BWK M10 310A Terminal Blocks Part no. Surface Mount M10 Panel Cut-out 30 4-M6 Screw Dimensions 1.5 44 Dust Cover 40.5 Switches & Pilot Lights 44 40.5 Hexagonal Bolt M10x22 4 Control Boxes 4 Emergency Stop Switches Enabling Switches 3-o8 Hole 37 75.5 74 Hexagonal Bolt M10x22 APEM 92 (2P), 136 (3P), 180 (4P) Dust Cover 37 74 75.5 (all rail types) Large Capacity 104 (between terminal screws: 50) 92 (2P), 136 (3P), 180 (4P) 104 (between terminal screws: 50) 1.5 Screw Terminal 114 (2P) 158 (3P) 202 (4P) 30 Safety Products 114 (2P), 158 (3P), 202 (4P) 8 8 Explosion Proof 46 Package Quantity Weight (Approx.) 1 2P: 480g, 3P: 750g, 4P: 1020g Part no. 310A BN300NW 1 2P: 540g, 3P: 810g, 4P: 1080g BN300NWK M10 310A Terminal Blocks Surface Mount M10 Panel Cut-out Relays & Sockets Circuit Protectors Power Supplies 4-M6 Screw 30 LED Illumination Controllers Operator Interfaces Sensors Dimensions Dust Cover 1.5 Bolt M10 4 44 40.5 AUTO-ID 4 3-o8 Hole 75.5 74 Bolt M10 44 40.5 92 (2P), 136 (3P), 180 (4P) Dust Cover BN 37 37 74 75.5 (all rail types) 104 (between terminal screws: 50) 92 (2P), 136 (3P), 180 (4P) 104 (between terminal screws: 50) 1.5 Stud Terminal 114 (2P) 158 (3P) 202 (4P) 30 114 (2P), 158 (3P), 202 (4P) 8 8 46 Package Quantity Weight (Approx.) Specification / Ratings Standards Insulation Voltage Wire Size Rated Current 1 Terminal Screw 2 Crimping Terminal Max. No. of Crimping Terminals Socket Wrench Tightening Torque 1 2P: 540g, 3P: 810g, 4P: 1080g UL/CSA 600V 300 MCM 310A EN 660V 150 mm2 (300 MCM) 310A 1 2P: 600g,3P: 870g, 4P: 1140g JIS 800V UL/CSA 600V 150 mm2 300 MCM 310A 310A EN 660V 150 mm2 (300 MCM) 310A JIS 800V 150 mm2 310A M10 M10 5.5-10 to 150-10 5.5-10 to 150-10 2 2 12.7 mm square drive hexagonal socket 17 (2) 21 to 28 N*m 12.7 mm square drive hexagonal socket 17 (2) 21 to 28 N*m o10.5 min. Crimping Terminal Dimensions (mm) 3 Accessories 4 Accessories (Supplied) DIN Rail C Rail DIN+C Rail End Clip 39.8 max. 20 max. 11 min. End Plate, Dust Cover, Marking Strip are supplied. (Note) Marking Strip Fastener (BNM3) is not necessary. Aluminum: BAA1000, Steel: BAP1000 Aluminum: BNCA1000 Aluminum: BNJA1000 BNL8 -- -- -- -- 1: The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. 2:The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the recommended tightening torque. 3: Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. 4: See G-025 for details on accessories. Specify the number of poles in place of . 2-pole: 2, 3-pole: 3, 4-pole: 4. Download catalogs and CAD from http://eu.idec.com/downloads G-018 BN-W / BNH-W Series Terminal Blocks Terminal Blocks Part no. 370A BN400BW BN400BWK M12 370A Surface Mount M12 Panel Cut-out 30 4-M6 Screw Switches & Pilot Lights Control Boxes Dimensions Relays & Sockets Circuit Protectors Large Capacity 57 Dust Cover Hexagonal Bolt M12x23 5 Hexagonal Bolt M12x23 57 52 5 3-o8 Hole 38.1 81.5 80 52 119 (2P), 176 (3P), 233 (4P) Dust Cover 38.1 Explosion Proof 119 (2P), 176 (3P), 233 (4P) 80 81.5 (all rail types) Safety Products Terminal Blocks 120 (between terminal screws: 62) 120 (between terminal screws: 62) 1.5 Emergency Stop Switches Enabling Switches 142 (2P) 199 (3P) 256 (4P) 1.5 Screw Terminal APEM 30 142 (2P), 199 (3P), 256 (4P) 8 8 46 Package Quantity Weight (Approx.) 1 2P: 950g, 3P: 1400g, 4P: 1860g Part No. 370A BN400NW 1 2P: 1030g, 3P: 1480g, 4P: 1940g BN400NWK M12 370A Surface Mount M12 Panel Cut-out Power Supplies 4-M6 Screw 30 LED Illumination Controllers 142 (2P) 199 (3P) 256 (4P) Sensors Dimensions 120 (between terminal screws: 62) 120 (between terminal screws: 62) 119 (2P), 176 (3P), 233 (4P) 57 Bolt M12 52 Dust Cover 1.5 AUTO-ID 119 (2P), 176 (3P), 233 (4P) 57 Dust Cover 1.5 Stud Terminal Operator Interfaces Bolt M12 52 5 5 3-o8 Hole 38.1 38.1 81.5 80 81.5 80 BN 30 8 142 (2P), 199 (3P), 256 (4P) 46 Package Quantity Weight (Approx.) Specification / Ratings Standards Insulation Voltage Wire Size Rated Current 1 Terminal Screw 2 Crimping Terminal Max. No. of Crimping Terminals Socket Wrench Tightening Torque 1 2P: 980g, 3P: 1460g, 4P: 1930g UL/CSA 600V 400 MCM 350A EN 660V 200 mm2 (400 MCM) 370A 1 2P: 1060g, 3P: 1540g, 4P: 1990g JIS 800V UL/CSA 600V 200 mm2 400 MCM 370A 350A EN 660V 200 mm2 (400 MCM) 370A M12 M12 14-12 to 200-12 14-12 to 200-12 JIS 800V 200 mm2 370A 2 2 12.7 mm square drive hexagonal socket 19 (2) 38 to 49 N*m 12.7 mm square drive hexagonal socket 19 (2) 38 to 49 N*m o12.5 min. Crimping Terminal Dimensions (mm) 3 Accessories 4 Accessories (Supplied) DIN Rail C Rail DIN+C Rail End Clip 50.8 max. 26 max. 14 min. End Plate, Dust Cover, Marking Strip are supplied. (Note) Marking Strip Fastener (BNM3) is not necessary. Aluminum: BAA1000, Steel: BAP1000 Aluminum: BNCA1000 Aluminum: BNJA1000 BNL8 -- -- -- -- 1: The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. 