Advanced Power Electronics Corp. APE8912/APE8913 1.2V/1.32V 1A LOW DROPOUT FIXED-MODE REGULATOR FEATURES DESCRIPTION 1.5V Maximum Dropout at Full Load Current Fast Transient Response Output Current Limiting Built-in Thermal Shutdown Needs Only 1uF Capacitor for Stability Good Noise Rejection 3-Terminal Fixed 1.2V/1.32V APE891X is a low dropout fixed-mode regulator with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 1.2V/1.32V logic supply. APE891X is guaranteed to have lower than 1.5V dropout at full load current making it ideal to provide wellregulated outputs of 1.2/1.32 with 3V to 6V input supply. Low ESR Ceramic Capacitor for Output Stability Packages : SOT-223, TO-252, SOT-89(R-type) & SOT-223(R-type) RoHS Compliant APPLICATIONS PC Peripheral Communication LCD Modules TYPICAL APPLICATION Figure 2. 1.32V fixed output Figure 1. 1.2V fixed output PACKAGE ORDERING INFORMATION APE891XX Output Voltage 2 : 1.2V Fixed 3 : 1.32V Fixed Package Type G : SOT-89-3L GR : SOT-89-3L H : TO-252-3L K : SOT-223-3L KR : SOT-223-3L Data and specifications subject to change without notice 1 200907138 Advanced Power Electronics Corp. APE8912/APE8913 ABSOLUTE MAXIMUM RATINGS VIN Supply Voltage(VIN) -0.3 to 6 V Power Dissipation(PD) Internal Limited Storage Temperature Range(TST) -65 to 150C Operating Temperature Range(TOP) 0 to 150C Thermal Resistance from Junction to Case(Rth JC) SOT-89 100C/W SOT-223 15C/W SOT-252 Thermal Resistance from Junction to Ambient(Rth JA) 10C/W SOT-89 300C/W SOT-223 117C/W SOT-252 92C/W PACKAGE INFORMATION SOT-223 R-type SOT-223 TO-252 SOT-89 VIN VOUT VIN VOUT GND VOUT GND VIN R-type SOT-89 VIN VOUT VOUT GND GND VIN GND Tab is GND Tab is GND ELECTRICAL SPECIFICATIONS ( Under Operating Conditions) Parameter SYM Reference Voltage VFB Output Voltage VOUT Line Regulation VLINE Load Regulation VLOAD Dropout Voltage (VIN-VOUT) VDROP Current Limit Minimum Load Current Thermal Rejection Ripple Rejection Temperature Stability ILIM TEST CONDITION TJ=25C,VIN-VOUT=1.5V, IO=10mA TYP MAX UNITS 1.176 1.200 1.224 V MIN APE8912 IOUT=10mA, TJ=25C 1.176 1.200 1.224 V APE8913 3VVIN6V 1.294 1.320 1.346 V TJ=25C , VOUT+1.5V<VIN<6V, IO=10mA, Vadj=10mA<IO<1A, (Note1,2) TJ=25C , VIN=3.3V, IOUT=1A, VOUT=1%VOUT APE8912/3 VIN=3.3V - - 0.2 % - - 1 % - 1.4 1.5 V 1.1 - - A 0C TJ125C - 3 5 mA TA=25C, 30ms pulse - 0.17 0.25 C - 60 70 db - 0.5 - % f=120Hz, COUT=25uF Tantalum, IOUT=1A VIN=VOUT+3V IO=10mA Note1. See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Note2. Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. Note3. Quiescent current is defined as the minimum output current required in maintaining regulation. 