10070D - KEYSIGHT TECHNOLOGIES

Agilent

Inﬁniium 8000 Series Oscilloscopes

Superior mixed-signal analysis and debug

Data Sheet

If you’re like most engineers, you never know what your next project will

demand from you. You need an oscilloscope that can adapt to a wide variety of

debug and test challenges.

We built in the powerful features you’d expect in any Infiniium scope. Then we

engineered the scope for superior mixed-signal debug and analysis, so it would

be a flexible tool in your arsenal.

There is no better way to experience the superiority of the Infiniium 8000 Series

scopes than to see it. Contact Agilent today to request an evaluation. Or visit:

www.agilent.com/find/8000

If you haven’t purchased an Agilent scope lately, why should you consider

one now?

The Infiniium 8000 Series offers bandwidths of 600 MHz and 1 GHz. Equipped with an XGA LCD display, scopes can be ordered as either

a DSO or MSO. With built-in GPIB and low 5U high profile, it's ideal for rackmount applications.

Infiniium 8000 Series oscilloscopes

Model Bandwidth Sample rate

4-ch/2-ch

Standard memory

4-ch/2-ch

Scope channel Logic channel

DSO8064A 600 MHz 2 GSa/s/4 GSa/s 4 Mpts/8 Mpts 4 –

MSO8064A 600 HHz 2 GSa/s/4 GSa/s 4 Mpts/8 Mpts 4 16

DSO8104A 1 GHz 2 GSa/s/4 GSa/s 4 Mpts/8 Mpts 4 –

MSO8104A 1 GHz 2 GSa/s/4 GSa/s 4 Mpts/8 Mpts 4 16

What makes the Infiniium 8000 Series flexible enough for a whole range of

test and debug challenges?

Great measurement capability

Oscilloscope:

The powerful features of our Infiniium Series oscilloscopes, coupled with good

scope specifications give you excellent signal representation on both DSO and

MSO models.

Logic analyzer:

16 digital channels let you see critical data values and timing relationships on

MSO models.

Wide range of debug and compliance application software

Need accurate answers to your measurement questions?

The Infiniium 8000 Series offers a wide range of application-specific software for

debug, analysis and compliance testing. Which application is right for you? Take

a look at the possibilities on pages 15 to 19.

Sized to fit your environment

Need to stack other instruments on top? Need to rackmount your scope?

The Infiniium 8000 Series retains a traditional form factor with just a 5U high

hight.

Oscilloscope Capabilities

Scope channels ensure superior viewing of signals under test. All models incorporate a powerful,

feature-packed Infiniium oscilloscope with responsive deep memory.

Up to 1 GHz bandwidth and 4 GSa/s high

sample rates guarantee you’ll see a good

representation of the analog

characteristics of signals you’re testing

Mask tests, histograms and a wide variety

of functions provide deep signal analysis.

Responsive deep memory

With standard 4 Mpts, and up to 128 Mpts of memory, you can capture long

time periods while retaining fast sample rates. Fast update rates mean your

scope stays responsive with deep memory on, ensuring precise representation of

analog signals.

Advanced triggering

Advanced triggers are essential when you are investigating suspected problems.

Infiniium offers a full range of advanced triggers to help you isolate and capture

the condition you need to characterize.

Drag and drop measurements

It’s simple: drag an icon from the measurement bar and drop it on the cycle you

want to measure. You can make up to five measurements on your waveforms, on

up to five different cycles. All of the measurements appear at the bottom of the

display with statistics and are color-coded to the channel you are measuring.

Oscilloscope Capabilities (continued)

MSO Capabilities

MSO models add 16 high-speed timing channels

Designing with Altera or Xilinx FPGAs? Use the FPGA dynamic

probe for rapid internal FPGA measurements. Using I²C, SPI,

or CAN? Use the digital channels to acquire and decode these

buses, preserving analog channels for other time-correlated

measurements.

Digital and mixed-signal trigger

Trigger on and display individual signals or buses. With precise time-correlation

between analog and digital signals, confidently trigger across any combination of

analog and digital signals simultaneously.

Industry’s only segmented memory for both analog and digital channels

Capture short bursts without consuming memory during periods when the trigger con-

dition is not met. Agilent is the only vendor that supports segmented memory capture

on both analog and digital channels.

Waveform and Listing Windows

View buses as waveforms or easily follow events in the listing window expandable

to the entire display. A blue tracking marker provides time-correlation between wave-

form and listing displays.

Use the timing channels to evaluate control signal relationships

and data buses up to 16 bits wide. Use symbols to more quickly

interpret waveforms.

Infiniium Features

DSO8064A/MSO8064A, DSO8104A/MSO8104A

Chart mode feature

Chart mode applies trend analysis techniques to see how the digital output

(ADC, counter, address lines, etc.) vary over time. This method is effective to

quickly find anomalies of the digital signals. You can also apply math operators

such as “FFT” to view the frequency domain of the analog values.

Serial, parallel and wideband

signal decode

Whether you are working on serial,

parallel or wideband signals, you can

use the 8000 Series to decode your

waveforms. When you are working on

parallel waveforms, you can even cus-

tomize the bus states to be displayed

on the decode table.

Powerful frequency and modulation analysis

The 8000 Series provides superior frequency domain analysis, RF-signal

demodulation and extensive standard-specific analysis coverage including

WiMAX™, WLAN, 3GPP, RFID and UWB with the optional 89601A Series VSA

software. With digital and wireless applications merging, you can use the 8000

Series one-box solution to validate the time and frequency domains.

Extensive application software suite

The 8000 Series provides wide application coverage for you to quickly and easily

verify your designs. Application packages include jitter, DDR, USB, Ethernet,

FlexRay, CAN, SPI, I2C, and FPGA.

Infiniium Features (continued)

DSO8064A/MSO8064A, DSO8104A/MSO8104A

Dialog boxes for easy setup

With Infiniium, you don’t need to navigate through annoying softkey menus.

Dialog boxes display all the choices you need for measurement setups, all in

one place. Help is available for each field, guiding you through each step.

Bus mode display

Bus mode display on MSOs allows quick and easy read-out of hexadecimal

representation of logic signals. Bus state mode display allows the bus readout

to be updated only upon the edge of the clock source you select. Available only

with Infiniium MSO models.

Simple zooming

Zooming with Infiniium’s graphical user interface is simple and convenient. Just

use the mouse to draw a box around the area of interest and click inside. Zoom

uses the full display so you get meaningful vertical as well as horizontal resolu-

tion gains. Use multiple zoom boxes to see deep inside your signal. Zooming

couldn’t be simpler or faster.

E-mail on trigger

Inﬁniium can automatically send an e-mail with a screen image of the display

when the scope triggers. You can have your Inﬁniium send an e-mail to you or

a message to your cell phone then control your scope from any Java™-enabled

Web browser with Inﬁniium’s Web-enabled feature.