2:The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the recommended tightening torque. 3: Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. 4: See G-025 for details on accessories. Specify the number of poles in place of . 2-pole: 2, 3-pole: 3, 4-pole: 4. G-019 For more information, visit http://eu.idec.com 8 BN-W / BNH-W Series Terminal Blocks BN500BWK 430A -- Surface Mount M16 Terminal Blocks Part No Panel Cut-out 60 4-o9 APEM Dimensions Switches & Pilot Lights -- 152 (between terminal screws: 62) Control Boxes 119 (2P), 176 (3P), 233 (4P) 57 52 Bolt M16x35 Dust Cover 1.5 Screw Terminal 162 (2P) 219 (3P) 276 (4P) Emergency Stop Switches Enabling Switches 5 Safety Products Large Capacity Surface Mount 42.5 91.5 90 4-o9 Hole 60 80 Package Quantity Weight (Approx.) 162 (2P), 219 (3P), 276 (4P) 8.5 Explosion Proof 8.5 1 2P: 1550g, 3P: 2250g, 4P: 2950g Part No. BN500NWK 430A Surface Mount M16 Terminal Blocks -- -- BN600NWK Relays & Sockets 520A Surface Mount M16 Panel Cut-out Panel Cut-out Power Supplies 4-o9 4-o9 60 60 LED Illumination Controllers 162 (2P) 219 (3P) 276 (4P) Operator Interfaces Sensors Dimensions Dust Cover 5 119 (2P), 176 (3P), 233 (4P) 57 52 Bolt M16 Dust Cover Package Quantity Weight (Approx.) UL/CSA 600V Wire Size 500A 60 80 8.5 8.5 Max. No. of Crimping Terminals 162 (2P), 219 (3P), 276 (4P) 8.5 1 2P: 1650g, 3P: 2400g, 4P: 3150g JIS 800V UL/CSA 600V 250 mm2 600 MCM 430A 600A EN 660V 300 mm2 (600 MCM) 520A M16 Terminal Screw 2 Crimping Terminal Tightening Torque EN 660V 240 mm2 (500 MCM) 430A 500 MCM Rated Current 1 Socket Wrench 162 (2P), 219 (3P), 276 (4P) 8.5 1 2P: 1600g, 3P: 2300g, 4P: 3000g Standards Insulation Voltage BN 43.5 42.5 60 80 5 2-o9 Hole 91.5 90 2-o9 Hole 91.5 90 AUTO-ID 152 (between terminal screws: 62) 119 (2P), 176 (3P), 233 (4P) 57 52 Bolt M16 1.5 152 (between terminal screws: 62) 1.5 Stud Terminal 162 (2P) 219 (3P) 276 (4P) Specification / Ratings Circuit Protectors JIS 800V 325 mm2 520A M16 14-16 to 200-16 325-16 14-16 to 200-16 325-16 2 1 2 1 12.7 mm square drive hexagonal socket 24 (2) 83 to 116 N*m 12.7 mm square drive hexagonal socket 24 (2) 83 to 116 N*m o16.5 min. Crimping Terminal Dimensions (mm) 3 Accessories (Supplied) 4 50.8 max. 26 max. 16 min. End Plate, Dust Cover, Marking Strip are supplied. (Note) Marking Strip Fastener (BNM3) is not necessary. 1: The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. 2:The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the recommended tightening torque. 3: Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. 4: See G-025 for details on accessories. Specify the number of poles in place of . 2-pole: 2, 3-pole: 3, 4-pole: 4. Download Downloadcatalogs catalogsand andCAD CADfrom fromhttp://asia.idec.com/downloads http://eu.idec.com/downloads G-020 BN-W / BNH-W Series Terminal Blocks 17.5 15 13 63 43 Terminal Blocks Relays & Sockets Circuit Protectors Power Supplies LED Illumination Controllers Operator Interfaces Sensors AUTO-ID Fuse Ratings * Rated Voltage: 250V * Rated Current: 1, 3, 5A * Cartridge Fuse: JIS C 6575-2 6.35x31.8 mm or 6.40x30.0 mm * Part No.: BNF10S-1A BNF10S-3A BNF10S-5A * Cartridge used:FGB1 by FUJI Terminal Industry Co., Ltd. Notes: UL/CSA approved products shown below are not supplied with fuses. When UL/CSA approval is required for fuse terminal blocks, use UL/ CSA-rated fuses. * Part No.: BNF10SW * Rated Insulation Voltage: 600V * Rated Current: 10A * Applicable Wire: 18-10 AWG * UL File No.: E78117 * CSA File No.: LR64803 BN Ordering No. Package Quantity Weight (Approx.) Fuse Neon Lamp BNF10N-APN20 20 20 34g 34g Insulation Voltage Wire Size Rated Current Terminal Screw Crimping Terminal Max. No. of Crimping Terminals Tightening Torque 33 27 Notes: * Rated Current: 20A * This terminal block cannot be used as a disconnect switch. * When switching on/off, make sure that voltage is not applied. Notes: Neon lamp turns on when the fuse blows. For the neon lamp to turn on, the volt ages must be from 100 to 250V AC. Fuse Ratings * Rated Voltage: 250V * Rated Current: 1, 3, 5A * Cartridge Fuse: JIS C 6575-2 6.35x31.8mm or 6.40x30.0mm * Part No.: BNF10N-1A BNF10N-3A BNF10N-5A Note: 