14 TURNS CERMET TRIMMERS RoHS compliant RJ-5 1 INTERNAL STRUCTURE !0 2 3 4 5 6 9 7 8 Part name Material Flammability Polybutyleneterephthalate UL-94V-0 FEATURES 1 Housing RoHS compliant Fine setting is possible Sealed construction (Washable: Refer to A-328) 2 Base element 3 Electrode Ag-Pd cermet 4 Resistive element RuO2 cermet 5 Adhesive 6 Wiper 7 Terminal pin 8 Rubber cushion 9 Rotor gear !0 Shaft Ceramic -- Epoxy Multi metal alloy Copper, Tin-plated Silicone rubber Polyamide UL-94HB Brass, Nickel-plated -- PART NUMBER DESIGNATION R J - 5 E W 1 0 0 k ( 1 0 4 ) Series name Resistance code Terminal pin Resistance value ESn (Lead-free) Product shape W Top adjustment X Side adjustment P Side adjustment Please refer to the LIST OF PART NUMBERS when placing orders. Specifications are subject to change without notice. COPAL ELECTRONICS RJ-5 CERMET TRIMMERS LIST OF PART NUMBERS <Nominal resistance values> Form of packaging Adjustment position Pieces in package Shape of terminal (Top view) Plastic bag 1 RJ-5EW Side adjustment (Adjustment direction) 50 100 200 500 1 k 2 k 20 k 50 k 100 k 200 k 500 k 1 M 2 M 5 k Fig. 1 The products indicated by A mark are manufactured upon receipt of order basis. 2 1 3 A20 10 k The above part numbers are all available with the respective combination of <Nominal resistance values> (Fig. 1). Verify the above part numbers when placing orders. Top adjustment 3 A10 RJ-5EX 50 pcs./pack 2 1 3 RJ-5EP 2 MECHANICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Nominal resistance range Resistance tolerance Mechanical turn 14 turns 10 ~ 2 M Operating torque 20 mN*m {204 gf*cm} maximum 10 % Mechanical stop Clutch action Power ratings 0.25 W (85 C) 0 W (120 C) Resistance law Linear law Maximum input voltage DC200 V or power rating, whichever is smaller Maximum wiper current 100 mA or power rating, whichever is smaller Effective electrical turn 11 turns Rotational life Terminal strength Thrust to shaft 200 cycles 10 ~ 200 [R/R (0.5 +3 %)] 500 ~ 2 M [R/R (0.5 +2 %)] 10 N {1.02 kgf} minimum Tensile strength 5 N {0.51 kgf} minimum 245 3 C, 2 ~ 3 s Solderability { }Reference only End resistance 1 % or 2 , whichever is greater C.R.V. 1 % or 3 , whichever is greater ENVIRONMENTAL CHARACTERISTICS Test item Operating temp. range Temp. coefficient Insulation resistance - 55 ~ 120 C 10 ~ 50 : 250 10-6/C maximum 100 ~ 2 M : 100 10-6/C maximum 1000 M minimum (DC500 V) Dielectric strength AC600 V, 60 s Net weight Approx. 0.37 g Thermal shock Humidity Shock Test conditions Specifications -65 ~ 125 C (0.5 h), 5 cycles [R/R 1 %] [S.S. 1 %] -10 ~ 65 C (80 ~ 98 %), 10 cycles, 240 h 981 m/s2, 6 ms 6 directions for 3 times each Vibration Amplitude 1.52 mm or Acceleration 196 m/s2, 10 ~ 2000 Hz, 3 directions, 12 times each Load life 85 C, 0.25 W, 1000 h [R/R 1 %] [R/R 1 %] [S.S. 1 %] [R/R 2 %] [S.S. 1 %] Low temp. operation -55 C, 2 h High temp. exposure 120 C, 250 h Immersion seal 85 C, 60 s No leaks (No continuous bubbles) Soldering heat Flow soldering 260 3 C, 5 ~ 6 s, two times maximum Manual soldering 380 10 C, 3 ~ 4 s [R/R 1 %] [R/R 2 %] [S.S. 2 %] R/RChange in total resistance S.S. Setting stability Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS RJ-5 CERMET TRIMMERS MAXIMUM INPUT RATINGS Nominal resistance values () A A Resistance code Maximum input voltage (V) Maximum wiper current (mA) 10 20 50 100 200 500 100 200 500 101 201 501 1.00 2.00 3.53 5.00 7.07 11.1 100 100 70.7 50.0 35.3 22.3 1k 2k 5k 10 k 20 k 50 k 102 202 502 103 203 503 15.8 22.3 35.3 50.0 70.7 111 15.8 11.1 7.07 5.00 3.53 2.23 100 k 200 k 500 k 1M 2M 104 204 504 105 205 158 200 200 200 200 1.58 1.00 0.40 0.20 0.10 OUTLINE DIMENSIONS The products indicated by A mark are manufactured upon receipt of order basis. Unless otherwise specified, tolerance: 0.3 (Unit: mm) RJ-5EW Top adjustment 1 1.6, Slot 0.6 W x 0.8 D 3 3 2.5 2 2.5 3 - 0.40.05 CW rotation 2 0.9 6 Resistance code & Production date code Lead-free Identification mark 1 4.3 1 1 72 6.75 2.5 1.2 2.5 1.2 RJ-5EX Side adjustment 1.6, Slot 0.6 W x 0.8 D 3 - 0.40.05 Resistance code & Production date code 0.9 2.5 2 6 3 2.5 1 1 Lead-free Identification mark 4.3 72 6.75 1 RJ-5EP Side adjustment 1.6, Slot 0.6 W x 0.8 D 3 - 0.40.05 3 2.5 2.5 0.9 6.4 2 2.5 1 6.75 Lead-free Identification mark 4.5 72 1 3.2 Resistance code & Production date code 1 3.2 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS RJ-5 CERMET TRIMMERS PACKAGING SPECIFICATIONS <Bulk pack specifications> Unit of bulk in a plastic bag is 50 pcs. per pack. Boxing of bulk in a plastic bag is performed with 200 pcs. per box. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.