Web-enabled control

For distributed teams, simply set up Inﬁniium on your LAN, and up to three

users can access it from any Java-enabled Web browser. No special software is

required. You can easily grab screen shots for a report, or troubleshoot designs

from a remote location.

Infiniium Features (continued)

DSO8064A/MSO8064A, DSO8104A/MSO8104A

AutoMask and mask test

Mask testing is simplified with AutoMask. Acquire a waveform, define tolerance

limits, and create a test envelope. Mask testing provides a pass/fail comparison

of an incoming signal to the test envelope. Easily test your design’s confor-

mance to industry standards with the communication mask test kit option.

Advanced triggering

Advanced triggers are essential when you are investigating known problems.

Infiniium offers a full range of advanced triggers to help you isolate and capture

the condition you need to characterize. Advanced trigger setups are simplified

by using intuitive dialog boxes with descriptive graphics.

Color-graded persistence with histograms

By providing seven levels of color grades for a visual representation of wave-

form distribution, color-graded persistence makes it easy to pick out signal

anomalies and see how often they occur. Histograms quantify both noise and

jitter in your target system.

QuickMeasure and statistics

Instantly make five common measurements on your signal, with easy-to-read

statistics, by pressing the QuickMeas+ button on the front of your Infiniium. The

measurements displayed can be easily customized.

Pseudo state

Convert digital timing waveforms into state waveforms, specifying the clock

edge when your data is valid. The MSO filters out all invalid states leaving

exclusively valid states in the waveform display.

Infiniium Features (continued)

DSO8064A/MSO8064A, DSO8104A/MSO8104A

High/low pass filter

This function applies a real-time digital filter to the source waveform that you

choose. This filtering feature enhances your ability to examine important signal

components by filtering out unwanted frequency components.

Connectivity and Probing

Connectivity

Industry compatibility

Export screen shots and waveforms in numerous industry-standard formats. In addi-

tion, the 8000 Series supports compatibility with the following

• IVI COM driver for application development environments such as Visual

Studio, Agilent VEE, NI LabView and MATLAB instrument control toolbox.

www.agilent.com/find/adn

• IntuiLink tool bars and data capture.www.agilent.com/find/intuilink

• LXI Class C including built-in Web control

Probing

The Infiniium 8000 Series oscilloscopes ship with four 10073C 10:1 divider passive

probes per scopeand probe accessory pouch.

With both 50 Ω and 1 MΩ inputs, Infiniium 8000 Series scopes support a wide range

of probes, including Agilent’s InfiniiMax Series probes.

Agilent offers an innovative family of probes that are engineered for signal access

and measurement accuracy. Whether you’re looking for simple passive probes, the

high bandwidth and low loading of an active probe, or specialty probes for current

or high voltage, we can meet your needs. Our innovative accessories allow reliable

connection to challenging components like small pitch devices, surface mount ICs,

and DDR BGA packages – even hands free!To see our entire award-winning portfolio

of passive, single-ended active, differential active, and current probesas well as an

oscilloscope compatibility chart, please view the Agilent Probes and Accessories

Selection Guide. publication number 5989-6162EN.

View Scope logic analyzer and

oscilloscope correlation

Use simple time-correlated measure-

ments between your scope and Agilent

16900, 16800, 1680, or 1690 Series

logic analyzer at no charge. Scope and

logic waveforms are integrated into a

single logic analyzer display for easy

viewing analysis – all with a simple

point-to-point LAN connection. You

can also cross trigger the instruments,

automatically de-skew the waveforms

and maintain marker tracking between

the instruments.

Get fast answers to your questions with

the comprehensive built-in information

system. The task-oriented setup guide

provides step-by-step instructions for

several measurement procedures.

QuickMeas+ key gives you any five

automated measurements with the push of

a button. You can also configure this key

to print/save screen images among other

functions.

Up to 128 Mpts of MegaZoom fast deep

memory sustains maximum sample rates

for long time captures.

Remote access via Web browser or

programming environment with GPIB

commands over LAN allows you to access

your oscilloscope from any networked PC.

E-mail-on-trigger allows you to leave your

oscilloscope, and when that intermittent

event is captured, Infiniium sends you

an e-mail that tells you exactly when it

happened with an attached screen image.

10/100/1000 BaseT LAN interface lets

you easily print to network printers, save

files to network drives, and control the

oscilloscope remotely.

Label waveforms and add comments

to Infiniium’s display for thorough

documentation before saving

screen images.

Context-sensitive right-click menus allow

quick access to oscilloscope settings,

controls, and display properties.

High-definition XGA color display with

256 levels of intensity uncovers subtle

signal details that most oscilloscopes

won’t show you…enabled by next-

generation MegaZoom technology.

Measurement markers can be easily

controlled via front-panel arrow keys

or dragging and dropping them with

the pointer.

Drag-and-drop measurements from the

measurement bar provide an intuitive way

to make a measurement on a particular

cycle of your waveform.

Touch screen display comes

standard for mouse-free

operation.

USB 2.0 port directly on front panel makes

it easy to save files to a USB mass storage

device.

MegaZoom technology enables you

to quickly pan and zoom through the

deepest waveforms for detailed analysis.

Mixed signal oscilloscope (MSO)

models seamlessly integrate four analog

scope channels with 16 digital channels

that provide full-width viewing and

triggering across many embedded signal

interactions.

AutoProbe interface completely

configures your oscilloscope and

provides power to various current and

active probes, including InfiniiMax active

probes.

Hands-free operation is available with

Infiniium’s VoiceControl option.

Open Windows XP Pro platform enables

you to install third-party applications

such as Excel, LabVIEW, and MATLAB to

perform custom analysis and processing,

all inside the oscilloscope.

XGA video monitor out provides the ability

to run third-party applications on a large

external display while the internal display

continues to display acquired waveforms.

Award-winning ease-of-use is made

possible by attention to details like

Infiniium’s analog-like front panel controls,

color-coded to correspond to displayed

waveforms.

Agilent’s Infiniium lineup includes 8000, 9000 and 90000A Series oscilloscopes. These share a number of advanced hard-

ware and software technology blocks. Use the following selection guide to determine which best matches your specific

needs.

Agilent Infiniium Portfolio

Lowest noise, highest

bandwidth

Widest range of applications.