6.4x30.0mm fuse can also be used. BNF10S-APN20 Standards Specification / Ratings * Internal Connection 17.5 15 13 When using C Rail: 50 42.5 Self-Lifting Terminal with Disconnecting Switch Explosion Proof Self-Lifting Terminal with Fuse Safety Products When using 35mm DIN Rail: 44 63 43 M4 20A BNT20 33 27 33 27 Emergency Stop Switches Enabling Switches When using C Rail: 59.5 52 When using 35mm DIN Rail: 53.5 Control Boxes 17.5 15 13 When using 35mm DIN Rail: 53.5 63 43 Switches & Pilot Lights M4 BNF10N-A (With Lamp) 10A When using C Rail: 59.5 52 Terminal Blocks APEM M4 10A BNF10S-A OFF ON Terminal Screw Terminal Screw Ordering No. Package Quantity Weight (Approx.) JIS 600V 5.5 mm2 10A max. M4 1.25-4 to 5.5-4 BNT20PN20 20 36g JIS 600V 5.5 mm2 20A M4 1.25-4 to 5.5-4 2 2 1.4 to 2.0 N*m 1.4 to 2.0 N*m o4.2 min. Crimping Terminal Dimensions (mm) 11.3 max. Accessories 1 5.2 max. End Plate Dust Cover -- Marking Strip -- DIN Rail/End Clip C Rail/End Clip DIN+C Rail/End Clip 5 min. BNE20 BNC520 PVC 1m/BNM7, Fiber glass 1m/BNM9 PVC 25m/BNM725 Aluminum: BAA1000, Steel: BAP1000 /BNL6 Aluminum: BNCA1000/BNL7 Aluminum: BNJA1000 /BNL6, BNL7 1: See G-025 for details on accessories. G-021 For more information, visit http://eu.idec.com BN-W / BNH-W Series Terminal Blocks 13.5 12 8 6.7 62 38 18 Dimensions M3.5 21A BND15LW 17.3 15.8 10.5 8.5 62 38 18 62.2(When using C Rail: 68) 59.5 42 18.5 61.2(When using C Rail: 67) 58.5 42 18.5 Self-Lifting Terminal M3 16A BND15W Terminal Blocks Part No. Double-Deck Terminal Block BND15WPN25 25 16g Part No. 8.5 10.5 BND15LWPN25 25 23g M3 16A BNDH15W Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks M3.5 21A BNDH15LW Switches & Pilot Lights Control Boxes 6.7 8 Ordering No. Package Quantity Weight (Approx.) APEM Relays & Sockets Circuit Protectors Power Supplies 62 38 18 Specification / Ratings Standards Insulation Voltage UL/CSA 600V Wire Size 22-14 AWG 10A Rated Current 1 Terminal Screw 2 Crimping Terminal EN 660V 2 mm2 (22-14 AWG) 22A Tightening Torque JIS 800V 1.25 mm2 (2 mm2 max) 16A UL/CSA 600V EN 660V 2 mm2 (22-14 AWG) 22A 22-14 AWG 15A M3.5 1.25-3 (2-3) 2-3.5 2 2 0.6 to 1 N*m 1 to 1.3 N*m 6.6 max. Accessories 4 5 max. End Plate Dust Cover Marking Strip Marking Strip Fastener Surface Mounting Clip Connecting Rod/ Connecting Nut DIN Rail/End Clip C Rail/End Clip DIN+C Rail/End Clip JIS 800V 2 mm2 21A o3.6 min. o3.2 min. Crimping Terminal (mm) 3 BN BNDH15LWPN25 25 26g M3 Max. No. of Crimping Terminals Operator Interfaces AUTO-ID 8.5 10.5 BNDH15WPN25 25 17g Controllers Sensors 6.7 8 Ordering No. Package Quantity Weight (Approx.) 17.3 15.8 10.5 8.5 62.2(When using C Rail: 68) 59.5 42 18.5 Dimensions 62 38 18 13.5 12 8 6.7 61.2(When using C Rail: 67) 58.5 42 18.5 Touch-Down Terminal LED Illumination 8.5 max. 3.3 min. 5 max. 4 min. BNDE15W/BNDE15W2 BNDE15LW/BNDE15LW2 Upper Deck: BNC230, Lower Deck: BNC240 PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725 BNM3 BNDL2 Connecting Rod: BNR1, BNR2, Connecting Nut: BNN1 Aluminum: BAA1000, Steel: BAP1000/BNL6 Aluminum: BNCA1000/BNL7 Aluminum: BNJA1000/BNL6, BNL7 1: The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. 2:The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the recommended tightening torque. 3: Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. 4: See G-025 for details on accessories. Download catalogs and CAD from http://eu.idec.com/downloads G-022 BN-W / BNH-W Series Terminal Blocks Terminal Blocks APEM Switches & Pilot Lights Control Boxes Safety Products Explosion Proof Terminal Blocks Relays & Sockets Circuit Protectors Power Supplies 13.5 12 8 6.7 62 38 17.5 Dimensions 6.7 8 Double-Deck Terminal Block Emergency Stop Switches Enabling Switches M3.5 21A BND15WT 61.2(When using C Rail: 67) 58.5 42 18.5 Self-Lifting Terminal Part No. BND15WTPN25 25 17g Ordering No. Package Quantity Weight (Approx.) Part No. M3.5 21A BNDH15WT LED Illumination 6.7 55.5 49.5 AUTO-ID Dimensions 12 8 58.5 Sensors 62 38 18 When using C Rail: 67 Operator Interfaces When using DIN Rail: 61 Touch-Down Terminal Controllers 8 BN BNDH15WTPN25 25 17g Ordering No. Package Quantity Weight (Approx.) Specification / Ratings Standards Insulation Voltage Wire Size Rated Current 1 Terminal Screw Crimping Terminal UL/CSA 600V EN 660V 2mm2 (22-14 AWG) 22A 22-14 AWG 15A 2 mm2 21A M3 1.25-3.5 to 2-3.5 Max. No. of Crimping Terminals Tightening Torque JIS 800V 2 1.0 to 1.3 N*m o3.6 min. Crimping Terminal (mm) 2 6.6 max. Accessories 3 4.7 max. End Plate Dust Cover Marking Strip Marking Strip Fastener Surface Mounting Clip Connecting Rod/ Connecting Nut DIN Rail/End Clip C Rail/End Clip DIN+C Rail/End Clip 3.6 min. BNDE15W/BNDE15W2 Upper Deck: BNC230, Lower Deck: BNC240 PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725 BNM3 BNDL2 Connecting Rod: BNR1, BNR2, Connecting Nut: BNN Aluminum: BAA1000, Steel: BAP1000/BNL6 Aluminum: BNCA1000/BNL7 Aluminum: BNJA1000/BNL6, BNL7 1: The rated current differs according to operating conditions. See "Selecting Terminal Blocks by Current According to JIS Standards" on G-006. 