REV. Status] A. Electrical Specifications (Ta ISSUE 1 02/22/96 TOLERANCES (mm) = +25C) 1. Rated Voltage: 250V AC 50/60 Hz Rated Current: 0.5A AC Inductance (@ 1 KHz 1V): 47 mH MIN Insulation Resistance: DC 500V 100MQ MIN Between Winding to Winding Between Winding to Core HiPot Test: Winding to Winding AC 2.0 KV Winding to Core 6. DC Resistance: 2.25 0] MAX B. Marking; 8470 and date code UN MODEL NUMBER | CMF8470| C. Schematic Diagram: WDG1 WDG2 8470 D. Mechanical Specifications: 7 l~ 94.0(0.95) MAX "DATE CODE 31.0(1.22) MAX Y LI Y [ |o TS of | | ~ | | . | ~ 4.00.8(0.158+0.032) ae | ret 0.8(0.03) START START START /- WDG2 20+1(0.79+0.04) 10+40.4(0.394+0.016) < 44 02 4s 204 03 20 s 50+ 0.4 NL PREPARED BY: FINISH % FINISH WDG1 22+1(0.67+40.04) WGD2 K. Brennan ENGINEER: DWG CONTROL NO.| REV COIL PA4-11538 t Shiszaua ACAD\ MXFMR\A4115381.0WG | COMMON MODE CM F 8470 G CONTENTS OF THIS DRAWING. Ane| TAMURA CORPORATION OF AMERICA MODEL SPECIFICATION V. Casey PRIOR NOTICE $582 OSS B99 1270 FAR GOSBVOOAED | DIM: mm(in] SCL: 2/1 [sk 1 OF 1 APPROVED: V. Casey PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING.