https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB connector, nominal cross section: 1.5 mm, color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, Number of potentials: 11, Number of rows: 1, Number of positions per row: 11, number of connections: 11, product range: IFMC 1,5/..-ST-RN, pitch: 3.5 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 0 , plug-in system: MINI COMBICON, Locking: Snap-in locking, type of packaging: packed in cardboard The figure shows a 10-position version of the product Your advantages Time saving push-in connection, tools not required Defined contact force ensures that contact remains stable over the long term Intuitive use through colour coded actuation lever Inverted connector with pin contacts for touch-proof device outputs or free-hanging cable/cable connections Intuitive locking mechanism prevents accidental disconnection Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356947541 Weight per Piece (excluding packing) 6.800 g Custom tariff number 85366990 Country of origin Slovakia Technical data Item properties Brief article description Printed-circuit board connector Plug-in system MINI COMBICON 03/30/2021Page1/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Technical data Item properties Type of contact Male connector Range of articles IFMC 1,5/..-ST-RN Pitch 3.5 mm Number of positions 11 Locking Engagement nose Number of levels 1 Number of connections 11 Number of potentials 11 Electrical parameters Nominal current 8A Nom. voltage 160 V Rated voltage (III/3) 160 V Rated voltage (III/2) 160 V Rated voltage (II/2) 320 V Rated surge voltage (III/3) 2.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Connection capacity Connection method Push-in spring connection Conductor cross section solid 0.14 mm ... 1.5 mm Conductor cross section flexible 0.14 mm ... 1.5 mm Conductor cross section AWG / kcmil 24 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm ... 1.5 mm Conductor cross section, flexible, with ferrule, with plastic sleeve 0.14 mm ... 0.75 mm Stripping length 10 mm Specifications for ferrules Recommended crimping pliers 1212034 CRIMPFOX 6 Ferrules without insulating collar, according to DIN462281 Cross section:0.25 mm; Length: 5 mm ... 7 mm Cross section:0.34 mm; Length: 7 mm Cross section:0.5 mm; Length: 8 mm ... 10 mm Cross section:0.75 mm; Length: 8 mm ... 10 mm Cross section:1 mm; Length: 8 mm ... 10 mm Cross section:1.5 mm; Length: 10 mm Recommended crimping pliers 1212034 CRIMPFOX 6 Ferrules with insulating collar, according to DIN462284 Cross section:0.14 mm; Length: 8 mm Cross section:0.34 mm; Length: 8 mm ... 10 mm 03/30/2021Page2/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Technical data Specifications for ferrules Cross section:0.5 mm; Length: 8 mm ... 10 mm Cross section:0.75 mm; Length: 10 mm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics hot-dip tin-plated Metal surface terminal point (top layer) Tin (4 - 8 m Sn) Metal surface contact area (top layer) Tin (4 - 8 m Sn) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN60695-2-12 850 Glow wire ignition temperature GWIT according to EN60695-2-13 775 Temperature for the ball pressure test according to EN60695-10-2 125 C Material data - actuating element Insulating material PBT CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Dimensions for the product Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center Length [ l ] 24.6 mm Width [ w ] 42.1 mm Height [ h ] 7.8 mm Pitch 3.5 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. Ambient conditions Ambient temperature (storage/transport) -40 C ... 70 C 03/30/2021Page3/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Technical data Ambient conditions Ambient temperature (assembly) -5 C ... 100 C Ambient temperature (operation) -40 C ... 100 C (dependent on the derating curve) Termination and connection method Conductor connection test The stripped-off ends of the largest conductor can be completely inserted in the opening of the terminal point without using excessive force. Test result Test passed Test - repeated connection and release IEC 60999-1:1999-11 Test passed Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Conductor cross section / conductor type / tensile force 0.2 mm / solid / > 10 N 0.2 mm / flexible / > 10 N 1.5 mm / solid / > 40 N 1.5 mm / flexible / > 40 N Mechanical tests according to standard Test specification IEC 61984 Visual inspection IEC 60512-1-1:2002-02 Dimension check IEC 60512-1-2:2002-02 Resistance of inscriptions IEC 60068-2-70:1995-12 Insertion and withdrawal force IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 5N Withdraw strength per pos. approx. 4N Polarization and coding IEC 60512-13-5:2006-02 Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 1.5 mm Minimum clearance - inhomogeneous field (III/2) 1.5 mm Minimum clearance - inhomogeneous field (II/2) 1.5 mm Minimum creepage distance value (III/3) 2 mm Minimum creepage distance value (III/2) 1.5 mm Minimum creepage distance value (II/2) 1.6 mm 03/30/2021Page4/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Technical data Electrical tests - Function Specification IEC 60999-1:1999-11 Temperature cycles Specification IEC 60999-1:1999-11 Current carrying capacity / derating curves Caption Type: FMC 1,5/...