2: Use a CSA certified crimping terminal when using the terminal block as a CSA certified product. 3: See G-025 for details on accessories. G-023 For more information, visit http://eu.idec.com BN-W / BNH-W Series Terminal Blocks BN15MC4 16A (common current) M3 M3 BN15MC8 16A (common current) 4 BN15MC10 16A (common current) 8 Terminal Blocks Part No. No. of Poles M3 10 Shape APEM Terminal Terminal Switches & Pilot Lights Terminal Common Common Terminal Terminal Terminal 37 (4P), 69 (8P),85 (10P) 8 38 18 6.7 Safety Products 23.5 Terminal Blocks 29.5 Jumper side: 24.1 Jumper side: 30.1 Dimensions Emergency Stop Switches Enabling Switches Explosion Proof When using C Rail: 41 32.5 When using 35mm DIN Rail: 35 Common Terminal Self-Lifting Terminal Control Boxes Common Relays & Sockets Circuit Protectors Power Supplies BN15MC4PN10 10 30g Light Gray Ordering No. Package Quantity Weight (Approx.) Color BN15MC8PN10 10 57g Light Gray JIS 600V 1.25 mm2 (2 mm2 max.) 16A/Common Current M3 1.25-3 (2-3) Specification / Ratings Standards Insulation Voltage Wire Size Rated Current Terminal Screw Crimping Terminal Max. No. of Crimping Terminals Tightening Torque BN15MC10PN10 10 70g Light Gray LED Illumination Controllers Operator Interfaces Sensors AUTO-ID BN 2 0.6-1.0 N*m o3.2 min. Accessories 5 Crimping Terminal Dimensions (mm) 6.6 max. 5 max. End Plate Dust Cover Marking Strip Marking Strip Fastener DIN Rail / End Clip C Rail / End Clip DIN+C Rail / End Clip 3.3 min. Supplied BNC230 PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725 BNM3 Aluminum: BAA1000, Steel: BAP1000/BNL6 Aluminum: BNCA1000/BNL7 Aluminum: BNJA1000/BNL6, BNL7 1: The rated applicable wire size is 1.25 mm2, but 2 mm2 wires can also be connected. The wire size in ( ) does not comply with JIS standards. 2: D o not remove the built-in common jumper. Common terminal type terminal blocks cannot be disassembled. 3: Make sure that all terminal screws are tightened to an appropriate tightening torque before power is applied. 4: Specifications are in compliance with JIS C 8201-7-1 except values in ( ). 5: See G-025 for details on accessories. Application Example Features BN15MC4 CPU PLC IN OUT L0 L1 L2 L3 L4 L5 L6 L7 (+) (-) * All terminals are short-circuted by a built-in common jumper. External jumpers are not required. * Accessories (marking strip, cover, and rails) are compatible with standard types. * Common terminal type terminal blocks can be combined with other standard types as they are identical in shape and in size as BN15MW. * Color: Light Gray L 0 t o L 7 : L oad Download catalogs and CAD from http://eu.idec.com/downloads G-024 BN-W / BNH-W Series Terminal Blocks Series Terminal Blocks Accessories (End Plate / Rail) End Plates Used for ends of terminal blocks. Also used to hold the marking strips in place. 63 38 43 38 48 APEM Switches & Pilot Lights 5 Control Boxes BNE15W Emergency Stop Switches Enabling Switches 3 5 BNE20 Explosion Proof Terminal Blocks 5 BNE75W Relays & Sockets 74 Circuit Protectors Part No. Applicable Terminal Blocks BN10W, BNH10W BN15MW, BNH15MW BN15LW, BNH15LW BN15MWT, BNH15MWT BN15LWT, BNH15LWT BNT20, BNF10S, BNF10N BN30W, BNH30W BN40W, BNH40W BN50W, BNH50W BN75W BN100W BN150W, BN150NW BND15W, BND15WT, BNDH15W, BNDH15WT Ordering No. Power Supplies BNE15W BNE15WPN10 BNE20 BNE30W BNE40W BNE50W BNE75W BNE100W BNE150W BNE20PN10 BNE30WPN10 BNE40WPN10 BNE50WPN10 BNE75WPN10 BNE100WPN10 BNE150WPN10 BNDE15W BNDE15WPN10 BNDE15LW BNDE15LWPN10 BND15LW, BNDH15LW BNDE15W2 BNDE15W2PN10 BND15W, BND15WT, BNDH15W, BNDH15WT BNDE15LW2 BNDE15LW2PN10 BND15LW, BNDH15LW LED Illumination Controllers Sensors 5 BNE150W Securing a marking strip with the end plate End Plate AUTO-ID BN End Plate for Securing End Plate BDNE15LW2 Upper deck: 6.8 mm Lower deck: 1.5 mm BNDE15W2 BNDE15LW2 BNDE15W BDNE15LW BNE100W 5 BNE50W BNDE15W2 Upper deck: 5.5 mm Lower deck: 1.5 mm BDNE15LW Upper deck: 5 mm Lower deck: 10.25 mm Safety Products Operator Interfaces 5 62 BNDE15W Upper deck: 5 mm Lower deck: 9 mm 62 63 53 5 BNE40W BNE30W Thickness (mm) Weight (Approx.) 