Biggest display plus thin depth

Lowest cost, ideal for

rackmount

8000 Series 9000 Series 90000 Series

600 MHz bandwidth √

1 GHz bandwidth √ √

2.5 GHz and 4 GHz bandwidth √ √

> 4 GHz bandwidth √

Bandwidth upgradability √ √

50 Ω & 1 MΩ inputs √ √

MSO models √ √

Max 2-channel (4-channel) 4 GSa/s (2 GSa/s) 20 GSa/s (10 GSa/s) 40 GSa/s (40 GSa/s)

Built-in GPIB available √ √

Rackmount height 5U 8U 7U

Display size 8” 15” 12.1”

Footprint (H x W x D) 8.5 “ x 17.2” x 17.3”

22 cm x 44 cm x 44 cm

12.9 “ x 16.8” x 9”

33 cm x 43 cm x 23 cm

11.1 “ x 17” x 19.9”

28 cm x 43 cm x 51 cm

Infiniium Advanced Application Software

Xilinx and Altera FPGA dynamic probe for Infiniium MSO (N5397A and N5433A)

Agilent’s MSO FPGA dynamic probe provides rapid internal FPGA visibility

and quick instrument setup using an innovative core-assisted approach.

Measurement tasks that previously took hours can be done in a few mouse

clicks.

In a few seconds you can easily measure a different set of internal signals with-

out changing your FPGA design. The FPGA dynamic probe also imports signal

names from your FPGA design to the MSO digital channel labels.

Low-speed serial data analysis software (Option 007 or N5391A)

The N5391A low-speed serial data analysis software provides a fast and easy

way to debug inter-integrated circuit (I2C) and 2-, 3- or 4-wire serial peripheral

interface (SPI) serial communication buses. The low-speed SDA software

provides the ability to capture and automatically display decoded serial data

in numerical format synchronized with the analog or digital waveform, display

decoded packets in a sortable listing window view with automatic click and

zoom capability, and perform search functions for a particular packet with

navigator controls.

The Agilent 8000 Series Infiniium oscilloscope offers a broad portfolio of add-on applications that

enables you to customize your oscilloscope. These applications are available as add-on options at

your initial scope purchase or as user-installed options at a later time. For more information about

these options and to see if new applications have been added to our portfolio, please visit

www.agilent.com/find/8000scope-apps.

Power measurement application (U1882A)

Agilent's power application provides a full suite of power measurements that

run directly on the Inﬁniium 8000 Series oscilloscope. The power measurement

application offers seven modules to help you characterize your devices (power

device analysis, input line analysis, output analysis, turn on/off analysis, tran-

sient analysis, modulation analysis and deskew analysis) in addition to report

generation. Make more accurate power supply efﬁciency measurements by us-

ing a U1880A deskew ﬁxture to deskew your voltage and current probes.

Infiniium Advanced Application Software (continued)

High-speed serial data analysis software (Option 003 or N5384A)

The N5384A high-speed serial data analysis (SDA) software provides an effec-

tive way to validate signal integrity for designs employing high-speed serial

interfaces with embedded clocks. The high-speed SDA software, when used

with Infiniium oscilloscopes, allows you to:

• Recover embedded clocks with first-order PLL, second-order PLL, or constant

frequency algorithms

• Choose an external reference clock input

• Display the recovered clock synchronized with the analog waveform view of

the serial data stream

• Build real-time eye diagrams

• Unfold real-time eye diagrams to easily locate failures versus time

• Perform custom mask testing

• Make TIE jitter measurements relative to the recovered clock or external

reference clock

InfiniiScan event identification software (Option 009 or N5415A)

The Agilent InfiniiScan event identification software quickly and easily identifies

signal integrity issues. This innovative software scans through thousands of

acquired waveforms per second to help isolate anomalous signal behavior.

InfiniiScan can scan for multiple events simultaneously with resolution down to

70-ps events plus automated navigation to failure events. InfiniiScan software

finders consist of: measurement, zone qualify, generic serial, non-monotonic

edge and runt. InfiniiScan goes beyond the classic limitations of hardware trig-

gering and deep memory.

Automotive serial data analysis software (Option 008 or N5402A)

The N5402A automotive serial data analysis software allows engineers to

view both protocol layer information and physical layer signal characteristics for

CAN and FlexRay buses inside a single instrument, the Infiniium oscilloscope.

Numerical decode values are automatically displayed and synchronized below

the captured signal’s waveform. They can also be viewed in a sortable listing

window which allows automatic click and zoom capability to the signal of inter-

est as well as performs search functions for a particular packet. The option also

provides software clock recovery and real-time eye diagram measurements.

N5392A Ethernet electrical performance validation and compliance software

The Agilent N5392A Ethernet electrical performance validation and compliance

software performs a wide range of electrical tests to meet the Ethernet electrical

specifications for 1000Base-T, 100Base-TX and 10Base-T systems as docu-

mented in the IEEE 802.3-2005 and ANSIX3.263-1995 standards.

Features:

• Test setup wizard guides you through test selection, configuration, connec-

tion, execution and results reporting

• Fixtures available: N5395B or N5395C or N5395C Ethernet test fixtures and

N5396A jitter test cable

• Supports 1000Base-T disturbing signal measurements with the use of 33250A

arbitrary waveform generators

• Supports return loss measurements with most HP/Agilent vector network

analyzers

Infiniium Advanced Application Software (continued)

EZJIT jitter analysis software (Option 002 or E2681A)

The E2681A jitter analysis option provides the most commonly needed jitter

measurements, including cycle-cycle jitter, N-cycle jitter, period jitter, time inter-

val error, setup and hold time, measurement histograms, measurement trending

and jitter spectrum. EZJIT provides a setup wizard that guides you through the

setup of the jitter measurement, explains how each jitter measurement works,

and tells you when to use it.

Infiniium Advanced Application Software (continued)

Vector signal analysis software for Infiniium (89601A)

The 89601A vector signal analyzer (VSA) software, used with the Infiniium 8000

Series, enables flexible signal analysis and demodulation up to 1-GHz bandwidth

for troubleshooting wideband modulated signals in radar and communications

applications. The solution provides:

• Flexible demodulation for measuring constellation diagrams, carrier offset,

and frequency error for QPSK signals, 256-QAM signals and much more

• Display formats including spectrogram, phase vs. time, and frequency vs. time

for rapid insight into complex signal behavior

• Error vector magnitude measurements (with 89601A Option AYA)

• Markers to facilitate frequency, amplitude, offset, power, phase, other mea-

surements

• Time gating that allows you to select specific portion of signals for signal

analysis

• Variable frequency resolution

DDR1 compliance test application (U7233A)

The Agilent U7231A DDR1 compliance test application provides you with a fast

and easy way to characterize and evaluate the electrical and timing parameters

of your DDR1 design. The tests performed by U7231A are based on the JEDEC

JESD79E DDR SDRAM Specification.

