TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
7-30
GLASS PASSIVATED SURFACE MOUNT UNIPOLAR FLIP-DIE
ZENER VOLTAGE- 6.8 TO 200 VOLTS
.5 TO 10 WATT MAXIMUM POWER DISSIPATION
.5 TO 10 WATT UNIPOLAR
ZENER FLIP-DIE
CUSTOM ORDERING SPECIFIER
SZFD - - -
DIE SPECIFICATIONS
UNIPOLAR
ZENER
FLIP-DIE
.5 TO 10 WATT ZENER
FLIP-DIE SPECIFICATIONS
♦Exclusive Sussex Semiconductor Flip-Die T echnology
♦Each Die Fully Glass Passivated: Needs No
Encapsulation
♦Unipolar
♦Each Device Individually Inspected
♦Available in Waffle Packs or Tape and Reel
♦Operating Temperature: -65 to 150ºC
♦Storage Temperature: -65 to 175ºC
♦Metallization: Ni-Ni-Au
♦Polarity:
6.8 to 10 Nominal Zener Volts (Vz) 11 to 200 Nominal Zener Volts (Vz)
A-Cathode A-Anode
B-Anode B-Cathode
REFER TO PAGE 7-31
FOR A LISTING OF OUR
STANDARD PARTS
CONTACT F ACTORY FOR ELECTRICAL
SPECIFICATIONS ON CUSTOM PARTS
NOMINAL ZENER
VOLTAGE
ZENER TEST
CURRENT(mA)
%TOLERANCE OF VZ
TOLERANCES
CODE TOLERANCE
5 ±5%
10 ±10%
20 ±20%
‘A’-SIDE METALLIZATION
CODE MATERIAL
A ALUMINUM
E GOLD
BLANK NI-NI-AU
(STANDARD)
SIZE CODE C D E F G
POWER
HANDLING
SIZE CODE C D E F G
POWER
HANDLING
0. 25 0. 01 8 0. 01 0 0. 00 5 0. 02 7 0.01 1 1/ 2 WATT 8 0. 10 0 0. 08 5 0. 04 2 0.15 0 0. 01 1 8 WATTS
0. 75 0. 03 0 0. 02 0 0. 01 0 0. 04 5 0.01 1 3/ 4 WATT 16 0. 11 5 0. 10 0 0. 05 1 0.17 5 0. 01 1 10 WATTS
1 0. 04 0 0. 02 8 0. 01 4 0. 06 0 0.01 1 1 WATT
1. 5 0. 05 5 0. 04 0 0. 02 0 0. 08 3 0.01 1 3 WATTS
2 0. 07 0 0. 05 5 0. 02 7 0. 10 5 0.01 1 4 WATTS
3 0. 08 5 0. 07 0 0. 03 3 0. 12 8 0.01 1 5 WATTS
T AB LE 2C - UNIPOLAR FLIP-D IE DIM ENSION SPECIFICAT IONS
♦
A LL TOLERAN CES ARE ± .0 05"
♦
ALL DIMENSIO NS ARE IN INCHES
7-31
NOTES
NOTE 1: ♦ ELECTRICAL CHARA CTERISTICS MEASURED AT A JUNCTION TEMPERATURE (TJ) OF 25°C UNLESS O THERWISE STATED
NOTE 2: ♦ JEDEC PART NUMBERS REFER T O PACKA GED DEVICES. THE DIES INDICATED BY THESE NUMBERS, IF PR OPERLY PACKA GED , WILL OPERATE WITH THE SAME
PERFORMANCE
NOTE 3: ♦ VZ MEASURED AT JUNCTION AND CASE TEMPERATURE BOTH AT 25°C
NOTE 4: ♦ ZENER IMPEDANCE IS DERIVED FROM 60HZ AC V O LTAGE WHICH RESULTS WHEN AN A C CURRENT RMS V ALUE EQ U AL TO 10% OF D.C ZENER CURRENT IS
SUPERIMPOSED ON IZT
NOTE 5: ♦ IZM V ALUES DERIVED FOR A ±5% VZ TOLERANCE
♦ IZM IS THE VALUE OF ZENER CURRENT A T WHICH POINT MAX PO WER DISSIPATION RESULTS
THIS TABLE CONTINUES
JEDEC PART
NUMBER
(NOTE 2)
SUSSEX
OR DER
CO DE
NOMINAL
ZENER
VOLTAGE
VZ @ IZT
(N OTE 3 )
VOLTS
ZENE R
TEST
CURRENT
(IZT)
mA
ZENER
IMPEDANCE
ZZT @ IZT
(N OTE 4 )
OHMS µA VOLTS
TYPICAL
ZENE R
V OLTAGE
TE MP.