5.0 4g 3.0 5.0 5.0 5.0 5.0 5.0 5.0 Upper deck: 5.0 Lower deck: 9.0 Upper deck: 5.0 Lower deck: 10.25 Upper deck: 5.5 Lower deck: 1.5 Upper deck: 6.8 Lower deck: 1.5 8g 4g 5g 6g 6g 9g 10g Package Quantity 10 5.5g 6g 5.5g 6g Note: BNDE15W2 and BNDE15LW2 are end plates used for securing marking strips at the end of double deck terminal blocks. Rails Rails for mounting terminal blocks. Available in four styles. 1000 mm G-025 8 12.5 12.5 8 12.5 12.5 8 Part No. BNCA1000 BAA1000 BAP1000 BNJA1000 Ordering No. BNCA1000PN10 BAA1000PN10 BAP1000PN10 BNJA1000PN10 BAA:31 BAP:27 BAA BAP Material Aluminum Aluminum Steel Aluminum 2 25 BAA:1.7 BAP:1 7.5 35 15.5 12.5 16 30 BNCA Length 16 30 35 BNJA 1.5 BAA BAP 15 BNCA 5.5 5.5 21.5 5.5 Approvals: IEC60715 JIS C 2812 DIN 35-mm + C30 Rail DIN Rail 35-mm-wide C30 Rail 25 BNJA Weight (Approx.) 260g 200g 320g 340g For more information, visit http://eu.idec.com Package Quantity 10 10 10 10 BN-W / BNH-W Series Terminal Blocks Series Terminal Blocks Accessories (End Clip / Rail Mounting Clip / Dust Cover) End Clips Used to secure the ends of the terminal blocks assembled on the rail. 23.4 24 APEM 45 9 28 12.1 BNL6 (M4 Screw) Tightening torque: 1.1 N*m Note: 32.5 46 14.4 BNL7 (M4 Screw) * Material: Steel * Plating:Trivalent zinc chromate BNL8 (M4 Screw) Slide the end clip onto the DIN rail. Part No. Ordering No. BNL6 BNL7 BNL6PN10 BNL7PN10 BNL8 BNL8PN10 Rails For Terminal Blocks up to BND and BN40 For BN50 and BN75 x x x (2) x (2) For Terminal Blocks BN100 and larger -- -- -- (1) x x BAA, BAP BNCA, BNCP, BNJA BAA, BAP, BNCA, BNCP, BNJA Weight (Approx.) Package Quantity 15.2g 16g 10 10 56g 10 Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks Relays & Sockets 1: Do not use BNL8 because the insulation distance will be insuffiecient if used. 2: We recommend you to use BNL8 for secure hold. Circuit Protectors Rail Mounting Clips Power Supplies Used to raise the DIN rail from the panel surface. LED Illumination 12.5 BNS3 BNC230 Length 1m BNS3 BNS4 54 15 2.6 28 15 15 28 12.5 12.5 Dust Cover 12.5 2-M5 2.6 2-M5 Part No. 30 2-o5.2 25 54 26 15 76.7 30 2-o5.2 25 26 36.7 Ordering No. BNS3PN10 BNS4PN10 Weight (Approx.) 51.3g 76.2g Package Quantity 10 10 * Material: Steel * Plating: Trivalent zinc chromate Width (mm) BNC320 Part No. Operator Interfaces Sensors AUTO-ID BNS4 Material: Polycarbonate BNC330 Controllers BN BNC420 BNC520 Ordering No. BAC820 BNC1000 Terminal Blocks (: No. of Poles) 39.6 BNC230 BNC230PN10 BN10W, BNH10W, BN15MW, BNH15MW, BN15LW, BNH15LW, BN30W, BNH30W, BN15MWT, BNH15MWT, BN15LWT, BNH15LWT 43 49.6 54.6 65 82 96 110 145 BNC330 BNC320 BNC420 BNC520 BAC820 BNC910 BNC1000 BNC930 BNC330PN10 BNC320PN10 BNC420PN10 BNC520PN10 BAC820PN10 BNC910PN10 BNC1000PN10 BNC930PN10 BN40W, BNH40W BN50W, BNH50W BN75W BN150W, BN150NW, BNT20, BN100W BN200BW(K), BN200NW(K) BN300BW(K), BN300NW(K) BN400BW(K), BN400NW(K) BN500BW(K), BN500NW(K), BN600NW(K) BNC930 BNC240 Weight (Approx.) Package Quantity 56g 10 57g 64g 72g 96g 204g 222g 256g 310g 10 10 10 10 10 10 10 10 Dust Covers for Double Deck Terminal Blocks Length 1m Part No. Ordering No. Upper Deck BNC230 BNC230PN10 Lower Deck BNC240 BNC240PN10 Terminal Block BND15W, BNDH15W, BND15LW, BNDH15LW, BND15WT, BNDH15WT Weight (Approx.) Package Quantity 56g 10 15g 10 Download Downloadcatalogs catalogsand andCAD CADfrom fromhttp://asia.idec.com/downloads http://eu.idec.com/downloads G-026 BN-W / BNH-W Series Terminal Blocks Series Terminal Blocks Accessories (Marking Strips / Marking Strip Fastener / Slide Marking Strip) Marking Strips, Marking Strip Fastener Item Marking Strip APEM Switches & Pilot Lights BNM7 BNM9 BNM3 Marking Strip Fastener Control Boxes Emergency Stop Switches Enabling Switches Ordering No. Weight (approx.) Package Quantity BNM7 BNM7PN10 7.2g 10 BNM9 BNM9PN10 6.4g 10 BNM725 BNM725 -- 1 BNM3 BNM3PN50 0.1g 50 Part No. Specification PVC (glossy surface) 1000 mm x 9.5 mm x 0.5 mm Fiber glass (matte surface) 1000 mm x 9.5 mm x 0.5 mm PVC (matte surface) 25 m x 9.5 mm x 0.5 mm **To install the marking strip fastener 9.5mm Safety Products Explosion Proof Terminal Blocks o75mm Relays & Sockets 160mm Circuit Protectors Power Supplies Sliding Marking Strip (BN10W to BN30W) LED Illumination Marking Strip Holder Controllers Operator Interfaces 17-mm-wide marking strip * Both top and bottom sides