Features:

• Setup wizard for quick setup and testing

• Automated measurement and analysis to save you time and effort

• Margin analysis to indicate how close your device comes to passing or failing

the test

• Automatic HTML report generation for easy documentation

USB 2.0 performance validation and compliance software (N5416A)

The Infiniium USB 2.0 electrical performance validation and compliance option

provides a fast and reliable way to verify USB electrical specification compliance

for USB 2.0 devices, hosts, and hubs. The Infiniium USB 2.0 test option executes

the official USB-IF MATLAB scripts with MATLAB’s runtime engine embedded

in the oscilloscope. Results are displayed in a flexible report format with margin

analysis. The Infiniium 8000 Series with bandwidths of 600-MHz and 1 GHz can

appropriately test USB 2.0 low- and full-speed buses. The E2646A SQiDD test

fixture is available for making the physical connection between the Infiniium

oscilloscope and the device under test.

My Infiniium integration package (Option 006 or E2699A)

The E2699A My Infiniium integration package option allows you to extend the

power of your Infiniium oscilloscope by letting you launch your application

directly from the oscilloscope’s front panel or graphical user interface. Any

program that can be run under Windows XP can be launched from the Infiniium

scope user interface or front panel, including applications such as Agilent VEE,

Microsoft Excel, or MATLAB.

Communication mask test kit (E2625A)

Take the frustration out of communications testing and prove your designs

conform to industry standards with the communication mask test kit option.

Infiniium’s familiar Windows interface makes it easy for you to access the

masks you need and configure your tests.

In addition, the communication mask test kit comes with a set of electrical com-

munication adapters to ensure convenient, reliable, and accurate connections to

your device under test. Includes more than 20 industry-standard ANSI T1.102,

ITU-T G.703, and IEEE 802.3 communication signal mask templates.

Infiniium user-defined function (Option 010 or N5430A)

The Agilent N5430A Infiniium user-defined function opens up new possibili-

ties for mathematical analysis features of Infiniium by creating a gateway to

MATLAB from MathWorks (www.mathworks.com/). You can now add your

favorite MATLAB .m scripts as “math function operators,” and use them just

like any other standard functions provided with the Infiniium. The scope passes

data to MATLAB and then displays the result back on the screen in real time.

Requires MATLAB software separately.

Features:

• Seamless gateway to powerful MATLAB analysis functionality

• Real-time analysis, real-time update

• Requires XML programming and .m script file

• Supports 2 control variables, and 2 sources

• Supports MATLAB version R14 SP1 and later

Infiniium Advanced Application Software (continued)

Infiniium Active Probing

Probing importance

If you are concerned about accurate reproduction of your signals as they

appear on your device under test, you need the best end-to-end measurement

system starting at the probe tip. To ensure that you achieve the full bandwidth

of your oscilloscope, you need to ensure you are using a probe that shows

you the details of the signal. For example, the 1 GHz models (DSO8104A and

MSO8104A) will need an active probe with the bandwidth of at least 1 GHz. The

1156A or the 1130A active probes are recommended to achieve the full system

bandwidth of your scope. In addition, a selection of probes that specifically

enhances or utilizes Infiniium 8000 Series are also listed.

For more complete information on Agilent probing solutions please see the

Oscilloscope Probes and Accessories Selection Guide (Agilent publication

number 5989-6162EN).

Recommended probes

Model Probe bandwidth System bandwidth

1156A 1.5 GHz active probe 1 GHz with MSO8104A and DSO8104A

600 MHz with MSO8064A and DSO8064A

1130A 1.5 GHz InfiniiMax probe amplifier (No probe heads included 1)1 GHz with MSO8104A and DSO8104A

600 MHz with MSO8064A and DSO8064

Other probe choices

Model Description

10070C 1:1, 1 MΩ passive probe 2

1165A 10:1, 10 MΩ 600-MHz passive probe

1147B 50 MHz, 15 A AC/DC current probe

N2780A 2 MHz/500 A AC/DC current probe 3

N2781A 10 MHz/150 A AC/DC current probe 3

N2782A 50 MHz/30 A AC/DC current probe 3

N2783A 100 MHz/30 A AC/DC current probe 3

1153A 200 MHz differential probe

E5396A Half-size (17 channel) soft touch connectorless logic probe for MSO models

N5450A InfiniiMax extreme temperature extension cable for temperature chamber testing

1. For a complete probing solution, also order a connectivity kit or individual probe head(s) (E2675A, E2668A, E2669A).

2. Fine-pitch and IC probing kits available (10072, 10075A).

3. Order N2779A 3-channel power supply for N2780A series current probe.

Infiniium Performance Characteristics

Vertical: scope channels DSO8064A, MSO8064A, DSO8104A, MSO8104A

Input channels DSO8064A/DSO8104A: 4 analog

MSO8064A/MSO8104A: 4 analog + 16 digital

Analog bandwidth at 50 Ω (–3 dB) 1DSO8064A/MSO8064A: 600 MHz

DSO8104A/MSO8104A: 1 GHz

Calculated rise time 2 at 50 Ω DSO8064A/MSO8064A: 583 ps

DSO8104A/MSO8104A: 350 ps

Input impedance 11 MΩ ± 1% (13 pF typical), 50 Ω ± 1.5%

Sensitivity 31 mV/div to 5 V/div (1 MΩ)

1 mV/div to 1 V/div (50 Ω)

Input coupling 1 MΩ: AC, DC; 50 Ω: DC

Hardware bandwidth limit 20 MHz

Vertical resolution 48 bits, ≥12 bits with averaging

Channel-to-channel isolation

(any two channels with equal V/div

settings)

DC to 50 MHz: 50 dB

> 50 MHz to 500 MHz: 40 dB

> 500 MHz to 1 GHz: 30 dB

DC gain accuracy 1, 3, 5 ± 1.25% of full scale at full resolution channel scale

Maximum input voltage 1

1 MΩ 150 V RMS or DC, CAT I

± 250 V (DC + AC) in AC coupling

50 Ω 5 Vrms, CAT I

Offset range Vertical sensitivity Available offset

1 MΩ 1 mV to < 10 mV/div ± 2 V

10 mV to < 20 mV/div ± 5 V

20 mV to < 100 mV/div ± 10 V

100 mV to < 1 V/div ± 20 V

1 V to 5 V/div ± 100 V

50 Ω 1 mV to < 5 mV/div ± 2 V

5 mV to < 200 mV/div ± 5 V

200 mV to 1 V/div ± 20 V

Offset accuracy 1, 3 ± (1.25% of channel offset +2% of full scale +1 mV)

Dynamic range ± 8 div from center screen (1 MΩ)

± 12 div from center screen (50 Ω)

DC voltage measurement accuracy 1, 3, 5

Dual cursor ± [(DC gain accuracy) + (resolution)]

Single cursor ± [(DC gain accuracy) + (offset accuracy) + (resolution/2)]

Example for single cursor accuracy for 70 mV signal, 10 mV/div, 0 offset:

Accuracy = ± [1.25% (80 mV) + (1.25% (0) + 2% (80 mV) + 1 mV ) + (0.4%/2) (80 mV)] =

± 3.8 mV

1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30 minute warm-up period and ±10 °C from

firmware calibration temperature.

