CONTACT ORIENTATION ON ROLL(3000PCS/COIL) NOTES : (UNLESS OTHERWISE SPECIFIED) 1. MATERIAL : 1.1. CONTACT BODY : COPPER ALLOY. 1.2. OUTER SPRING : STAINLESS STEEL. . SPECIFICATIONS : 2.1 CURRENT RATING : 13A MAX. 2.2 TERMINATION TYPE : CRIMPING. 2.3 WIRE RANGE : 16~18AWG. 2.4 WIRE INSULATION DIA(MAX) : 43.2mm. . ROHS COMPLIANT. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. . AVAILABLE TOOLS : 5.1 HAND CRIMPER : MFX-3954. 5.2 CRIMP APPLICATOR : MFX-3957. 5.3 EXTRACTION TOOL : QXRT16. P/N CONTACT PLATING(MATING AREA) SS16M2T TIN PLATING OVER NICKEL. SS16M2N NICKEL PLATING OVER COPPERIZE. SS16M2F GOLD FLASH PLATING OVER NICKEL. SS16M2G5 5yu"GOLD PLATING OVER NICKEL. $S16M2G10 10u"GOLD PLATING OVER NICKEL. SS16M2G15 15u"GOLD PLATING OVER NICKEL. $S16M2G30 30u"GOLD PLATING OVER NICKEL. 2.4 l <j SECTION A-A SECTION B-B 3.7 REVISIONS REV ECO DESCRIPTION DATE BY APPR Al - RELEASED DRAWING Jul-16-18 Flan Tommy \ 8.9 3.8 3.9 18.0_REF 11.6 oN oma | Ob 3ZIS OMV81-9)'C3d NWLS LOVINOO LAY00S'SIWW'003 sau | XXZW9LSS QUANTITY PART NUMBER DESCRIPTION ITEM |} wo} cus | LW :nae | MATERIALS LIST UNLESS OTHERWISE SPECIFIED SIGNATURES | DATE 1) All di ions are in 2) Tolerances are as follows: 4 PL DEG 40.30 | Fractions +1/64 2PL DEC +0.15 | angles +1 3 PL DEC 40.08 3) Nota referance = A MATERIAL SPECIFICATIONS: PROCESS SPECIFIGATIONS: NEXT ASSY: DRAWN: Flan Jul-16-18 CHECKED: Tod Jul-16-18 ENGINEER: [APPROVAL- Tommy | luk 16-18 Amphenol 44724 Morley Drive Clinton Township, MI 48036 Sine Systems - www.amphenol-sine.com CUSTOMER: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, ECO-MATE,SOCKET CONTACT, STAMPED, 16-18AWG,SIZE 16 SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL MANUFACTURING VARIATIONS. DATA [Size [Pe |" SSteMaxx B |c- REVISION Ai |sveer 1 PAENONE OF 1