BXRC-30A10K1-L-23 - Bridgelux, Inc.

Bridgelux® Decor Series™ Class A LED Array

Product Data Sheet DS35

BXRC-30A1001 | 30A2001 | 30A4001 | 30A10K1

BXRC-35A1001 | 35A2001 | 35A4001 | 35A10K1

BXRC-40A1001 | 40A2001 | 40A4001 | 40A10K1

Introduction

Bridgelux® Décor Series™ Class A products are a revolutionary advancement in lighting designed to match how humans

perceive and prefer light. The Class A specication was created by the Lighting Research Center (LRC) behavior studies

in conjunction with Bridgelux and other ASSIST members. Based on human factor response testing, the Décor Series

Class A products provide vibrant, natural and brilliant looking light, evoking an emotional attraction and response. The

Décor Series Class A products were developed for high-end retail, museum, architectural, premium building and

hospitality applications.

Bridgelux Décor Series Class A products are available on all Vero form factors. The Vero platform has been engineered

with advanced connectivity options and can operate over a broad current range, enabling multiple degrees of exibility

in luminaire design optimization.

Vero

Features

• Light quality is based on human perception of

color and light

• High gamut area index (GAI)

• No harmful UV or near IR light in the spectrum

• Substantially broader GAI and color spectrum

than halogen

• Radial die pattern enhances optical uniformity

• Based on Bridgelux Vero COB LED array platform

Benets

• Broad application coverage for interior and

exterior lighting

• Flexibility for application driven lighting design

requirements

• High quality true color reproduction

• Uniform consistent white light

• Flexibility in design optimization

• Enhanced ease of use and manufacturability

Contents

Product Feature Map 2

Product Nomenclature 2

Product Selection Guide 3

Performance at Commonly Used Drive Currents 5

Electrical Characteristics 7

Absolute Maximum Ratings 8

Performance Curves 9

Typical Radiation Pattern 16

Mechanical Dimensions 17

Packaging and Labeling 21

Design Resources 24

Precautions 24

Disclaimers 24

About Bridgelux 25

Product Feature Map

In addition to delivering the performance and light quality

required for many lighting applications, Décor Series

Class A LED arrays incorporate several features to

Product Nomenclature

The part number designation for Bridgelux Vero LED arrays is explained as follows:

simplify the design integration and manufacturing process,

accelerate time to market and reduce system costs.

1 2 3 4 5 6 7 8 9 10 11 – 12 – 13 14

Product Family CCT Bin Options

23 = 3 SDCM

Nominal Flux

1001- 1000lm

2001- 2000lm

4001- 4000lm

10K1- 10,000lm

Typical GAI

GAI >80

Array Conguration

Nominal CCT

30 = 3,000K

35 = 3,500K

40 = 4,000K

BXRC – 30 A 1001 – x – 23

2D barcode provides full manufacturing traceability

Polarity indication marks simplify

manufacturing operator instructions

Optics location/mounting features

Mounting holes

Zhaga Book 3 compatible

mounting locations

Solderless connector port enables simplied

manufacturing processes, reduced inventory

carrying costs and can enable eld upgradability

Thermally isolated solder pads reduce

manufacturing cycle time and complexity

Tc Measurement point

Radial die conguration improves lumen

density and beam control

Optional Molex Pico-EZmate™ connector harness

(sold separately)

Top side part number marking improves

inventory management and outgoing

quality control

Product Selection Guide

The following product congurations are available:

Table 1: Selection Guide, Pulsed Measurement Data (Tj = Tc = 25°C)

Notes for Tables 1 & 2:

1. Nominal CCT is dened by the Lighting Research Center’s Class A denition. The center of the Class A color bin is on the corresponding isothermal line.

2. To help ensure optimal xture level performance, GAI is measured at the xture level, on axis, at a case temperature of 70°C. GAI may vary depending

on xture design and performance.

3. CRI Values are specied as typical. Typical R9 value for 3000K products is 90. CRI and R Values are measured at 25C pulsed.

4. Drive current is referred to as nominal drive current.

5. Products tested under pulsed condition (10ms pulse width) at nominal test current where Tj (junction temperature) = Tc (case temperature) = 25°C.