COEFF.
%/°C
MAX. DC
ZENER
CURRENT
(IZM) @ 75°C
(N OTE 5 )
mA
MAX
POWER
DISSIPATION
WATTS
1N4158A 1-6.8-5-37 6.8 37.0 3.5 500 5.2 0.040 140.0 1
1N4159A 1-7.5-5-34 7.5 34.0 4 300 5.7 0.040 125.0 1
1N4160A 1-8.2-5-31 8.2 31.0 4.5 200 6.2 0.050 115.0 1
1N4161A 1-9.1-5-28 9.1 28.0 5 100 6.9 0.060 105.0 1
1N4162A 1-10-5-25 10 25.0 7 40 7.6 0.070 95.0 1
1N4163A 1-11-5-23 11 23.0 8 10 9.1 0.070 85.0 1
1N4164A 1-12-5-21 12 21.0 9 10 9.9 0.070 80.0 1
1N4165A 1-13-5-19 13 19.0 10 10 10.6 0.070 74.0 1
1N4166A 1-15-5-17 15 17.0 14 10 11.4 0.080 63.0 1
1N4167A 1-16-5-15.5 16 15.5 16 5 12.1 0.080 60.0 1
1N4168A 1-18-5-14 18 14.0 20 5 13.7 0.080 52.0 1
1N4169A 1-20-5-12.5 20 12.5 22 5 15.2 0.080 47.0 1
1N4170A 1-22-5-11.5 22 11.5 23 5 16.7 0.090 43.0 1
1N4171A 1-24-5-10.5 24 10.5 25 5 18.2 0.090 40.0 1
1N4172A 1-27-5-9.5 27 9.5 35 1 20.5 0.090 35.0 1
1N4173A 1-30-5-8.5 30 8.5 40 1 22.8 0.090 31.0 1
1N4174A 1-33-5-7.5 33 7.5 45 1 25.1 0.095 28.0 1
1N4175A 1-36-5-7 36 7.0 50 1 27.3 0.095 26.0 1
1N4176A 1-39-5-6.5 39 6.5 60 1 30.4 0.095 24.0 1
1N4177A 1-43-5-6 43 6.0 70 1 34.2 0.095 22.0 1
1N4178A 1-47-5-5.5 47 5.5 80 1 38.0 0.095 20.0 1
1N4179A 1-51-5-5 51 5.0 95 1 42.5 0.095 17.0 1
1N4180A 1-56-5-4.5 56 4.5 110 1 45.6 0.095 15.0 1
1N4181A 1-62-5-4 62 4.0 125 1 47.1 0.095 14.5 1
1N4182A 1-68-5-3.7 68 3.7 150 1 53.2 0.095 14.0 1
1N4183A 1-75-5-3.3 75 3.3 175 1 57.0 0.095 12.0 1
1N4184A 1-82-5-3 82 3.0 200 1 60.8 0.100 11.0 1
1N4185A 1-91-5-2.8 91 2.8 250 1 68.4 0.100 10.0 1
1N4186A 1-100-5-2.5 100 2.5 350 1 76.0 0.100 9.5 1
1N4187A 1-110-5-2.3 110 2.3 450 1 83.6 0.100 8.5 1
1N4188A 1-120-5-2 120 2.0 550 1 91.2 0.100 8.0 1
1N4189A 1-130-5-1.9 130 1.9 700 1 98.8 0.100 7.2 1
1N4190A 1-150-5-1.7 150 1.7 1000 1 114.0 0.100 6.3 1
1N4191A 1-160-5-1.6 160 1.6 1100 1 121.0 0.100 5.9 1
1N4192A 1-180-5-1.4 180 1.4 1200 1 137.0 0.100 5.2 1
1N4193A 1-200-10-1.2 200 1.2 1500 1 152.0 0.100 4.7 1
T A B L E 3 C - Z EN ER DIE ELEC TRICA L SPEC IF ICA TIONS (NOT E 1)
MAX. REVERS E
LEAKAGE
CURRENT
RE FER TO PAGE
7- 36 FOR ORDER
SPECIFIER
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
ZENER DIE
SPECIFICATIONS
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