2. Rise time figures are calculated from t r = 0.35/bandwidth.

3. Magnification is used below 5 mV/div range. Below 5 mV/div, full scale is defined as 40 mV. Full scale is defined as the major

attenuator setting above an intermediate setting. (Major settings 50 Ω: 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 1 MΩ: all

of the above plus 2 V).

4. Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.

5. The dc gain accuracy decreases 0.08% of full scale per degree C from the calibration temperature.

Infiniium Performance Characteristics (continued)

Vertical:

Analog noise floor DSO/MSO8064A DSO/MSO8104A

Volts/div Vrms

50 Ω

Vrms

1 MΩ

Vp-p

50 Ω

Vp-p

1 MΩ Vrms 50 Ω Vrms

1 MΩ

Vp-p

50 Ω

Vp-p

1 MΩ

Full bandwidth 5 mV 204.8 µV 219.8 µV 1.61 mV 1.65 mV 285.4 µV 283.8 µV 2.30 mV 2.22 mV

10 mV 228.3 µV 243.9 µV 1.67 mV 1.75 mV 315.5 µV 312.7 µV 2.41 mV 2.36 mV

20 mV 341.9 µV 351.8 µV 2.44 mV 2.48 mV 456.6 µV 454.9 µV 3.45 mV 3.42 mV

50 mV 957 µV 966.1 µV 6.86 mV 6.91 mV 1.26 mV 1.25 mV 9.51 mV 9.45 mV

100 mV 1.61 mV 1.64 mV 11.56 mV 11.7 mV 2.13 mV 2.13 mV 16.06 mV 16.13 mV

200 mV 3.39 mV 3.22 mV 24.3 mV 22.9 mV 4.47 mV 4.19 mV 33.85 mV 31.8 mV

500 mV 9.59 mV 9.87 mV 69.1 mV 70.6 mV 12.59 mV 11.38 mV 95 mV 86 mV

1 V 16.2 mV 16.03 mV 116.3 mV 114.6 mV 21.39 mV 21.1 mV 160.9 mV 158.7 mV

20 MHz hardware

bandwidth limit

5 mV 210 μV 219 μV 1.53 mV 1.69 mV 126.0 μV 144.1 μV 931 μV 1.06 mV

10 mV 222 μV 237 μV 1.65 mV 1.72 mV 206.0 μV 212.1 μV 1.55 mV 1.59 mV

20 mV 365 μV 371 μV 2.67 mV 2.71 mV 378.0 μV 379.4 μV 2.85 mV 2.85 mV

50 mV 891 μV 897 μV 6.56 mV 6.66 mV 1.084 mV 1.08 mV 8.18 mV 8.16 mV

100 mV 1.47 mV 1.48 mV 10.65 mV 10.8 mV 1.97 mV 1.97 mV 14.7 mV 14.7 mV

200 mV 3.62 mV 2.91 mV 26.4 mV 21.0 mV 3.75 mV 3.93 mV 28.2 mV 29.3 mV

500 mV 8.92 mV 8.19 mV 65.7 mV 59.9 mV 10.9 mV 9.45 mV 82.0 mV 70.8 mV

1 V 14.68 mV 14.9 mV 106.8 mV 108.2 mV 19.8 mV 19.06 mV 149.5 mV 142.0 mV

Vertical: Digital channels MSO8064A, MSO8104A

Number of channels 16 digital – labeled D15 to D0

Threshold groupings Pod 1: D7 to D0

Pod 2: D15 to D8

Threshold selections TTL, 5.0V CMOS, 3.3V CMOS, 2.5V CMOS, ECL, PECL, user defined

User-defined threshold range ± 8.00 V in 10 mV increments

Maximum input voltage ± 40 V peak CAT I

Threshold accuracy ± (100 mV + 3% of threshold setting)

Input dynamic range ± 10 V about threshold

Minimum input voltage swing 500 mV peak-to-peak

Input impedance 100 kΩ ± 2% (~ 8 pF) at probe tip

Channel-to-channel skew 2 ns typical, 3 ns maximum

Glitch detect ≥ 2.5 ns

Resolution 1 bit Resolution 1 bit

Infiniium Performance Characteristics (continued)

Horizontal DSO8064A, MSO8064A, DSO8104A, MSO8104A

DSO8064A/MSO8064A DSO8104A/MSO8104A

Main time base range 500 ps/div to 20 s/div 200 ps/div to 20 s/div

Horizontal position range 0 to ± 200 s

Delayed sweep range 1 ps/div to current main time base setting

Resolution 4 ps

Time scale accuracy 1±(15+2•(yearssincemanufacture))ppm

Delta-time measurement accuracy 1Values apply to period measurements of 0.5 Vpp sine waves with frequencies equal to

½ the oscilloscope bandwidth at 100 mV/div using ≥ 2 GSa/s and sinx/x interpolation

≥ 256 averages, absolute (ps peak) 4.0 2.0

≥ 256 averages, standard deviation (ps rms) 1.2 0.38

No averaging, absolute (ps peak) 30 27

No averaging, standard deviation 6.8 5.7

Channel-to-channel deskew range –100 μs to 100 μs

Modes Main, delayed, roll

Reference positions Left, center, right

Jitter measurement floor

Time interval error 7 ps rms 5 ps rms

Period jitter 10 ps rms 7 ps rms

N-cycle, cycle-cycle jitter 15 ps rms 11 ps rms

1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30 minute warm-up period and ± 10 °C from

firmware calibration temperature.

Infiniium Performance Characteristics (continued)

Acquisition: Scope channels DSO8064A, MSO8064A, DSO8104A, MSO8104A

Real time sample rate (max)

2 channels 4 GSa/s

Each channel 2 GSa/s

Equivalent time sample rate (max)

250 GSa/s

Memory depth 62 channels/4 channels

Standard 8 Mpts/4 Mpts

Option 080 16 Mpts/8 Mpts

Option 160 32 Mpts/16 Mpts

Option 320 64 Mpts/32 Mpts

Option 640 128 Mpts/64 Mpts

Sampling modes

Real time

Normal Successive single-shot acquisitions

Peak detect Captures and displays narrow pulses or glitches at all real time sample rates

High resolution Real-time boxcar averaging reduces random noise and increases resolution

Equivalent time Random repetitive sampling (higher time resolution at faster sweep speeds)

Segmented memory Captures bursting signals at maximum sample rate without consuming memory during

periods of inactivity. Selectable number of segments up to 32,768 depending on

memory option installed. Minimum inter-segment time (or the time between the end of

the previous acquisition and the beginning of the next acquisition) of 20 μs.

Averaging Selectable from 2 to 65,534

Filters (Sin[x])/x Interpolation Filter on/off selectable FIR digital filter. Digital signal processing adds points between

acquired data points to enhance measurement accuracy and waveform display quality.