6. Typical performance values are provided as a reference only and are not a guarantee of performance.

7. Bridgelux maintains a ±7% tolerance on ux measurements.

8. Minimum ux values at the nominal test current are guaranteed by 100% test.

9. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.

10. Typical performance is estimated based on operation under DC (direct current) with LED array mounted onto a heat sink with thermal interface material

and the case temperature maintained at specied temperature. Based on Bridgelux test setup, values may vary depending on the thermal design of the

luminaire and/or the exposed environment to which the product is subjected.

11. Minimum ux values at elevated temperatures are provided for reference only and are not guaranteed by 100% production testing. Based on Bridgelux

test setup, values may vary depending on the thermal design of the luminaire and/or the exposed environment to which the product is subjected.

Product Part Number

Nominal

CCT1

(K)

GAI2 CRI3

Nominal

Drive

Current4

(mA)

Typical Pulsed

Flux5,6,7

Tc = 25ºC

(lm)

Minimum

Pulsed Flux7,8

Tc = 25ºC

(lm)

Typical

(V)

Typical

Power

(W)

Typical

Ecacy

(lm/W)

Décor Class A Vero 10 BXRC-30A1001-B-23 3000 80 93 350 820 750 26.5 9.3 88

Décor Class A Vero 10 BXRC-35A1001-B-23 3500 80 93 350 909 849 26.5 9.3 98

Décor Class A Vero 10 BXRC-40A1001-B-23 4000 80 93 350 970 900 26.5 9.3 105

Décor Class A Vero 13 BXRC-30A2001-C-23 3000 80 93 500 1500 1394 32.3 16.2 93

Décor Class A Vero 13 BXRC-35A2001-C-23 3500 80 93 500 1628 1520 32.3 16.2 101

Décor Class A Vero 13 BXRC-40A2001-C-23 4000 80 93 500 1740 1625 32.3 16.2 108

Décor Class A Vero 18 BXRC-30A4001-F-23 3000 80 93 1050 2897 2695 29.5 31.0 94

Décor Class A Vero 18 BXRC-35A4001-F-23 3500 80 93 1050 3096 2893 29.5 31.0 100

Décor Class A Vero 18 BXRC-40A4001-F-23 4000 80 93 1050 3385 3157 29.5 31.0 109

Décor Class A Vero 29 BXRC-30A10K1-L-23 3000 80 93 2100 7483 7014 38 79.8 94

Décor Class A Vero 29 BXRC-35A10K1-L-23 3000 80 93 2100 8251 7712 38 79.8 103

Décor Class A Vero 29 BXRC-40A10K1-L-23 4000 80 93 2100 8666 8054 38 79.8 109

Table 2: Selection Guide, Stabilized DC Performance (Tc = 70°C) 9,10

Product Part Number

Nominal

CCT1

(K)

GAI2 CRI3

Nominal

Drive

Current4

(mA)

Typical DC

Flux6,7

Tc = 70ºC

(lm)

Minimum DC

Flux7,11

Tc = 70ºC

(lm)

Typical

(V)

Typical

Power

(W)

Typical

Ecacy

(lm/W)

Décor Class A Vero 10 BXRC-30A1001-B-23 3000 80 93 350 752 688 25.8 9.0 83

Décor Class A Vero 10 BXRC-35A1001-B-23 3500 80 93 350 834 779 25.8 9.0 92

Décor Class A Vero 10 BXRC-40A1001-B-23 4000 80 93 350 888 824 25.8 9.0 98

Décor Class A Vero 13 BXRC-30A2001-C-23 3000 80 93 500 1377 1280 31.5 15.8 87

Décor Class A Vero 13 BXRC-35A2001-C-23 3500 80 93 500 1509 1409 31.5 15.8 96

Décor Class A Vero 13 BXRC-40A2001-C-23 4000 80 93 500 1597 1491 31.5 15.8 101

Décor Class A Vero 18 BXRC-30A4001-F-23 3000 80 93 1050 2638 2454 28.7 30.2 87

Décor Class A Vero 18 BXRC-35A4001-F-23 3500 80 93 1050 2868 2680 28.7 30.2 95

Décor Class A Vero 18 BXRC-40A4001-F-23 4000 80 93 1050 3120 2910 28.7 30.2 103

Décor Class A Vero 29 BXRC-30A10K1-L-23 3000 80 93 2100 6886 6454 37.2 78.2 88

Décor Class A Vero 29 BXRC-35A10K1-L-23 3000 80 93 2100 7637 7138 37.2 78.2 98

Décor Class A Vero 29 BXRC-40A10K1-L-23 4000 80 93 2100 7977 7414 37.2 78.2 102

Product Selection Guide

The following product congurations are available:

Table 3: Selection Guide, Stabilized DC Performance (Tc = 85°C) 9,10

Notes for Table 3:

1. Nominal CCT is dened by the Lighting Research Center’s Class A denition. The center of the Class A color bin is on the corresponding isothermal line.

2. To help ensure optimal xture level performance, GAI is measured at the xture level, on axis, at a case temperature of 70°C. GAI may vary depending

on xture design and performance.

3. CRI Values are specied as typical. Typical R9 value for 3000K products is 90. CRI and R Values are measured at 25C pulsed.

4. Drive current is referred to as nominal drive current.

5. Products tested under pulsed condition (10ms pulse width) at nominal test current where Tj (junction temperature) = Tc (case temperature) = 25°C.

6. Typical performance values are provided as a reference only and are not a guarantee of performance.

7. Bridgelux maintains a ±7% tolerance on ux measurements.

8. Minimum ux values at the nominal test current are guaranteed by 100% test.

9. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.

10. Typical performance is estimated based on operation under DC (direct current) with LED array mounted onto a heat sink with thermal interface material

and the case temperature maintained at specied temperature. Based on Bridgelux test setup, values may vary depending on the thermal design of the

luminaire and/or the exposed environment to which the product is subjected.

11. Minimum ux values at elevated temperatures are provided for reference only and are not guaranteed by 100% production testing. Based on Bridgelux

test setup, values may vary depending on the thermal design of the luminaire and/or the exposed environment to which the product is subjected.

Product Part Number

Nominal

CCT1

(K)

GAI2 CRI3

Nominal

Drive

Current4

(mA)

Typical DC

Flux6,7

Tc = 85ºC

(lm)

Minimum DC

Flux7,11

Tc = 85ºC

(lm)

Typical

(V)

Typical

Power

(W)

Typical

Ecacy

(lm/W)

Décor Class A Vero 10 BXRC-30A1001-B-23 3000 80 93 350 728 666 25.5 8.9 81

Décor Class A Vero 10 BXRC-35A1001-B-23 3500 80 93 350 807 753 25.5 8.9 90

Décor Class A Vero 10 BXRC-40A1001-B-23 4000 80 93 350 861 799 25.5 8.9 96

Décor Class A Vero 13 BXRC-30A2001-C-23 3000 80 93 500 1332 1238 31.3 15.6 85

Décor Class A Vero 13 BXRC-35A2001-C-23 3500 80 93 500 1461 1364 31.3 15.6 93

Décor Class A Vero 13 BXRC-40A2001-C-23 4000 80 93 500 1545 1443 31.3 15.6 99

Décor Class A Vero 18 BXRC-30A4001-F-23 3000 80 93 1050 2543 2365 28.6 30.0 85

Décor Class A Vero 18 BXRC-35A4001-F-23 3500 80 93 1050 2781 2598 28.6 30.0 93

Décor Class A Vero 18 BXRC-40A4001-F-23 4000 80 93 1050 3025 2821 28.6 30.0 101

Décor Class A Vero 29 BXRC-30A10K1-L-23 3000 80 93 2100 6668 6250 36.8 77.3 86

Décor Class A Vero 29 BXRC-35A10K1-L-23 3000 80 93 2100 7399 6916 36.8 77.3 96

Décor Class A Vero 29 BXRC-40A10K1-L-23 4000 80 93 2100 7718 7173 36.8 77.3 100

Performance at Commonly Used Drive Currents

Vero LED arrays are tested to the specications shown using the nominal drive currents in Table 1. Vero may also

be driven at other drive currents dependent on specic application design requirements. The performance at any

drive current can be derived from the current vs. voltage characteristics shown in Figure 3-6 and the ux vs. current

characteristics shown in Figures 7-10. The performance at commonly used drive currents is summarized in Table 4.

