NJG1519KC1
- 1 -
SP4T SWITCH GaAs MMIC
nGENERAL DESCRIPTION nPACKAGE OUTLINE
NJG1519KC1 is a GaAs high power SP4T switch MMIC
for antenna switch of dual mode cellular phone application
such as GSM/DCS1800.
This switch is designed for an antenna switch between
an antenna and one of two Tx ports or two Rx ports to
control RF signals up to 2.5GHz.
The ultra small & ultra thin FLP10 package is applied.
nFEATURES
lLow voltage operation +2.5V min
lPin at 0.2dB compression point 36dBm typ. @f=1.9GHz, VCTL=3V
lLow insertion loss 0.55dB typ. @f=0.9GHz, PIN=34dBm, VCTL=3V
0.80dB typ. @f=1.9GHz, PIN=32dBm, VCTL=3V
lHigh isolation 24dB typ. @f=0.9GHz, VCTL=3V
18dB typ. @f=1.9GHz, VCTL=3V
lLow control current 30uA typ. @f=0.9GHz, PIN=34dBm, VCTL=3V
lUltra small & ultra thin package FLP10-C1 (Mount Size: 2.8x3.0x0.75mm)
nPIN CONFIGURATION
nTRUTH TABLE
NJG1519KC1
ON Pass
V
CTL1
V
CTL2
V
CTL3
V
CTL4
PC-P1
H
L
L
L
PC-P2
L
H
L
L
PC-P3
L
L
H
L
PC-P4
L
L
L
H
NOTE: Please note that any information on this catalog will be subject to change.
KC1Type
(Top View)
Pin connection
1. P1
2. VCTL1
3. GND
4. VCTL2
5. P2
6. P3
7. VCTL3
8. PC
9. VCTL4
10. P4
Orientation Mark
1
2
3
4
5
6
7
8
9
10
NJG1519KC1
- 2 -
nABSOLUTE MAXIMUM RATINGS (Ta=+25°C, Zs=Zl=50Ω)
PARAMETER SYMBOL
CONDITIONS RATINGS
UNITS
RF Input Power PIN VCTL(L)=0V, VCTL(H)=3V 38 dBm
Operating Voltage VCTL VCTL(H)-VCTL(L) 12 V
Power Dissipation PD 550 mW
Operating Temp. Topr -40~+85 °C
Storage Tempe. Tstg -55~+125
°C
nELECTRICAL CHARACTERISTICS
(General conditions: Ta=+25°C, Zs=Zl=50Ω, VCTL (L)=0V, VCTL (H)=3V)
PARAMETER SYMBOL
CONDITIONS MIN TYP MAX UNITS
Control Voltage (Low) VCTL(L) f=0.01~2.5GHz -0.2 0 0.2 V
Control Voltage (High) VCTL(H) f=0.01~2.5GHz 2.5 3.0 6.5 V
Control Current ICTL f=0.9GHz, PIN=34dBm - 30 50 uA
Insertion loss 1 LOSS1 f=0.9GHz, PIN=34dBm - 0.55 0.75 dB
Insertion loss 2 LOSS2 f=1.9GHz, PIN=32dBm - 0.80 0.95 dB
Isolation 1 ISL1 f=0.9GHz, PIN=34dBm 22 24 - dB
Isolation 2 ISL2 f=1.9GHz, PIN=32dBm 16 18 - dB
Pin at 0.2dB
Compression point P-0.2dB f=1.9GHz 34 36 - dBm
VSWR VSWRi on-state ports, f=1.9GHz - 1.4 1.6
Switching time TSW f=0.1~2.5GHz - 60 100 ns
NJG1519KC1
- 3 -
nTERMINAL INFORMATION
No. SYMBOL EXPLANATION
1 P1 RF port. This terminal is connected under the condition of
2pin-VCTL(H) (+2.5~+6.5V), 4, 7, 9pin-VCTL(L) (-0.2~+0.2V).