of the marking strip holder can be used. End plate (Thickness 5 mm) BNES15W BNES30W 17-mm-wide Marking Strip Sensors Terminal Block BN10W to BN15LWT BN30W AUTO-ID Item BN End Plate Marking Strip Marking Strip Holder Dust Cover Note: Part No. BNES15W BNES30W BNM5 BNMH1 BNCS230 Ordering No. BNES15WPN10 BNES30WPN10 BNM5PN10 BNMH1PN10 BNCS230PN10 Terminal Blocks BN10W to BN15LWT BN30W BN10W to BN15LWT BN30W Specification For sliding marking strip For sliding marking strip PVC (Note) 1m 1m Package Quantity 10 10 10 10 10 Length 1000 mm x Width 9.5 mm x Thickness 0.5 mm Installing the Sliding Marking Strip 1.Insert the marking strip into the groove of the top of the marking strip holder. 3.Insert the marking strip holder into the recess of the end plate. 3 Marking Strip Holder 3 Marking Strip Holder Movement * Sliding movement of the marking strip holder Slide Recess When sliding the marking strip holder, slide by holding both edges of the holder. 2 Marking Strip Recess Marking Strip 2.Installing the end plate Attach the end plates to the terminal blocks and secure with end clips. 4 Dust Cover * To lock the marking strip holder Lock 4.Press the dust cover to fit onto the bottom groove of the end plate. 1 End Plate End Clip (BNL6) G-027 For Formore moreinformation, information,visit visithttp://asia.idec.com http://eu.idec.com To lock the marking strip holder, lock by holding both edges of the holder. BN-W / BNH-W Series Terminal Blocks Series Terminal Blocks Accessories (Jumper) Jumpers for 6 Poles (Material: Brass, Plating: Nickel-plated, Insulation: PVC) Part No. Ordering No. Terminal Centers Insulation Ring Terminal BNJ16B BNJ16BPN10 With 7 mm BNJ16FPN10 10 1.4 0.8 Insulation 10 10A 35 (6-pole) 7 5.7 R 1 3.7 .85 BN10W BNH10W 10 1.4 0.8 2.7g With 2 11 BNJ16FBPN10 Ring Terminal Without With 8 mm BNJ26FWPN10 0.8 Insulation Fork Terminal Without 20A 40 (6-pole) 8 R1 6.4 .85 1.4 3.7 0.8 With Without With 10.5 mm BNJ46FPN10 Without 2.8 10.5 4.2 1.4 0.8 With With Operator Interfaces Sensors 10 3.0g BN 10 .2 0.8 1.7 3.2g 9.3 60 (6-pole) 12 30A BN30W BNH30W 10 1.4 0.8 .1 R2 4.5g 1.7 With LED Illumination AUTO-ID 1.4 9.5 5.8 BNJ56FBPN10 4.2 Circuit Protectors 10 Fork Terminal Without Terminal Blocks 10 6 BNJ56FB BNJ56FPN10 60 (6-pole) 12 Insulation 12 mm BNJ56F 9.3 9.5 BNJ56BPN10 10 10 o4 Without Explosion Proof Power Supplies 4.6g 6 BNJ56B BNJ56PN10 Emergency Stop Switches Enabling Switches Insulation Ring Terminal BNJ56 BN15LW BNH15LW BN15LWT BNH15LWT BND15LW BNDH15LW 2.8 11 BNJ46FBPN10 3.1g 10 20A 52.5 (6-pole) 5.5 BNJ46FB Control Boxes Controllers Insulation 8.2 R2 .1 10 0.8 o Fork Terminal Switches & Pilot Lights Relays & Sockets 1.4 4.2 4.5 BNJ46F 10 10 52.5 (6-pole) 10.5 11 BNJ46BPN10 8.2 5.5 BNJ46B BNJ46PN10 3.1g Insulation Ring Terminal BNJ46 BN15MW BNH15MW BN15MWT BNH15MWT BND15W BNDH15W BND15WT BNDH15WT 2 BNJ26FWBPN10 4.5 BNJ26FWB 11 4.5 BNJ26FW 10 1.4 2 BNJ26WBPN10 APEM Safety Products 40 (6-pole) 8 6.4 o3.7 11 BNJ26WB BNJ26WPN10 4.5 BNJ26W 10 Insulation 4 BNJ16FB Package Quantity 2.8g Fork Terminal Without Weight (Approx.) 3.7 BNJ16F 35 (6-pole) 7 5.7 o3.7 2 Without 11 BNJ16PN10 4 BNJ16 Current Applicable (Note 1, 2) Terminal Block Dimensions Insulation * Insulation color: Black, Insulation material: PVC Note 1: Ensure that the total current to the jumper does not exceed the maximum current. Note 2: Ensure that the current does not exceed the rated current of the terminal block to be used. Jumper for 2 poles Insulation Ring Terminal BNJ62PN10 Without 25.8 11.6 14.5 8 BNJ62 Current (Note 1, 2) Dimensions BNJ62B BNJ62BPN10 80A 29.4 14.5 mm With Applicable Terminal Block Package Quantity ) Terminal Centers les Ordering No. o7 (ho Part No. 20.6 22.2 BN40W (Note 3) BNH40W (Note 3) BN50W BNH50W 10 * Material: nickel-coated brass * Sheath: PVC Note 1: Ensure that the total current to the jumper does not exceed the maximum current. Note 2: Ensure that the current does not exceed the rated current of the terminal block to be used. Note 3: BN40W and BNH40: Do not install adjacently. Download Downloadcatalogs catalogsand andCAD CADfrom fromhttp://asia.idec.com/downloads http://eu.idec.com/downloads G-028 BN-W / BNH-W Series Terminal Blocks Series Terminal Blocks Accessories (Removal Tool) A tool for removing terminal blocks from the DIN rail. 15 23 20 Part No. BND2 13 8 APEM 6 Switches & Pilot Lights 92 24 Weight (Approx.) 