Table 4: Product Performance at Commonly Used Drive Currents

Product Part Number GAI CRI

Drive

Current1

(mA)

Typical Vf

Tc = 25ºC

(V)

Typical

Power

Tj = 25ºC

(W)

Typical

Flux2

Tc = 25ºC

(lm)

Typical

DC Flux3

Tc = 85ºC

(lm)

Typical

Ecacy

Tj = 25ºC

(lm/W)

Décor Class

A Vero 10 BXRC-30A1001-B-23 80 93

175 24.9 4.4 435 386 100

350 26.5 9.3 820 728 88

500 27.6 13.8 1116 991 81

700 29 20.3 1454 1292 72

Décor Class

A Vero 10 BXRC-35A1001-B-23 80 93

175 24.9 4.4 482 428 111

350 26.5 9.3 909 807 98

500 27.6 13.8 1237 1098 90

700 29 20.3 1612 1430 79

Décor Class

A Vero 10 BXRC-40A1001-B-23 80 93

175 24.9 4.4 514 457 118

350 26.5 9.3 970 861 105

500 27.6 13.8 1321 1172 96

700 29 20.3 1720 1527 85

Décor Class

A Vero 13 BXRC-30A2001-C-23 80 93

175 30.2 5.3 572 508 108

350 31.4 11.0 1095 972 100

500 32.3 16.2 1500 1332 93

700 33.4 23.4 1995 1772 85

1050 35.1 36.9 2702 2400 73

Décor Class

A Vero 13 BXRC-35A2001-C-23 80 93

175 30.2 5.3 620 556 117

350 31.4 11.0 1188 1066 108

500 32.3 16.2 1628 1461 101

700 33.4 23.4 2165 1943 93

1050 35.1 36.9 2932 2631 80

Décor Class

A Vero 13 BXRC-40A2001-C-23 80 93

175 30.2 5.3 663 589 125

350 31.4 11.0 1270 1127 116

500 32.3 16.2 1740 1545 108

700 33.4 23.4 2314 2055 99

1050 35.1 36.9 3134 2783 85

Notes for Table 4:

1. Alternate drive currents in Table 4 are provided for reference only and are not a guarantee of performance.

2. Bridgelux maintains a ± 7% tolerance on ux measurements.

3. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.

Performance at Commonly Used Drive Currents

Table 4: Product Performance at Commonly Used Drive Currents

Product Part Number GAI CRI

Drive

Current1

(mA)

Typical Vf

Tc = 25ºC

(V)

Typical

Power

Tj = 25ºC

(W)

Typical

Flux2

Tc = 25ºC

(lm)

Typical

DC Flux3

Tc = 85ºC

(lm)

Typical

Ecacy

Tj = 25ºC

(lm/W)