A DC cut capacitor 56pF is reguired at this terminal to block DC
voltage of inner circuit.
2 VCTL1 Control port1. Please connect bypass capacitor (10pF) between this
terminal and GND close to this IC.
3 GND Ground terminal. Please connect this terminal with ground plane as
close as possible for excellent RF performance.
4 VCTL2 Control port2. Please connect bypass capacitor (10pF) between this
terminal and GND close to this IC.
5 P2 RF port. This terminal is connected under the condition of
4pin-VCTL(H) (+2.5~+6.5V), 2, 7, 9pin-VCTL(L) (-0.2~+0.2V).
A DC cut capacitor 56pF is reguired at this terminal to block DC
voltage of inner circuit.
6 P3 RF port. This terminal is connected under the condition of
7pin-VCTL(H) (+2.5~+6.5V), 2, 4, 9pin-VCTL(L) (-0.2~+0.2V).
A DC cut capacitor 56pF is reguired at this terminal to block DC
voltage of inner circuit.
7 VCTL3 Control port3. Please connect bypass capacitor (10pF) between this
terminal and GND close to this IC.
8 PC
Common RF port. This terminal is connected by the control voltage
supplied to each control terminal (VCTL1~VCTL4 terminal). Please
see the description of each terminal. A DC cut capacitor (56pF) is
reguired at this terminal to block DC voltage of inner circuit.
This terminal and GND are connected by high resistance (200KΩ) to
avoid unexpected signal output that is possibly generated right after
burst signal switching.
9 VCTL4 Control port4. Please connect bypass capacitor (10pF) between this
terminal and GND close to this IC.
10 P4 RF port. This terminal is connected under the condition of
9pin-VCTL(H) (+2.5~+6.5V), 2, 4, 7pin-VCTL(L) (-0.2~+0.2V).
A DC cut capacitor 56pF is reguired at this terminal to block DC
voltage of inner circuit.
NJG1519KC1
- 4 -
nELECTRICAL CHARACTERISTICS
(f=100MHz~3.0GHz, with application circuit, losses of external circuit are excluded)
-2.0
-1.5
-1.0
-0.5
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 Insertion Loss vs. Frequency
Insertion Loss (dB)
Frequency (GHz)
( VCTL(H)=3.0V, VCTL(L)=0V )
-2.0
-1.5
-1.0
-0.5
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P4 Insertion Loss vs. Frequency
Insertion Loss (dB)
Frequency (GHz)
( VCTL(H)=3.0V, VCTL(L)=0V )
1.0
1.2
1.4
1.6
1.8
2.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
VSWR(P1) vs. Frequency
VSWR
Frequency (GHz)
(PC-P1 ON, VCTL(H)=3.0V ,VCTL(L)=0V)
1.0
1.2
1.4
1.6
1.8
2.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
VSWR(P4) vs. Frequency
VSWR
Frequency (GHz)
(PC-P4 ON, VCTL(H)=3.0V ,VCTL(L)=0V)
NJG1519KC1
- 5 -
nELECTRICAL CHARACTERISTICS
(f=100MHz~3.0GHz, with application circuit, losses of external circuit are excluded)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P1 Isolation vs. Frequency
Isolation (dB)
Frequency (GHz)
(PC-P2 ON, VCTL(H)=3.0V ,VCTL(L)=0V)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P2 Isolation vs. Frequency
Isolation (dB)
Frequency (GHz)
(PC-P3 ON, VCTL(H)=3.0V ,VCTL(L)=0V)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P3 Isolation vs. Frequency
Isolation (dB)
Frequency (GHz)
(PC-P4 ON, VCTL(H)=3.0V ,VCTL(L)=0V)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0
PC-P4 Isolation vs. Frequency
Isolation (dB)
Frequency (GHz)
(PC-P1 ON, VCTL(H)=3.0V ,VCTL(L)=0V)
NJG1519KC1
- 6 -
nELECTRICAL CHARACTERISTICS
(f=900MHz, with application circuit, losses of PCB, connector and DC blocking capacitor are excluded)
20
22
24
26
28
30
32
34
36
38
0
20
40
60
80
100
120
140
160
180
20 22 24 26 28 30 32 34 36 38
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
Output Power (dBm)
Control Current (uA)
Input Power (dBm)
( PC-P1 ON, f=900MHz )
Output Power,Control Current vs. Input Power
20
22
24
26
28
30
32
34
36
38
0
20
40
60
80
100
120
140
160
180
20 22 24 26 28 30 32 34 36 38
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Output Power (dBm)
Control Current (uA)
Input Power (dBm)
( PC-P1 ON, f=900MHz )
Output Power,Control Current vs. Input Power
-2.0
-1.5
-1.0
-0.5
0.0
20 22 24 26 28 30 32 34 36 38
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
Insertion Loss (dB)
Input Power (dBm)
( PC-P1 ON, f=900MHz )
Insertion Loss vs. Input Power
-2.0
-1.5
-1.0
-0.5
0.0
20 22 24 26 28 30 32 34 36 38
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Insertion Loss (dB)
Input Power (dBm)
( PC-P1 ON, f=900MHz )
Insertion Loss vs. Input Power
NJG1519KC1
- 7 -
nELECTRICAL CHARACTERISTICS
(f=900MHz, with application circuit, losses of PCB, connector and DC blocking capacitor are excluded)
nELECTRICAL CHARACTERISTICS
(f=1.9GHz, with application circuit, losses of PCB, connector and DC blocking capacitor are excluded)
-30
-25
-20
-15
-10
-5
0
20 22 24 26 28 30 32 34 36 38
PC-P1 Isolation vs. Input Power
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
Isolation (dB)
Input Power (dBm)
( PC-P4 ON, f=900MHz )
-30
-25
-20
-15
-10
20 22 24 26 28 30 32 34 36 38
PC-P1 Isolation vs. Input Power
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Input Power (dBm)
( PC-P4 ON , f=900MHz )
20
22
24
26
28
30
32
34
36
38
0
20
40
60
80
100
120
140
160
180
20 22 24 26 28 30 32 34 36 38
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
Output Power (dBm)
Control Current (uA)
Input Power (dBm)
( PC-P1 ON, f=1.9GHz )
Output Power,Control Current vs. Input Power
20
22
24
26
28
30
32
34
36
38
0
20
40
60
80
100
120
140
160
180
20 22 24 26 28 30 32 34 36 38
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Output Power (dBm)
Control Current (uA)
Input Power (dBm)
( PC-P1 ON, f=1.9GHz )
Output Power,Control Current vs. Input Power
NJG1519KC1
- 8 -
nELECTRICAL CHARACTERISTICS
(f=1.9GHz, with application circuit, losses of PCB, connector and DC blocking capacitor are excluded)
-2.0
-1.5
-1.0
-0.5
0.0
20 22 24 26 28 30 32 34 36 38
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
Insertion Loss (dB)
Input Power (dBm)
( PC-P1 ON, f=1.9GHz )
Insertion Loss vs. Input Power
-2.0
-1.5
-1.0
-0.5
0.0
20 22 24 26 28 30 32 34 36 38
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Insertion Loss (dB)
Input Power (dBm)
( PC-P1 ON, f=1.9GHz )
Insertion Loss vs. Input Power
-25
-20
-15
-10
-5
0
20 22 24 26 28 30 32 34 36 38
PC-P1 Isolation vs. Input Power
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
Isolation (dB)
Input Power (dBm)
( PC-P4 ON, f=1.9GHz )
-25
-20
-15
-10
-5
0
20 22 24 26 28 30 32 34 36 38
PC-P1 Isolation vs. Input Power
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Input Power (dBm)
( PC-P4 ON, f=1.9GHz )
