Manual Supplement Manual Title: 28 II Ex Users Print Date: November 2011 Revision/Date: Supplement Issue: Issue Date: Page Count: 1 2/12 7 This supplement contains information necessary to ensure the accuracy of the above manual. This manual is distributed as an electronic manual on the following CD-ROM: CD Title: CD Rev. & Date: CD PN: (c) 2012 Fluke Corporation. All rights reserved. Printed in the U.S.A. 28 II Ex 11/2011 3945765 x 28 II EX Users Manual Supplement Change #1, 60849 & 60854 On page 1, replace the second paragraph with: The Product is designed for operation in potentially explosive areas of Zone 1, 2, 21, 22, and M1 as specified in Directive 1999/92/EC and 94/9/EC (ATEX). There can be dangerous consequences if you do not follow these instructions. On page 2, replace the last bullet with: Industrial use in potentially explosive areas of zone 1, 2, 21, 22, or M1, in accordance with ATEX requirements (see the EX safety instructions & regulations section) On page 7, replace the entire page with: 2/12 1 28 II EX Users Manual Supplement P0 = 3.4 mW Ex-Certification Data * Ex-Type certificate no: PTB 11 ATEX 2028 X IECEx PTB 11.0080X * Ex-Designation: ATEX: II 2G Ex ia IIC T4 Gb II 2D Ex ia IIIC T130 C Db I M1 Ex ia I Ma Lo/Co IECEx: Ex ia IIC T4 Gb Ex ia IIIC T130 C Db Ex ia I Ma * CE: CE0102 * Operating Temperature: -15 C to 50 C * Storage Temperature: -40 C to +60 C * Batteries: 3 AAA Alkaline batteries, NEDA 24A IEC LR03. Table 7 shows the approved batteries for this Product. 9.54 V negligible negligible Ii negligible 1000 100 2 0.5 0.1 0.01 Co/F 0 0.61 1 1.4 2.1 3.6 U0 C0 I0 L0 P0 = = = = = 0V Ui = 65 V 1000 F Ci = negligible 0mA 1000 mH Li = negligible 0 mW mA/A Jack U0 Ci I0 Li P0 Voltage - measurement input Ui = 65 V: = = = = Lo/mH Current - measurement input Ii = 5 A: For connections to intrinsically-safe circuits, observe these Product connections: U0 Ci I0 Li Ri = 2.47K = = = = = 1.95 V Ui = 65 V negligible 9.7 A Ii = Internally limited by a 440 mA fuse negligible negligible = negligible 2 2/12 28 II EX Users Manual Supplement Lo/Co Lo/mH 1000 100 5 1 0.5 0.005 Co/F 0 14 19 25 30 1000 For measurements on protected electric circuits: * Approved for Zones 2 and 1, device group II, explosion group IIC (explosive gases, vapors and mist), temperature class T4. * Approved for Zones 21 and 22, device group II, explosion group IIIC, conducting and nonconducting dust, fibers, and flyings. * Approved for use in mines. Device group I, explosion group I, methane, and coal dust. 3 2/12 28 II EX Users Manual Supplement On page 43, replace Table 10 with: Table 10. Replacement Parts Qty. Fluke Part or Model Number Fuse, 11 A, 1000 V, FAST 1 803293 28 II Ex Fuse Assembly 1 4016494 Alligator Clip, Black 1 Alligator Clip, Red 1 Test Lead Set 1 TL175 28 II Ex Manual Information Pack (Includes Users Manual, CD & Getting Started Manual) 1 4013990 Fluke Input Cap, Amp Jack Plugs for DMM's (10 packs) 1 4145825 Description W To ensure safety, use exact replacement only. On page 44, replace Figure 12 with: 2/12 4 AC172 or AC175 28 II EX Users Manual Supplement Alligator Clips Fuse Assembly *Contains 440 mA Fuse Test Lead Set Fuse 11 A, 1000 V, Fast Amp Jack Plug set 28 II Ex Manual Information Pack grt11.eps Figure 12. Replacement Parts 2/12 5 28 II EX Users Manual Supplement On page 45, Replace Table 11 with: Table 11. Accessories Item Description AC172 or AC175 Alligator Clips TL175 Silicone test lead set with probes Amp Jack Plug Set 2 Pack for DMM's I400 W AC Current Clamp [1] 80PK-27 W Temperature Probe [2] All accessories in this table are approved for use in explosive hazardous environments. Fluke accessories are available from an authorized Fluke distributor. [1] W Warning - To prevent personal injury or property damage, do not use this accessory in hazardous areas where dust is moved, transported, or conveyed. [2] W Warning - To prevent personal injury or property damage, do not use this accessory in dust hazardous areas. 2/12 6 28 II EX Users Manual Supplement On page 46, under Temperature replace Storage with: Storage -40 C to +85 C (without battery) -40 C to +60 C (with battery) On page 47, replace Certifications with: Certifications ............................. CSA, TUV, P, , ATEX, IECEx 2/12 7