Click on Series name for product info on aimtec.com Series AM1DR-Z 1 Watt | DC-DC Converter FEATURES: * * * * * * * * RoHS compliant Regulated output voltage Low ripple and noise High efficiency up to 70% Operating temperature -40oC to + 85oC Input / Output Isolation 1000 & 3000VDC Pin compatible with multiple manufacturers 7 pin SIP package Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) AM1DR-0503SZ AM1DR-0505SZ AM1DR-0507SZ AM1DR-0509SZ AM1DR-0512SZ AM1DR-0515SZ AM1DR-1203SZ AM1DR-1205SZ AM1DR-1207SZ AM1DR-1209SZ AM1DR-1212SZ AM1DR-1215SZ AM1DR-2403SZ AM1DR-2405SZ AM1DR-2407SZ AM1DR-2409SZ AM1DR-2412SZ AM1DR-2415SZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 300 200 138 111 84 67 300 200 138 111 84 67 300 200 138 111 84 67 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 333 294 299 282 286 282 153 128 124 124 117 121 72 61 62 58 60 59 AM1DR-0503SH30Z AM1DR-0505SH30Z AM1DR-0507SH30Z AM1DR-0509SH30Z AM1DR-0512SH30Z AM1DR-0515SH30Z AM1DR-1203SH30Z AM1DR-1205SH30Z AM1DR-1207SH30Z AM1DR-1209SH30Z AM1DR-1212SH30Z AM1DR-1215SH30Z AM1DR-2403SH30Z AM1DR-2405SH30Z AM1DR-2407SH30Z AM1DR-2409SH30Z AM1DR-2412SH30Z AM1DR-2415SH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 300 200 138 111 84 67 300 200 138 111 84 67 300 200 138 111 84 67 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 333 294 299 282 286 282 153 128 124 124 117 121 72 61 62 58 60 59 Model Input Current Full Load | No Load mA Max Capacitive Load (uF) Efficiency (Full load) (%) 23 23 25 30 30 35 10 16 17 18 18 21 7 6 7 7 9 9 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 60 68 67 71 70 71 60 65 67 67 71 69 64 68 67 72 70 71 23 23 25 30 30 35 10 16 17 18 18 21 7 6 7 7 9 9 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 60 68 67 71 70 71 60 65 67 67 71 69 64 68 67 72 70 71 Input Specifications Parameters Voltage range Filter Turn on Transient process time Start up time www.aimtec.com F 051e R6.H Nominal 5 12 24 Typical Maximum 4.5-5.5 10.8-13.2 21.6-26.4 Units VDC Capacitor 100 200 Tel: +1 514 620 2722 1 of 4 ms ms Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DR-Z 1 Watt | DC-DC Converter Input Specifications (continued) Parameters Absolute Maximum Rating Nominal Typical 5 Vin 12 Vin 24 Vin 0-7 0-15 0-28 100 Peak Input Voltage time Maximum Units VDC ms Isolation Specifications Parameters Conditions Tested I/O voltage Resistance Capacitance Typical 60 sec Rated Units 1000 & 3000 VDC MOhm pF > 1000 60 Output Specifications Parameters Voltage accuracy Line voltage regulation (Single) Load voltage regulation (Single) Temperature coefficient Ripple & Noise Capacitive load Rising time Conditions Typical 0% to 100% load 2 0.5 0.5 0.02 50 At 20MHz Bandwidth Maximum Units % % % %/oC mV p-p F ms 220 50 General Specifications Parameters Switching frequency Max Case temperature Operating temperature Storage temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load 50 Maximum +95 Full Load without Derating -40 to +85 -55 to +125 Not Required Free air convection Units KHz oC oC oC 95 % Non conductive black plastic 2.8 g 0.76 x 0.28 x 0.39 inch 19.50 x 7.20 x 10.00 mm >3 500 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Safety Specifications Parameters Agency Approvals Safety Standards www.aimtec.com F 051e R6.H CE EN 55032, Class B(With recommended EMC circuit) IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6 IEC61000-4-8 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DR-Z 1 Watt | DC-DC Converter Typical Efficiency Example Charts Eff % AM1DR-0505SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % Eff % AM1DR-1215SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % Eff % AM1DR-2405SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % www.aimtec.com F 051e R6.H Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DR-Z 1 Watt | DC-DC Converter Pin Out Specifications Pin 1000VDC 3000VDC 1 2 4 5 6 7 + V Input - V Input - V Output No pin + V Output No pin + V Input - V Input No pin - V Output No pin + V Output Dimensions 19.50 (0.76) 7.20 (0.28) PRINTED FACE 10.0 (0.39) 9.50 (0.37) 0.50 (0.02) 4.10 (0.16) 2.54 (0.10) 15.20 (0.60) 0.50 (0.02) 7.20 (0.28) 0.50 (0.02) 0.25 (0.01) 1.25 (0.05) Radiated and Conducted Emissions Application circuit: C1 L1 470F/100V 12 H NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.H Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only