8.6g Package Quantity 1 * Material: Steel * Plating: Zinc Note: Cannot be used for terminal blocks other than BN10W,BNH10W, BN15MW,BNH15MWT,BN15LW,BNH15LW,BN15LWT,BNH15LWT, BN30W,and BNH30W. Control Boxes Emergency Stop Switches Enabling Switches Safety Products Accessories for BND Double-Deck Terminal Blocks Surface Mounting Clip Explosion Proof Terminal Blocks Relays & Sockets Part No. 30 BNDL2 26 Circuit Protectors Power Supplies 13 Ordering No. BNDL2PN10 Applicable Terminal Block BND15W, BNDH15W BND15WT, BNDH15WT BND15LW, BNDH15LW Weight (Approx.) Package Quantity 14.3g 10 * Material: Steel * Plating: Zinc 38 LED Illumination Controllers Operator Interfaces Connecting Rods Sensors Part No. AUTO-ID BN Ordering No. BNR1 BNR1PN10 BNR2 BNR2PN10 Applicable Terminal Block BND15W, BNDH15W BND15WT, BNDH15WT BND15LW, BNDH15LW Weight (Approx.) Dimensions (mm) Package Quantity 21g 265 mm (M4x0.7) 10 43g 500 mm (M4x0.7) 10 * Material: Steel * Plating: Zinc Connecting Nuts M4x0.7 Round Nut M4x0.7 Hex Nut BNN1 o7 G-029 Part No. 6 Ordering No. BNN1PN1H Applicable Terminal Block BND15W, BNDH15W BND15WT, BNDH15WT BND15LW, BNDH15LW * Material: Steel * Plating: Zinc For Formore moreinformation, information,visit visithttp://asia.idec.com http://eu.idec.com Weight (Approx.) Package Quantity 14g 100 (pairs of both nuts) BN-W / BNH-W Series Terminal Blocks Series Terminal Blocks Calculating Rail Lengths and Mounting Centers N: Rounded up numerical number from the calculated value of M. (Example: N for 19.1 is 20) * BNCA, BAA, BAP, and BNJA Rails L1 = 12.5 x N L2 = L1 - 25 Note: M= This formula is for calculating the maximum rail length including tolerance. Depending on the combination of terminal blocks, the required rail length may be shorter than the calculated value, particularly when many terminal blocks are combined. BN150W A: Thickness of each terminal block B: Thickness of end plate C: Thickness of end clip when using 2 pieces of: BNL6 = 56.0 mm BNL7 = 62.5 mm BNL8 = 67.0 mm n: The number of terminal blocks BNE150W BNT20 BNF10S BN100W BN75W BN50W (BNH50W) (A + 0.1) n + B + C 12.5 APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches BNE20 BN40W (BNH40W) BN30W (BNH30W) BN400BW2 (BN400NW2) BN300BW2 (BN300NW2) BN15LWT (BNH15LWT) BN15LW (BNH15LW) Safety Products Explosion Proof BN200BW2 (BN200NW2) BN15MWT (BNH15MWT) BN15MW (BNH15MW) Terminal Blocks BN10W (BNH10W) Relays & Sockets Circuit Protectors Power Supplies LED Illumination 12.5 8.5 13 6.7 Controllers 12 9.6 17 23 23 13 13 12 14 15.5 20 26 26 15 15 6 7 8 10.5 33 3 5 40 78 (2P) 115 (3P) 152 (4P) 52 92 (2P) 136 (3P) 180 (4P) Operator Interfaces 119 (2P) 176 (3P) 233 (4P) Sensors AUTO-ID L2 (Mounting Centers) L1 (Rail Length) Rail Length (Double-Deck) Mounting Centers (Double-Deck) BN Mounting Centers L1 (Rail Length) L2 (Mounting Centers) Spring Washer M4 7 L3 (Terminal Block Length) 35 Terminal Block Connecting Nut BNN1 7.6 Rail BAA/BAP Connecting Rod BNR End Plate BNDE15W 38 4.5 28 5 9 13.6 End Clip BNL6 End Plate BNDE15W Calculating the length (mm) Connecting Rod BNR Terminal Block Surface Mounting Clip BNDL2 Connecting Nut BNN1 Calculating the length (mm) BND15W BNDH15W BND15WT Part No. BND15LW BNDH15LW L1 (1) 12.5 x N L2 (1) L1 - 25 L3 (1, 2) 8xn+9 10.5 x n + 10.3 Connecting Rod Length (1, 2) 8 x n + 8.7 10.5 x n + 10 Mounting Centers (1, 2) BND15W BNDH15W BND15WT 8 x n + 24.2 10.5 x n + 25.5 Connecting Rod Length (1, 2) 8 x n + 20.2 10.5 x n + 21.5 Part No. BND15LW BND15HLW n: The number of terminal blocks N:Rounded up numerical number from the calculated value of M. (Example: N for 19.1 is 20) For BND15W, BNDH15W, BND15WT (8 x n + 9 + 62.5) M= 12.5 For BND15LW, BNDH15LW M= 10.5 x n + 10.3 + 62.5 12.5 1:This formula is for calculating the maximum rail length including tolerance. Depending on the combination of terminal blocks, the required rail length may be shorter than the calculated value, particluarly when many terminal blocks are combined. 2: The length will be 1.5 mm longer when end plates BNDE15W2 and BNDE15LW2 are used. Download catalogs and CAD from http://eu.idec.com/downloads G-030 BN-W / BNH-W Series Terminal Blocks Series Terminal Blocks Instructions How to Use Touch-Down Terminals APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products 1.With the terminal screws in the up position, insert a ring crimping terminal. 2.Push down the head of the screw lightly to hold the crimping terminal. 3.When the wiring is in position, tighten all the screws simultaneously. 