A212
0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
FX10 Series
1. Improved Transmission Efficiency Between
Boards
Transmission characteristics have been improved through
a design that fixes ground plates to both sides of the
header and receptacle.
2. 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the
ground plate SMT connected to the board. The ground
stability achieved serves to reduce noise.
3. Metal Fittings for Added Solder Weld Strength
Metal fittings provide greater adhesion to the board,
protecting against peeling. The unique connector design
provides a connection between the fitting and the ground
plate for a stronger ground.
4. Suited to High-Density Applications
The signal contact pitch of 0.5 mm produces a smaller
connector utilizing less board area for mounting.
5. High contact reliability
Effective mating length is 1.1 mm for signal contacts.
6. Optional Ground Plate
An alternate style without the ground plate is available. The
space provided by the ground plate removal has been filled
with additional signal contacts.
7. Board-To-Board Dimensions of 4mm and 5
mm Are Available
Features
Applications
Notebook computers, PDA, and other miniature electronic equipment.
Metal fitting
Housing
Ground plate and metal
fitting make contact
Ground
plate
Signal contact
0.5mm
0.75mm 0.75mm
Cross-Section of Mating
BStack Height
Headers
Receptacles
FX10#–*P/*–SV
FX10#–*P/*–SV1
FX10#–*S/*–SV 4mm 5mm
With ground plate
Without ground plate
Headers
Receptacles FX10–*P–SV FX10–*P–SV1
FX10*SSV 4mm 5mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A213
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10
cycles each
Acceleration of 490 m/s
2
, 11 ms duration, sine half-wave
waveform, for 3 cycles in the both directions of each of the 3 axes
Temperature: -55ç15 to 35ç85ç15 to 35ç
Time: 30 min. 2 to 3 min. 30 min. 2 to 3 min. for 5 cycles
Reflow: At the recommended temperature profile
Soldering iron temperature: 360çfor 5 seconds
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
50 times
100 Møor greater
No flashover or breakdown
60 møor less
No electrical discontinuity for 1µs or greater
No damage, cracks, or parts looseness
No electrical discontinuity for 1µs or longer
No damage, cracks, or parts looseness
Contact resistance of 70 møor less
No damage, cracks, or parts looseness
No melting of resin portion which affects performance
Product Specifications
Item Requirements Conditions
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are suited to the non-conducting condition following board assembly.
Note 2: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
Rating Rated current
Rated voltage 0.3 A (Note 1)
50 V AC Operating temperature range
Operating humidity range
-55 to 85ç
Relative humidity 95% or less
(No condensation)
Storage temperature range
Storage humidity range -10 to +60ç(Note 1)
-40 to 70% (Note 1)
1.
Insulation resistance
2. Voltage resistance
3. Contact resistance
4. Vibration
5. Shock
6. Damp heat
(Steady state)
8. Durability
9. Resistance to
soldering heat
7. Temperature cycle
Contact resistance of 70 møor less, insulation resistance of
100 Møor greater, no damage, cracks, or parts looseness
Contact resistance of 70 møor less, insulation resistance of
100 Møor greater, no damage, cracks, or parts looseness
Product Number Configuration
FX10 # -P / -SV 1 (✽ ✽)
1 2 7
3
4 5 6
Materials
Part Material Process Notes
Insulator
Contacts
Ground plate
Metal fitting
LCP
Phosphor bronze
Phosphor bronze
Phosphor bronze
Beige
Header
Engagement Area: Gold plating of 0.1µm
Tenmination Area: Tin plating
Receptacle
Engagement Area: Gold plating of 0.1m
Termination Area
: Flash plating
Tin plating
Tin plating
UL94V-0
---
---
---
Series name: FX10
Form Symbol
A: With guide post
B: Without guide post
Number of contacts
Signal/Ground: 80/8, 100/10, 120/12,
140/14
Signal: 96, 120, 144, 168
Connector type
P: Header
S: Receptacle
Contact form
SV: Straight SMT
Product height
Blank: Standard
1 : Standard + 1mm
Packaging classification
Blank(71): Tray packaging
(21), (91): Embossed tape packaging
3
5
6
4
7
1
2
With ground plate
Without ground plate
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A214
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
3
4
Headers with ground plate
4mm Stacking Height
Unit: mm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Part No. CL No.
