Product data sheet Subminiature connectors Product description Snap-In IP40 male cable connector, Contacts: 4, 2.5 - 4.0 mm, unshielded, solder, IP40 Area Order number Snap-In IP40 series 719 09 9767 70 04 Illustration Scale drawing Contact arrangement (Plug-in side) You can find the component part drawing on the next page. Technical data General features Order number Connector design Version Connector locking system Termination Degree of protection Cross-sectional area Cable outlet Temperature range from/to Mechanical operation Weight (g) Customs tariff number Classifications 09 9767 70 04 male cable connector connector male straight snap solder IP40 0.25 mm / AWG 24 2.5 - 4.0 mm -25 C / 70 C > 100 Mating cycles 1.28 85369010 eCl@ss 11.1 ETIM 7.0 27-44-01-09 EC003569 Declarations of conformity Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991) Electrical parameters Rated voltage Rated impulse voltage Rated current (40 C) Insulation resistance Pollution degree Overvoltage category Insulating material group EMC compliance 60 V 800 V 3A 10 1 II III unshielded Material Housing material Contact body material Contact material Contact plating REACH SVHC PA PA CuZn (brass) Au (gold) CAS 7439-92-1 (Lead) Date: 2021-03-15 - Page 1 of 3 Product data sheet Subminiature connectors Product description Snap-In IP40 male cable connector, Contacts: 4, 2.5 - 4.0 mm, unshielded, solder, IP40 Area Order number Snap-In IP40 series 719 09 9767 70 04 Component part drawing Date: 2021-03-15 - Page 2 of 3 Powered by TCPDF (www.tcpdf.org) Product data sheet Subminiature connectors Product description Snap-In IP40 male cable connector, Contacts: 4, 2.5 - 4.0 mm, unshielded, solder, IP40 Area Order number Snap-In IP40 series 719 09 9767 70 04 Security notices The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. Date: 2021-03-15 - Page 3 of 3