4.To remove the wiring, loosen the screw and lightly push up. Explosion Proof Terminal Blocks Installation and Removal on Rails Installation of Double-Deck Terminal Blocks (BND) Rail Mount (photo: when using BND15W, BNDH15W, BNDE15W2) Relays & Sockets Circuit Protectors End Plate BNDE15W Power Supplies Terminal Block Connecting Nut BNN1 LED Illumination Connecting Nut BNN1 End Clip BNL6 Controllers Operator Interfaces Rail BAA/BAP Sensors AUTO-ID Connecting Rod BNR Additional Installation and Removal (on DIN Rail) Installation Removal Pull Out Push BN BND15W/BNDH15W 1. Install end plate. Then mount the terminal blocks onto the DIN rail. 2. Insert connecting rod (BNR) through each hole of the terminal blocks. 3.Secure the ends of the connecting rods with connecting nuts (BNN1). 4.To prevent side-to-side movement on the DIN rail, use the BNL6 end clips at both ends of the rail. Surface Mount End Plate BNDE15W Notes: The following terminal blocks can be added or removed: BN10W, BNH10W, BN15MW, BNH15MW, BN15LW, BNH15LW, BN30W, BNH30W, BN15MWT, BNH15MWT, BN15LWT, BNH15LWT Connecting Nut BNN1 Surface Mounting Clip BNDL2 BND15W/BNDH15W Installing End Plate For double-deck, use an end plate to secure marking strips (BNDE15W2, BNDE15LW2). G-031 Surface Mounting Clip BNDL2 1. Assemble a row of terminal blocks with end plates on exposed ends. 2. Use BNDL2 mounting clips at both ends of a row. 3.With the two holes of the mounting clip (BNDL2) aligned with the terminal block holes, insert a connecting rod (BNR) through each hole. 4.Secure the ends of the connecting rods with the connecting nuts (BNN1). Insert To Secure the Marking Strip Connecting Rod BNR Connecting Nut BNN1 Securing the Ends of the Marking Strip The ends of the marking strip can be secured with a marking strip fastener (or end plate). Terminal Block For Formore moreinformation, information,visit visithttp://asia.idec.com http://eu.idec.com BN-W / BNH-W Series Terminal Blocks Series Terminal Blocks Instructions Dust Covers on the Lower Deck Terminal of Double-Deck Terminal Blocks Installing Dust Covers on Lower Deck Terminals Push in Lower Deck Dust Cover APEM Switches & Pilot Lights Groove Groove 1.Press the lower end of the dust cover into the groove. Control Boxes 2.With the lower end of the dust cover pressed into the groove, push in the top end in the direction of the arrow. Removing Dust Covers from Lower Deck Terminals Emergency Stop Switches Enabling Switches Safety Products Turn the power off before removing the dust cover. 1.Hold the end of the dust cover which is extruding from the end plate. Explosion Proof 2. Lift up in the direction of the arrow. 3.If the dust cover cannot be removed all at once, place fingers between the terminal block and dust cover, and slowly remove the dust cover. Terminal Blocks Relays & Sockets 3 Circuit Protectors Power Supplies 2 LED Illumination 1 Controllers Length of Double-Deck Dust Covers Operator Interfaces Cut required length depending on the number of terminal blocks used. (Length in mm) Upper-Deck Dust Cover BNC230 Terminal Block BND(H)15W BND(H)15WT BND(H)15LW Dust Cover Upper Deck Lower Deck Upper Deck Lower Deck 1-pole 2-pole 3-pole 4-pole 5-pole 6-pole 7-pole 8-pole n-pole 12 20 28 36 44 52 60 68 8 (n+1) - 4 16 24 32 32 48 56 64 72 8 (n+1) 16 26.5 37 47.5 58 68.5 79 89.5 10.5 (n+1) - 5 21 31.5 42 52.5 63 73.5 84 94.5 10.5 (n+1) Sensors AUTO-ID BN Lower-Deck Dust Cover BNC240 Securing Marking Strip with Marking Strip Fasteners for Double-Deck Terminal Blocks Because marking strips can be secured without using marking strip fasteners, installation time can be shortened. Also, marking strips can be inserted and removed after installation. End Plate for Fastening Marking Strips BNDE15W2 BNDE15LW2 End Plate BNDE15W BNDE15LW Marking Strip BNM7 BNM9 BNM725 Terminal Block BND(H)15W BND(H)15WT BND(H)15LW End Plate for Fastening Marking Strips BNDE15W2 BNDE15LW2 Marking Strip BNM7 BNM9 BNM725 Terminal Block BND(H)15W BND(H)15WT BND(H)15LW End Plate BNDE15W BNDE15LW Washer Width Notes on Wiring Terminal Clip Crimping Terminals * When using crimping terminals, be sure to use insulated terminals to prevent electric shocks. Without Crimping Terminals * Insert the wire until the insulation comes into contact with the terminal metal part. * Strip the insulation so that the wire is longer than the width of the wire clamp. * When connecting two wires, use wires of the same size. Download Downloadcatalogs catalogsand andCAD CADfrom fromhttp://asia.idec.com/downloads http://eu.idec.com/downloads Wire G-032