Décor Class

A Vero 18 BXRC-30A4001-F-23 80 93

500 28.1 14.1 1483 1301 106

700 28.7 20.1 2025 1777 101

1050 29.5 31.0 2897 2543 94

1400 30.2 42.3 3692 3241 87

2100 31.6 66.4 5003 4391 75

Décor Class

A Vero 18 BXRC-35A4001-F-23 80 93

500 28.1 14.1 1584 1423 113

700 28.7 20.1 2164 1943 108

1050 29.5 31.0 3096 2781 100

1400 30.2 42.3 3946 3544 93

2100 31.6 66.4 5347 4803 81

Décor Class

A Vero 18 BXRC-40A4001-F-23 80 93

500 28.1 14.1 1732 1548 123

700 28.7 20.1 2366 2114 118

1050 29.5 31.0 3385 3025 109

1400 30.2 42.3 4314 3855 102

2100 31.6 66.4 5846 5224 88

Décor Class

A Vero 29 BXRC-30A10K1-L-23 80 93

500 35.1 17.6 1964 1750 112

700 35.6 24.9 2717 2421 109

1050 36.4 38.2 3991 3556 104

2100 38 79.8 7483 6668 94

2800 39 109.2 9506 8470 87

3150 39.5 124.4 10438 9301 84

4200 40.4 169.7 12895 11490 76

Décor Class

A Vero 29 BXRC-35A10K1-L-23 80 93

500 35.1 17.6 2166 1942 123

700 35.6 24.9 2996 2687 120

1050 36.4 38.2 4401 3946 115

2100 38 79.8 8251 7399 103

2800 39 109.2 10481 9399 96

3150 39.5 124.4 11510 10321 93

4200 40.4 169.7 14218 12750 84

Décor Class

A Vero 29 BXRC-40A10K1-L-23 80 93

500 35.1 17.6 2275 2026 129

700 35.6 24.9 3147 2803 126

1050 36.4 38.2 4622 4116 121

2100 38 79.8 8666 7718 109

2800 39 109.2 11009 9805 101

3150 39.5 124.4 12089 10767 97

4200 40.4 169.7 14933 13300 88

Notes for Table 4:

1. Alternate drive currents in Table 4 are provided for reference only and are not a guarantee of performance.

2. Bridgelux maintains a ± 7% tolerance on ux measurements.

3. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.

Electrical Characteristics

Notes for Table 5:

1. Parts are tested in pulsed conditions, Tc = 25°C. Pulse width is 10ms.

2. Voltage minimum and maximum are provided for reference only and are not a guarantee of performance.

3. Bridgelux maintains a tester tolerance of ± O.10V on forward voltage measurements.

4. Typical coecient of forward voltage tolerance is ± O.1mV for nominal current.

5. Thermal resistance values are based from test data of a 3000K 80 CRI product.

6. Thermal resistance value was calculated using total electrical input power; optical power was not subtracted from input power. The thermal

interface material used during testing is not included in the thermal resistance value.

7. Vf min hot and max cold values are provided as reference only and are not guaranteed by test. These values are provided to

aid in driver design and selection over the operating range of the product.

Table 5: Electrical Characteristics

Part Number

Nominal

Drive

Current 1

(mA)

Forward Voltage

Pulsed, Tc = 25ºC (V) 1, 2,3 Typical

Coecient

of Forward

Voltage4

∆Vf/∆TC

(mV/ºC)

Typical

Thermal

Resistance

Junction

to Case5,6

Rj-c (C/W)

Driver Selection

Voltages7

(V)

Minimum Typical Maximum

Vf Min.

Hot

Tc = 105ºC

(V)

Vf Max.

Cold4

Tc = -40ºC

(V)

BXRC-xxA1001-B-23

350 24.5 26.5 29.0 -16 0.47 23.2 29.5

700 26.5 29.0 31.2 -16 0.59 25.2 32.2

BXRC-xxA2001-C-23

500 29.9 32.3 34.7 -17 0.22 28.5 35.8

1050 32.0 35.1 37.9 -17 0.28 30.6 39.0

BXRC-xxA4001-F-23

1050 27.3 29.5 31.7 -15 0.13 26.1 32.7

2100 29.2 31.6 34.2 -15 0.17 28.0 35.2

BXRC-xxA10K1-L-23

2100 35.2 38.0 40.9 -20 0.06 33.6 42.2

4200 37.3 40.4 44.0 -20 0.07 35.7 45.3

Absolute Maximum Ratings

Parameter Maximum Rating

LED Junction Temperature 150°C

Storage Temperature -40°C to +105°C

Operating Case Temperature1,2 105°C

Soldering Temperature3350°C or lower for a maximum of 10 seconds

BXRC-xxA1001-B-23 BXRC-xxA2001-C-23 BXRC-xxA4001-F-23 BXRC-xxA10K1-L-23

Maximum Drive Current1700 mA 1050 mA 2100 mA 4200 mA

Maximum Peak Pulsed Drive Current41500 mA 1500 mA 3000 mA 6000 mA

Maximum Reverse Voltage5-45V -55 V -55 V -65 V

Table 6: Maximum Ratings

Notes for Table 6:

1. Please refer to Figures 1 and 2 for drive current derating curve for Vero 10 and Vero 29. Vero 13 and Vero 18 may be driven at 2 times nominal

current upto 105°C.

2. For IEC 62717 requirement, please contact Bridgelux Sales Support.

3. See Bridgelux Application Note AN31, Assembly Considerations for Vero LED arrays, for more information.

4. Bridgelux recommends a maximum duty cycle of 10% and pulse width of 20ms when operating LED Arrays at the maximum peak pulsed

current specied. Maximum peak pulsed current indicate values where the LED array can be driven without catastrophic failures.

5. Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition. Maximum rating provided

for reference only.

Performance Curves

The maximum allowable drive current for the Vero 10 and Vero 29 product families is dependent on the operating case

temperature. Please refer to the Product Feature Map (page 2) for the location of the Tc Point.

Figure 1: Vero 10 Drive Current Derating Curve

Notes for Figure 1:

1. In order to meet LM-80 lifetime projections Vero 10 may be driven up to 700mA at case temperatures up to 90°C. Operating conditions above

case temperatures of 90°C driving conditions must follow the Vero 10 Drive Current Derating Curve.

2. Lumen maintenance (L70) and lifetime predictions are valid for drive current and case temperature conditions used for LM-80 testing as included

in the applicable LM-80 test report for these products. Contact your Bridgelux sales representative for LM-80 report.

Performance Curves

Figure 2: Vero 29 Drive Current Derating Curve

Notes for Figure 2:

1. LM-80 Max Drive Current must not be exceeded in order to meet LM-80 lifetime projections.

2. Lumen maintenance (L70) and lifetime predictions are valid for drive current and case temperature conditions used for LM-80 testing as included

in the applicable LM-80 test report for these products. Contact your Bridgelux sales representative for LM-80 report.

Performance Curves

Figure 3: Vero 10 Drive Current vs. Forward Voltage

(Tj=Tc=25°C)

Figure 5: Vero 18 Drive Current vs. Forward Voltage

(Tj=Tc=25°C)

Figure 4: Vero 13 Drive Current vs. Forward Voltage

(Tj=Tc=25°C)

Figure 6: Vero 29 Drive Current vs. Forward Voltage

(Tj=Tc=25°C)

Performance Curves

Figure 7: Vero 10 Typical Relative Luminous Flux vs.

Drive Current

Figure 9: Vero 18 Typical Relative Luminous Flux vs.

Drive Current

Figure 8: Vero 13 Typical Relative Luminous Flux vs.

Drive Current

Figure 10: Vero 29Typical Relative Luminous Flux vs.

Drive Current

Performance Curves

Figure 11: Vero 10 Typical Relative Luminous Flux vs.

Case Temperature1

Figure 13: Vero 18 Typical Relative Luminous Flux vs.

Case Temperature1

Figure 12: Vero 13 Typical Relative Luminous Flux vs.

Case Temperature1

Figure 14: Vero 29 Typical Relative Luminous Flux vs.

Case Temperature1

Note for Figures 11-14:

1. Flux measurements taken under DC conditions.

Performance Curves

Figure 15: 3000K Class A Color Shift vs. Case

Temperature1

Figure 17: 4000K Class A Color Shift vs. Case

Temperature1

Figure 16: 3500K Class A Color Shift vs. Case

Temperature1

Note for Figures 15-17:

1. Measurements made under DC test conditions at the nominal drive current.

2. Typical color shift is shown with a tolerance of ±0.002.

Typical Radiation Pattern

Figure 18: Typical Spatial Radiation Pattern

Figure 19: Typical Polar Radiation Pattern

Notes for Figure 18:

1. Typical viewing angle is 120⁰.

2. The viewing angle is dened as the o axis angle from the centerline where Iv is ½ of the peak value.

Mechanical Dimensions

Figure 20: Drawing for Vero 10 LED Array

Notes for Figure 20:

1. Drawings are not to scale.

2. Drawing dimensions are in millimeters.

3. Unless otherwise specied, tolerances are ±0.01mm.

4. Mounting slots (2X) are for M2.5 screws.

5. Bridgelux recommends two tapped holes for mounting screws with 19.0 ± 0.10mm center-to-center spacing.

6. Screws with at shoulders (pan, dome, button, round, truss, mushroom) provide optimal torque control. Do NOT use at, countersink,

or raised head screws.

7. Solder pads and connector port are labeled “+” and “-“ to denote positive and negative, respectively.

8. It is not necessary to provide electrical connections to both the solder pads and the connector port. Either set may be used depending

on application specic design requirements.