7-32
ZENER DIE
SPECIFICATIONS CONTINUED
NOTES
NOTE 1: ♦ ELECTRICAL CHARA CTERISTICS MEASURED AT A JUNCTION TEMPERATURE (TJ) OF 25°C UNLESS O THERWISE STATED
NOTE 2: ♦ JEDEC PART NUMBERS REFER T O PACKA GED DEVICES. THE DIES INDICATED BY THESE NUMBERS, IF PR OPERLY PACKA GED , WILL OPERATE WITH THE SAME
PERFORMANCE
NOTE 3: ♦ VZ MEASURED AT JUNCTION AND CASE TEMPERATURE BOTH AT 25°C
NOTE 4: ♦ ZENER IMPEDANCE IS DERIVED FROM 60HZ AC V O LTAGE WHICH RESULTS WHEN AN A C CURRENT RMS V ALUE EQ U AL TO 10% OF D.C ZENER CURRENT IS
SUPERIMPOSED ON IZT
NOTE 5: ♦ IZM V ALUES DERIVED FOR A ±5% VZ TOLERANCE
♦ IZM IS THE VALUE OF ZENER CURRENT AT WHICH POINT MAX. POWER DISSIPATION RESUL TS
THIS TABLE CONTINUES
JEDEC PART
NUMBER
(NO TE 2 )
SUSSEX
ORDER
CODE
NOMINAL
ZENER
VOLTAGE
VZ @ IZT
(NOTE 3)
VOLTS
ZENER
TEST
CURRENT
(IZT)
mA
ZENER
IMPEDANCE
ZZT @ IZT
(NOTE 4)
OHMS
IR
µA VDC
VOLTS
TYPIC AL
ZENER
VOLTAGE
TEMP.
COEFF.
%/°C
MAX. DC
ZENER
CURRENT
(IZM) @ 75°C
(NOTE 5)
mA
MAX
POWER
DISSIPATION
WATTS
1N5063 1.5-6.8-5-75 6.8 75.0 2 500 5.2 0.040 440.0 3
1N5064 1.5-7.5-5-75 7.5 75.0 2 300 5.7 0.040 400.0 3
1N5065 1.5-8.2-5-75 8.2 75.0 3 200 6.2 0.050 360.0 3
1N5066 1.5-9.1-5-75 9.1 75.0 3 100 6.9 0.060 330.0 3
1N5067 1.5-10-5-75 10 75.0 4 40 7.6 0.070 300.0 3
1N5068 1.5-12-5-70 11 70.0 5 10 9.1 0.070 250.0 3
1N5069 1.5-13-5-50 13 50.0 6 10 9.9 0.070 230.0 3
1N5070 1.5-14-5-50 14 50.0 6 10 10.6 0.070 210.0 3
1N5071 1.5-15-5-50 15 50.0 6 10 11.4 0.080 200.0 3
1N5072 1.5-16-5-50 16 50.0 7 5 12.1 0.080 185.0 3
1N5073 1.5-18-5-40 18 40.0 8 5 13.7 0.080 170.0 3
1N5074 1.5-22-5-30 22 30.0 10 5 16.7 0.090 135.0 3
1N5075 1.5-24-5-30 24 30.0 10 5 18.2 0.090 125.0 3
1N5076 1.5-27-5-25 27 25.0 12 1 20.5 0.090 110.0 3
1N5077 1.5-30-5-25 30 25.0 15 1 22.8 0.090 100.0 3
1N5078 1.5-33-5-20 33 20.0 21 1 25.1 0.095 90.0 3
1N5079 1.5-36-5-20 36 20.0 21 1 27.3 0.095 85.0 3
1N5080 1.5-39-5-20 39 20.0 27 1 29.5 0.095 80.0 3
1N5081 1.5-40-5-20 40 20.0 27 1 30.4 0.095 75.0 3
1N5082 1.5-43-5-15 43 15.0 35 1 32.6 0.095 70.0 3
1N5083 1.5-45-5-15 45 15.0 37 1 34.2 0.095 65.0 3
1N5084 1.5-47-5-15 47 15.0 43 1 35.7 0.095 60.0 3