BW = sample rate/4

Acquisition: Digital channels MSO8064A, MSO8104A

Maximum input frequency 250 MHz

Maximum real time sample rate 1 GSa/s

Memory depth per channel 32 M

Minimum width glitch detection 2.5 ns

6. Maximum 2-channel memory depth only available at maximum 2-channel sample rate. Maximum each channel memory depth

available at any selectable sample rate.

Infiniium Performance Characteristics (continued)

Trigger: Scope channels DSO8064A, MSO8064A, DSO8104A, MSO8104A

Sensitivity

Internal 7DC to 600 MHz: 0.6 div

600 MHz to 1 GHz: 1.5 div (50 Ω)

Auxiliary DC to 600 MHz: 300 mVp-p

Level range

Internal ± 8 div from center screen (1 MΩ)

± 8 div from center screen (50 Ω)

Auxiliary ± 5 V

Sweep modes

Auto, triggered, single

Trigger coupling

DC, AC, low frequency reject (50 kHz high pass filter), high frequency reject (50 kHz low

pass filter)

Trigger conditioning

Noise reject adds hysteresis to trigger circuitry decreasing sensitivity to noise

Trigger holdoff range

50 ns to 10 s

Trigger jitter

8 ps ± 0.05 ppm x |delay setting| rms

Trigger actions

Specify an action to occur, and the frequency of the action, when a trigger condition occurs.

Actions include: E-mail on trigger and QuickMeas + functions

Trigger modes

Edge Triggers on a specified slope and voltage level on any channel, auxiliary trigger or line input.

Glitch Triggers on glitches narrower than the other pulses in your waveform by specifying a width

less than your narrowest pulse and a polarity. Minimum glitch width is 500 ps (scope

channels) or 2.5 ns (digital channels). Glitch range settings: < 1.5 ns to < 10 s (scope

channels), < 5 ns to < 10 s (digital channels).

Line Triggers on the line voltage powering the oscilloscope.

Pattern Triggers when a specified logical combination of the channels is entered, exited, is present

or absent for a specified period of time or is within a specified time range. Each channel can

have a value of high (H), low (L) or don’t care (X).

State Pattern trigger clocked by the rising or falling edge, or both, of one channel.

Logic type: AND or NAND.

Delay by time The trigger is qualified by an edge. After a specified time delay between 5 ns to 10 s, a

rising or falling edge on any one selected input will generate the trigger.

Delay by events The trigger is qualified by an edge. After a specified delay between 1 to 16,000,000 rising or

falling edges on any one selected input will generate the trigger.

TV Trigger on one of the three standard television waveforms:

525 lines/60 Hz (NTSC) 625 lines/50 Hz (PAL), or define a custom waveform.

Violation triggers

Pulse width See trigger mode/glitch for performance characteristics. Greater than and less than

selections available.

Setup/hold Triggers on setup, hold or setup and hold violations in your circuit. Requires a clock and

data signal on any two input channels as trigger sources. High and low thresholds and

setup and/or hold time must then be specified.

Transition Transition Trigger on pulse rising or falling edges that do not cross two voltage levels in

greater than or less than the amount of time specified.

7. Valid for vertical ranges > 5 mV/div.

Infiniium Performance Characteristics (continued)

Software trigger (InfiniiScan event identification software (Option 009))

Trigger modes

Generic serial Software triggers on NRZ-encoded data up to 80-bit pattern. Supports multiple clock data

recovery methods including constant frequency, 1st order PLL, 2nd order PLL, explicit clock,

explicit 1st order PLL, 2nd order PLL (requires N5384A except for the constant frequency).

Measurements Software triggers on the results of the measurement values. For example, when the “pulse

width” measurement is turned on, InfiniiScan measurement software triggers on a glitch as

narrow as 250 ps.

Non-monotonic Software triggers on the non-monotonic edge. The non-monotonic edge is specified by

setting a hysteresis value.

Runt Software triggers on a pulse that crosses one threshold but fails to cross a second

threshold before crossing the first again.

Zone qualify Software triggers on the user-defined zones on screen. Zones can be specified as either

“must intersect” or “must not intersect.” Up to four zones can be defined.

Trigger: Digital channels MSO8064A, MSO8104A

Threshold range (user defined) ± 8.0 V in 10-mV increments

Threshold accuracy 1± (100 mV + 3% of threshold setting)

Predefined thresholds TTL=1.4 V, 5.0 V CMOS=2.5 V, 3.3 V CMOS=1.65 V, 2.5 V CMOS=1.25 V, ECL=–1.3 V,

PECL=3.7 V

1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from

firmware calibration temperature.

Infiniium Performance Characteristics (continued)

Measurements and math DSO8064A, MSO8064A, DSO8104A, MSO8104A

Waveform measurements

Voltage (scope channels only) Peak-to-peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot,

preshoot, upper, middle, lower, runt (with InfiniiScan)

Time (all channels) Period, frequency, positive width, negative width, duty cycle, delta time

Time (scope channels only) Rise time, fall time, Tmin, Tmax, channel-to-channel phase, setup time, hold time

Mixed (scope channels only) Area, slew rate

Frequency domain FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude

Eye pattern Eye height, eye width, jitter, crossing %, Q-factor, duty cycle distortion

Jitter clock (scope only) Cycle-cycle jitter, N-cycle jitter, cycle-cycle +width, cycle-cycle –width, cycle-cycle duty

cycle (all with EZJIT)

Jitter data (scope only) Time interval error (TIE), data rate, unit interval (all with EZJIT)

Measurement modes

Automatic measurements Measure menu access to all measurements, five measurements can be displayed

simultaneously with statistics

QuickMeas+ Front-panel button activates five pre-selected or five user-defined automatic

measurements

Drag and drop measurement toolbar Measurement toolbar with common measurement icons that can be dragged and dropped

onto a particular displayed waveform cycle

Statistics

Displays the mean, standard deviation, minimum, maximum range, and number of measurement values for the displayed automatic

measurements.

Histograms (scope channels only)

Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are defined using waveform

markers. Measurements included: mean, standard deviation, mode, peak-to-peak, median, total hits, peak (area of most hits), and

mean ± 1, 2, and 3 sigma.

Mask testing

Allows pass/fail testing to user-defined or Agilent-supplied waveform templates.

AutoMask

Allows user to create a mask template from a captured waveform and define tolerance range in time/voltage or percentage. Test

modes include test forever, test to specified time or event limit, and stop on failure. Communications mask test kit option provides a

set of ITU-T G.703, ANSI T1.102, and IEEE 802.3 industry-standard masks for compliance testing.