9. Refer to Application Notes AN30 and AN31 for product handling, mounting and heat sink recommendations.

10. The optical center of the LED Array is nominally dened by the mechanical center of the array to a tolerance of ± 0.2mm.

11. Bridgelux maintains a atness of 0.10mm across the mounting surface of the array.

Mechanical Dimensions

Figure 21: Drawing for Vero 13 LED Array

Notes for Figure 21:

1. Drawings are not to scale.

2. Drawing dimensions are in millimeters.

3. Unless otherwise specied, tolerances are ±0.01mm.

4. Mounting holes (2X) are for M2.5 screws.

5. Bridgelux recommends two tapped holes for mounting screws with 31.4 ± 0.10mm center-to-center spacing.

6. Screws with at shoulders (pan, dome, button, round, truss, mushroom) provide optimal torque control. Do NOT use at, countersink,

or raised head screws.

7. Solder pads and connector port are labeled “+” and “-“ to denote positive and negative, respectively.

8. It is not necessary to provide electrical connections to both the solder pads and the connector port. Either set may be used depending on

application specic design requirements.

9. Refer to Application Notes AN30 and AN31 for product handling, mounting and heat sink recommendations.

10. The optical center of the LED Array is nominally dened by the mechanical center of the array to a tolerance of ± 0.2mm.

11. Bridgelux maintains a atness of 0.10mm across the mounting surface of the array.

Mechanical Dimensions

Figure 22: Drawing for Vero 18 LED Array

Notes for Figure 22:

1. Drawings are not to scale.

2. Drawing dimensions are in millimeters.

3. Unless otherwise specied, tolerances are ±0.01mm.

4. Mounting holes (2X) are for M2.5 screws.

5. Bridgelux recommends two tapped holes for mounting screws with 31.4 ± 0.10mm center-to-center spacing.

6. Screws with at shoulders (pan, dome, button, round, truss, mushroom) provide optimal torque control. Do NOT use at, countersink,

or raised head screws.

7. Solder pads and connector port are labeled “+” and “-“ to denote positive and negative, respectively.

8. It is not necessary to provide electrical connections to both the solder pads and the connector port. Either set may be used depending

on application specic design requirements.

9. Refer to Application Notes AN30 and AN31 for product handling, mounting and heat sink recommendations.

10. The optical center of the LED Array is nominally dened by the mechanical center of the array to a tolerance of ± 0.2mm.

11. Bridgelux maintains a atness of 0.10mm across the mounting surface of the array.

Mechanical Dimensions

Figure 23: Drawing for Vero 29 LED Array

Notes for Figure 23:

1. Drawings are not to scale.

2. Drawing dimensions are in millimeters.

3. Unless otherwise specied, tolerances are ±0.01mm.

4. Mounting holes (2X) are for M3 screws.

5. Bridgelux recommends two tapped holes for mounting screws with 43.0 ± 0.10mm center-to-center spacing.

6. Screws with at shoulders (pan, dome, button, round, truss, mushroom) provide optimal torque control. Do NOT use at, countersink,

or raised head screws.

7. Solder pads and connector port are labeled “+” and “-“ to denote positive and negative, respectively.

8. It is not necessary to provide electrical connections to both the solder pads and the connector port. Either set may be used depending

on application specic design requirements.

9. Refer to Application Notes AN30 and AN31 for product handling, mounting and heat sink recommendations.

10. The optical center of the LED Array is nominally dened by the mechanical center of the array to a tolerance of ± 0.2mm.

11. Bridgelux maintains a atness of 0.10mm across the mounting surface of the array.

Packaging and Labeling

Figure 24: Drawing for Vero 10 Packaging Tray

Figure 25: Drawing for Vero 13 Packaging Tray

Notes for Figure 24:

1. Dimensions are in mllimeters.

2. Drawing is not to scale.

Notes for Figure 25:

1. Dimensions are in mllimeters.

2. Drawing is not to scale.

Packaging Labeling

Figure 26: Drawing for Vero 18 Packaging Tray

Figure 27: Drawing for Vero 29 Packaging Tray

Notes for Figure 26:

1. Dimensions are in mllimeters.

2. Drawing is not to scale.

Notes for Figure 27:

1. Dimensions are in mllimeters.

2. Drawing is not to scale.

Packaging and Labeling

Figure 28: Vero Series Packaging and Labeling

Notes for Figure 33:

1. Each tray holds for Vero 10: 200 COBs, Vero 13: 100 COBs, Vero 18: 100 COBs, Vero 29: 50 COBs.

2. Each tray is vacuum sealed in an anti-static bag and placed in its own box.

3. Each tray, bag and box is to be labeled as shown above.

Figure 29: Product Labeling

Bridgelux COB arrays have laser markings on the back side of the substrate to help with product identication. In

addition to the product identication markings, Bridgelux COB arrays also contain markings for internal Bridgelux

manufacturing use only. The image below shows which markings are for customer use and which ones are for

Bridgelux internal use only. The Bridgelux internal manufacturing markings are subject to change without notice,

however these will not impact the form, function or performance of the COB array.

Customer Use- 2D Barcode

Scannable barcode provides

product part number and other

Bridgelux internal production

information.

Internal Bridgelux use only.

Customer Use- Product part number

Design Resources

Disclaimers

Precautions

Application Notes

Bridgelux has developed a comprehensive set of

application notes and design resources to assist

customers in successfully designing with the Vero

product family of LED array products. For all available

application notes visit www.bridgelux.com.

Optical Source Models

Optical source models and ray set les are available

for all Bridgelux products. For a list of available formats,

visit www.bridgelux.com.

MINOR PRODUCT CHANGE POLICY

The rigorous qualication testing on products oered

by Bridgelux provides performance assurance. Slight

cosmetic changes that do not aect form, t, or function

may occur as Bridgelux continues product optimization.

CAUTION: CHEMICAL EXPOSURE HAZARD

Exposure to some chemicals commonly used in

luminaire manufacturing and assembly can cause

damage to the LED array. Please consult Bridgelux

Application Note AN31 for additional information.

CAUTION: EYE SAFETY

Eye safety classication for the use of Bridgelux Vero

LED arrays is in accordance with IEC specication

EN62471: Photobiological Safety of Lamps and Lamp

Systems. Vero LED arrays are classied as Risk Group

1 (Low Risk) when operated at or below the maximum

drive current. Please use appropriate precautions. It

is important that employees working with LEDs are

trained to use them safely.

CAUTION: RISK OF BURN

Do not touch the Vero LED array during operation. Allow

the array to cool for a sucient period of time before

handling. The Vero LED array may reach elevated tem-

peratures such that could burn skin when touched.

3D CAD Models

Three dimensional CAD models depicting the product

outline of all Bridgelux Vero LED arrays are available

in both IGS and STEP formats. Please contact your

Bridgelux sales representative for assistance.

CAUTION

CONTACT WITH LIGHT EMITTING SURFACE (LES)

Avoid any contact with the LES. Do not touch the

LES of the LED array or apply stress to the LES

(yellow phosphor resin area). Contact may cause

damage to the LED array.

Optics and reectors must not be mounted in contact

with the LES (yellow phosphor resin area). Optical

devices may be mounted on the top surface of the

plastic housing of the Vero LED array. Use the

mechanical features of the LED array housing, edges

and/or mounting holes to locate and secure optical

devices as needed.

STANDARD TEST CONDITIONS

Unless otherwise stated, array testing is performed

at the nominal drive current.

About Bridgelux: We Build Light That Transforms

registered trademarks, and Decor Series is a trademark of Bridgelux, Inc. All other trademarks are the property of their respective owners.

Bridgelux Vero Decor Series Class A Product Data Sheet DS35 Rev C (03/2016)

101 Portola Avenue

Livermore, CA 94551

Tel (925) 583-8400

Fax (925) 583-8410

www.bridgelux.com

At Bridgelux, we help companies, industries and people experience the power and possibility

of light. Since 2002, we’ve designed LED solutions that are high performing, energy ecient,

cost eective and easy to integrate. Our focus is on light’s impact on human behavior, deliver-

ing products that create better environments, experiences and returns—both experiential and

nancial. And our patented technology drives new platforms for commercial and industrial

luminaires.

For more information about the company, please visit

bridgelux.com

twitter.com/Bridgelux

facebook.com/Bridgelux

WeChat ID: BridgeluxInChina