2 Advanced Power Electronics Corp. APE8912/APE8913 PIN DESCRIPTIONS PIN SYMBOL PIN DESCRIPITON The input pin of the regulator. A minimum of 1uF connected from this pin to ground to insure that the input voltage does not VIN sag below the minimum dropout voltage during the load transient response. This pin must always be 1.5V higher than VOUT in order for the device to regulate properly. GND Ground The output of the regulator. A minimum of 1uF capacitor VOUT (10m < ESR < 1) muse be connected from this pin to to ground to insure stability. BLOCK DIAGRAM 3 Advanced Power Electronics Corp. APE8912/APE8913 Typical Performance Characteristics 0.20 2. 0 Output Voltage Deviation (%) 1. 8 1. 6 Dropout Voltage (V) 1. 4 1. 2 0 I load=800mA -0.20 Tj = 25 oC 1. 0 -0.40 0. 8 Tj = 125 oC 0. 6 -0.80 0. 4 0. 2 0 0 250 750 500 -1 1000 -25 Output Current (mA) Dropout Voltage vs Output Current 0 25 50 Temperature (oC) 75 100 125 Load Regulation vs Temperature 2 1 Output Voltage Deviation (%) Output Voltage Change (%) 1.5 1 0. 5 0 -0.5 -1 -1.5 -2 -50 -25 0 25 50 Temperature (oC) 75 100 125 0.8 0.6 0.4 0.2 0 150 2 4 Cin=1uF Cout=10uF Tantalum 6.5 5.5 40 20 0 -20 -40 0 20 40 60 80 100 120 140 160 180 200 TIME (us) Line Transient Response 8 10 12 Line Regulation Load Current (A) Output Voltage Deviation (mV) Output Voltage Deviation (mV) Input Voltage (V) 7.5 6 Input Voltage (V) Percent Change in Output Voltage vs Temperature 30 C in = 1uF C out = 10 uF Tantalum Preload = 100mA 20 10 0 -10 -20 2 1 0 -1 0 10 20 30 40 50 TIME (us) 60 70 80 90 100 Load Transient Response 4 ADVANCED POWER ELECTRONICS CORP. Package Outline : SOT-223 C Millimeters A SYMBOLS MIN NOM MAX A B C 6.70 7.00 7.30 --- 2.3 --- 2.90 3.00 3.10 D 0.60 0.70 0.80 G 0.25 0.30 0.35 E 6.30 6.50 6.70 F 1.40 1.60 1.80 K 0.02 0.06 0.10 D B G E F K 1.All Dimension Are In Millimeters. 2.Dimension Does Not Include Mold Protrusions. Part Marking Information & Packing : SOT-223 Part Number 891XK YWWSSS Output Voltage 2 : 1.2V 3 : 1.32V Package Code K : SOT-223 ; KR : R-type SOT-223 Date Code (YWWSSS) YLast Digit Of The Year WWWeek SSSSequence 5 ADVANCED POWER ELECTRONICS CORP. Package Outline : TO-252 D D1 E2 MIN NOM MAX A2 1.80 2.30 2.80 A3 0.40 0.50 0.60 B1 0.40 0.70 1.00 D 6.00 6.50 7.00 D1 4.80 5.35 5.90 E3 3.50 4.00 4.50 E3 E1 B1 F1 e Millimeters SYMBOLS F 2.20 2.63 3.05 F1 0.5 0.85 1.20 E1 5.10 5.70 6.30 E2 0.50 1.10 1.80 e -- 2.30 -- C 0.35 0.50 0.65 F e 1.All Dimensions Are in Millimeters. 2.Dimension Does Not Include Mold Protrusions. R : 0.127~0.381 A2 A3 (0.1mm C Part Marking Information & Packing : TO-252 Part Number Package Code 891XH LOGO YWWSSS Output Voltage 2 : 1.2V 3 : 1.32V Date Code (YWWSSS) YLast Digit Of The Year WWWeek SSSSequence 6 ADVANCED POWER ELECTRONICS CORP. Package Outline & Packing : SOT-89 C J D B 2 1 Millimeters SYMBOLS MIN NOM MAX A 4.40 - 4.60 B 4.05 - 4.25 C 1.40 - 1.75 E 2.40 - 2.60 F 0.89 - 1.20 I 0.35 - 0.55 H ---- 1.50 ---- G ---- 3.00 ---- J 1.40 - 1.60 K 0.35 - 0.43 E 3 F I H K G 1.All Dimensions Are in Millimeters. A 2.Dimension Does Not Include Mold Protrusions. Part Marking Information : SOT-89 Part Number Output Voltage 2 : 1.2V 3 : 1.32V 891XX XXXG YWWS Type --- Blank : SOT-89 R : R-type SOT-89 Date Code (YWWS) Y:Year WWWeek SSequence 7