FX10A- 80P/ 8-SV(71)
FX10A-100P/10-SV(71)
FX10A-120P/12-SV(71)
FX10A-140P/14-SV(71)
FX10B- 80P/ 8-SV(71)
FX10B-100P/10-SV(71)
FX10B-120P/12-SV(71)
FX10B-140P/14-SV(71)
CL570-0001-5-71
CL570-0002-8-71
CL570-0003-0-71
CL570-0004-3-71
CL570-0021-2-71
CL570-0022-5-71
CL570-0023-8-71
CL570-0024-0-71
Number of Contacts
Signal
80
100
120
140
80
100
120
140
Ground
8
10
12
14
8
10
12
14
A
23.5
29.5
35.5
41.5
23.5
29.5
35.5
41.5
B C D E F Remarks RoHS
18
24
30
36
18
24
30
36
31.1
37.1
43.1
49.1
31.1
37.1
43.1
49.1
26.4
32.4
38.4
44.4
31.5
37.5
43.5
49.5
31.5
37.5
43.5
49.5
28.3
34.3
40.3
46.3
28.3
34.3
40.3
46.3
Without guideposts
With guideposts
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A215
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
3
4
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Headers with ground plate
5mm Stacking Height
A
(5.7)
0.2±0.050.5±0.05
(0.75) (0.75)
A±0.2
B±0.2
D±0.1 Guidepost
C±0.3
4.5±0.3
(0.6)
2-(Ø1)
(0.5)
(6)
2.5±0.2
5.9±0.3
Unit: mm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] -✽ ✽,(✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Part No. CL No.
FX10A- 80P/ 8-SV1(71)
FX10A-100P/10-SV1(71)
FX10A-120P/12-SV1(71)
FX10A-140P/14-SV1(71)
FX10B- 80P/ 8-SV1(71)
FX10B-100P/10-SV1(71)
FX10B-120P/12-SV1(71)
FX10B-140P/14-SV1(71)
CL570-0101-0-71
CL570-0102-2-71
CL570-0103-5-71
CL570-0104-8-71
CL570-0121-7-71
CL570-0122-0-71
CL570-0123-2-71
CL570-0124-5-71
Number of Contacts
Signal
80
100
120
140
80
100
120
140
Ground
8
10
12
14
8
10
12
14
A
23.5
29.5
35.5
41.5
23.5
29.5
35.5
41.5
B C D E F Remarks RoHS
18
24
30
36
18
24
30
36
31.1
37.1
43.1
49.1
31.1
37.1
43.1
49.1
26.4
32.4
38.4
44.4
31.5
37.5
43.5
49.5
31.5
37.5
43.5
49.5
28.3
34.3
40.3
46.3
28.3
34.3
40.3
46.3
Without guideposts
With guideposts
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A216
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
Not required in products without guideposts.
1
2
3
Receptacles with ground plate
A
(0.75) (0.75)
0.5±0.05 0.2±0.05
(7.1)
A±0.2
B±0.2
C±0.3
D±0.1
3.2±0.3 2.5±0.2
7.3±0.3
(6)
(0.5)
(0.6)
2-(Ø1) Guidepost
Unit: mm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number]-✽ ✽,(✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Part No. CL No.
FX10A- 80S/ 8-SV(71)
FX10A-100S/10-SV(71)
FX10A-120S/12-SV(71)
FX10A-140S/14-SV(71)
FX10B- 80S/ 8-SV(71)
FX10B-100S/10-SV(71)
FX10B-120S/12-SV(71)
FX10B-140S/14-SV(71)
CL570-0201-4-71
CL570-0202-7-71
CL570-0203-0-71
CL570-0204-2-71
CL570-0221-1-71
CL570-0222-4-71
CL570-0223-7-71
CL570-0224-0-71
Number of Contacts
Signal
80
100
120
140
80
100
120
140
Ground
8
10
12
14
8
10
12
14
A
23.5
29.5
35.5
41.5
23.5
29.5
35.5
41.5
B C D E F Remarks RoHS
18
24
30
36
18
24
30
36
31.1
37.1
43.1
49.1
31.1
37.1
43.1
49.1
26.4
32.4
38.4
44.4
31.5
37.5
43.5
49.5
31.5
37.5
43.5
49.5
28.3
34.3
40.3
46.3
28.3
34.3
40.3
46.3
Without guideposts
With guideposts
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A217
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
Headers without ground plate
4mm Stacking Height
A±0.2
(0.5) 0.2 ±0.05
5.9 ±0.3
(5.7)
2.5 ±0.2
B±0.3
(0.6)
C±0.1
2-(Ø1)
Guidepost
3.5±0.3
Unit: mm
Part No. CL No.
