12 11 10 9 7 8 5 6 4 3 2 1 NOTES: 1. HOUSING MAT'L.: POLYESTER, UNFILLED, 94V-0. COLOR: BLACK. TERMINAL MATERIAL: BRASS ALLOY 2. PLATINGS: 1 = .000035/(.00090) MIN. REFLOWED MATTE TIN OVER .000020/(.00050) MIN. COPPER (PREPLATE) (FINISH IS BRIGHT IN APPEARANCE, THICKNESS AS APPLIED PRIOR TO REFLOW) 2 = .000030/(.00076) MIN. SELECT GOLD AND .000100/(.00254) MIN. SELECT MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. 3 = .000100/(.00254) MIN. MATTE TIN OVER .000050/(.00127) MIN. NICKEL 3. PRODUCT SPECIFICATION PS-5556-003 4. PACKAGING SPECIFICATION: BULK PER PK-30069-001 TRAY PER 300690000-PK 5 PART IS DESIGNED FOR USE WITH #4 OR M3 SELF TAPPING SCREWS. 6. PART MATES WITH RECEPTACLE 30067-*. 7. THIS PART CONFORMS TO CLASS 'B' REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. H .016 0.40 .012 0.30 G .004 "C" 0.10 H G LAST CIRCUIT F F LAST CIRCUIT "A" CIRCUIT 1 E E 5 PCB LAYOUT FOR 2-16 CIRCUIT PARTS WITH FLANGES D "E" D .004 0.10 LAST CIRCUIT C C E "A" CIRCUIT 1 LAST CIRCUIT PCB LAYOUT FOR 2-16 CIRCUIT PARTS B SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 2:1 = 0 A MM 3 PLACES DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2018/04/13 10 22:56:46 9 8 7 6 C 0.25 0.014 0.36 1 PLACE = 0 0 PLACES = 0 0.01 2 PLACES ANGULAR TOL THIS DRAWING REPLACES DRAWING SDA-30069-++++ INCH 4 PLACES = 0 = 0 CURRENT REV DESC: INITIAL RELEASE GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 B 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 173061 DRWN: AZAHIROVIC CHK'D: JBELL APPR: FSMITH INITIAL REVISION: DRWN: FJR APPR: FSMITH THIRD ANGLE PROJECTION 4 2018/02/26 2018/04/06 2018/04/13 MINI-FIT T.P.A. VERTICAL HEADER ASSEMBLY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1991/19/09 2012/03/08 DRAWING SERIES C-SIZE 30069 3 300690000-SD MATERIAL NUMBER PSD 000 CUSTOMER SEE CHARTS 2 A SHEET NUMBER GENERAL MARKET 1 OF 3 1 A 12 11 10 9 ENG. NO. EDP. NO. 2 A-30069-02C1 15-97-7023 4 A-30069-04C1 DIM. "A" DIM. "B" DIM. "E" DIM. "D" PACKAGING H 6 8 A-30069-08C1 10 A-30069-10C1 G 12 A-30069-12C1 14 A-30069-14C1 16 A-30069-16C1 5 6 4 3 2 1 GOLD-PLATED ASSEMBLIES WITH PEGS TIN-PLATED ASSEMBLIES WITH PEGS CKT. SIZE 7 8 ----- .165 (4.20) .331 (8.40) .496 15-97-7083 (12.60) .661 15-97-7103 (16.80) .827 15-97-7123 (21.00) .992 NOT TOOLED (25.20) 1.157 NOT TOOLED (29.40) 15-97-7043 .213 (5.40) .378 (9.60) .543 (13.80) .709 (18.00) .874 (22.20) 1.039 (26.40) 1.205 (30.60) 1.370 (34.80) .370 (9.40) .535 (13.60) .701 (17.80) .866 (22.00) 1.031 (26.20) 1.197 (30.40) 1.362 (34.60) 1.528 (38.80) ENG. NO. ----- BULK ----- BULK ----- BULK ----- BULK A-30069-08C2 ----- BULK A-30069-10C2 EDP. NO. DIM. "A" DIM. "B" DIM. "E" DIM. "D" PACKAGING .213 (5.40) .378 (9.60) .543 (13.80) .709 (18.00) .874 (22.20) 1.039 (26.40) 1.205 (30.60) 1.370 (34.80) ----- A-30069-04C2 ----- BULK A-30069-12C2 ----- BULK A-30069-14C2 ----- BULK A-30069-16C2 .165 (4.20) .331 (8.40) .496 15-97-7085 (12.60) .661 15-97-7105 (16.80) .827 15-97-7125 (21.00) .992 NOT TOOLED (25.20) 1.157 15-97-7165 (29.40) 15-97-7045 .370 (9.40) .535 (13.60) .701 (17.80) .866 (22.00) 1.031 (26.20) 1.197 (30.40) 1.362 (34.60) 1.528 (38.80) ----- BULK ----- BULK ----- BULK ----- BULK ----- TRAY H G ----- TRAY ----- TRAY ----- TRAY LEGEND A - 30069 - ** * * F F CIRCUIT SIZE (2 - 16) TIN-PLATED ASSEMBLIES WITH FLANGES E CKT. SIZE D C ENG. NO. EDP. NO. 2 A-30069-02A1 15-97-7022 4 A-30069-04A1 6 A-30069-06A1 8 A-30069-08A1 10 A-30069-10A1 12 A-30069-12A1 14 A-30069-14A1 16 A-30069-16A1 GOLD-PLATED ASSEMBLIES WITH FLANGES DIM. "A" DIM. "B" DIM. "C" DIM. "D" PACKAGING ----- .165 (4.20) .331 15-97-7062 (8.40) .496 15-97-7082 (12.60) .661 15-97-7102 (16.80) .827 15-97-7122 (21.00) .992 NOT TOOLED (25.20) 1.157 15-97-7162 (29.40) 15-97-7042 HOUSING STYLE A = FLANGES C = PEGS .213 (5.40) .378 (9.60) .543 (13.80) .709 (18.00) .874 (22.20) 1.039 (26.40) 1.205 (30.60) 1.370 (34.80) .354 (9.00) .520 (13.20) .685 (17.40) .850 (21.60) 1.016 (25.80) 1.181 (30.00) 1.346 (34.20) 1.512 (38.40) .606 (15.40) .772 (19.60) .937 (23.80) 1.102 (28.00) 1.268 (32.20) 1.433 (36.40) 1.598 (40.60) 1.764 (44.80) ENG. NO. EDP. NO. BULK A-30069-02A2 15-97-7024 BULK A-30069-04A2 BULK A-30069-06A2 BULK A-30069-08A2 BULK A-30069-10A2 BULK A-30069-12A2 BULK A-30069-14A2 BULK A-30069-16A2 DIM. "A" DIM. "B" DIM. "C" DIM. "D" PACKAGING .213 (5.40) .378 (9.60) .543 (13.80) .709 (18.00) .874 (22.20) 1.039 (26.40) 1.205 (30.60) 1.370 (34.80) ----- .165 (4.20) .331 15-97-7064 (8.40) .496 15-97-7084 (12.60) .661 15-97-7104 (16.80) .827 15-97-7124 (21.00) .992 NOT TOOLED (25.20) 1.157 15-97-7164 (29.40) 15-97-7044 .354 (9.00) .520 (13.20) .685 (17.40) .850 (21.60) 1.016 (25.80) 1.181 (30.00) 1.346 (34.20) 1.512 (38.40) .606 (15.40) .772 (19.60) .937 (23.80) 1.102 (28.00) 1.268 (32.20) 1.433 (36.40) 1.598 (40.60) 1.764 (44.80) E PLATING 1 = TIN OVER COPPER 2 = GOLD OVER NICKEL 3 = MATTE TIN OVER NICKEL BULK BULK BULK TRAY D BULK BULK BULK BULK C B B SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 = 0 A MM 3 PLACES DOCUMENT STATUS 12 P1 RELEASE DATE 11 2018/04/13 10 22:56:46 9 THIS DRAWING REPLACES DRAWING SDA-30069-++++ 7 8 6 C 0.25 0.014 0.36 1 PLACE = 0 0 PLACES = 0 0.01 2 PLACES ANGULAR TOL FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 INCH 4 PLACES = 0 = 0 CURRENT REV DESC: INITIAL RELEASE 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 173061 DRWN: AZAHIROVIC CHK'D: JBELL APPR: FSMITH INITIAL REVISION: DRWN: FJR APPR: FSMITH THIRD ANGLE PROJECTION 4 2018/02/26 2018/04/06 2018/04/13 MINI-FIT T.P.A. VERTICAL HEADER