Marker modes

Manual markers, track waveform data, track measurements

Waveform math

Four functions f1-f4. Select from add, average, common mode, differentiate, divide, FFT magnitude, FFT phase, high pass filter,

integrate, invert, low-pass filter, magnify, min, max, multiply, smoothing, subtract, versus

FFT

Frequency range 8DC to 2 GHz (2 channels), DC to 1 GHz (each channel)

Frequency resolution Resolution = sample rate/memory depth

Best resolution at maximum sample rate 4 GSa/s/32 M = 125 Hz

Frequency accuracy (1/2 frequency resolution) + (5x10-5) (signal frequency)

Signal-to-noise ratio 980 dB at 1 Mpts memory depth

Window modes

Hanning, flattop, rectangular

8. FFT amplitude readings are affected by input amplifier roll-off; DSO8064A and MSO8064A: –3 dB at 600 MHz, with amplitude

decreasing as frequency increases above 600 MHz; DSO8104A and MSO8104A: –3 dB at 1 GHz, with amplitude decreasing as

frequency increases above 1 GHz.

9. Noise floor varies with memory depth and with averaging on or off.

Infiniium Performance Characteristics (continued)

Display

Display 8.4 inch color XGA TFT-LCD with touch screen

Intensity grayscale 256-level intensity-graded display

Resolution 1024 pixels horizontally x 768 pixels vertically

Annotation Up to 12 labels, with up to 100 characters each, can be inserted into the waveform area

Grids Can display 1, 2 or 4 waveform grids

Waveform styles Connected dots, dots, infinite persistence, color graded infinite persistence. Includes up to

256 levels of intensity-graded waveforms.

Waveform update rate

Real time mode (nominal) 2,000 waveforms/sec (memory depth: 64 kpts, sampling rate: 4 GS/s, time/div: 500 ps,

connect dots: on, sin(x)/x: on, color graded: off)

Computer system and peripherals, I/O ports

Computer system and peripherals

Operating system Windows XP Pro

CPU Intel® Celeron™ 3.2 GHz microprocessor

PC system memory 1 GB DDR2

Drives ≥ 40 GB internal hard drive (optional removable hard drive), external DVD-RW drive

(optional)

Peripherals Logitech optical USB mouse, compact keyboard and stylus supplied. All Infiniium models

support any Windows-compatible input device with a serial, PS/2 or USB interface.

File types

Waveforms Compressed internal format (*.wfm), comma separated values (*.csv), tab separated values

(*.tsv) and Y value files (*.txt)

Images BMP, PCX, TIFF, GIF or JPEG

I/O ports

LAN RJ-45 connector, supports 10Base-T, 100Base-T, and 1000Base-T. Enables Web-enabled

remote control, e-mail on trigger or demand, data/file transfers and network printing

GPIB IEEE 488.2, fully programmable

RS-232 (serial) COM1, printer and pointing device support

Parallel Centronics printer port

PS/2 Two ports. Supports PS/2 pointing and input devices.

USB 2.0 Hi-Speed One port on front panel plus four ports on rear panel. All USB 2.0 Hi-Speed compatible.

Allows connection of USB peripherals like storage devices and pointing devices while the

oscilloscope is on.

Dual-monitor video output 15 pin XGA, full color output of scope waveform display or dual monitor video output

(up to SXGA resolution with a dual monitor use)

Auxiliary output DC (± 2.4 V); square wave (~715 Hz and 456 MHz); trigger output (255 mV p-p into 50 Ω)

Trigger output 5 V 50 Ω back-terminated

LXI compliance

Functional Class C

Infiniium Performance Characteristics (continued)

General characteristics DSO8064A, MSO8064A, DSO8104A, MSO8104A

Temperature

Operating 0 °C to + 50 °C

Non-operating –40 °C to + 70 °C

Humidity

Operating Up to 95% relative humidity (non-condensing) at +40 °C

Non-operating Up to 90% relative humidity at +65 °C

Altitude

Operating Up to 4,600 meters (15,000 feet)

Non-operating Up to 15,300 meters (50,000 feet)

Vibration

Operating Random vibration 5-500 Hz, 10 minutes per axis, 0.3 g (rms)

Non-operating Random vibration 5-500 Hz, 10 minutes per axis, 2.41 g (rms); resonant search

5-500 Hz, swept sine, 1 octave/minute sweep rate, (0.75 g), 5 minute resonant dwell at

4 resonances per axis

Power

100 to 240 VAC, ± 10%, Cat II, 47 to 63 Hz; Max power dissipated: 440 W

Weight

Net: 13.9 kg (30.6 lbs.)

Shipping: 16.4 kg (36.1 lbs.)

Dimensions (excluding handle)

Height: 216 mm (8.5 in); Width: 437 mm (17.19 in); Depth: 440 mm (17.34 in)

Safety

Meets IEC1010-1 +A2, CSA certified to C22.2 No.1010.1, Self certified to UL 3111

Infiniium Ordering Information

8000 Series oscilloscopes

DSO8064A MSO8064A DSO8104A MSO8104A

Bandwidth 600 MHz 600 MHz 1 GHz 1 GHz

Input channels 4 analog 4 analog +

16 logic

4 analog 4 analog +

16 logic

Maximum sample

rate (2 channel)

4 GSa/s 4 GSa/s 4 GSa/s 4 GSa/s

Standard memory

(2 channel)

8 Mpts 8 Mpts 8 Mpts 8 Mpts

The above models include: optical USB mouse, condensed keyboard, User’s Quick Start Guide in English language (other

languages also available), accessory pouch, front panel cover, power cord, 10073C 10:1 passive probe (qty 4) and with

MSO version 54826-68701 logic cable kit.

Recommended probes

Model Description

1156A 1.5 GHz active probe

1130A 1.5 GHz InfiniiMax probe amplifier – No probe heads included 1

1. For a complete probing solution, also order a connectivity kit or individual probe head(s) (E2675A, E2668A, E2669A).

For more information on selecting the right probe see page 19.

Memory options

Option number – Factory installed Option number – User installed Description

080 N5407A-080 16 Mpts on 2 channels, 8 Mpts on 4 channels

160 N5407A-160 32 Mpts on 2 channels, 16 Mpts on 4 channels

320 N5407A-320 64 Mpts on 2 channels, 32 Mpts on 4 channels

640 N5407A-640 128 Mpts on 2 channels, 64 Mpts on 4 channels

Memory can be added both at the time of initial purchase and after with a user installed option.

For a comprehensive list and selection criteria, refer to the Oscilloscopes Probes and Accessories Selection Guide (Agilent

publication number 5989-6162EN). Or visit our Web site at www.agilent.com/find/scope_probes.

