ECONOLINE
DC/DC-Converter
with 3 year Warranty
EN-60950-1 Certified
IEC/EN-60601-1 Certified*
CSA/UL-60950-1 Certified*
* +15/-9 Version excluded
Selection Guide
Part Input Output Output Efficiency Max
Number Voltage Voltage Current Capacitive
SIP 7 (VDC) (VDC) (mA) (%) Load(1)
RP-xx3.3S* 5, 9, 12, 15, 24 3.3 303 70 2200µF
RP-xx05S* 5, 9, 12, 15, 24 5 200 70-72 1000µF
RP-xx09S* 5, 9, 12, 15, 24 9 111 75 1000µF
RP-xx12S* 5, 9, 12, 15, 24 12 84 75-78 470µF
RP-xx15S* 5, 9, 12, 15, 24 15 66 80 470µF
RP-xx24S* 5, 9, 12, 15, 24 24 42 80 220µF
RP-xx3.3D* 5, 9, 12, 15, 24 ±3.3 ±152 70 ±1000µF
RP-xx05D* 5, 9, 12, 15, 24 ±5 ±100 74-76 ±470µF
RP-xx09D* 5, 9, 12, 15, 24 ±9 ±56 75 ±470µF
RP-xx12D* 5, 9, 12, 15, 24 ±12 ±42 79-82 ±220µF
RP-xx15D* 5, 9, 12, 15, 24 ±15 ±33 80-82 ±220µF
RP-xx24D* 5, 9, 12, 15, 24 ±24 ±21 80 ±100µF
RP-xx1509D 5, 12, 24 +15/-9 ±42 70-85 ±220µF
xx = Input Voltage. Other input and output voltage combinations available on request
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RP-0505S/P, RP-0505D/P
* add Suffix “/X2” for single output with alternative pinning e.g. RP-0505S/X2, RP-0505S/P/X2
Output Power (%)
100
60
20
40
100
500-40 85 150
Operating Temperature °C
0
80
Safe Operating Area
30
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range ±10%
Output Voltage Accuracy ±5%
Line Voltage Regulation 1.2%/1% of Vin typ.
Load Voltage Regulation 3.3V output types 20% max.
(10% to 100% full load) 5V output type 15% max.
9V, 12V, 15V, 24V output types, RP-xx1509D 10% max.
Output Ripple and Noise (20MHz limited) 100mVp-p max.
Operating Frequency 50kHz min. / 100kHz typ. / 120kHz max.
RP-xx1509D 50kHz min / 94kHz typ.
Efficiency at Full Load 70% min. / 80% typ.
Minimum Load = 0% Specifications valid for 10% minimum load only.
Isolation Voltage (tested for 1 second) 5200VDC
(rated for 1 minute**) 2600VAC / 60Hz
Isolation Capacitance 4pF min. / 10pF max.
Isolation Resistance 20 GWmin.
Short Circuit Protection 1 Second
P-Suffix Continuous
Operating Temperature Range (free air convection, without derating) -40°C to +85°C (see Graph)
continued on next page
1 Watt
SIP 7 Single &
Dual Output
Derating-Graph
(Ambient Temperature)
Pot-Core Transformer - separated windings
High 5.2kVDC Isolation in compact size
Optional Continuous Short Circuit Protected
Pin Compatible with RH and RK Series
Approved for Medical and IGBT Applications
UL and EN Certified
Efficiency to 82 %
Features
Unregulated
Converters
Description The RP series has very high isolation of 5.2 kVDC in a compact size. The converters are
EN-60601-1 certified, making them suitable for medical as well as IGBT driver applications.
The /X2 version has rearranged pins to permit an input output seperation of more than 9mm.
RP
RP
RoHS
2011/65/EU
6/6 E-358085
**Any data referred to in this datasheet are of indicative nature and
based on our practical experience only. For further details, please
refer to our Application Notes.
REV: 3/2017 www.recom-power.comE-66
www.recom-power.com/eval-ref-boards
Storage Temperature Range -55°C to +125°C
Relative Humidity 95% RH
Package Weight 2.4g
Packing Quantity 25 pcs per Tube
MTBF (+25°C) using MIL-HDBK 217F 928 x 103 hours
(+85°C) using MIL-HDBK 217F 150 x 103 hours
Certifications
CSA General Safety Report: E358085 CSA C22.2 No. 60950-1-03
UL General Safety Report: E358085 UL 60950-1 2nd Ed.
EN General Safety Report: SPCLVD1109103 EN60950-1:2006 + A12:2011
EN Medical safety Report: SPCMDD1205098-4 IEC/EN60601-1:2006, 3rd Edition
Typical Characteristics
RP
Series
ECONOLINE
DC/DC-Converter
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60% 80%
20%
20
60
80
Total Output current (%)
1205
0505
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60% 80%
20%
20
60
80
Total Output current (%)
1212
0512
Deviation / Load
-10.000
40%0% 100%
Deviation from Nominal (%)
60% 80%
20%
-5.000
Total Output current (%)
0505
0.000
5.000
10.000
15.000
20.000
25.000
1205
Deviation / Load
-10.000
40%0% 100%
Deviation from Nominal (%)
60% 80%
20%
-5.000
Total Output current (%)
0512
0.000
5.000
10.000
15.000
20.000
25.000
1212
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60% 80%
20%
20
60
80
Total Output current (%)
1205
0505
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60% 80%
20%
20
60
80
Total Output current (%)
1212
0512
RP-xx05S RP-xx12S
RP-xx05D RP-xx12D
RP
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
}
Detailed Information see
Application Notes chapter "MTBF"
Deviation / Load
-10.000
40%0% 100%
Deviation from Nominal (%)
60% 80%
20%
-5.000
Total Output current (%)
0515
0.000
5.000
10.000
15.000
20.000
25.000
1215
RP-xx15S
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60% 80%
20%
20
60
80
Total Output current (%)
1215
0515
RP-xx15D
continued on next page
Notes
Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter.
REV: 3/2017 E-67www.recom-power.com
0.51 typ.
2.54
1.00ø+0.15/0
2.54 Top View /X2 Version
Bottom View /X2
2.54 Top View Standard Version
Bottom View
2.54
7.05
RECOM
RP-xxxxS
****
12 57
0.51 typ.
4.10
10.20
19.65
1.27 0.25
9.65
pin clearance
2.0
RECOM
RP-xxxxD
****
Single Output
RECOM
RP-xxxxD
****
12 57
6
Dual Output
RECOM
RP-xxxxS/X2
****
12 7
6
Single Output/X2
19.65
1.27 0.25
7.11
pin clearance
2.0
RECOM
RP-xx1509D
****
12 57
6
Dual Output
RP
Package Style and Pinning (mm)
RP
Series
ECONOLINE
DC/DC-Converter
7 PIN SIP Package
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin Connections
Pin # Single Dual /X2
1 +Vin +Vin +Vin
2 –Vin –Vin -Vin
5 –Vout –Vout No Pin
6 No Pin Com -Vout
7 +Vout +Vout +Vout
Recommended Footprint Details
Isolated
DC/DC
Converter
IGBT
Driver IGBT
Rg
+Vout
-Vout
Control Signal
-Vin
C1
C2
C3
+
+
+
1
2
7
6
5
IGBT Application
Circuit
Application
Deviation / Load
-10.000
40%0% 100%
Deviation from Nominal (%)
60% 80%
20%
-5.000
Total Output current (%)
0505
0.000
5.000
10.000
15.000
20.000
25.000
1205
Deviation / Load
-10.000
40%0% 100%
Deviation from Nominal (%)
60% 80%
20%
-5.000
Total Output current (%)
0512
0.000
5.000
10.000
15.000
20.000
25.000
1212
Deviation / Load
-10.000
40%0% 100%
Deviation from Nominal (%)
60% 80%
20%
-5.000
Total Output current (%)
0515
0.000
5.000
10.000
15.000
20.000
25.000
1215
RP-xx05D RP-xx12D RP-xx15D
Typical Characteristics
The product information and specifications may be subject to changes even without prior written notice. The product has been designed for various applications; its suitability lies in the responsibility of each customer.
The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or
cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the
unauthorized use of RECOM products in such safety-critical applications.
REV: 3/2017 www.recom-power.comE-68