THE ORIGINAL MEDICAL PUSH-PULL CONNECTOR REDEL 1P elbow socket for printed circuit Designed for the medical sector, this connector socket is intended for printed circuit board. Benefits * lightweight * EtO and gamma sterilisable * wide choice of colours for easy identification (grey, blue, yellow, black, red, green and white) * PCB vertical mount Feature * available in 2, 4, 5, 6, 7, 8, 9 and 10 contacts * outershell in grey PSU * bottom plate in PEEK * golden contacts (R) (R) PXG Elbow socket, key (G) or keys (A, B and C), with two nuts, for printed circuit Part Number 6.9 max. 4 M14x1 15.9 S17 2 4 5 6 7 8 9 10 PXG.M0.2GG.NG PXG.M0.4GG.NG PXG.M0.5GG.NG PXG.M0.6GG.NG PXG.M0.7GG.NG PXG.M0.8GG.NG PXG.M0.9GG.NG PXG.M1.0GG.NG 14.8 30.2 Number of contacts Note: The insulator is made of PSU. 4 3 19.2 14.5 M14x1 14.8 6.9 maxi S12.5 18.5 Note: All dimensions are in millimeters Reference Number of contacts Contact o (mm) Solder bucket o (mm) Crimp bucket o (mm) Test voltage (kV rms) Contact-contact Air clearance min (mm) Creepage dist. min (mm) Rated current (A) Insert configuration M0.2 M0.4 M0.5 M0.6 M0.7 M0.8 M0.9 M1.0 2 4 5 6 7 8 9 10 1.3 0.9 0.9 0.7 0.7 0.7 0.5 0.5 1.10 0.85 0.85 0.60 0.60 0.60 0.45 0.45 1.4 1.1 1.1 0.8 0.8 0.8 - 1.20 1.20 1.05 1.05 1.05 1.05 0.85 0.85 1.30 1.20 0.80 0.85 0.85 0.60 0.60 0.45 10 8 7 6 5 5 3 3 LEMO HEADQUARTERS Ch. des Champs-Courbes 28 P.O. Box 194, CH-1024 Ecublens Tel: (+41 21) 695 16 00 Fax: (+41 21) 695 16 02 info@lemo.com www.lemo.com (R) (R) May 08