www.Amprobe.com AT-4000-A Advanced Wire Tracer Series Advanced in Wire Tracing Technology R-4000 T-4000-A Quickly trace energized and non-energized wires effortlessly with the Amprobe AT-4000-A Wire Tracer Series. Out-performing other wire tracers in its class, these advanced tracers combine features and functions to make locating wires more accurate and your job more efficient. AT-4001-A Advanced Wire Tracer with Soft Case AT-4003-A Advanced Wire Tracer AT-4004-A Advanced Wire Tracer with Clamp-On Attachment AT-4005-A Advanced Wire Tracer with Clamp-On Attachment, Battery Booster & Charger AT-4005-A * Determines presence of energized or nonenergized wires hidden behind walls, flooring or conduit * Get accurate readings without rotating the unit - receiver is not position sensitive * Pinpoints wires, breakers, neutrals, shorts, broken wires and ground lines * Clamp-on attachment injects signal for noncontact operation (AT-4004-A and AT-4005-A only) * Operates safely and easily without interrupting power or interfering with sensitive electronic equipment * Optional Battery Booster accessory strengthens signal for open tracing (AT-4005-A only) AT-4000-A Specifications Specifications AT-4001-A AT-4003-A Transmitter operating voltage AT-4004-A AT-4005-A 9 - 300 V ac Operating frequency 32.786kHz Receiver short mode range 6.01m (20') in air from the traced wire under test conditions Receiver open mode range 3.7m (12') in air from the traced wire under test conditions Receiver R-4000 Transmitter T-4000-A 110V Pigtail - banana plug cord set C2901 Alligator clip - banana plug cord set C2902 Grounding test lead 25' (7.6 m) MTL-G Alligator clip for ground lead VRC-320 Clamp-on transmitter accessory A2202 Rechargeable battery pack B2024 Battery pack recharger B2025 Users manual Carrying case Soft SV-1000 Hard CC-AT-4000 Hard CC-AT-4000 Hard CC-AT-4000 For more detailed specifications see users manual. (c)2013 Amprobe. All rights reserved. For detailed specifications and ordering info go to www.Amprobe.com 6001562 A www.Amprobe.com AT-4000-A Detailed Specifications Specifications Range Transmitter operating voltage 9 - 300 V ac Operating frequency 32.786 kHz Receiver range short mode (in air) Receiver range open mode (in air) Operating temperature Storage temperature Case material Case size Weight (AT-4005-A) 6.01m (20') in air from the traced wire under test conditions 3.7m (12') in air from the traced wire under test conditions -18C to 49C (0 to 120F) -40 to 66C (-40 to 150F) ABS 14 x 6.7mm (0.55" x 0.26") 3.72 kg (8.2lbs) R-4000 Receiver Detectors Sensitivity Electromagnetic Coil Array pick up for short mode. Electrostatic plate pick up for open mode. Low, mid, and high gain with precise sensitivity adjustment Short mode performance Over 6.01m (20') in air from the traced wire under test conditions. Open mode performance Over 3.7m (12') from the traced wire in air under test conditions. 50HZ, 60HZ, and 400HZ rejection Power source Display Case Weight 120db 9V alkaline battery 10 LEDs Flame retardant ABS 143.5 g (0.32 lbs) T-4000-A Transmitter Operating voltage Operating frequency Duty cycle Case 9 - 300 V 32.768 KHZ Transmit 2 pulses with a duration of 0.0625 seconds each, every 0.5 seconds Flame retardant ABS Display LCD Weight 143.5 g (0.32 lbs) Current output of the signal Fuse Low mode: 11 mA average, 30 mA peak Medium mode: 12 mA average, 36 mA peak High mode: 13 mA average, 63 mA peak Fast acting 250 mA @ 1000V (6X46mm) P/N: FA6X46MM Signal output (9v supply) High setting: 0.74 V ac; Medium setting: 0.61 V ac; Low setting: 0.53 V ac Battery 9V alkaline- 24 V jack will accept battery pack accessory (B2024 or B2025) A2202 Clamp-on Transmitter Accessory Operating frequency Case breakdown voltage Maximum wire size 32.768KHZ as supplied by T-4000 3000 V 2000 MCM or 5.08cm (2") diameter T-4000-A B2024 Battery Pack Type Capacity Rechargeable time Fuse Nickel-cadmium rechargeable (20 AA cells) 24 V, 600 mah 14 hours Internal, self-resetting B2025 Recharger / Converter Input Output 115 V ac 24 V dc @ 350 mah For complete specifications please download the product datasheet and the users manual on www.Amprobe.com. Amprobe(R) info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE (267-7623) (c)2013 Amprobe. All rights reserved. Amprobe(R) Europe In den Engematten 14, 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 For detailed specifications and ordering info go to www.Amprobe.com 6001562 A