712mm WIDE INVERTER TRANSFORMER FOR LCD BACKLIGHTING FEATURES: EASY SURFACE MOUNTING AND COMPATIBLE WITH IR REFLOW SOLDERING. * LOW PROFILE (5mm HEIGHT}. * HIGH VOLTAGE RESISTANT AND RELIABLE DUE TO MULTI-DIVISIBLE CONSTRUCTION. * GROUNDING TYPE CIRCUIT. APPLICATION : Ue "412.1" LOD PANNEL. Pitiein tee "973.3" LOD PANNEL. *14.1" LCD PANNEL. * PERSONAL DIGITAL ASSISTANTS. ELECTRICAL SPECIFICATION: LAMP OPERATIONAL COUPLING Meee ee VOLTAGE Trae FREQUENCY COEFFICIENT ST EAENyy siTo9183 SiT 10183 1711183 1600Vime aw 40K Hz~200KHz a6% 80% siTo9180 si7i1 180 TURNS INDUCTANCE MONO: [er | pe | oe 7. ee SEC SCHEMATICS:, 5 $iT09183 3 9 3 1800 30 SiT10183 10 40 3 1800 > Pe eee sirii193 1% "1 3 1800 S20mH SITO91a0 3 9 1800 rr SIT11180 14 ih 1800 == =6 PHYSICAL DIMENSION: (UNIT:mm) 10.0 4 0,20ENVIRONMENTAL PERFORMANCE ITEM TEST CONDITION 1 |Storage life Temperature : -20C ~+65C., Duration : 240 hours each. 2 | Static humidity Precondition at +25Cfor 60 minutes. After 96 hours at +40Ctemperature and 90% ralative humidity, allow to dry at room ambient for 4 hours. 3 |Temperature cycling One cycle shall consist of: (1) 30 minutes at tamperature -30C (2) 15 minutes maximum at room ambient. (3) 30 minutes at temperature +85C, (4) 15 minutes maximum at room ambient. Subject samples to 10 cycles. Test per applicable device specification alter a 4 hours stabilization at room ambient. 4 |Vibration test Vibration frequency : 10 ~ 50 ~ 10 Hz. All amplitude : 1.6mm minute. Direction : x,y,z (one hour each). |Solderability test Solder pot at 230C+5C, with kester 1544 solder flux.dip parts info solder pot containing \63/37 molten alloy for 5 seconds+1 second. Wetting must occur on a minimum of 90% of the tarminations. 6 |Operating |temperature(includin -10CTO +85C. |g transformer heat) 7 |Storage tamperature -20CTO +85C