To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET Solid State Relay OCMOS FET PS7160-2A,PS7160L-2A 8-PIN DIP, 600 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET -NEPOC Series- DESCRIPTION The PS7160-2A and PS7160L-2A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7160L-2A has a surface mount type lead. FEATURES * 2 channel type (1 a + 1 a output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (8-pin DIP) * Low offset voltage * Ordering number of taping product: PS7160L-2A-E3, E4: 1 000 pcs/reel <R> * Pb-Free product * Safety standards * UL approved: File No. E72422 * BSI approved: No. 8245/8246 * CSA approved: No. CA 101391 APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10290EJ02V0DS (2nd edition) Date Published July 2006 NS CP(K) Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 1996, 2006 PS7160-2A,PS7160L-2A PACKAGE DIMENSIONS (in millimeters) PS7160-2A 9.250.5 TOP VIEW 8 7 6 5 1 2 3 4 1. 2. 3. 4. 5. 6. 7. 8. LED Anode LED Cathode LED Anode LED Cathode MOS FET MOS FET MOS FET MOS FET 1. 2. 3. 4. 5. 6. 7. 8. LED Anode LED Cathode LED Anode LED Cathode MOS FET MOS FET MOS FET MOS FET 7.62 3.30.3 3.50.3 4.150.3 6.50.5 0 to 15 0.50.1 1.340.1 0.25 M 2.54 PS7160L-2A 9.250.5 TOP VIEW 8 7 6 5 1 2 3 4 3.50.3 0.10+0.10 -0.05 6.50.5 1.340.1 0.25 M 2 0.90.25 2.54 9.600.4 Data Sheet PN10290EJ02V0DS PS7160-2A,PS7160L-2A <R> MARKING EXAMPLE No. 1 pin Mark PS7160-2A NL601 Country Assembled Type Number Assembly Lot N L 6 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code Data Sheet PN10290EJ02V0DS 3 PS7160-2A,PS7160L-2A <R> ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number Specification PS7160-2A PS7160-2A-A Pb-Free PS7160L-2A PS7160L-2A-A PS7160L-2A-E3 PS7160L-2A-E3-A PS7160L-2A-E4 PS7160L-2A-E4-A Magazine case 50 pcs Standard products PS7160-2A (UL, BSI, CSA Embossed Tape 1 000 pcs/reel approved) *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA/ch Reverse Voltage VR 5.0 V PD 50 mW/ch IFP 1 A/ch Break Down Voltage VL 600 V Continuous Load IL 90 (120) mA/ch ILP 250 (300) mA/ch PD 375 mW/ch BV 1 500 Vr.m.s. Total Power Dissipation PT 850 mW Operating Ambient Temperature TA -40 to +85 C Storage Temperature Tstg -40 to +100 C Diode Power Dissipation Peak Forward Current MOS FET Current *1 *2 Pulse Load Current *2, 3 (AC/DC Connection) Power Dissipation Isolation Voltage *4 *1 PW = 100 s, Duty Cycle = 1% *2 Conditions: IF 5 mA. Load current ( ) value is. *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output Pins 1-4 shorted together, 5-8 shorted together. RECOMMENDED OPERATING CONDITIONS (TA = 25C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V 4 Data Sheet PN10290EJ02V0DS *1 PS7160-2A,PS7160L-2A ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode MOS FET Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V 5.0 A 1.0 A Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage ILoff VD = 600 V 0.03 Output Capacitance Cout VD = 0 V, f = 1 MHz 110 LED On-state Current IFon IL = 90 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA Current Coupled pF/ch 2.0 mA 42 50 Ron2 IF = 10 mA, IL = 90 mA, t 10 ms 33 50 Turn-on Time *1, 2 ton IF = 10 mA, VO = 5 V, RL = 500 , 0.8 1.5 Turn-off Time *1, 2 toff PW 10 ms 0.06 0.2 Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 ms 9 1.1 pF/ch *1 Test Circuit for Switching Time IF Pulse Input VL 50 % Input 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % ton <R> toff *2 The turn-on time and turn-off time are specified as input-pulse width 10 ms. Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. Data Sheet PN10290EJ02V0DS 5 PS7160-2A,PS7160L-2A TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 150 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 -25 0 25 7585 50 100 75 50 25 0 -25 100 0 25 Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Output Capacitance Cout (pF) 1.4 f = 1 MHz 1.2 1.0 0 25 50 75 200 150 100 50 0 100 20 40 60 80 100 120 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 10-3 150 IF = 10 mA 10 -4 100 TA = 85 C Load Current IL (mA) Off-state Leakage Current ILoff (A) 100 250 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 0.8 -25 10-5 10-6 10 -7 25 C 50 -4.0 10-8 10-9 0 -2.0 0 -50 -100 100 200 300 400 500 600 Applied Voltage VD (V) -150 Load Voltage VL (V) Remark The graphs indicate nominal characteristics. 6 7585 50 Ambient Temperature TA (C) 1.6 Forward Voltage VF (V) 125 Data Sheet PN10290EJ02V0DS 2.0 4.0 PS7160-2A,PS7160L-2A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBTION 30 Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 -25 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 Number (pcs) Normalized On-state Resistance Ron 3.0 20 15 10 5 0 25 50 0 100 75 41 42 43 Ambient Temperature TA (C) On-state Resistance Ron () TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 8.0 0.5 VO = 5 V Turn-off Time toff (ms) Turn-on Time ton (ms) VO = 5 V 6.0 4.0 2.0 0 10 20 30 40 0.4 0.3 0.2 0.1 0 Forward Current IF (mA) 30 40 TURN-OFF TIME DISTRIBUTION TURN-ON TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 20 15 10 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) Number (pcs) 20 Forward Current IF (mA) 30 20 15 10 5 5 0 10 0.6 0.7 0.8 0.9 0 1.0 Turn-on Time ton (ms) 0.04 0.08 Turn-off Time toff (ms) Remark The graphs indicate nominal characteristics. Data Sheet PN10290EJ02V0DS 7 PS7160-2A,PS7160L-2A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 Ambient Temperature TA (C) 0 25 50 75 Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 8 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V Data Sheet PN10290EJ02V0DS 100 PS7160-2A,PS7160L-2A TAPING SPECIFICATIONS (in millimeters) 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS7160L-2A-E3 PS7160L-2A-E4 Outline and Dimensions (Reel) 2.00.5 R 1.0 21.00.8 1001.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel Data Sheet PN10290EJ02V0DS 15.9 to 19.4 Outer edge of flange 9 PS7160-2A,PS7160L-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) <R> (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10290EJ02V0DS PS7160-2A,PS7160L-2A <R> USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10290EJ02V0DS 11 PS7160-2A,PS7160L-2A * The information in this document is current as of July, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 12 Data Sheet PN10290EJ02V0DS PS7160-2A,PS7160L-2A Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@ncsd-hk.necel.com Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209 NEC Electronics (Europe) GmbH http://www.eu.necel.com/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Compound Semiconductor Devices Division NEC Electronics Corporation URL: http://www.ncsd.necel.com/ 0604