RPM15-2412SFW/N - RECOM Power

Features

Regulated

Converters

• Class B EMC Filter built-in

• Reverse Polarity Protected

• Inrush Current Limiting (Soft Start)

• Output Trim Potentiometer

• Output LED Indicator

• DIN Rail Mounting or Panel Mount Options

PD-1

REV.: 1/2016www.recom-power.com

DC/DC Converter

Power Module

Description

The Recom Power Module takes a standard 15W-60W converter and mounts it on a PCB with screw ter-

minals, an EMC ﬁlter, input protection circuitry and a built-in heatsink to offer a complete power module

that can be mounted on a bulkhead or on a standard DIN rail. The Power Module is primarily designed

for transport applications such as a GPS vehicle tracking power supply or a radio communications power

supply, but will also ﬁnd many uses in industrial, communications or battery-powered applications.

15-60 Watt

Single,

Dual & Triple

Outputs

Power Modules

Selection Guide Single and Dual Outputs - Panel Mount Version

Power Module Input Output Internal Converter

Part Number Range Power Fuse Series

(Bulkhead Version) [VDC] [W] (Replaceable)

RPM15-24xxS_DFW( 1,2) 9.5-36 15 T6A RP15-24xxS_DFW

RPM15-48xxS_DFW(1,2) 18-75 15 T4A RP15-48xxS_DFW

RPM20-24xxS_DFW(1,2) 9.5-36 20 T6A RP20-24xxS_DFW

RPM20-48xxS_DFW(1,2) 18-75 20 T4A RP20-48xxS_DFW

RPM30-12xxS_DE(2) 9.5-18 30 T6A RP30-12xxS_DE

RPM30-24xxS_DE(2) 18-36 30 T6A RP30-24xxS_DE

RPM30-24xxS_DEW(1,2) 10-40 30 T6A RP30-24xxS_DEW

RPM30-48xxS_DE(2) 36-75 30 T4A RP30-48xxS_DE

RPM30-48xxS_DEW(1,2) 18-75 30 T4A RP30-48xxS_DEW

RPM40-12xxS_DG(2) 9.5-18 40 T8A RP40-12xxS_DG

RPM40-24xxS_DG(2) 18-36 40 T8A RP40-24xxS_DG

RPM40-24xxS_DGW(1,2) 9.5-36 40 T8A RP40-24xxS_DGW

RPM40-48xxS_DG(2) 36-75 40 T4A RP40-48xxS_DG

RPM40-48xxS_DGW(1,2) 18-75 40 T4A RP40-48xxS_DGW

RPM60-24xxSG(1,2) 18-36 60 T8A RP60-24xxSG

RPM60-48xxSG(1,2) 36-75 60 T4A RP60-48xxSG

IEC60950-1 Certiﬁed

EN60950-1 Certiﬁed

How to use this datasheet:

1. Select the converter that suits your application from the converter series list below

2. Decide on DIN Mount (RPMD) or bulkhead (RPM) version

Ordering example: 40W, 18-75 VDC in, single 12Vout, DIN Mount = RPMD40-4812SGW

xx = Output Voltage Options Single Outputs: 3.3S = 3.3V 05S = 5V 12S = 12V 15S = 15V

Dual Outputs: 12D = ±12V 15D = ±15V

Refer to converter series datasheets for detailed information.

Notes:

Note1: add „/N“ for Negative CTRL Logic

Note2: no sufﬁx for Positive CTRL Logic

PD-2 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Power Module

Series

Selection Guide Triple Outputs - Panel Mount Version

Power Module Input Output Internal Converter

Part Number Range Power Fuse Series

(Bulkhead Version) [VDC] [W] (Replaceable)

RPM40-120512TG(2) 9.5-18 40 T8A RP40-120512TG

RPM40-120515TG(2) 9.5-18 40 T8A RP40-120515TG

RPM40-240512TG(2) 18-36 40 T8A RP40-240512TG

RPM40-240515TG(2) 18-36 40 T8A RP40-240515TG

RPM40-480512TG(2) 36-75 40 T4A RP40-480512TG

RPM40-480515TG(2) 36-75 40 T4A RP40-480515TG

Selection Guide Triple Outputs - DIN Rail Version

Power Module Input Output Internal Converter

Part Number Range Power Fuse Series

(Bulkhead Version) [VDC] [W] (Replaceable)

RPMD40-120512TG(2) 9.5-18 40 T8A RP40-120512TG

RPMD40-120515TG(2) 9.5-18 40 T8A RP40-120515TG

RPMD40-240512TG(2) 18-36 40 T8A RP40-240512TG

RPMD40-240515TG(2) 18-36 40 T8A RP40-240515TG

RPMD40-480512TG(2) 36-75 40 T4A RP40-480512TG

RPMD40-480515TG(2) 36-75 40 T4A RP40-480515TG

Notes:

Note2: no sufﬁx for Positive CTRL Logic

Notes:

Note2: no sufﬁx for Positive CTRL Logic

Selection Guide Single and Dual Outputs - DIN Rail Version

Power Module Input Output Internal Converter

Part Number Range Power Fuse Series

(DIN rail Version) [VDC] [W] (Replaceable)

RPMD15-24xxS_DFW(1,2) 9.5-36 15 T6A RP15-24xxS_DFW

RPMD15-48xxS_DFW(1,2) 18-75 15 T4A RP15-48xxS_DFW

RPMD20-24xxS_DFW(1,2) 9.5-36 20 T6A RP20-24xxS_DFW

RPMD20-48xxS_DFW(1,2) 18-75 20 T4A RP20-48xxS_DFW

RPMD30-12xxS_DE(2) 9.5-18 30 T6A RP30-12xxS_DE

RPMD30-24xxS_DE(2) 18-36 30 T6A RP30-24xxS_DE

RPMD30-48xxS_DE(2) 36-75 30 T4A RP30-48xxS_DE

RPMD30-24xxS_DEW(1,2) 10-40 30 T6A RP30-24xxS_DEW

RPMD30-48xxS_DEW(1,2) 18-75 30 T4A RP30-48xxS_DEW

RPMD40-12xxS_DG(2) 9.5-18 40 T8A RP40-12xxS_DG

RPMD40-24xxS_DG(2) 18-36 40 T8A RP40-24xxS_DG

RPMD40-24xxS_DGW(1,2) 9.5-36 40 T8A RP40-24xxS_DGW

RPMD40-48xxS_DG(2) 36-75 40 T4A RP40-48xxS_DG

RPMD40-48xxS_DGW(1,2) 18-75 40 T4A RP40-48xxS_DGW

RPMD60-24xxSG(1,2) 18-36 60 T8A RP60-24xxSG

RPMD60-48xxSG(1,2) 36-75 60 T4A RP60-48xxSG

Notes:

Note1: add „/N“ for Negative CTRL Logic

Note2: no sufﬁx for Positive CTRL Logic

DIMENSIONS and PHYSICAL CHARACTERISTICS

Parameter Type Value

Material Chassis Aluminium

Package Dimensions (LxWxH) 101.6 x 57.15 x 19.0mm

Package Weight 134g

Connectors Screw Terminal

DC/DC Converter

Power Module

Series

PD-3

REV.: 1/2016www.recom-power.com

Notes:

Note3: Trim option depending on converter series, please check datasheet of the converter series

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Inrush current nominal Vin and full load soft start

Start-up time Power up

CTRL Pin

100ms

20ms

Bulkhead Version

ENVIRONMENTAL

Parameter

Condition

Value

Thermal Impedance 8.5°C/Watt

SAFETY AND CERTIFICATIONS

IEC General Safety

EN General Safety LVD20110124 IEC60950-1, 2nd Edition, 2005 + A1:2009

EN60950-1:2006 + A11:2009 +A1:2010;

EMC Compliance Condition Standard / Criterion

EMI Standard EN55022, Class B

ESD

Radiated Immunity

Fast Transient

Surge

Conducted Immunity

EN61000-4-2, Criteria A

EN61000-4-3, Criteria A

EN61000-4-4, Criteria A

EN61000-4-5, Criteria A

EN61000-4-6, Criteria A

Speciﬁcatins are as in individual converter datasheets with the following exceptions:

Panel Mount Version (mm)

19.0

101.6

57.15

Mounting Centres 92.1

CMC

Fuse

TVS

FET

Trim(3)

LED

Heat-sink Plate

17.2

3.5

6.35

Pin Connections

Pin # Single Dual

1 +Vin +Vin

2 -Vin -Vin

3 CTRL CTRL

4 NC NC

5 -Vout -Vout

6 +Vout Com

7 NC +Vout

NC: No Connection

Tolerance: X.X ±0.25mm

PD-4 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Power Module

Series

Speciﬁcatins are as in individual converter datasheets with the following exceptions:

Selection Guide typical at nominal input and 25°C unless otherwise noted

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Inrush current nominal Vin and full load 15A

Start-up time Power up

CTRL Pin

100ms

20ms

ENVIRONMENTAL

Parameter Condition

Value

Thermal Impedance 4.2°C/Watt

SAFETY AND CERTIFICATIONS

IEC General Safety

EN General Safety LVD20110124 IEC60950-1, 2nd Edition, 2005 + A1:2009

EN60950-1:2006 + A11:2009 +A1:2010;