NJG1519KC1
- 9 -
nELECTRICAL CHARACTERISTICS (with application circuit)
-85
-80
-75
-70
-65
-60
-55
-50
26 28 30 32 34 36
2nd Harmonics vs. Input Power
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
2nd Harmonics (dBc)
Input Power (dBm)
(PC-P1 ON ,f=900MHz)
Input 2fo Level=-90dBc -85
-80
-75
-70
-65
-60
-55
-50
26 28 30 32 34 36
2nd Harmonics vs. Input Power
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
2nd Harmonics (dBc)
Input Power (dBm)
(PC-P1 ON ,f=1.9GHz)
Input 2fo Level=-90dBc
-100
-90
-80
-70
-60
-50
-40
-30
26 28 30 32 34 36
3rd Harmonics vs. Input Power
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
3rd Harmonics (dBc)
Input Power (dBm)
(PC-P1 ON ,f=900MHz)
Input 3fo Level=-110dBc -100
-90
-80
-70
-60
-50
-40
-30
26 28 30 32 34 36
3rd Harmonics vs. Input Power
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
3rd Harmonics (dBc)
Input Power (dBm)
(PC-P1 ON ,f=1.9GHz)
Input 3fo Level=-110dBc
NJG1519KC1
- 10 -
nELECTRICAL CHARACTERISTICS (with application circuit)
Switching speed
(VCTL1=3.0V, VCTL2=0V)
1.2V
-800mV
200mV
/div
trlg’d
-94ns
406ns
50ns/div
80nsec
NJG1519KC1
- 11 -
nTEMPERATURE CHARACTERISTICS (with application circuit)
-2.0
-1.5
-1.0
-0.5
0.0
-50 0 50 100
Insertion Loss vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Insertion Loss (dB)
Ambient Temperature (oC)
( PC-P1 ON ,f=900MHz ,Pin=34dBm )
0
20
40
60
80
100
120
-50 0 50 100
Control Current vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Control Current (uA)
Ambient Temperature (oC)
( PC-P1 ON , f=900MHz ,Pin=34dBm )
0
20
40
60
80
100
120
-50 0 50 100
Control Current vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Control Current (uA)
Ambient Temperature (oC)
( PC-P1 ON , f=1.9GHz ,Pin=32dBm )
-2.0
-1.5
-1.0
-0.5
0.0
-50 0 50 100
Insertion Loss vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Insertion Loss (dB)
Ambient Temperature (oC)
( PC-P1 ON ,f=1.9GHz ,Pin=32dBm )
NJG1519KC1
- 12 -
nTEMPERATURE CHARACTERISTICS (with application circuit)
-40
-35
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
PC-P1 Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Ambient Temperature (oC)
( PC-P2 ON ,f=900MHz ,Pin=34dBm )
-40
-35
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
PC-P2 Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Ambient Temperature (oC)
( PC-P3 ON ,f=900MHz ,Pin=34dBm )
-40
-35
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
PC-P3 Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Ambient Temperature (oC)
( PC-P4 ON ,f=900MHz ,Pin=34dBm )
-40
-35
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
PC-P4 Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Ambient Temperature (oC)
( PC-P1 ON ,f=900MHz ,Pin=34dBm )
NJG1519KC1
- 13 -
nTEMPERATURE CHARACTERISTICS (with application circuit)
-40
-35
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
PC-P1 Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Ambient Temperature (oC)
( PC-P2 ON ,f=1.9GHz ,Pin=32dBm )
-40
-35
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
PC-P2 Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Ambient Temperature (oC)
( PC-P3 ON ,f=1.9GHz ,Pin=32dBm )
-40
-35
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