FX10A- 96P-SV(71)
FX10A-120P-SV(71)
FX10A-144P-SV(71)
FX10A-168P-SV(71)
FX10B- 96P-SV(71)
FX10B-120P-SV(71)
FX10B-144P-SV(71)
FX10B-168P-SV(71)
CL570-0041-0-71
CL570-0042-2-71
CL570-0043-5-71
CL570-0044-8-71
CL570-0051-3-71
CL570-0052-6-71
CL570-0053-9-71
CL570-0054-1-71
Number of Contacts
Signal
96
120
144
168
96
120
144
168
A
23.5
29.5
35.5
41.5
23.5
29.5
35.5
41.5
B C D E
31.1
37.1
43.1
49.1
31.1
37.1
43.1
49.1
26.4
32.4
38.4
44.4
31.5
37.5
43.5
49.5
31.5
37.5
43.5
49.5
28.3
34.3
40.3
46.3
28.3
34.3
40.3
46.3
Remarks RoHS
Without guideposts
With guideposts
YES
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number]-✽ ✽,(✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
0.5±0.03
A±0.05
C±0.05
E 0
-0.1
D+0.1
0
Ø1.1±0.05
3.1+0.1
0
1.45±0.05 0.3±0.03(Land)
2 0
-0.1
4.1 0
-0.1
6.3+0.1
0
Ø1.2±0.05
0.25±0.03(Metal mask)
2
2
1
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A218
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
0.25±0.03(Metal mask)
0.5 ±0.03
A ±0.05
C±0.05
E0
-0.1
D+0.1
0
Ø1.1 ±0.05
3.1+0.1
0
1.45 ±0.05 0.3 ±0.03(Land)
2 0
-0.1
4.1 0
-0.1
6.3
Ø1.2 ±0.05
2
2
1
+0.1
0
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
Headers without ground plate
5mm Stacking Height
A ±0.2
(0.5 )0.2 ±0.05
5.9 ±0.3
(5.7 )
2.5 ±0.2
B±0.3
(0.6 )
4.5±0.3
C±0.1
2-(Ø 1)
Guidepost
Unit: mm
Part No. CL No.
FX10A- 96P-SV(71)
FX10A-120P-SV(71)
FX10A-144P-SV(71)
FX10A-168P-SV(71)
FX10B- 96P-SV(71)
FX10B-120P-SV(71)
FX10B-144P-SV(71)
FX10B-168P-SV(71)
CL570-0141-4-71
CL570-0142-7-71
CL570-0143-0-71
CL570-0144-2-71
CL570-0151-8-71
CL570-0152-0-71
CL570-0153-3-71
CL570-0154-6-71
Number of Contacts
Signal
96
120
144
168
96
120
144
168
A
23.5
29.5
35.5
41.5
23.5
29.5
35.5
41.5
B C D E
31.1
37.1
43.1
49.1
31.1
37.1
43.1
49.1
26.4
32.4
38.4
44.4
31.5
37.5
43.5
49.5
31.5
37.5
43.5
49.5
28.3
34.3
40.3
46.3
28.3
34.3
40.3
46.3
Remarks RoHS
Without guideposts
With guideposts
YES
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number]-✽ ✽,(✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A219
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
A±0.05
0.5±0.03
C±0.05
E0
-0.1
D+0.1
0
3.1+0.1
0
Ø1.1±0.05
Ø1.2±0.05
4.5 0
-0.1
7.7 +0.1
0
1.45±0.05 0.3±0.03(Land)
0.25±0.03(Metal mask)
1
Receptacles without ground plate
A±0.2
( 0.5 ) 0.2 ±0.05
7.3 ±0.3
( 7.1 )
2.5 ±0.2
3.2±0.3
B±0.3
( 0.6 )
2-(Ø1)
C±0.1 Guidepost
Unit: mm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number]-✽ ✽,(✽ ✽)
Blank: Tray packaging
(21) : Embossed tape packaging
Part No. CL No.
