Varicon(R) Series 7038 - 0.100" Staggered Dual Row FEATURES * Varilok(R) contacts are insertable and removable by user * Crimp, solderless wrap, tapered tab, and wire hole terminations available * All crimping, insertion, and extraction equipment available (see page 26) * Guide sockets facilitate mating, ensure correct alignment * Open-ended card slot; no p.c. card notching necessary * Mates with Series 7023 Plug TECHNICAL SPECIFICATIONS Current Rating: 8 amperes Contact Resistance: 6 milliohms, maximum Contact Material and Plating: Phosphor Bronze Gold, 10 microinches minimum, over nickel, 50 to 100 microinches Insulator Material: Diallyl phthalate, glass-filled, flame resistant, per MIL-M-14F, Type SDGF. Dielectric Withstanding Voltage: Sea Level: 1800 Volts rms 3.4" Hg: 675 Volts rms Insertion/Withdrawal Force: 2 to 16 ounces per contact Insulation Resistance: 5,000 megohms, minimum Operating Temperature: -40C to +120C ORDERING CODE 00 7038 023 000 001 Number of Contacts 017, 023, 029, 035, 041 Contact Code See table. Variation Code 001 = 1/16" Thick Card 002 = 3/32" Thick Card 110 = 1/16" Thick Card 50 mil Gold 111 = 3/32" Thick Card 50 mil Gold 217 = 60 8017 05 13 Wire Hole 218 = 60 8017 06 13 Solderless Wrap Tail - .025" x .050" x .567" 750 = 60 8017 06 23 Solderless Wrap Tail - .025" x .050" x .760" 296 = 60 8017 06 33 Solderless Wrap Tail - .025" x .025" x .580" 504 = 60 8017 06 63 Solderless Wrap Tail - .025" x .025" x .170" *000 = 60 8017 03 13 Wire Crimp Tail (Contacts Loose) 18-26 AWG *000 = 60 8017 03 23 Wire Crimp Tail (Contacts on a Reel) 18-26 AWG *Order separately by part number, refer to page 25 12 Varicon(R) Series 7038 - 0.100" Staggered Dual Row DIMENSIONS: Number of Contacts 17 23 29 35 41 A 1.900 (0.075) 2.500 (0.099) 3.100 (0.122) 3.700 (0.146) 4.300 (0.169) millimeters (inches) B 2.300 (0.091) 2.900 (0.114) 3.500 (0.138) 4.100 (0.161) 4.700 (0.185) C Max. 2.570 (0.101) 3.170 (0.125) 3.770 (0.148) 4.370 (0.172) 4.970 (0.196) D 1.890 (0.075) 2.490 (0.098) 3.090 (0.121) 3.690 (0.145) 4.290 (0.169) E 1/16" Card .074 (0.003) .074 (0.003) .074 (0.003) .074 (0.003) .074 (0.003) 3/32" Card .105 (0.004) .105 (0.004) .105 (0.004) .105 (0.004) .105 (0.004) F G J 17/32" 17/32" 17/32" 17/32" 17/32" .571 (0.022) .571 (0.022) .571 (0.022) .571 (0.022) .571 (0.022) 1.850 (0.073) 2.450 (0.096) 3.050 (0.120) 3.650 (0.144) 4.250 (0.167) MOUNTING LAYOUT 13