okpac S/MON/1K00700/B/01/03/2005 page 1 / 4F/GB Cosses / Terminals 1LK00700 Raccordement de puissance Power connections Directement avec fils avec ou sans embouts/ Direct connection with wires with or without ferrules Avec adaptation/ With special adapters Avec cosses/ With tips (ring terminals) M5 okpac (W max = 12,6mm) Voir fiche technique du relais /See product data sheet KIT adaptation fort courant : 1LK00700 Special kit for high current: 1LK00700 Sections des conducteurs en cuivre en fonction des courants (IEC/EN60947-1) Copper conductor size according to current ( IEC/EN60947-1) Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s okpac Raccordement de puissance Power connections S/MON/1K00700/B/01/03/2005 page 2 / 4F/GB 1LK00700 KIT adaptation fort courant : 1LK00700 - Pour des sections < 16mm2 se reporter a la fiche technique du produit. - Pour des sections superieures, vous pouvez utiliser le KIT 1LK00700 ou alors les cosses etroites (page 4). - Ce kit 1LK00700 adapte a la gamme okpac a ete teste avec un relais SO869xxx jusqu'a 150A et homologue a 125A par le laboratoire UL. Special kit for high current: 1LK00700 - For wires < 16mm2 (AWG6) consult product data-sheet. - For wires > 25mm2 (AWG4) you can use 1LK00700 kit or suitable tips (see page 4) - This kit 1LK00700 developed for okpac range has been tested with SO869xxx upto 150A and UL approved at 125A by UL laboratory Relais okpac avec adaptation 1LK00700/ okpac SSR with special adapter 1LK00700 KIT adaptation fort courant / Special kit for high current: 1 1LK00700 1LK00700 3 1 : 2 sorties d'adaptation 4 2 power connections (1L871000) 2 : 2 vis TH M 8 x 20 mm / 2 1L871000 2 screws M8 x 20mm pour M8 / For M8 (1L148200) 1 1L871000 3 : 4 rondelles contacts 8 x 18 4 contact washers 8 x 18 (1L348000) 4 : 2 ecrous HM8 / 2 nuts M8 (1L468000) Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s okpac S/MON/1K00700/a/04/10/2004 page 3 / 4F/GB Cosses plage etroite <12,6mm COPPER LUGS WITH CONTAINED PALM Reference celduc celduc reference on request on request 1L592500 1L593500 1L595000 on request Avec les cosses forte puissance > 35mm2, les volets doivent etre supprimes ( protection IP00) With high power tabs > 35mm2, flaps must be removed ==> IP00 protection Outillage de sertissage sur demande HYDRAULIC CRIMPING TOOL on request celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 okpac S/MON/1K00700/a/04/10/2004 page 4 / 4F/GB Cosses Standards Standard Ring Terminals Preferentiel Recommended Avec 1LK00700 With 1LK00700 Preferentiel Recommended celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19