-ST-3,5-RF with IFMC 1,5/...-ST-3,5-RN Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 5N Withdraw strength per pos. approx. 4N Polarization when inserted requirement >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 2.7 m Insertion/withdrawal cycles 25 Contact resistance R2 2.8 m Impulse withstand voltage at sea level 2.95 kV Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 12 Upper limiting temperature requirements <100 C Test passed Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 C/2 h Thermal stress 100 C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 C/1 cycle Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV 3 3 Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values 03/30/2021Page5/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Drawings 16 14 12 10 8 6 4 2 0 Dimensional drawing 24,6 = 2-pos. = 5-pos. = 12-pos. 0 10 20 30 1,4 a+4,2 7,8 Current strength [A] Diagram 2,1 40 50 60 70 80 90 100 110 3,5 a Ambient temperature [C] Type: FMC 1,5/...-ST-3,5-RF with IFMC 1,5/...-ST-3,5-RN Classifications eCl@ss eCl@ss 10.0.1 27440309 eCl@ss 11.0 27460202 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 6.0 EC002638 ETIM 7.0 EC002638 UNSPSC UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals 03/30/2021Page6/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Approvals Approvals VDE Gutachten mit Fertigungsuberwachung / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approval details VDE Gutachten mit Fertigungsuberwachung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 160 V Nominal current IN 8A mm/AWG/kcmil 0.2-1.5 IECEE CB Scheme 40011723 http://www.iecee.org/ Nominal voltage UN 160 V Nominal current IN 8A mm/AWG/kcmil 0.2-1.5 DE1-60987-B1B2 EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19920306 B C Nominal voltage UN 150 V 50 V Nominal current IN 8A 8A mm/AWG/kcmil 24-16 24-16 Accessories Accessories 03/30/2021Page7/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Accessories Cable end sleeve Ferrule-A 0,25- 5-3202465 Ferrule, length: 5 mm, color: silver Ferrule-A 0,25- 7-3202478 Ferrule, length: 7 mm, color: silver Ferrule-A 0,34- 7-3009202 Ferrule, length: 7 mm, color: silver Ferrule-A 0,5 - 8-3202481 Ferrule, length: 8 mm, color: silver Ferrule-A 0,5 -10-3202494 Ferrule, length: 10 mm, color: silver 03/30/2021Page8/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Accessories Ferrule-A 0,75- 8-3202504 Ferrule, length: 8 mm, color: silver Ferrule-A 0,75-10-3200234 Ferrule, length: 10 mm, color: silver Ferrule-A 1 - 8-3202517 Ferrule, length: 8 mm, color: silver Ferrule-A 1 -10-3200250 Ferrule, length: 10 mm, color: silver Ferrule-A 1,5 -10-3200276 Ferrule, length: 10 mm, color: silver 03/30/2021Page9/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Accessories Ferrule-AI 0,14- 8 GY -1000-3203011 Ferrule, sleeve length: 8 mm, length: 12.5 mm, color: gray Ferrule-AI 0,34- 8 TQ-3203066 Ferrule, sleeve length: 8 mm, length: 12.5 mm, color: turquoise Ferrule-AI 0,34-10 TQ-3241129 Ferrule, sleeve length: 10 mm, length: 14.5 mm, color: turquoise Ferrule-AI 0,5 - 8 WH-3200014 Ferrule, sleeve length: 8 mm, length: 14 mm, color: white Ferrule-AI 0,5 -10 WH-3201275 Ferrule, sleeve length: 10 mm, length: 16 mm, color: white 03/30/2021Page10/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Accessories Ferrule-AI 0,75- 8 GY-3200519 Ferrule, sleeve length: 8 mm, length: 14 mm, color: gray Ferrule-AI 0,75-10 GY-3201288 Ferrule, sleeve length: 10 mm, length: 16 mm, color: gray Ferrule-AI 0,25- 8 YE-3203037 Ferrule, sleeve length: 8 mm, length: 12.5 mm, color: yellow Crimping tool Crimping pliers-CRIMPFOX 6-1212034 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25mm...6.0mm, lateral entry, trapezoidal crimp Marker pen Marker pen-B-STIFT-1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm 03/30/2021Page11/12 https://www.phoenixcontact.com/us/products/1844196 Printed-circuit board connector-IFMC 1,5/11-ST-3,5-RN-1844196 Accessories Screwdriver tools Screwdriver-SZS 0,4X2,5 VDE-1205037 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip Terminal marking Marker card-SK U/2,8 WH:UNBEDRUCKT-0803883 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels: 3600 Marker card-SK U/2,8 WH:UNBEDRUCKT-0803883 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels: 3600 Additional products Printed-circuit board connector-FMC 1,5/11-ST-3,5-RF-1952115 PCB connector, nominal cross section: 1.5 mm, color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, Number of potentials: 11, Number of rows: 1, Number of positions per row: 11, number of connections: 11, product range: FMC 1,5/..-ST-RF, pitch: 3.5 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 0 , plug-in system: MINI COMBICON, Locking: Snap-in locking, type of packaging: packed in cardboard Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 03/30/2021Page12/12