1N5085 1.5-50-5-10 50 15.0 50 1 38.0 0.095 60.0 3
1N5086 1.5-51-5-15 51 15.0 50 1 38.7 0.095 55.0 3
1N5087 1.5-56-5-10 56 10.0 70 1 42.5 0.095 55.0 3
1N5088 1.5-60-5-10 60 10.0 70 1 45.6 0.095 50.0 3
1N5089 1.5-62-5-10 62 10.0 75 1 47.1 0.095 50.0 3
1N5090 1.5-68-5-10 68 10.0 85 1 51.9 0.095 45.0 3
1N5091 1.5-70-5-10 70 10.0 90 1 53.2 0.095 45.0 3
1N5092 1.5-75-5-10 75 10.0 100 1 57.0 0.095 40.0 3
1N5093 1.5-80-5-10 80 10.0 115 1 60.8 0.100 35.0 3
1N5094 1.5-82-5-10 82 10.0 120 1 68.4 0.100 30.0 3
1N5095 1.8-91-5-8 91 8.0 155 1 76.0 0.100 30.0 3
1N5096 1.5-110-5-5 110 5.0 250 1 83.6 0.100 25.0 3
1N5097 1.5-120-5-5 120 5.0 325 1 91.2 0.100 25.0 3
1N5098 1.5-130-5-5 130 5.0 375 1 98.8 0.100 20.0 3
1N5099 1.5-140-5-5 140 5.0 550 1 106.0 0.100 20.0 3
1N5100 1.5-160-5-4 160 4.0 700 1 121.0 0.100 20.0 3
1N5101 1.5-170-5-4 170 4.0 750 1 129.0 0.100 18.0 3
1N5102 1.5-180-5-4 180 4.0 850 1 137.0 0.100 18.0 3
1N5103 1.5-190-5-4 190 4.0 900 1 144.0 0.100 15.0 3
1N5104 1.5-200-5-4 200 4.0 950 1 152.0 0.100 15.0 3
T A BL E 3 C (C O NT I N UED ) - Z EN ER D I E EL ECT R I CA L SPECI FI CA T I O NS (NO T E 1 )
MAX. REVERSE
LEAKAGE CURRENT
(IR) @ VDC
REFER TO PAGE
7-36 F OR ORDER
SPECIFIER
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
7-33
ZENER DIE
SPECIFICATIONS CONTINUED
NOTES
NOTE 1: ♦ ELECTRICAL CHARA CTERISTICS MEASURED AT A JUNCTION TEMPERATURE (TJ) OF 25°C UNLESS O THERWISE STATED
NOTE 2: ♦ JEDEC PART NUMBERS REFER T O PACKA GED DEVICES. THE DIES INDICATED BY THESE NUMBERS, IF PR OPERLY PACKAGED, WILL OPERATE WITH THE SAME
PERFORMANCE
NOTE 3: ♦ VZ MEASURED AT JUNCTION AND CASE TEMPERATURE BOTH AT 25°C
NOTE 4: ♦ ZENER IMPEDANCE IS DERIVED FROM 60HZ AC V O LTAGE WHICH RESULTS WHEN AN A C CURRENT RMS V ALUE EQ U AL TO 10% OF D.C ZENER CURRENT IS
SUPERIMPOSED ON IZT
NOTE 5: ♦ IZM VALUES DERIVED FOR A ±5% VZ TOLERANCE
♦ IZM IS THE VALUE OF ZENER CURRENT AT WHICH POINT MAX. POWER DISSIPATION RESULTS
THIS TABLE CONTINUES
JEDEC PART
NUMBER
(NOTE 2)
SUSSEX
O RDER
CO DE
NOMINAL
ZENER
VOLTAGE
VZ @ IZT
(NOTE 3)
VOLTS
ZENER
TEST
CURRENT
(IZT)
mA
ZENER
IMPEDANCE
ZZT @ IZT
(NOTE 4)
OHMS
IR
µA VDC
VOLTS
TYPICAL
ZENER
VOLTAGE
TEMP.
COEFF.
