Mechanical Specifications
MECHANICAL DIMENSIONS: Inches (mm)
TOLERANCES: 2 PL DEC ±0.02 (±0.51) 3 PL DEC ±0.010 (±0.254)
LEAD DIMENSIONS: 0.025 (0.635) x 0.025 (0.635) NOMINAL
Typical Single-ended Connections
Electrical Specifications
Typical at TA = +25°C and supply voltage = +5V. See DMS-30LCD
data sheet for more inf ormation.
Power Supply (V+ to GND) +5Vdc, ±5% @ 1.2mA max.
Full Scale Input See Ordering Information
Input Impedance 1 Megohm
Sampling Rate 3 Samples per second
Accuracy (VIN = +0.190V) ±2 Counts max. (±0.1%)
Display T ype 3½ Digit LCD, 0.40"/10.2mm high
Operating Temperature 0 to +60°C
Storage Temperature –20 to +75°C
Humidity (Non-condensing) 0-95%
DMS-3019X 3½ DIGIT, LCD DISPLAY DIGITAL VOLTMETERS
Ordering Inf ormation
DMS-30193 ±200mV input
DMS-30194 ±2V input
DMS-30195 ±20V input
DMS-BZL1 Bezel assembl y
DMS-BZL2 Bezel with gasket
DMS-30-CP Panel cutout punch
#2-56 INSERT
0.156 (3.96) DEEP
FRONT VIEW
1.270
(32.26)
0.187
(4.75)
OPTIONAL BEZEL (DMS-BZL1 and DMS-BZL2)
2.35 (59.69)
2.118 (53.80)
0.093 (2.362) DIAMETER (4 REQUIRED)
ONLY WHEN USING OPTIONAL BEZEL ASSEMBLY
RECOMMENDED DRILL AND PANEL CUTOUT DIMENSIONS
INTERNAL CORNER RADII:
0.032 (0.81) MAX.
1.07
(27.18) 0.878
(22.30)
0.096
(2.44)
0.116
(2.95)
2.55 (64.77)
PANEL CUTOUT
MADE IN USA
DMS-30194
0.92
(23.4)
0.84
(21.3)
0.040
(1.02)
2.17
(55.1)
2.09
(53.1) 0.040
(1.02)
0.475
(12.07) TYP.
0.40
(10.2)
TYP.
10 1
FRONT VIEW
DP1 DP2 DP3
0.40
(10.2)
0.90
(22.9)
TYP. 0.10
(2.5) TYP.
0.025 SQ.
(0.635)
®®
MADE IN USA
®®
BEZEL INSTALLATION
PANE
BEZEL
10 1
MADE IN USA
®®
10 1
RETAIN ING CLIP INSTAL L A T IO N
PANEL
A panel-mount retaining clip is supplied with all models
12 R2 1
1
123456
7
R1
®®
6
2345678910
BACK VIEW
V+
GND
DP COM
DP3
DP2
DP1
(+) INPUT
(–) INPUT
TEST
N.C.
+5V
+
–
+
–
+5V Power
Supply V
IN
D ATEL, Inc. 11 Cabot Boulev ard, Mansfield, MA 02048-1151
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
Internet: www.datel.com Email: sales@datel.com
Data sheet fax back: (508) 261-2857
DATEL (UK) LTD. Tadley, England Tel: (01256)-880444
DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: 01-34-60-01-01
DATEL GmbH München, Germany Tel: 89-544334-0
DATEL KK Tokyo, Japan Tel: 3-3779-1031, Osaka Tel: 6-354-2025
D ATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical info rmation contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do
not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.
®®
ISO 9001
ISO 9001
REGISTERED
DS-0330A 1/98