Front view and mounting Side view Rear view 10+0.5 15.5 Max. oS 0.8 Connector: XH-6Y or equivalent . r da " = 7 - i i \ S A = of UL1095 AWG26 os ot L=250+10 5 StL 1,520.25 CONNECTION | UNIPOLAR OR BIPOLAR TYPE OF CONNECTION VOLTAGE (VDC 12 17 BIPOLAR [CONNECTOR we a = a = Fr UNFOLA THRO Se PN NO ens WINDING RESISTANCE/PHASE (Ohms)@25 | _50+10% 10010% | Ay lec 5 TBI couf INDUCTANCE/PHASE (mH) @1KHz/N| _ 12+20% 64420% a | ee \ A\[__3__[ReD__|A\ HOLDING TORQUE (Nm) [Ib-in] AX) 0.011 [0.098] 0.016 [0.139] B |BJ|p -_2__| Bw BY DETENT TORQUE (Nm) [lbin] 4.0x10 [0.035] BN [OH Tay SRN ty STEP ANGLE () 75 for >speed =I STEP_ACCURACY (NON-ACCUW) +7% q for <speed -- J WIRING DIAGRAM ROTOR INERTIA (Kgm) [Ib-i 1.0x107 [3.416x10* Kkg-m) [bin] x07 [5416x107 ] FULL STEP 2 PHASE-Ex., (A)WHT WEIGHT (Kg) [b] 0.036 [0.079] WHEN FACING MOUNTING END (X) TEMPERATURE RISE: MAX.80C (MOTOR STANDSTILL; FOR 2 PHASE ENERGIZED) |AXIALFORCE Fa (N) Fo=1.5 spe oTA TE vt (COM)BLK AMBIENT TEMPERATURE 10'~ 40C [14F ~ 104F] A\ DISTANCE a (mm) | 1/2 SCHAFTLENGTH tats \ \ (A\)RED INSULATION RESISTANCE 100 MOhm (UNDER NORMAL TEMPERATURE AND HUMIDITY) |RADIAL-FORCE Fr (N)| _ Fr=3.0 stats | | | INSULATION CLASS E 120C [248F] A\ AXIAL | RADIAL 3 T+ 32d DIELECTRIC STRENGTH 650VAC FOR 2 SEC. (BETWEEN THE MOTOR COILS AND THE MOTOR CASE) /\ | SHAFT PLAY (mm) | 0.08 | 0.06 4 T1471 ew a = = AMBIENT HUMIDITY MAX. 85% (NO CONDENSATION) AT LOAD MAX: (N) [| 45 [ 4.5 s @ | SCALE FREE |APVD | S.Hfa, |12.03.07 W Nanotec |; sos TCHKD STEPPING MOTOR 1 | DRAWING UPDATED 22.07.09 | v.W. PUG Se OOME {NE $02 TORN | Vv. W. (08.11.06 | DWG.NO REV | DESCRIPTION DATE APVD | SP25/5M0206-A ANGLE 330 | SIGNATURE DATE SP2575M0206-A