Options Description

Application options

Digital analysis

N5397A N5397A FPGA dynamic probe for Xilinx

N5433A N5433A FPGA dynamic probe for Altera

Serial data analysis

Option 007 or N5391A Low-speed serial data analysis software for I2C and SPI serial communication buses

Option 008 or N5402A Automotive serial data analysis software for CAN and FlexRay decode

Option 003 or N5384A High-speed serial data analysis software for CAN and FlexRay serial communication buses

Jitter analysis

Option 002 or E2681A EZJIT jitter analysis software

E2690B Oscilloscope tools including advanced time interval and jitter analysis software from

Amherst Systems Associates

Compliance testing

E2625A Communication mask test kit

N5392A Ethernet performance validation and compliance software

N5416A USB 2.0 electrical performance validation and compliance software

U7233A DDR1 compliance test application

Power measurement analysis

U1882A Power measurement analysis for Infiniium oscilloscopes

Option 001 Oscilloscope-locked license

Option 002 PC-locked license

Vector signal analysis

89601A VSA software for Infiniium

Advanced triggering

Option 009 or N5415A InfiniiScan event identification software

User customized analysis software

Option 010 or N5430A User-defined function – seamless linkage to MATLAB to support custom functions

Option 006 or E2699A My Infiniium integration package enabling you to launch and integrate Windows application

directly from your scope

Hands free operation

E2682A VoiceControl software

Other options

Option 017 (factory installed) ≥ 40 GB removable hard disk drive. Replaces ≥ 40 GB internal hard disk with a ≥ 40 GB

removable hard disk. Order the N5422A for additional hard disk drive cartridges that contain

the full Windows operating system and oscilloscope application.

Option 019 or N5453A External touchscreen display for Infiniium oscilloscopes

Option 020 or N5437A External DVD-RW drive

E2609B Rackmount kit

Warranty

Select coverage

Included 3-year warranty (return to Agilent), standard

R-51B-001-5Z 5-year warranty assurance plan (return to Agilent): Priority warranty service includes one-

time coverage for an EOS/ESD failure.

Calibration

Select Agilent Calibration Plan

R-50C-011-3 3-year calibration assurance plan (return to Agilent): Priority calibration service covering all

calibration costs for 3 years; 15% cheaper than buying stand-alone calibrations.

R-50C-011-5 5-year calibration assurance plan (return to Agilent): Priority calibration service coveringall

calibration costs for 5 years; 20% cheaper than buying stand-alone calibrations.

A6J ANSI Z540-compliant calibration

Infiniium Ordering Information (continued)

Memory options

Publication title Publication type Publication

number

Infiniium Oscilloscope Probes and Accessories Data sheet 5968-7141EN/ENUS

E2688A, N5384A High-Speed Serial Data Analysis and Clock Recovery Software for

Infiniium Oscilloscopes

Data Sheet 5989-0108EN

EZJIT Plus Jitter Analysis Software for Infiniium Oscilloscopes Data Sheet 5989-0109EN

Agilent infiniium Oscilloscopes and 89601A Vector Signal Analysis Software Data Sheet 5989-0947EN

I2C and SPI Protocol Triggering and Decode for Infiniium 90000 Oscilloscopes Data Sheet 5989-1250EN

N5392A Ethernet Electrical Performance Validation and Compliance Software Data Sheet 5989-1527EN

MSO9000A and MSO 9000 H-Series N5397A FPGA Dynamic Probe for Xilinx Data Sheet 5989-1848EN

E2690B Oscilloscope Tools Data Sheet 5989-3525EN

N5402A Automotive Serial Data Analysis Software for Infiniium Oscilloscopes Data Sheet 5989-3632EN

N5416A and N5417A USB Compliance Test Software for Infiniium Oscilloscopes Data Sheet 5989-4044EN

InfiniiScan Event Identification software Data Sheet 5989-4605EN

N5430A Infiniium User-Defined Function Application for Infiniium Oscilloscopes Data Sheet 5989-5632EN

8000 Series Oscilloscopes – The Best Combination of Signal Viewing and Analysis Brochure 5989-5806EN

Agilent N5433A Infiniium MDO FPGA Dynamic Probe for Altera Data Sheet 5989-5940EN

Oscilloscope Probes and Accessories Selection Guide 5989-6162EN

Agilent Technologies Oscilloscope Application Solutions Poster Brochure 5989-6704EN

U7233A DDR1 Compliance Test Application with LPDDR and mobile-DDR Support for

Infiniium Series Oscilloscopes

Data Sheet 5989-7366EN

N5450A InfiniiMax Extreme Temperature Extension Cable Data Sheet 5989-7542EN

Related Literature

Agilent Technologies Oscilloscopes

Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications

myAgilent

www.agilent.com/find/myagilent

A personalized view into the information most relevant to you.

www.lxistandard.org

LAN eXtensions for Instruments puts the power of Ethernet and the

Web inside your test systems. Agilent is a founding member of the

LXI consortium.

Three-Year Warranty

www.agilent.com/find/ThreeYearWarranty

Beyond product specification, changing the ownership experience.

Agilent is the only test and measurement company that offers three-

year warranty on all instruments, worldwide.

Agilent Assurance Plans

www.agilent.com/find/AssurancePlans

Five years of protection and no budgetary surprises to ensure your

instruments are operating to specifications and you can continually

rely on accurate measurements.

www.agilent.com/quality

Agilent Electronic Measurement Group

DEKRA Certified ISO 9001:2008

Quality Management System

Agilent Channel Partners

www.agilent.com/find/channelpartners

Get the best of both worlds: Agilent’s measurement expertise and

product breadth, combined with channel partner convenience.

www.agilent.com

www.agilent.com/ﬁnd/8000family

For more information on Agilent

Technologies’ products, applications or

services, please contact your local Agilent

office. The complete list is available at:

www.agilent.com/find/contactus

Americas

Canada (877) 894 4414

Brazil (11) 4197 3600

Mexico 01800 5064 800

United States (800) 829 4444

Asia Paciﬁc

Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 112 929

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Other AP Countries (65) 375 8100

Europe & Middle East

Belgium 32 (0) 2 404 93 40

Denmark 45 45 80 12 15

Finland 358 (0) 10 855 2100

France 0825 010 700*

*0.125 €/minute

Germany 49 (0) 7031 464 6333

Ireland 1890 924 204

Israel 972-3-9288-504/544

Italy 39 02 92 60 8484

Netherlands 31 (0) 20 547 2111

Spain 34 (91) 631 3300

Sweden 0200-88 22 55

United Kingdom 44 (0) 118 927 6201

For other unlisted countries:

www.agilent.com/find/contactus

(BP-09-27-13)

Product specifications and descriptions in

this document subject to change without

notice.

Published in USA, December 11, 2013

5989-4271EN

Java is a U.S. trademark of Sun Microsystems, Inc.

MATLAB is a U.S. registered trademark of The MathWorks, Inc.

LabView is a U.S. registered trademark of National Instruments.

Intel is a U.S. registered trademark and Celeron is a U.S. trademark of Intel Corporation.

Visual Studio is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Windows is a U.S. registered trademark of Microsoft Corporation.

WiMAX is a trademark of the WiMAX Forum.