%/°C
MAX. DC
ZENER
CURRENT
(IZM) @ 75°C
(N OTE 5)
mA
MAX
POWER
DISSIPATION
WATTS
1N4954 3-6.8-5-175 6.8 175.0 1 500 5.2 0.050 670.0 5
1N4955 3-7.5-5-175 7.5 175.0 1.5 400 5.7 0.060 620.0 5
1N4956 3-8.2-5-l50 8.2 150.0 1.5 200 6.2 0.060 570.0 5
1N4957 3-9.l-5-l50 9.1 150.0 2 100 6.9 0.060 510.0 5
1N4958 3-10-5-125 10 125.0 2 75 7.6 0.070 470.0 5
1N4959 3-11-5-125 11 125.0 2.5 75 8.3 0.070 435.0 5
1N4960 3-12-5-l00 12 100.0 2.5 50 9.1 0.070 385.0 5
1N4961 3-13-5-100 13 100.0 3 25 9.9 0.080 350.0 5
1N4962 3-15-5-75 15 75.0 3.5 15 11.4 0.080 300.0 5
1N4963 3-16-5-75 16 75.0 3.5 10 12.2 0.080 275.0 5
1N4964 3-18-5-65 18 65.0 4 10 13.7 0.085 255.0 5
1N4965 3-20-5-65 20 65.0 4.5 10 15.2 0.085 220.0 5
1N4966 3-22-5-50 22 50.0 5 10 16.7 0.085 195.0 5
1N4967 3-24-5-50 24 50.0 5 10 18.2 0.090 180.0 5
1N4968 3-27-5-50 27 50.0 6 10 20.6 0.090 155.0 5
1N4969 3-30-5-40 30 40.0 8 10 22.8 0.090 140.0 5
1N4970 3-33-5-40 33 40.0 10 5 25.1 0.090 130.0 5
1N4971 3-36-5-30 36 30.0 11 5 27.4 0.095 120.0 5
1N4972 3-39-5-30 39 30.0 14 5 29.6 0.095 105.0 5
1N4973 3-43-5-30 43 30.0 20 5 32.6 0.095 95.0 5
1N4974 3-47-5-25 47 25.0 25 5 35.7 0.095 90.0 5
1N4975 3-51-5-25 51 25.0 27 5 38.0 0.095 85.0 5
1N4976 3-56-5-20 56 20.0 35 5 42.6 0.095 80.0 5
1N4977 3-62-5-20 62 20.0 42 5 47.1 0.100 75.0 5
1N4978 3-68-5-20 68 20.0 44 5 51.6 0.100 65.0 5
1N4979 3-75-5-20 75 20.0 45 5 56.0 0.100 60.0 5
1N4980 3-82-5-15 82 15.0 65 5 62.3 0.100 55.0 5
1N4981 3-91-5-15 91 15.0 75 5 68.4 0.100 50.0 5
1N4982 3-100-5-10 100 12.0 90 5 76.0 0.100 45.0 5
1N4983 3-110-5-10 110 12.0 125 5 83.6 0.100 40.0 5
1N4984 3-120-5-10 120 10.0 170 5 91.2 0.100 38.0 5
1N4985 3-130-5-10 130 10.0 190 5 98.8 0.105 35.0 5
1N4986 3-150-5-8 150 8.0 330 5 114.0 0.105 31.0 5
1N4987 3-160-5-8 160 8.0 350 5 122.0 0.105 30.0 5
1N4988 3-180-5-5 180 5.0 450 5 137.0 0.110 25.0 5
1N4989 3-200-5-5 200 5.0 500 5 152.0 0.110 22.0 5
T ABLE 3 C (CONTINUED) - ZENER DIE ELECTR ICAL SPECIF ICAT IO N S (NO TE 1 )
RE FER TO PAGE
3 3 FOR ORDER
SPECIFIER
MAX. REVERSE
LEAKAGE CURRE NT
(
IR
)
@ VDC
RE FER TO PAGE
7- 36 FOR ORDER
SPECIFIER
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
7-34
ZENER DIE
SPECIFICATIONS CONTINUED
NOTES
NOTE 1: ♦ ELECTRICAL CHARA CTERISTICS MEASURED AT A JUNCTION TEMPERATURE (TJ) OF 25°C UNLESS OTHERWISE STATED
NOTE 2: ♦ JEDEC PART NUMBERS REFER T O PACKA GED DEVICES. THE DIES INDICATED BY THESE NUMBERS, IF PR OPERLY P A CKAGED, WILL OPERATE WITH THE SAME
PERFORMANCE
NOTE 3: ♦ VZ MEASURED AT JUNCTION AND CASE TEMPERATURE BOTH AT 25°C
NOTE 4: ♦ ZENER IMPEDANCE IS DERIVED FROM 60HZ AC V O LTAGE WHICH RESULTS WHEN AN A C CURRENT RMS V ALUE EQ U AL TO 10% OF D.C ZENER CURRENT IS
SUPERIMPOSED ON IZT
NOTE 5: ♦ IZM VALUES DERIVED FOR A ±5% VZ TOLERANCE
♦ IZM IS THE VALUE OF ZENER CURRENT AT WHICH POINT DIE POWER DISSIPATION RESULTS
THIS TABLE CONTINUES
JEDEC PART
NUMBER
(N O TE 2)
SUSSEX
ORDER
CODE
NOM INA L
ZENER
VOLTAGE
VZ @ I
ZT
(NOTE 3)
VOLTS
ZENER
TEST
C U RRENT
(IZT)
mA
ZENER
IM P EDAN CE
ZZT @ I
ZT
(NOTE 4)
OHMS IR
µA VDC
VOLTS
TYPICA L
ZENER
V OLTAGE
TEMP.
