3M™ Connectors for
MicroTCA™ Applications
3M is offering Power and Signal Connectors for MicroTCA Applications as an
addition our embedded computing product line.
• PowerConnectors:ThesepinandsocketconnectorsconformtoPICMG®
MicroTCA.0R1.0standardrequirements.Theyhave24high-powercontactsand
72high-densitysignalcontactsavailablein6mmand2.25mmcontactwidths.
• SignalConnectors:Thesemezzaninecardbackplaneconnectorsconformto
PICMGAdvancedMC.0R2.0standardrequirements.Theyareavailablewith
andwithoutalignmentposts.
3M™ Power Connectors for MicroTCA™ Applications
3M™ Signal Connectors for MicroTCA™ Applications
Features and Benefits
Power Connector Signal Connector
Supports PICMG MicroTCA (AdvancedMC
1.0) specification
AdvancedMC™ Connector for MicroTCA
Applications
24 high-power contacts and 72 high-
density signal contacts Card edge connector 170 positions
Backplane and daughtercard versions Available with or without post
Press-fit termination Press-fit termination; 0.75 mm pitch
Mating force: 145 N Max.; withdrawal
force: 110 N Max.
Mating force: 100 N Max;
Withdrawal force: 65 N Max
Supports 200 mating cycles Superior signal integrity
Target Markets and Applications
Telecom and networking-access products Outdoor ruggedized applications
Fiber-to-the-premise applications Traffic control boxes
Medical applications Military/aerospace backplanes
Instrumentation and control systems Designed for hot-swap applications
Plug Connector Module
Power Module
Power
connectors
Backplane
AdvancedMC™ card
edge connector space
For MicroTCA™ Carrier
Hub (MCH) Applications
Please recycle. Printed in USA.
© 3M 2011. All rights reserved.
80-4000-7007-6
Electronic Solutions Division
Interconnect Products
6801 River Place Blvd.
Austin, TX 78726-9000
1-800-225-5373
www.3Mconnectors.com
Part Number Description Contact Positions Customer Drawing
1P02-1110-AS MicroTCA Backplane Header and Power Female Module 6.00 contact surfaces TS-2366
1P01-1110-AS MicroTCA Right Angle Socket and Power Male Module 6.00 contact surfaces TS-2367
1P00-2000-KR MicroTCA AMC Mezzanine Card Backplane Connector Without alignment post TS-2368
1P00-2001-KR MicroTCA AMC Mezzanine Card Backplane Connector With alignment post TS-2368
Product Specifications
Power Connector Signal Connector
Specifications Product
Signal Integrity Data
Available upon request
Available upon request
Available upon request
Available upon request
Materials Contacts Copper alloy, gold plating Copper alloy
Platings 0.76 µm Au / 0.38 µm PdNi+Au 0.76 µm Au
Housings Theromoplastic polyester,
glass-filled (UL 94V-0)
High temperature thermoplastic
(LCP) (UL 94V-0)
Board Finished Diameter NA 0.55 +/- 0.5 mm
Thickness NA 1.4 mm Min
Mechanical Mating Force 145 N Max 100 N Max
Withdrawal Force 110 N Max 65 N Max
Durability 200 mating cycles NA
Electrical Current Rating GND Conductor: 0.625A/pin
Power Branch GNA Conductor: 11.625A/pin NA
Insulation Resistance Signal GND Conductor: 25milliohms
Power Branch GND Conductor: 5milliohms NA
Withstanding Voltage 80V r.m.s NA
3M™ Connectors for MicroTCA™ Applications
Thefollowingpartsareavailableaspartofthe3Mbackplaneconnectorproductfamily:
3M is a trademark of 3M Company.
ATCA, AdvancedTCA, and CompactPCI are registered trademarks of PCI Industrial Computer Manufacturers Group. MicroTCA and AdvancedMC are trademarks of PCI
Industrial Computer Manufacturers Group.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.