A-05-17- 27 Ve oa Polypropylene film and foil capacitors for pulse applications M Low-loss capacitors with negative capacitance temperature coefficient for a wide field of applica- tions in pulse and resonant circuit operation. M# Extremely low dissipation factor (tan 5) and ESR. @ High insulation resistance. Hl Low dielectric absorption. HI Available with rated voltages up to 1000 VDC with PCM 7.5 and 10 mm. Mf Available taped and reeled. Technical Data Maximum pulse rise time: Dielectric: Polypropylene film. Pulse rise time V/ psec Capacitor electrodes: Metal foil. one max. operation Encapsulation: Flame-retardent plastic case, UL 94 V-O, HB 100 VDC | 160 VDC | 250 VDC | 400 VDC | 630 VDC | 1000 VDC with epoxy resin seal. Colour: Green. Marking: Black. 100... 1000 9500 | 2500 | 2500 Temperature range: - 55 C to + 100 C. Test specifications: In accordance with IEC 384-13 1500 ... 6800 | 1000 | 1000 | 1200 | 2000 | 2500 | 2500 0.01 ...0.022 | 1000 | 1000 | 1000 ; 1000 | 1500 | - and CECC 31800. Test category: 55/100/56 in accordance with IEC. 0.033 ... 0.1 1000 | 1000 | 1000) - - - Insulation resistance at + 20 C: for pulses equal to the rated voltage. > 5x0 megohms (mean value: 1X 10 megohms) Test voltage: 2 Vr, 2 sec. In accordance with IEC 384-13 and CECC 31 800. Vibration: 6 hours at 10... 2000 Hz and 0.75 mm displacement Measuring voltage: 100 V/1 min. amplitude or 10 g in accordance with IEC 68-2-6. Dissipation factors at + 20 C: Low air density: 1 kPa=10 mbarin accordance with IEC 68-2-13. tand < 4X10* at 1 kHz Bump test: 4000 bumps at 390 m/sec? in accordance tan < 5X10 at 10kHz with IEC 68-2-29. tan 3 < 10104 at 100 kHz Dielectric absorption: 0.05%. Capacitance tolerances: + 20%, + 10%, + 5%. Voltage derating: A voltage derating factor of 1.35% per K Temperature coefficient: -250 X 10/ C (general guide). must be applied from + 85 C for DC voltages and from +75 C for AC voltages. General Data Graphs see page 6. 62 D USF MM 4827950 0008712 6593 a