C O EFF.
%/°C
MAX. DC
ZEN ER
C U RRENT
(IZM) @ 75°C
(NOTE 5)
mA
MAX
POWE R
DISSI PATION
WATTS
1N2970B 16-6.8-5-370 6.8 370 1.2 150 5.2 .040 1320 10
1N2971B 16-7.5-5-335 7.5 335 1.3 100 5.7 .045 1180 10
1N2972B 16-8.2-5-305 8.2 305 1.5 50 6.2 .048 1040 10
1N2973B 16-9.1-5-275 9.1 275 2.0 25 6.9 .051 960 10
1N2974B 16-10-5-250 10.0 250 3.0 25 7.6 .055 860 10
1N2975B 16-11-5-230 11.0 230 3.0 10 8.4 .060 780 10
1N2976B 16-12-5-210 12.0 210 3.0 10 9.1 .065 720 10
1N2977B 16-13-5-190 13.0 190 3.0 10 9.9 .065 660 10
1N2978B 16-14-5-180 14.0 180 3.0 10 10.5 .070 600 10
1N2979B 16-15-5-170 15.0 170 3.0 10 11.4 .070 560 10
1N2980B 16-16-5-155 16.0 155 4.0 10 12.2 .070 530 10
1N2981B 16-17-5-145 17.0 145 4.0 10 13.0 .075 500 10
1N2982B 16-18-5-140 18.0 140 4.0 10 13.7 .075 460 10
1N2983B 16-19-5-130 19.0 130 4.0 10 14.0 .075 440 10
1N2984B 16-20-5-125 20.0 125 4.0 10 15.2 .075 420 10
1N2985B 16-22-5-115 22.0 115 5.0 10 16.7 .080 380 10
1N2986B 16-24-5-105 24.0 105 5.0 10 18.2 .080 350 10
1N2987B 16-25-5-100 25.0 100 6.0 10 18.2 .080 310 10
1N2988B 16-27-5-95 27.0 95 7.0 10 20.6 .085 300 10
1N2989B 16-30-5-85 30.0 85 8.0 10 22.8 .085 280 10
1N2990B 16-33-5-75 33.0 75 9.0 10 25.1 .085 260 10
1N2991B 16-36-5-70 36.0 70 10.0 10 27.4 .085 230 10
1N2992B 16-39-5-65 39.0 65 11.0 10 29.7 .090 210 10
1N2993B 16-43-5-60 43.0 60 12.0 10 32.7 .090 195 10
1N2994B 16-45-5-55 45.0 55 13.0 10 33.0 .090 185 10
1N2995B 16-47-5-55 47.0 55 14.0 10 35.8 .090 175 10
1N2996B 16-50-5-50 50.0 50 15.0 10 36.0 .090 165 10
1N2997B 16-51-5-50 51.0 50 15.0 10 38.8 .090 160 10
1N2998B 16-52-5-50 52.0 50 15.0 10 39.0 .090 160 10
1N2999B 16-56-5-45 56.0 45 16.0 10 42.6 .090 150 10
1N3000B 16-62-5-40 62.0 40 17.0 10 47.1 .090 130 10
1N3001B 16-68-5-37 68.0 37 18.0 10 51.7 .090 120 10
1N3002B 16-75-5-33 75.0 33 22.0 10 56.0 .090 110 10
1N3003B 16-82-5-30 82.0 30 25 10 62.2 .090 100 10
1N3004B 16-91-5-28 91.0 28 35 10 69.2 .090 85 10
1N3005B 16-100-5-25 100.0 25 40 10 76.0 .090 80 10
1N3006B 16-105-5-25 105.0 25 45 10 76.0 .095 75 10
1N3007B 16-110-5-23 110.0 23 55 10 83.6 .095 72 10
1N3008B 16-120-5-20 120.0 20 75 10 91.2 .095 67 10
1N3009B 16-130-5-19 130.0 19 100 10 98.8 .095 62 10
1N3010B 16-140-5-18 140.0 18 125 10 100.0 .095 58 10
1N3011B 16-150-5-17 150.0 17 175 10 114.0 .095 54 10
1N3012B 16-160-5-16 160.0 16 200 10 121.6 .095 50 10
1N3013B 16-175-5-14 175.0 14 250 10 135.0 .095 46 10
1N3014B 16-180-5-14 180.0 14 260 10 136.8 .095 45 10
1N3015B 16-200-5-12 200.0 12 300 10 152.0 .100 40 10
TABL E 3C (CO NTINUED) - ZENER DIE EL ECTRICAL SPECIFICATIO NS (NOTE 1)
REFER T O PAGE
23 FOR ORDER
S PE CIF IE R
REFER T O PAGE
33 FOR ORDER
S PE CIF IE R
M AX . REV ERS E