PC-P3 Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Ambient Temperature (oC)
( PC-P4 ON ,f=1.9GHz ,Pin=32dBm )
-40
-35
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
PC-P4 Isolation vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
Isolation (dB)
Ambient Temperature (oC)
( PC-P1 ON ,f=1.9GHz ,Pin=32dBm )
NJG1519KC1
- 14 -
nTEMPERATURE CHARACTERISTICS (with application circuit)
-75
-70
-65
-60
-55
-50
-45
-50 0 50 100
2nd Harmonics vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
2nd Harmonics (dBc)
Ambient Temperature (oC)
( PC-P1 ON ,f=900MHz ,Pin=34dBm )
Input 2fo Level=-90dBc -85
-80
-75
-70
-65
-60
-55
-50 0 50 100
2nd Harmonics vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
2nd Harmonics (dBc)
Ambient Temperature (oC)
( PC-P1 ON,f=1.9GHz ,Pin=32dBm )
Input 2fo Level=-80dBc
-80
-70
-60
-50
-40
-30
-20
-50 0 50 100
3rd Harmonics vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
3rd Harmonics (dBc)
Ambient Temperature (oC)
( PC-P1 ON,f=900MHz ,Pin=34dBm )
Input 3fo Level=-115dBc -90
-80
-70
-60
-50
-40
-30
-50 0 50 100
3rd Harmonics vs. Ambient Temperature
VCTL=2.5V
VCTL=2.7V
VCTL=3.0V
VCTL=3.6V
VCTL=4.8V
VCTL=6.5V
3rd Harmonics (dBc)
Ambient Temperature (oC)
( PC-P1 ON,f=1.9GHz ,Pin=32dBm )
Input 3fo Level=-105dBc
NJG1519KC1
- 15 -
nAPPLICATION CIRCUIT
nRECOMMENDED PCB DESIGN
PRECAUTIONS
[1] The DC blocking capacitors have to be placed at RF terminal of P1, P2 and PC.
[2] Bypass capacitors (C4, C5) should be placed close to terminals of VCTL1, VCTL2 to reduce
stripline influence of RF characteristics.
[3] For good isolation, the GND terminal (2nd pin) must be placed possibly close to ground
plane of substrate, and through holes for GND should be placed near by the pin connection.
[4] To avoid degradation of isolation or high power characteristics, please layout ground
pattern right under this IC.
1
2
3
4
5
10
9
8
7
6
P1
VCTL1
VCTL2
P2
P4
VCTL4
PC
VCTL3
P3
C1
56pF
C2
56pF
C4
56pF
C3
56pF
C5
56pF
C6
10pF
C7
10pF
C9
10pF
C8
10pF
NJG1519KC1
PCB: FR
-
4, t=0.5mm
Microstrip Line Width: 1mm (Z0=50Ω)
PCB Size: 26x26mm
n
PARTS LIST
Parts Value
Notes
C1~C5 56pF MURATA (GRM36)
C6~C9 10pF MURATA (GRM36)
n
Circuit losses including losses of
capacitors and connectors
Frequency 900MHz 1.9GHz
Loss (dB) 0.20 0.36
P1 P4
P2 P3
PC
VCTL1
VCTL2
VCTL3
VCTL4
C1
C2
C3
C4
C7
C9
C8
C6
C5
NJG1519KC1
- 16 -
nPACKAGE OUTLINE (FLP10-C1)
3.0±0.1
10 6
1 5
0.20.2
2.8±0.1
2.4±0.1
0.5 0.5
0.15-0.05
+0.1
0.2-0.05
+0.1
0.1 0.1
0.75±0.05
Lead
material
:
Copper
Lead surface finish : Solder plating
Molding material : Epoxy resin
UNIT : mm
Weight : 15mg
Caution
s
on us
ing
this
product
This product contains Gallium-Arsenide (GaAs) which is a harmful material.
• Do NOT eat or put into mouth.
• Do NOT dispose in fire or break up this product.
• Do NOT chemically make gas or powder with this product.
•
To
wa
st
e
th
is
product, please obey the relati
ng
law
of
your
country.
This product may be
damaged
with electric static discharge
(ESD)
or spike voltage.
P
lease
hand
le with care to avoid these damages
.
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative
usages
of the product and not intended for the
guarantee or permission of any right including
