SPEC NO: DSAD1462 REV NO: V.6 DATE: MAR/24/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000129
3.81mmx19.05mm LED LIGHT BAR
Part Number: KB2635EW High Efficiency Red
Features
zUniform light emitting area.
zLow current operation.
zEasily mounted on P.C. boards.
zFlush mountable.
zExcellent on/off contrast.
zCan be used with panels and legend mounts.
zRoHS compliant.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
1. Al dimensions are in milimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice
SPEC NO: DSAD1462 REV NO: V.6 DATE: MAR/24/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000129
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Min. Typ.
KB2635EW High Efficiency Red (GaAsP/GaP) White Diffused 10 60
Iv (mcd) [1]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red 625 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA
IR Reverse Current High Efficiency Red 10 uA VR=5V
Parameter High Efficiency Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAD1462 REV NO: V.6 DATE: MAR/24/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000129
High Efficiency Red KB2635EW
SPEC NO: DSAD1462 REV NO: V.6 DATE: MAR/24/2011 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000129
PACKING & LABEL SPECIFICATIONS KB2635EW
SPEC NO: DSAD1462 REV NO: V.6 DATE: MAR/24/2011 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000129
SPEC NO: DSAD1462 REV NO: V.6 DATE: MAR/24/2011 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000129
