Data Sheet CO2-200 CO2 Wall-Mounted Meter Instant feedback with CO2 levels, with additional temperature and humidity measurement s. Built in alarm to warn against dangerous CO2 levels. The permanent mounted CO2-200 Air Quality meter is designed to measure air quality compliance in critical environment controlled areas such as laboratories and production. n Low drift wall mounted meter for monitoring indoor air quality n CO2 Measurement up to 9999 ppm, Temperature, Relative humidity, Dew Point and Wet Bulb n Super-Large LCD display with CO2 reading n High performance low drift sensor designed with NDIR (Non-Dispersive Infrared) waveguide technology with automatic background calibration No hassle warranty n Audible alarm threshold setting to setup warning against carbon dioxide level with output drive relay to control air flow system No waiting. n Optional PC download capabilities (USB interface) No shipping charges. n Data Hold Our commitment to high-quality products and customer service is demonstrated by our industry exclusive "No Hassle" warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. n Recording of Maximum, Minimum and Average values with recall function (note: $500 MSLP limit) Amprobe(R) Test Tools www.Amprobe.com Data Sheet CO2-200 CO2 Wall-Mounted Meter Specifications Measuring Range Resolution Accuracy Temperature Temp. Range RH Range Accuracy DP (Dew Point Temp.) WB (Wet Bulb Temp.) Warm-up Time Response Time Current Consumption Operating Condition Dimension Storage condition Power Supply Standard packing includes Weight CO2 0 ~ 9999 ppm 2001 ~ 9999 ppm (out of scale range) 1ppm - CO2 concentration, 0.1C / F - Temp, 0.1% RH - Humidity 75ppm5% of reading (0 ~ 2000 ppm) Others range accuracy are not specified 0.6C / 0.9F -10C to 60C (14F to 140F) 0% ~ 95% 3% RH (at25C, 10-90%) others 5% for other RH range -20C to 59.9C (-4F to 139.8F) -5.0C to 59.9C (23F to 139.8F) 30 seconds About 30 seconds < 50mA average, < 310mA peak current ( ~55ms) 0 ~ 50C (32F to 122F), 0 ~ 95% RH (avoid condensation) for CO2 130(L) x 85(W) x 60(H) mm (5.1 x 3.3 x 2.4 in) -20C to 60C (-4F to 140F), 0~99%RH (avoid condensation) 12 VDC adaptor Meter, Manual, Power adapter 100-240vac Approx. 193g (0.43 lb) Amprobe(R) Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE Amprobe(R) Test Tools Europe In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 (c)2009 Amprobe Test Tools. All rights reserved. 7/2009 3520597 Rev A Amprobe(R) Test Tools www.Amprobe.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AMPROBE: CO2-200