LEAKAGE CURRENT
(IR) @ VDC
REFER T O PAGE
7-36 F OR ORDER
S PE CIF IE R
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
7-35
ZENER DIE
SPECIFICATIONS CONTINUED
NOTES
NOTE 1: ♦ ELECTRICAL CHARA CTERISTICS MEASURED AT A JUNCTION TEMPERATURE (TJ) OF 25°C UNLESS OTHERWISE STATED
NOTE 2: ♦ JEDEC PART NUMBERS REFER T O PACKA GED DEVICES. THE DIES INDICATED BY THESE NUMBERS, IF PR OPERLY P A CKA GED , WILL OPERATE WITH THE SAME
PERFORMANCE
NOTE 3: ♦ VZ MEASURED AT JUNCTION AND CASE TEMPERATURE BOTH AT 25°C
NOTE 4: ♦ ZENER IMPEDANCE IS DERIVED FROM 60HZ AC V O LTAGE WHICH RESULTS WHEN AN A C CURRENT RMS V ALUE EQ U AL TO 10% OF D.C ZENER CURRENT IS
SUPERIMPOSED ON IZT
NOTE 5: ♦ IZM V ALUES DERIVED FOR A ±5% VZ TOLERANCE
♦ IZM IS THE VALUE OF ZENER CURRENT A T WHICH POINT DIE PO WER DISSIPA TION RESULTS
JEDEC
PART
NUMBER
(N O TE 2)
SUSSEX
ORDER
CODE
NOM INAL
ZENER
VOLTAGE
VZ @ I
ZT
(NOTE 3)
VOLTS
Z ENER T ES T
CURRENT
(IZT)
mA
Z ENER
IM P ED ANC E
ZZT @ I
ZT
(NOTE 4)
OHM S IR
µA VDC
VOLTS
TYPICAL
ZENER
VOLTAGE
TEMP.
COEFF.
%/°C
MAX. DC
ZENER
CURRENT
(IZM) @ 75 °C
( NOT E 5 )
mA
M A X POW ER
DISSIPATION
WATTS
1N3305B 35-6.8-5-1850 6.8 1850 0.2 150 4.5 .040 6600 50
1N3306B 35-7.5-5-1700 7.5 1700 0.3 100 5.0 .045 5900 50
1N3307B 35-8.2-5-1500 8.2 1500 0.4 50 5.4 .048 5200 50
1N3308B 35-9.1-5-1370 9.1 1370 0.5 25 6.1 .050 4800 50
1N3309B 35-10-5-1200 10.0 1200 0.6 25 6.7 .055 4300 50
1N3310B 35-11-5-1100 11.0 1100 0.8 10 8.4 .060 3900 50
1N3311B 35-12-5-1000 12.0 1000 1.0 10 9.1 .065 3800 50
1N3312B 35-13-5-960 13.0 960 1.1 10 9.9 .065 3300 50
1N3313B 35-14-5-890 14.0 890 1.2 10 11.4 .070 3000 50
1N3314B 35-15-5-830 15.0 830 1.4 10 11.4 .070 2800 50
1N3315B 35-16-5-780 16.0 780 1.6 10 12.2 .070 2650 50
1N3316B 35-17-5-740 17.0 740 1.8 10 13.0 .075 2500 50
1N3317B 35-18-5-700 18.0 700 2.0 10 13.7 .075 2300 50
1N3318B 35-19-5-660 19.0 660 2.2 10 13.7 .075 2200 50
1N3319B 35-20-5-630 20.0 630 2.4 10 15.2 .075 2100 50
1N3320B 35-22-5-570 22.0 570 2.5 10 16.7 .080 1900 50
1N3321B 35-24-5-520 24.0 520 2.6 10 18.2 .080 1750 50
1N3322B 35-25-5-500 25.0 500 2.7 10 18.2 .080 1550 50
1N3323B 35-27-5-460 27.0 460 2.8 10 20.6 .085 1500 50
1N3324B 35-30-5-420 30.0 420 3.0 10 22.8 .085 1400 50
1N3325B 35-33-5-380 33.0 380 3.2 10 25.1 .085 1300 50
1N3326B 35-36-5-350 36.0 350 3.5 10 27.4 .085 1150 50
1N3327B 35-39-5-320 39.0 320 4.0 10 29.7 .090 1050 50
1N3328B 35-43-5-290 43.0 290 4.5 10 32.7 .090 975 50
1N3329B 35-45-5-280 45.0 280 4.5 10 32.7 .090 930 50
1N3330B 35-47-5-270 47.0 270 5.0 10 35.8 .090 880 50
1N3331B 35-50-5-250 50.0 250 5.0 10 38.0 .090 830 50
1N3332B 35-51-5-245 51.0 245 5.2 10 38.8 .090 810 50
1N3333B 35-52-5-240 52.0 240 5.5 10 42.6 .090 790 50
1N3334B 35-56-5-220 56.0 220 6.0 10 42.6 .090 740 50
1N3335B 35-62-5-200 62.0 200 7.0 10 47.1 .090 660 50
1N3336B 35-68-5-180 68.0 180 8.0 10 51.7 .090 600 50
1N3337B 35-75-5-170 75.0 170 9.0 10 56.0 .090 540 50
1N3338B 35-82-5-150 82.0 150 11 10 62.2 .090 490 50
1N3339B 35-91-5-140 91.0 140 15 10 69.2 .090 420 50
1N3340B 35-100-5-120 100.0 120 20 10 76.0 .090 400 50
1N3341B 35-105-5-120 105.0 120 25 10 83.0 .095 380 50
1N3342B 35-110-5-110 110.0 110 30 10 83.0 .095 365 50
1N3343B 35-120-5-100 120.0 100 40 10 91.2 .095 335 50
1N3344B 35-130-5-95 130.0 95 50 10 99.8 .095 310 50
1N3345B 35-140-5-90 140.0 90 60 10 114.0 .095 290 50
1N3346B 35-150-5-85 150.0 85 75 10 114.0 .095 270 50
1N3347B 35-160-5-80 160.0 80 80 10 121.6 .095 250 50
1N3348B 35-175-5-70 175.0 70 85 10 121.6 .095 230 50
1N3349B 35-180-5-68 180.0 68 90 10 136.8 .095 220 50
1N3350B 35-200-5-65 200.0 65 100 10 152.0 .100 200 50
TABLE 3C (CO NTINUED) - ZENER DIE ELECTRICAL SP ECIFICATIONS (NO TE 1)
REFER T O PAGE
23 FOR OR DER
S PE CIF IE R
REFER T O PAGE
33 FOR OR DER
S PE CIF IE R
M A X . REVERS E
LEAKAGE CURRENT
(IR) @ VDC
RE FE R TO PA GE 7-36
FOR ORD ER
SPECIFIER
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
7-36
ZENER DIE
SPECIFICATIONS CONTINUED
ORDERING SPECIFIER
0
25
50
75
100
0 25 50 75 100 125 150 175 200
% RATED POWER DISSIPATION
JUNCTION TEMPERA TURE ,TJ (°C) ZENER CURRENT (mA)
ZENER IMPEDANCE (Ohms)
FIGURE 1C - STEADY-STATE
DERATING CURVE
6.8 - 10 - 75
ORDER CODE FROM
PREVIOUS PA GE
10-1
100
101
102
103
104
100101102103104
35-6.8-5-1850
16-10-5-250
35-75-5-170
16-75-5-33
35-200-5-65
16-200-5-12
FIGURE 2C - ZENER IMPEDANCE VS.
ZENER CURRENT
SZ STANDARD UNIPOLAR DIE
SZFD FLIP-DIE (1/2 TO 10 WATT ONLY)
CODE DESCRIPTION
CODE DIE T YPE DIE SPECIF ICAT IO NS
REFER T O: CODE DIE TYPE DIE SPECIF ICAT IO NS
REFER T O:
0.2 5 1/2 WATT UNIPOLAR DIE PAG E 7-2 9 AND 7-3 0 16 1 6 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0
0.7 5 3/4 WATT UNIPOLAR DIE PAG E 7-2 9 AND 7-3 0 25 2 5 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0
1 1 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0 30 4 0 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0
1.5 3 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0 35 5 0 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0
2 4 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0 40 6 0 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0
3 5 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0 70 7 5 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0
8 8 WAT T UNIPOL AR DIE PAG E 7-2 9 AND 7-3 0 10 0 10 0 WAT T UNI POL AR DIE PAGE 7 - 29 AND 7- 30
TABLE 4C - AVAILABLE DIE SIZES
