Technical Data Sheet 3.68*6.22mm Rectangular Legend LED Lamps 1003UYD/S530-A3/F14-9/S1339 Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially designed for applications requiring higher brightness The led lamps are available with different colors, intensities. Applications : TV set Monitor Telephone Computer PART NO. Material Emitted Color Lens Color 1003UYD/S530-A3/F14-9/S1339 AlGaInP Brilliant Yellow Yellow Diffused EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: Device Number : Prepared date: 2010/4/2 Prepared by: DLE-0002443 DR000017048 2 Page: 1 of 6 Li ming Technical Data Sheet 3.68*6.22mm Rectangular Legend LED Lamps 1003UYD/S530-A3/F14-9/S1339 Package Dimensions Notes: 1. All dimensions are in millimetres 2. The height of flange must be less than 1.5mm(0.059"). 3. Without special declared,the tolerance is 0.25mm. Absolute Maximum Ratings at Ta = 25 Parameter Symbol Rating Unit Forward Current IF 25 mA Operating Temperature Topr -40 to +85 Storage Temperature Tstg -40 to +100 Soldering Temperature Tsol 260 Electrostatic Discharge ESD 2000 V Power Dissipation Pd 60 mW Peak Forward Current IF(Peak) 60 mA Reverse Voltage VR 5 V Note: *1:Soldering time 5 seconds. EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Device Number : Prepared date: DLE-0002443 2010/4/2 Rev.: 2 Page: 2 of 6 Prepared by: Li ming Technical Data Sheet 3.68*6.22mm Rectangular Legend LED Lamps 1003UYD/S530-A3/F14-9/S1339 Electro-Optical Characteristics (Ta=25) Parameter Symbol Condition Forward Voltage VF IF= 20 Reverse Current IR VR= Luminous Intensity Iv Viewing Angle Min. Typ. Max. Unit mA 2.0 2.4 V 5 V 10 A IF= 20 mA 16 32 mcd 21/2 IF= 20 mA 110 deg Peak Wavelength p IF= 20 mA 591 nm Dominant Wavelength d IF= 20 mA 589 nm Spectrum Radiation Bandwidth IF= 20 mA 15 nm EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Device Number :DLE-0002443 Prepared date: 2010/4/2 Rev.: 2 Prepared by: Li ming Page: 3 of 6 Technical Data Sheet 3.68*6.22mm Rectangular Legend LED Lamps 1003UYD/S530-A3/F14-9/S1339 Typical Electro-Optical Characteristic Curves: EVERLIGHT ELECTRONICS CO.,LTD. Device Number : DLE-0002443 http : //www.everlight.com Prepared date: 2010/4/2 Rev.: Prepared by: 2 Page: 4 of 6 Li ming Technical Data Sheet 3.68*6.22mm Rectangular Legend LED Lamps 1003UYD/S530-A3/F14-9/S1339 Reliability test items and conditions: The reliability of products shall be satisfied with items listed below. Confidence level97% LTPD3% NO Item Test Conditions Test Hours/Cycle 1 Solder Heat TEMP : 260 5 10 SEC Failure Judgment Criteria Ac/Re Sample Size 76 PCS 0/1 76 PCS 0/1 76 PCS 0/1 H : +100 15min 5 min 300 CYCLES L : -40 15min H : +100 5min 10 sec 300 CYCLES L : -10 5min 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage TEMP : 100 1000 HRS 76 PCS 5 Low Temperature Storage TEMP : -40 1000 HRS 76 PCS 0/1 6 DC Operating Life 1000 HRS 76 PCS 0/1 7 High Temperature / High Humidity 1000 HRS 76 PCS 0/1 TEMP : 25 IF = 20mA 85 / 85% RH IvIvt*0.5 or VfU or VfL NoteIvtTo test Iv value of the chip before the reliablility test IvThe test value of the chip that has completed the reliablility test UUpper Specification Limit L Lower Specification Limit EVERLIGHT ELECTRONICS CO.,L Device Number : DLE-0002443 http : //www.everlight.com Prepared date: 2010/4/2 Rev.: 2 Prepared by: Page: 5 of 6 Li ming 0/1 Technical Data Sheet 3.68*6.22mm Rectangular Legend LED Lamps 1003UYD/S530-A3/F14-9/S1339 Packing Quantity Specification 1.500PCS/1Bag5Bags/1Box 2.10Boxes/1Carton Label Form Specification Pb EVERLIGHT CPN: Customer's Production Number X P/N : Production Number QTY: Packing Quantity RoHS CAT: Ranks 1003UYD/S530-A3/F14-9/S1339 HUE: Dominant Wavelength REF: Reference LOT No: Lot Number Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporatio Please dont reproduce or cause anyone to reproduce them without EVERLIGHTsconsent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Device Number : Prepared date: DLE-0002443 2010/4/2 Rev.: 2 Prepared by: Page: 6 of 6 Li ming Technical Data Sheet 3.68*6.22mm Rectangular Legend LED Lamps 1003UYD/S530-A3/F14-9/S1339 Soldering Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to epoxy bulb, and soldering beyond the base of the tie bar is recommended. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 300 Max. (30W Max.) Preheat temp. 100 Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. & time 260 Max., 5 sec Max Distance 3mm Min.(From solder joint to epoxy bulb) Distance 3mm Min. (From solder joint to epoxy bulb) laminar wave Fluxing Prehead Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Dip and hand soldering should not be done more than one time After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until the LEDs return to room temperature. A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature. Although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the LEDs. Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave.