No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
(note: $500 MSLP limit)
Amprobe® Test Tools www.Amprobe.com
Data Sheet
CO2 Wall-Mounted Meter
Instant feedback with CO2 levels, with additional temperature
and humidity measurement s. Built in alarm to warn against
dangerous CO2 levels. The permanent mounted CO2-200 Air
Quality meter is designed to measure air quality compliance in
critical environment controlled areas such as laboratories and
production.
CO2-200
n Low drift wall mounted meter for monitoring indoor air
quality
n CO2 Measurement up to 9999 ppm, Temperature, Relative
humidity, Dew Point and Wet Bulb
n Super-Large LCD display with CO2 reading
n High performance low drift sensor designed with NDIR
(Non-Dispersive Infrared) waveguide technology with
automatic background calibration
n Audible alarm threshold setting to setup warning against
carbon dioxide level with output drive relay to control air
flow system
n Optional PC download capabilities (USB interface)
n Data Hold
n Recording of Maximum, Minimum and Average values with
recall function
Amprobe® Test Tools www.Amprobe.com
Data Sheet
Specifications
Measuring Range CO2 0 ~ 9999 ppm
2001 ~ 9999 ppm (out of scale range)
Resolution 1ppm - CO2 concentration, 0.1°C / °F - Temp, 0.1% RH - Humidity
Accuracy ±75ppm±5% of reading (0 ~ 2000 ppm) Others range accuracy are not specified
Temperature ±0.6°C / ±0.9°F
Temp. Range -10°C to 60°C (14°F to 140°F)
RH Range 0% ~ 95%
Accuracy ±3% RH (at25°C, 10-90%) others ±5% for other RH range
DP (Dew Point Temp.) -20°C to 59.9°C (-4°F to 139.8°F)
WB (Wet Bulb Temp.) -5.0°C to 59.9°C (23°F to 139.8°F)
Warm-up Time 30 seconds
Response Time About 30 seconds
Current Consumption < 50mA average, < 310mA peak current ( ~55ms)
Operating Condition 0 ~ 50°C (32°F to 122°F), 0 ~ 95% RH (avoid condensation) for CO2
Dimension 130(L) x 85(W) x 60(H) mm (5.1 x 3.3 x 2.4 in)
Storage condition -20°C to 60°C (-4°F to 140°F), 0~99%RH (avoid condensation)
Power Supply 12 VDC adaptor
Standard packing includes Meter, Manual, Power adapter 100-240vac
Weight Approx. 193g (0.43 lb)
CO2-200 CO2 Wall-Mounted Meter
Amprobe® Test Tools
website: www.Amprobe.com
email: info@amprobe.com
Everett, WA 98203
Tel: 877-AMPROBE
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
©2009 Amprobe Test Tools. All rights reserved.
7/2009 3520597 Rev A