ASSEMBLY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1991/19/09 2012/03/08 DRAWING SERIES C-SIZE 30069 3 300690000-SD MATERIAL NUMBER PSD 000 CUSTOMER SEE CHARTS 2 A SHEET NUMBER GENERAL MARKET 2 OF 3 1 A 12 11 10 9 8 7 5 6 4 3 2 1 MATTE TIN-PLATED ASSEMBLIES WITH PEGS CKT. SIZE MATERIAL NUMBER DIM. "A" DIM. "B" DIM. "E" DIM. "D" PACKAGING H 2 30069-0233 4 30069-0433 6 8 30069-0833 10 30069-1033 G 12 30069-1233 14 NOT TOOLED 16 30069-1633 ----.165 (4.20) .331 (8.40) .496 (12.60) .661 (16.80) .827 (21.00) .992 (25.20) 1.157 (29.40) .213 (5.40) .378 (9.60) .543 (13.80) .709 (18.00) .874 (22.20) 1.039 (26.40) 1.205 (30.60) 1.370 (34.80) .370 (9.40) .535 (13.60) .701 (17.80) .866 (22.00) 1.031 (26.20) 1.197 (30.40) 1.362 (34.60) 1.528 (38.80) ----- TRAY ----- TRAY ----- TRAY ----- TRAY ----- TRAY H G ----- TRAY ----- TRAY C .012 0.30 F MATTE TIN-PLATED ASSEMBLIES WITH FLANGES 2 D C 30069-0213 4 30069-0413 6 30069-0613 8 30069-0813 10 30069-1013 12 30069-1213 14 NOT TOOLED 16 30069-1613 ----.165 (4.20) .331 (8.40) .496 (12.60) .661 (16.80) .827 (21.00) .992 (25.20) 1.157 (29.40) .213 (5.40) .378 (9.60) .543 (13.80) .709 (18.00) .874 (22.20) 1.039 (26.40) 1.205 (30.60) 1.370 (34.80) .354 (9.00) .520 (13.20) .685 (17.40) .850 (21.60) 1.016 (25.80) 1.181 (30.00) 1.346 (34.20) 1.512 (38.40) A REF B TRAY C .012 0.30 D .016 0.40 TRAY TRAY C .012 0.30 D .016 0.40 A REF A REF B B C .012 0.30 D .016 0.40 C .012 0.30 D .016 0.40 F E DIM. "D" PACKAGING .606 (15.40) .772 (19.60) .937 (23.80) 1.102 (28.00) 1.268 (32.20) 1.433 (36.40) 1.598 (40.60) 1.764 (44.80) B C .012 0.30 D .016 0.40 D .016 0.40 E CKT. SIZE MATERIAL NUMBER DIM. "A" DIM. "B" DIM. "C" A REF B TRAY ----- A REF B FINISHED PART LEGEND TRAY D TRAY 30069 - ** * * TRAY TRAY A REF TRAY B PLATING 3 = MATTE TIN OVER NICKEL PART SERIES C HOUSING STYLE 1 = FLANGES 3 = PEGS C .012 0.30 D.016 0.40 CIRCUIT SIZE (2 - 16) B SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 1:1 = 0 A MM 3 PLACES DOCUMENT STATUS 12 P1 RELEASE DATE 11 2018/04/13 10 THIS DRAWING REPLACES DRAWING SDA-30069-++++ 22:56:46 9 8 7 6 C 0.25 0.014 0.36 1 PLACE = 0 0 PLACES = 0 0.01 2 PLACES ANGULAR TOL FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 INCH 4 PLACES = 0 = 0 CURRENT REV DESC: INITIAL RELEASE GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 B 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 173061 DRWN: AZAHIROVIC CHK'D: JBELL APPR: FSMITH INITIAL REVISION: DRWN: FJR APPR: FSMITH THIRD ANGLE PROJECTION 4 2018/02/26 2018/04/06 2018/04/13 MINI-FIT T.P.A. VERTICAL HEADER ASSEMBLY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1991/19/09 2012/03/08 DRAWING SERIES C-SIZE 30069 3 300690000-SD MATERIAL NUMBER PSD 000 CUSTOMER SEE CHARTS 2 A SHEET NUMBER GENERAL MARKET 3 OF 3 1 A