FX10A- 96S-SV1(**)
FX10A-120S-SV1(**)
FX10A-144S-SV1(**)
FX10A-168S-SV1(**)
FX10B- 96S-SV1(**)
FX10B-120S-SV1(**)
FX10B-144S-SV1(**)
FX10B-168S-SV1(**)
CL570-0241-9-**
CL570-0242-1-**
CL570-0243-4-**
CL570-0244-7-**
CL570-0251-2-**
CL570-0252-5-**
CL570-0253-8-**
CL570-0254-0-**
Number of Contacts
Signal
96
120
144
168
96
120
144
168
A
23.5
29.5
35.5
41.5
23.5
29.5
35.5
41.5
B C D E
31.1
37.1
43.1
49.1
31.1
37.1
43.1
49.1
26.4
32.4
38.4
44.4
31.5
37.5
43.5
49.5
31.5
37.5
43.5
49.5
28.3
34.3
40.3
46.3
28.3
34.3
40.3
46.3
Remarks RoHS
Without guideposts
With guideposts
YES
Note Not required in products without guideposts.1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A220
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
BEmbossed Carrier Tape Dimensions
Headers
0.9
4±0.1
(7.6)
(8)
A±0.1
B±0.1
C±0.3
(0.4)
(3.5)
R0.75 +0.05
0
0.2±0.05
Unreeling direction
2±0.1
12±0.1
Ø1.5
+0.1
0
1.75±0.1
Receptacles
(6.2)
(D) 0.9
4±0.1
(6.6)
A±0.1
B±0.1
C±0.3
(0.4)
0.2±0.05
1.75±0.1
Ø1.5
+0.1
0
2±0.1
12±0.1
Unreeling direction
R0.75 +0.05
0
Reel Dimensions
(G)
(Ø80)
(E)
(F)
Ø13±0.5
Insertion Connector BA
Unit: mm
FX10#- 80P/ 8-SV1
FX10#-100P/10-SV1
FX10#-120P/12-SV1
FX10#-140P/14-SV1
FX10#-196P/ -SV1
FX10#-120P/ -SV1
FX10#-144P/ -SV1
FX10#-168P/ -SV1
FX10#- 80P/ 8-SV1
FX10#-100P/10-SV1
FX10#-120P/12-SV1
FX10#-140P/14-SV1
FX10#-196P/ -SV1
FX10#-120P/ -SV1
FX10#-144P/ -SV1
FX10#-168P/ -SV1
20.2
26.2
34.2
20.2
26.2
34.2
20.2
26.2
34.2
20.2
26.2
34.2
40.4
52.4
68.4
40.4
52.4
68.4
40.4
52.4
68.4
40.4
52.4
68.4
44
56
72
44
56
72
44
56
72
44
56
72
3.8
4.8
45.5
59
76.5
45.5
59
76.5
45.5
59
76.5
45.5
59
76.5
50.5
64
81.5
50.5
64
81.5
50.5
64
81.5
50.5
64
81.5
C D E F G
370
330
Note: There is no polarity in terms of embossed tape
packaging for this product.
BA C E F G
Insertion Connector
Unit: mm
FX10#- 80P/ 8-SV1
FX10#-100P/10-SV1
FX10#-120P/12-SV1
FX10#-140P/14-SV1
FX10#-196P/ -SV1
FX10#-120P/ -SV1
FX10#-144P/ -SV1
FX10#-168P/ -SV1
20.2
26.2
34.2
20.2
26.2
34.2
40.4
52.4
68.4
40.4
52.4
68.4
44
56
72
44
56
72
45.5
59
76.5
45.5
59
76.5
50.5
64
81.5
50.5
64
81.5
330
Note: There is no polarity in terms of embossed tape
packaging for this product.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A221
FX10 Series0.5mm Pitch Connectors with Ground Plate for Board-to-Board Connections
BConnector Handling Precautions
1. Allowable Creepage Dimensions at Time of Mating
The effective mating length of this product is 1.1 mm for the signal portion and 1 mm for the ground portion. The creepage of the
header and receptacle at the time of mating should be within 0.5 mm of the completely mating condition.
2. Retension of Boards
Avoid the support of boards by connectors alone and adopt a locking measure that does not rely on the connectors.
3. Solder Repair
Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair.
This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into
consideration prior to connector washing.
4. Miscellaneous
·
Note that excessive twisting while inserting or withdrawing connectors will cause damage.
·
The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance.
Water Type Washing
When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the
documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
Washing Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the
deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed.
BWashing Conditions
Organic Solvent Washing
Solvent
Room temperature washing
Heated washing
IPA
(Isopropyl alcohol) Yes Yes
HCFC
(Hydrochlorofluorocarbon) Yes Yes
BRecommended Temperature Profile
HRS test Conditions
Test board Glass epoxy 161mm∞100mm∞1.6mm thick
Solder method :Reflow
Solder composition :Paste,
96.5%Sn/3%Ag/0.5%Cu
Metal mask :0.15mm thick
Reflow cycles :2 cycles
The temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type,
volume/thickness and board size/thickness. Consult your
solder paste and equipment manufacturer for specific
recommendations.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.