Commercial CCR-33 Miniature DC-18GHz SPDT Switch Failsafe The CCR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA connectors. The CCR-33 series switch is offered with either a failsafe or latching actuator. This design is compatible with the two most common mounting hole patterns. The CCR-33 series switch is interchangeable with a variety of switches. Specifications RF Contacts: Break before make Actuator Voltage (VDC) 20O C 12 Current (mA) 200 160 90 Switching Time: 20 msec max Connectors: SMA (f) Weight: 1.65 oz. max 15 If your requirements are more demanding then perhaps the CCM-33 Range of 10 Million cycle switches would be of interest. 28 Temperature Range: -25O C to +65O C (Operating) Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating) Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating) Humidity: Moisture Seal Available MTBF: 7.3 Million Hours ( MIL-HDBK-217F Fixed, 25O C, <1 Cycle per hour) RF Power Handling 3000 Return Loss Typical Performance 800 Power CW (Watts) 400 Sta nda rd S MA 200 Co nne cto rs 15 80 25 40 0.01 1.0 4.0 Frequency GHz 10 Frequency GHz 0.0 0.4 VSWR (max) Insertion Loss (min) Isolation (max) DC-6 GHz 6-12 GHz 12-18 GHz 1.25:1 0.20 dB 70.0 dB 1.40:1 0.40 dB 60.0 dB 1.50:1 0.50 dB 60.0 dB 60 IL dB Specifications 18.0 18 Isolation dB 10 0.1 70 80 90 0.01 Specifications subject to change without notice. Frequency GHz 18.0 www.rfswitches.com email: switches@teledyne.com Tel: 800 -284-7007 8 01/2004 Commercial CCR-33 Miniature DC-18GHz SPDT Switch Failsafe Indicators Analog TTL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL Optional Narrow Width Body Standard Width Body Part Numbering System for CCR-33 (Failsafe) CCR-33 S 1 O - N Series Options Connectors Actuator Type Actuator Voltage Connector S: SMA Female # Actuator Voltage 1: 28Vdc Failsafe # 2: 15Vdc Failsafe # 3: 12Vdc Failsafe # Actuator Type O: No Indicator Contacts # C: Indicator Contacts # Options T: TTL Drivers with Diodes N: Narrow Body # R: Positive + Common #: Stock item subject to prior sale For other options contact Factory Specifications subject to change without notice. www.rfswitches.com email: switches@teledyne.com Tel: 800- 284-7007 01/2004 9