AUNA-202
1.0 W 14-16 Volts, DC- 200MHz
Introduction
The AUNA-202 is a 50 Ohm hybrid amplifier module
designed for broadband operation in Class A
amplifier driver applications operating from DC to
200MHz. Its wide dynamic range and flexibility make
it ideal for a broad spectrum of instrurmentation,
receiver, and transmitter applications.
* Stresses in excess of the absolute maximum ratings can cause
permanent damage to the device. These are absolute stress rat-
ings only. Functional operation of the device is not implied at
these or any other conditions in excess of those given in the
operational sections of the data sheet. Exposure to absolute
maximum ratings for extended periods can adversely affect
device reliability.
Caution: Device contains Beryllium Oxide
1
Features
- Gold Metalized
- Internally matched to 50 Ohms
- Caccadeable
- Wide dynamic range
ELECTRICAL CHARACTERISTICS at Tcase = 25 Deg C.
Symbol Characteristics Min. Typ. Max. Units Test Conditions
Ga Small signal Gain 12.0 13.0 dBm
Delta Ga Gain Flatness +/- 0.5 +/- 1 dB
P1dB Pout @ 1dB Comp. +30 +32 dBm
VSWR Input Mismatch 1.5:1 2.0:1
Vdc Operating voltage 14.0 15.0 16.0 Volts
Delta Tjf Temp. Rise Junction +50 C
to Flange
NF Noise Figure 5.0 dBm
IP3 3rd Order Intercept +50 dBm
T Oper. Operating Temp. -55 +125 Deg C
T Stor. Storage Temp -55 +150 Deg C
Freq = 1 -200MHz
Idc = 350mA
Freq = 70MHz
Idc = 350mA
Freq = 30 MHz
Idc = 350mA
AUNA-202
1.0 W 14-16 Volts, DC- 200MHz
2
