AOT20N60/AOTF20N60 600V,20A N-Channel MOSFET General Description Product Summary The AOT20N60 & AOTF20N60 have been fabricated using an advanced high voltage MOSFET process that is designed to deliver high levels of performance and robustness in popular AC-DC applications.By providing low RDS(on), Ciss and Crss along with guaranteed avalanche capability these parts can be adopted quickly into new and existing offline power supply designs. VDS ID (at VGS=10V) 700V@150 20A RDS(ON) (at VGS=10V) < 0.37 100% UIS Tested 100% Rg Tested For Halogen Free add "L" suffix to part number: AOT20N60L&AOTF20N60L Top View D TO-220F TO-220 G G D S AOT20N60 G D S S AOTF20N60 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol AOT20N60 Drain-Source Voltage VDS 600 Gate-Source Voltage 30 Continuous Drain Current VGS TC=25C TC=100C AOTF20N60 V 20 ID Units V 20* 12 12* A Pulsed Drain Current C IDM Avalanche Current C IAR 6.5 A Repetitive avalanche energy C EAR 630 mJ Single plused avalanche energy G Peak diode recovery dv/dt TC=25C Power Dissipation B Derate above 25oC Junction and Storage Temperature Range Maximum lead temperature for soldering purpose, 1/8" from case for 5 seconds Thermal Characteristics Parameter Maximum Junction-to-Ambient A,D EAS dv/dt 1260 5 mJ V/ns W 80 PD 50 0.4 TJ, TSTG -55 to 150 W/ oC C 300 C TL Symbol RJA RCS AOT20N60 65 AOTF20N60 65 Units C/W 0.5 0.3 -2.5 C/W C/W Maximum Case-to-sink A Maximum Junction-to-Case RJC * Drain current limited by maximum junction temperature. Rev2: Dec 2011 417 3.3 www.aosmd.com Page 1 of 6 AOT20N60/AOTF20N60 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter Conditions Min ID=250A, VGS=0V, TJ=25C 600 Typ Max Units STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage BVDSS /TJ Breakdown Voltage Temperature Coefficient IDSS Zero Gate Voltage Drain Current ID=250A, VGS=0V, TJ=150C 700 V ID=250A, VGS=0V 0.8 V/ oC VDS=600V, VGS=0V 1 VDS=480V, TJ=125C 10 IGSS Gate-Body leakage current VDS=0V, VGS=30V VGS(th) Gate Threshold Voltage VDS=5V, ID=250A RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=10A gFS Forward Transconductance VDS=40V, ID=10A VSD Diode Forward Voltage IS=1A,VGS=0V IS ISM 3.8 4.5 n V 0.29 0.37 1 V Maximum Body-Diode Continuous Current 20 A Maximum Body-Diode Pulsed Current 80 A DYNAMIC PARAMETERS Ciss Input Capacitance Coss 100 A Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance Gate Source Charge Qgd Gate Drain Charge S 2448 3061 3680 pF 190 273 360 pF 13 22.8 35 pF VGS=0V, VDS=0V, f=1MHz 0.7 1.4 2.1 48 61 74 nC 14 18 22 nC 12 24 36 nC VGS=10V, VDS=480V, ID=20A tD(on) Turn-On DelayTime tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Qrr Body Diode Reverse Recovery Charge IF=20A,dI/dt=100A/s,VDS=100V Body Diode Reverse Recovery Time 25 0.69 VGS=0V, VDS=25V, f=1MHz SWITCHING PARAMETERS Qg Total Gate Charge Qgs 3.2 VGS=10V, VDS=300V, ID=20A, RG=25 IF=20A,dI/dt=100A/s,VDS=100V 57 ns 125 ns 128 ns 88 ns 384 480 580 8 10.5 13 ns C A. The value of R JA is measured with the device in a still air environment with T A =25C. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150C, Ratings are based on low frequency and duty cycles to keep initial TJ =25C. D. The R JA is the sum of the thermal impedance from junction to case R JC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. G. L=60mH, IAS=6.5A, VDD=150V, RG=25, Starting TJ=25C THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev2: Dec 2011 www.aosmd.com Page 2 of 6 AOT20N60/AOTF20N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 40 VDS=40V 10V 30 -55C 6.5V ID(A) ID (A) 10 20 6V 125C 1 10 VGS=5.5V 25C 0 0 5 10 15 20 25 0.1 30 0 2 VDS (Volts) Fig 1: On-Region Characteristics 0.6 6 8 10 Normalized On-Resistance 3 0.5 RDS(ON) () 4 VGS(Volts) Figure 2: Transfer Characteristics VGS=10V 0.4 0.3 0.2 10 20 30 40 2 1.5 1 0.5 0 -100 0.1 0 VGS=10V ID=10A 2.5 50 -50 0 50 100 150 200 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 1.2 1.0E+02 40 1.0E+00 IS (A) BVDSS (Normalized) 1.0E+01 1.1 1 125C 1.0E-01 1.0E-02 25C 0.9 1.0E-03 0.8 -100 1.0E-04 -50 0 50 100 150 200 TJ (C) Figure 5:Break Down vs. Junction Temperature Rev2: Dec 2011 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AOT20N60/AOTF20N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 15 10000 Ciss VDS=480V ID=20A Capacitance (pF) VGS (Volts) 12 9 6 1000 Coss Crss 100 3 0 10 0 20 40 60 80 100 0.1 1 10 100 VDS (Volts) Figure 8: Capacitance Characteristics Qg (nC) Figure 7: Gate-Charge Characteristics 100 100 10s RDS(ON) limited 10 10s RDS(ON) limited 100s 10 100s 10ms 1 ID (Amps) ID (Amps) 1ms 1ms DC DC 1 0.1 10ms 0.1s 1s 0.1 TJ(Max)=150C TC=25C TJ(Max)=150C TC=25C 0.01 0.01 1 10 100 1000 VDS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area for AOT20N60 (Note F) 1 10 100 1000 VDS (Volts) Figure 10: Maximum Forward Biased Safe Operating Area for AOTF20N60 (Note F) Current rating ID(A) 25 20 15 10 5 0 0 25 50 75 100 125 150 TCASE (C) Figure 11: Current De-rating (Note B) Rev2: Dec 2011 www.aosmd.com Page 4 of 6 AOT20N60/AOTF20N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS ZJC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC RJC=0.3C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD 0.01 Ton T Single Pulse 0.001 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 12: Normalized Maximum Transient Thermal Impedance for AOT20N60 (Note F) ZJC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC RJC=2.5C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD 0.01 Ton T Single Pulse 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 13: Normalized Maximum Transient Thermal Impedance for AOTF20N60 (Note F) Rev2: Dec 2011 www.aosmd.com Page 5 of 6 AOT20N60/AOTF20N60 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC DUT - Vgs Ig Charge Res istive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs + VDC 90% Vdd - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf t off Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L EAR= 1/2 LI Vds 2 AR BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Tes t Circuit & Waveforms Qrr = - Idt Vds + DUT Vgs Vds - Isd Vgs Ig Rev2: Dec 2011 L Isd + VDC - IF trr dI/dt IRM Vdd Vdd Vds www.aosmd.com Page 6 of 6