EMC Compliance Condition Standard / Criterion

EMI Standard EN55022, Class B

ESD

Radiated Immunity

Fast Transient

Surge

Conducted Immunity

EN61000-4-2, Criteria A

EN61000-4-3, Criteria A

EN61000-4-4, Criteria A

EN61000-4-5, Criteria A

EN61000-4-6, Criteria A

DIMENSIONS and PHYSICAL CHARACTERISTICS

Parameter Type Value

Material Chassis Aluminium

Package Dimensions (LxWxH) 125.0 x 57.6 x 24.5mm

Package Weight 182g

Connectors Screw Terminal

continued on next page

DIN-Rail Version

PACKAGING INFORMATION

Parameter

Type

Value

Packaging Dimensions Cardboard Box 146 x 75 x 29mm

Packaging Quantity 1pc

DC/DC Converter

Power Module

Series

PD-5

REV.: 1/2016www.recom-power.com

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

125.0

LED

1234

5678

Trim(3)

116.3

57.6

24.5

DIN Rail Version (mm)

Pin Connections

Pin # Single Dual Triple

1 CTRL CTRL CTRL

2 -Vin -Vin -Vin

3 -Vin -Vin -Vin

4 +Vin +Vin +Vin

5 NC NC +Aux

6 -Vout -Vout Com

7 +Vout Com -Aux

8 NC +Vout +Vout

NC: No Connection

Tolerance: X.X ±0.5mm

PACKAGING INFORMATION

Parameter Type Value

Packaging Dimensions Cardboard Box 146 x 75 x 29mm

Packaging Quantity 1pc

The product information and speciﬁcations are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written

consent. A safety-critical application is deﬁned as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inﬂict bodily harm or damage property. The buyer

shall indemnify and hold harmless RECOM, its afﬁliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.

Notes:

Note3: Trim option depending on converter series, please check datasheet of the converter series

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

RECOM:

RPM30-1205SE RPM30-1212DE RPM30-1212SE RPM30-1215DE RPM30-1215SE RPM30-123.3SE RPM30-

2405SE RPM30-2405SEW RPM30-2405SEW/N RPM30-2412DE RPM30-2412DEW RPM30-2412DEW/N RPM30-

2412SE RPM30-2412SEW RPM30-2412SEW/N RPM30-2415DE RPM30-2415DEW RPM30-2415DEW/N RPM30-

2415SE RPM30-2415SEW RPM30-2415SEW/N RPM30-243.3SE RPM30-243.3SEW RPM30-243.3SEW/N RPM30-

4805SE RPM30-4805SEW RPM30-4805SEW/N RPM30-4812DE RPM30-4812DEW RPM30-4812DEW/N RPM30-

4812SE RPM30-4812SEW RPM30-4812SEW/N RPM30-4815DE RPM30-4815DEW RPM30-4815DEW/N RPM30-

4815SE RPM30-4815SEW RPM30-4815SEW/N RPM30-483.3SE RPM30-483.3SEW RPM30-483.3SEW/N RPM40-

120512TG RPM40-120515TG RPM40-1205SG RPM40-1212DG RPM40-1212SG RPM40-1215DG RPM40-1215SG

RPM40-123.3SG RPM40-240512TG RPM40-240515TG RPM40-2405SG RPM40-2405SGW RPM40-2405SGW/N

RPM40-2412DG RPM40-2412DGW RPM40-2412DGW/N RPM40-2412SG RPM40-2412SGW RPM40-2412SGW/N

RPM40-2415DG RPM40-2415DGW RPM40-2415DGW/N RPM40-2415SG RPM40-2415SGW RPM40-2415SGW/N

RPM40-243.3SG RPM40-243.3SGW RPM40-243.3SGW/N RPM40-480512TG RPM40-480515TG RPM40-4805SG

RPM40-4805SGW RPM40-4805SGW/N RPM40-4812DG RPM40-4812DGW RPM40-4812DGW/N RPM40-4812SG

RPM40-4812SGW RPM40-4812SGW/N RPM40-4815DG RPM40-4815DGW RPM40-4815DGW/N RPM40-4815SG

RPM40-4815SGW RPM40-4815SGW/N RPM40-483.3SG RPM40-483.3SGW RPM40-483.3SGW/N RPM60-2405SG

RPM60-2405SG/N RPM60-2412SG RPM60-2412SG/N RPM60-2415SG RPM60-2415SG/N RPM60-243.3SG

RPM60-243.3SG/N RPM60-4805SG RPM60-4805SG/N